Samsung Self Clean Front Load Washer Washing Machine Cleaning Mode

[@Face_Reality]

Tips to make your washer last longer: only put detergent to the max fill or less. This is an efficient washer and does not need a lot of detergent. Using excess detergent will cause it to corrode on the inside overtime which will cause it to stop working. Many people make this mistake all the time thinking more soap is better and cleans better. So wrong. You don't need much. And you want to use a low sudsing detergent. Also, do not only use cold water all the time. Clean your washer at least once a month on cleaning mode. Run a wash cycle on the hottest water temperature setting with NO DETERGENT and NO CLOTHES to make sure all the soap scum and buildup is removed to prevent corrosion. Also, NEVER EVER overload the machine. This will cause wear and tear and eventually knock the barrel off balance and your machine will basically be DONE. Make sure you change/clean the filters regularly. Front load machines are more sensitive and require more TLC. I learned this from a tech...

[@oshawacash]

Leaving the door open after washing helps as well

[@michaelbond1791]

"I got out the owners manual on this thing" LOL I dont think anyone has ever read the manual!. good video, thx

[@kristyleavell5734]

I love love love my Samsung washer and I have had it for 4 years no issues! This will be my first time using the self clean and I didn’t add anything (I will next time). I dont have mold smelling clothes BUT they don’t smell great anymore so I’m hoping this helps. Thanks for the video!

[@laoms0812]

Thank you for sharing your great tips👌

[@hapaboy0808]

I have this same washer, had it since 2016 never ran the self cleaning mode until today. I was going to put vinegar in there, but read somewhere that Samsung did not recommend using vinegar as it could damage some of the internals, instead they suggested using bleach in the compartment. The cycle took 4 hours to complete. Like you, I always leave the washer door open as well as the detergent drawer after every wash to keep moisture from building up. Also I completely pulled out the detergent drawer and soaked it in a bucket of hot water and vinegar to break down the gunk of liquid softener build-up in the tray.

[@GrannyTheCellar]

I have it too

[@HenryLewisRadd]

Dear God, videos like this are furthering humanity, thank you David Lyons! :)

[@percyblakeney3743]

Agreed.

[@santitadesergio]

Also if you have read the manual it will tell you not to close the door to your washer. Closing the door doesn’t let air in to help dry out the washer normally therefore creating a wet environment where mold can grow up. All front load washers need to have the front doors left open and wiped out especially the gasket.

[@MiyahSundermeyer]

I just ordered this washer and I have been doing lots of research on front loader maintenance and so far they have been helpful.

[@tarageering7375]

I hate this washer. It is not worth the money.

[@blitzkrieg7652]

thank you this was super helpful since i bought a pair of them used from a coworker and they smelled a bit moldy, running the self clean cycle now :D thanks!

[@Amarie730]

@Samantha Morris I scrubbed my rubber rim first with gel bleach and vinegar. Attempting to get all of the hair out. Added a washer cleaning set then ran the self cleaner. Hopefully that all works and I may run it one more time to be sure

[@khay5939]

I have exact washer. My clothes were moldy smelling too. I was really upset. Never had this happen before either . I Was planning to take them to the laundromat to try to get them clean ! Lol! So thank you so much! It's very helpful! Saved me from a trip to the laundromat. Hahaha! Finally getting clothes clean again! Lovely.

[@thorn3686]

so, are you saying you did this cleaning procedure and it worked ???

[@AL-ck3hg]

I think the manual says not to leave the door closed, and to wipe off the door after you're done washing for the day. I try never to close the door when it's not in use, and I think it helps. Our previous washer, which we replaced with this model, had that issue, but it was pretty old and we always kept it closed. So that's another thing you can try. We've had ours for around a year, I think, and I'm going to try the self-clean mode today.

[@lanetteshark5860]

Wow! The moisture eliminator is overkill. Leaving the soap drawer and drum door open is sufficient for drying. Good tips!!

[@amayas570]

I pull up the lip of the rubber front loader, and clean it out! It can get filled with dirt if not cleaned regularly! Also leave the door on your washer open to let it air out after every wash!

[@jorgetoloza269]

Dude thanks alot, my towels were smelling like mildew....thanks again..From Ft Lauderdale

[@thedrunkengamerx]

The moisture traps are a top notch idea. I might have to try some of those. Im curious to find out how well the cleaning process turned out! I moved into an apartment with one of these installed, and the previous owner was clearly clueless, as there was an animalic scent in the washer. Just draining the emergency hose almost made me gag, and the filter was...nvm. im just searching for ways to keep this beast clean! Lol. Thanks much for the video!

[@nickmandalaywala4780]

To avoid the mold smell keep the door open when it not being used this will allow air to flow through it

[@ashlie633]

well did it make ur clothes smell any better after u did the self clean cycle?

[@DiabeticlySweet87]

It does actually. Always remember to dry out your washer after every use and leave the door ajar or open after use to keep that musty smell away.

[@minivanventuring]

The affresh tablets once a month are great! Towels and sheets use vinegar in the rinse cycle promise it works

[@HiddenAgendas]

Dude, just switch to Charlie Soap for your detergent. Ever since I made the switch, the washer is clean, mold free and even the rubber seal is super clean. It use to have mold buildup. But after running a few cycles of self-clean with the charlie soap, My washer is no longer having smell, mold issues. I do a self-clean with Charlie Soap about every 2 months. Good thing is, it also cleans your washer when you run a load. Look it up! Every other detergent leaves residue and causes buildup. Charlie Soap is the only soap that doesn't.

[@MKA88888]

Hello! May I ask you. Which one detergent you buy: liquid or powder? Thanks 🙏

[@HiddenAgendas]

@@MKA88888 liquid

[@charlitoguzman6414]

I wash getting black mold stains all over my whites and towels. It was because there was mold growing underneath the rubber seal that fits to the door. I pulled back the rubber seal and mold was everywhere. It was a job cleaning all that out. Now I know to keep the door open on these front loaders. Because water sits behind those rubber seals and forms mold.

[@Chorizo1]

Hey man, thanks for the video! I'm currently having the same problem with the same model washer, dry dots and all, but don't have the owners manual.

[@jeffspicoli6172]

Great video, helped me out. Thank you.

[@ernestlunsford3964]

awsome , same washer will try all this !! very helpfull thank you

[@doogieRN1]

I was about to wash some clothes in my brother's washing machine like this, but then thought "I wonder if he has ever "washed" the washing machine. I do this to mine after washing my clothes, my mother's clothes, the house linens~ bed sheets, towels, and then the bathroom rugs last. Our washing machine is not working now so he said I can use his. Hopefully he won't be upset due to the length of this cleaning cycle, I want to leave the door open, but they have cats . I cleaned the lint trap as I have seen this done somewhere else. I should look on here first to trouble shoot our washer see if I can figure out what's wrong with it before calling a repair man, but I know when not to do something I cannot. But thank you for this video, will let my brother know how to care for this washer...ran out of baking soda though and a little voice in my head told me to throw some vinegar in there but just went ahead after cleaning the door and rubber gasket?? around the entrance of the tub and then just cleaned it. I should have started it when I was straightening up the pantry, would have been done by now... oh well next time. Thanks again

[@DiabeticlySweet87]

Also clean the lint trap regualry and drain it using the drain hose where that door is. To get extra water out I use a bulb syringe which helps.

[@charlitoguzman6414]

The front loaders have trouble draining all the water out after the wash is complete. Take a dry towel and wipe behind the rubber seal that fits around the door. Also always leave the door open when your done with your wash. So it will dry out. Then you should be good.

[@DiabeticlySweet87]

The little drain hose where that door is on the bottom of the washer can be used after a wash to drain excess water.

[@Gollammeister]

Wipe inside of door and rubber seal including the folds of rubber seal plus drum soak up excess moisture basicly then you leave detergent drawer open ajar and also washer door wide open after every load this will allow fresh air to circulate Once a month use a descaler product I would never use a bleach vinegar acid type of product on a rubber seal or in a washer period as a lot of seals rubber pipes etc could in theory could corrode cause damage but I'm no expert My washer is a pre owned model ive had mine for 3 plus months no probs as yet

[@mrs.l6084]

Gollammeister thank you for this comment it’s great too because we haven’t been leaving the drawer open or have we been wiping out the rubber seal we have been drying the glass window and the baking soda and vinegar sounds like a great idea that he uses in this video

[@santitadesergio]

Gollammeister well said

[@lupojacobo9892]

Just the self clear without any product for the tub and chlorine for the door seal. That's all you need..

[@ldmcnutt]

The biggest culprit for fungus smell on clothes is delaying too long between washing and drying. If you leave wet clothes in washing machine for 24 hours, the fungi; molds, mildews and yeast will start to rapidly grow, unchecked. The "check" is at the initial washing. The detergent will kill 99%+ of the fungi. So your clothes should not smell bad if you dry them, fresh out of the wash, even if your washing machine smells like fungus. Another way to think of this is compare to gross, sweaty, smelly socks. That smell is from fungus. You wash them and the detergent kills most of them, which makes the odor go away. Then you dry them and the surviving ones are forced to go into a dormant, encapsulated state to survive the dry conditions. Then your socks smell fine until 8+ hours of moist conditions the next time you wear them.

[@InfamousBlonde]

Thank you for this video! Very helpful tips & I am definitely picking up some of those moisture removers. PS - it wasn’t too long :)

[@serenitywatson2259]

basic way to keep your washer from making your clothes smell is to simply leave the door cracked open, especially after a wash. it needs to vent.

[@kaioh6]

Apparently you and 6 others didn't watch the video entirely. He said he leaves his washer door wide open after every wash and even puts a moisture catcher whenever he isn't using it.

[@5018stormy]

Always leave the washer door open after use. The drum needs to dry. Otherwise, you just incubating molds and spores in that humid and warm environment, if you always keep the door closed. I never have the mold issue, and that is why.

[@abdulhai93]

This is very true. My mom intially told us to leave the door open when cycle ends. We didnt pay much attention. Few months later. Mold buildup on rubber lining of doorn

[@cindycarey6202]

Your Infro on a front loader is the best one I've found! I'm getting a Samsung front loader pair. I was aware of the mold & mildew issues. I almost bought a set 15 -17 years ago & opted for a top loader again! This time I wasn't going to do that! So you have been clear & the most informative.. When you mentioned mold smell a light bulb went off in my head, my wash clothes have an odor. It was like what is that smell???? Now I know!! I don't smell it on anything else yet it most likely is there.. I didn't think it was an issue with the top loaders & I use that Afresh Tab in my washer monthly!! The washcloth using it on you face you get it close up!! Those things you got at the $1.00 store I will be buying them too!!! But are they empty containers??? Plus just how do they work ??? I did quite get that part of it clearly,, Thank You & your video wasn't long at all!!! Thank You Cindy

[@lyonsdavid]

They are moisture absorbers they have little Crystal like things inside that turn to water over time and they actually work great, another thing I did after this video was started using borax, I put a half a cup of Borax with every wash and my clothes come out clean and never smell like mold or mildew anymore! Hope this helps you and thank you for the kind words for my video.

[@cindycarey6202]

So Borax can be used with ALL clothes colors also??? Will pick these things up this week they will be bring my washer this next Saturday!!! Again Thank You!!!! Enjoy Your Week End!!

[@lyonsdavid]

@@cindycarey6202 yes borax is safe to use on all washables, and an added benefit acts as a fabric softener too!

[@cindycarey6202]

@@lyonsdavid Thank You!!!!

[@RR-sn6cq]

Great tips. I was having the same problem. I just finished the clean cycle. I'll let you know how it turned out.

[@thorn3686]

it''s now 4 months later....It must still be running

[@KimMichelle]

Been 6 months it must still be going yall

[@inkfilledlungs]

8 months now. R R are you okay? Self clean shouldn’t take this long.

[@RR-sn6cq]

Lol sorry for the late response. It worked perfect.

[@acereport8939]

Leave the door open after using and mold will not grow. Never shut the door when it’s humid and wet inside. Same for the dishwasher. Make sure it’s bone dry before closing the door.

[@venuslunsford5881]

I have the same washer. I just did self clean and it did took 4 hours.

[@Esmiee21]

I have so much suds in my self cleaning mode when I didn’t add any detergent to the cycle. I’m wondering if this is normal or just build up

[@leilanie6353]

I run the self-clean with cleaning vinegar after I’m done with the loads. I ask leave the washer door open to air out especially during the summertime in AZ. Drain and clean the little box on the left bottom corner after doing laundry.

[@thomasstrong7433]

These washers must have proper ventalashion when use in hot cycle it will actually form mildue on the in side of the washer I have taken several apart inside attached to the tub in most cases they have gotten better over the years most units are in landuray closet's with no venting so I would also open the doors if in a landuray closet's when using hot cycles .

[@infamoustimes2927]

I love my Samsung Washer. I never appreciated an appliance as much as I have our new Samsung Washer. Samsung Active Wash 5.2 does everything and more. Sorry, I know I sound like I'm advertising it but as a father I failed to understand the importance of having a fantastic Washer.

[@justdevine864]

Good tip about the soaker, thanks for this tutorial.

[@michaelhickman3076]

I have the same washer and same problem which I solved. Yes you want to keep door open when not in use or the rubber will start to mold and cause black spots on the rubber, fix that by scrubbing the rubber with bleach. Why your clothes stink NOT ENOUGH WATER........ You are not getting a thorough rinsing of the detergent out of the tub and clothes. FIX, there are two screws on the backside top of the washer remove them. The top will side back so that you can remove it, it takes a little effort. Now on the inside, on the right looking at the washer, close to the front behind the power button you will see a blue little box with a rubber hose going to it, that is a transducer which controls the water level in the tub. Unplug the the wire harness, now if you reach behind the metal fold of the washer panel that the transducer snaps into you can easly remove it without breaking the clips be careful. Now remove the hose which is much easier with the transducer is removed. Now with the transducer in your hand you will notice 4 black tabs that you must push in to separate the blue part from the black part, the black part is the transducer and the blue part is the cover. The easy way to separate these two parts is to take a pair of scissors and cut the blue cover in two spots on each tab, once that is done they will come apart easy. DO NOT DROP!! Now you will see a white phillips screw with red lock tite, mark a starting point with sharpie, turn screw two turns, thats it. Assemble transducer use heavy rubber bands to hold the two parts together, I used 2 rubber bands that the grocery uses to keep asparagus together. install hose, snap in and connect the wire harness DONE. This will help alot in keeping the detergent dispenser and rubber seal clean and your clothes from smelling like sh*t. My big issue was towels, the damper enviroment in the bathroom amplifies the smell in towels. I'M ALL GOOD NOW!!!

[@lyonsdavid]

Thank you very much for that information, after I made this video I started adding a half a cup of borax inside the washer drum with every load of laundry and only a tiny bit of detergent and the mold smell on my clothes and towels is completely gone, I don't know if it's all because of The borax, or a combination of keeping the washer clean and dry, but I'm so thankful that it is mold and stink free now!

[@michaelhickman3076]

@@lyonsdavid There is mold in the tub housing that you can't see, if you increase the water your self cleaning is more effective it helps to keep everything in suspense. And during the first part of cleaning it's cold water, it drains and then hot water after it stops filling open your soap dispenser and pour white vinegar in its more effective in hot than cold. You could even first put baking soda in and wash it in with a mason full of hot water then add vinegar.

[@michaelhickman3076]

One more thing when doing a self cleaning the first part of the clean is a fill, clean and drain of cold water, last 2-3 mins. Second and third fill is hot water which takes place within the first hour. After the third fill, clean and drain the water is not completely drained there is water still in the drum housing that you can't see. The tub moves back and forth to clean the housing. Be sure to get some vinegar in on the third fill of hot water. This cleaning will last an hour cleaning the housing then it fill again but it will give you a fault code OE don't worry about it power off and run another self cleaning a second time then run a spin and drain. If you do change the setting on the transducer it will give a fault code OE which is the level sensor (transducer). This won't happen during normal washing only during self cleaning cause there's alot more water than normal without changing the transducer setting.

[@SinaBahrami]

I feel like you need to make a video about this.

[@mrs.l6084]

Michael Hickman this seems like a lot to do wouldn’t calling up a repair person be best because it might make it worse if a person doesn’t know what they are doing here with their washing machine

[@lvballers9638]

Thank you for helping thank you for your time.

[@joyceng3613]

I have a question, so you put baking soda in the drunk not in the sill right?

[@davidr4716]

There is also a "Minimum" and "Maximim" length to put your Drain Hose into your Drain Pipe. Read your manual. Installer from Costco put Drain Hose down drain pipe 20" during installation. . Manual for my Samsung WF45R6100AV says Min=6" and Max 9". If over 9", then mold may be introduced into Drain Pipe and Washer. Yup, just another thing to check out re mold.

[@Jillian60]

Supposed to Wipe rubber gasket out after each use.Wipe all around inside the gasket...top, sides, bottom, until it’s dry and no mold or mildew. Wipe the door dry, inside, top, bottom. Keep door open so the drum airs out....Vinegar may eat away at rubber parts and hoses?

[@jcaimhigher5952]

You don't have to do it after EVERY use. If that were the case then it would be useless for anyone to want to purchase the washer. Simply leave the door open a bit and leave open the soap/softener drawer enough to let air flow and you're fine. You are not going to eliminate dark color staining in the gasket but you will reduce or eliminate smell and problems in between you cleaning the gasket. Excellent washer and the dryer is great as well, but don't think you can't sleep at night unless you wash your washer after you wash your clothes. Hopefully that makes sense...

[@jeremyoshea9502]

Scum trap, lint trap is the dryer! Lol good video though, thank you for your time!

[@keasl7065]

I just used tide and bleach as you normally would in a normal wash, but on the self clean mode

[@iamthebesfromyou]

Just use bleach. If you want to add something to bleach then vinegar and baking soda is a good addition. Main thing is to leave door ajar to let it air out as that is a big culprit for mold.

[@jhezreel6403]

@@iamthebesfromyou Mixing bleach and vinegar is not safe. Bleach reacts with the acetic acid in vinegar to produce toxic chlorine gas. Chlorine is a yellowish-green gas that attacks mucous membranes and the respiratory system and can be potentially fatal.

[@shevettejones7553]

This smell is usually from fabric softener build up on your clothes esp. towels. The fabric softener will deposit a film on fabric and clothes will not dry completely. Thus the mold and musty smell. (You can sometimes feel the film on the fabric) . Wash and dry clothes a few times and don't use fabric softener on towels ever...And if you like fabric softener only use it sometimes..

[@christopherrevilla6478]

Thank you ! Big big big help !

[@Mr1985Badass]

I have this same washer. I keep seeing comments about leaving the door open. I can't do that due to the fact that my washer and dryer are by the door we go in and out of. Plus, I have small kids I don't want messing with it. Any other tips besides keeping the door open?

[@Jose_Ole_Posole]

Do you add some type of soap for the self clean setting???

[@edithcanole2457]

Thanks this was super helpful we're going to do it today

[@mrs.l6084]

Your so Awesome! I’m so happy you made this video...

[@lyonsdavid]

Well then, I'm glad I did, thank you for the kind words!

[@tonytheetiger3750]

Not just the self clean but you need to clean out the filter on the bottom also.

[@ivankirola2707]

Je cleaned it.

[@Varga5]

Thank you for your video!!!

[@rachelcross27]

I lost my owners manual trying to find how to start self cleaning mode. Not one video says how to start the self cleaning mode. It sounds stupid to ask bc there’s a self cleaning “button” but I just wanna kno it there’s other buttons I’m supposed to b pushing or what 🤷🏻‍♀️ I have the Samsung super speed steam vrt & 4 boys & 4 dogs & last wash I did stained my clothes (I wash all my clothes separate from hubby & my boys) anyway I was furious & need to clean it

[@yulingyong1682]

Thank you for your time!!

[@tarageering7375]

I have this machine and so irritated with it. So gross. I smell like mold constantly. I'm doing what you have said. Hopefully it works. I'm just a mom and have zero clue what I'm doing. Hopefully I get it right. Thank you.

[@margo-pl1ww]

Same here, I'll never buy a front loader again.

[@raymodg.8039]

got the same model you i did good job on the video mines still going for 1hr more i didnt put soap or anything mighta done a load or two, its got alota suds i dont know how they got there but its lookin good

[@raymodg.8039]

i got the stainless steel one

[@abdullahi23_63]

@@raymodg.8039 lol same

[@ldmcnutt]

rather than a vacuum, I'd recommend paper towels. They clean more slime off the surface than the vacuum can.

[@lauriecarlson6586]

Mine never has that much water in it! I just had it on the clean cycle and I would barely see any water. Maybe that is my biggest problem?

[@erikal5218]

You’re probably keeping the door fully closed when the washer is not in use? That’s really what causes that.... Just don’t seal your door shut, when it’s not in use, and you should be good to go! (after you run the clean cycle, of course)

[@sandrareyes2136]

Very much helpful! Thanks alot

[@alexp-d3t]

What type of flashlight are you using?

[@cghowell3]

Did your clothes smell like vinegar afterwards?

[@angelbahena9723]

Good video thanks man

[@ivankirola2707]

Old vintage machines never needed cleaning.

[@joeyvasquez6471]

Can a guy use chlorine during the 4hour self clean cycle?

[@AnneGoggansQHHT]

I also add washing machine cleaner tabs occasionally when cleaning. I use essential oils too, mold hates essential oils 😉 but I’m not a professional. You need to take apart detergent compartments too.

[@ga12f12o]

To wash your clothes, I recommend wash powder. It causes less sticky buildup In the machine.

[@starchild644]

The water is very dirty. Suggest you use de scaler from Bosch made for front-loader. Then washer cleaner from Bosch about every three months. Also, fan in area to circulate air flow. Dry clean rubber gasket at the end of every wash day. If you have towel cycle or sanitize put all your towels through that cycle. Will take the smell out. Use no more than two tablespoon of laundry detergent liquids. Alternate to powder detergent every once and awhile. Cold washes are not really good use warm to help the machine get the detergent desolved. After washing touch the inside of the drum if it feels slick or gummy you used to much detergent. Then do all the other things you are doing. You won’t have another problem. I do the descaler and cleaner about a week or two apart. It makes a difference.

[@lyonsdavid]

Thank you I will do all of your recommendations, plus I wanted to add that after this video I started adding 1/3 cup of Borax to every wash and it has helped more than anything!

[@starchild644]

Borax is antifungal. Also, softens water making detergent more efficient. Some people confuse it with boric acid, but it is not the same. There has been a learning curve for me with these front loader washers. In a basement it really requires the door and draw to be left fully open. If machine is in climate controlled area may get away with leaving slightly ajar, but think door open all the way is best with regular maintenance. I hear a lot of people say it needs more water to clean, but I don’t think so. Two things happened phosphates which make laundry detergent lift and whitened were removed. The other is lower wash temperatures in the name of energy conservation. Europeans use very hot water for towels, linens, and whites. These machines will boost water to 150 or 170 depending on internal heater. Some have cycles that say boosted heat or whites or sanitize. Your cleaning cycle no doubt used the internal water heater on the machine to clean the machine. I watch a lot of Lorain appliance reviews and that creator services appliances he says most temperatures classified as warm aren’t really warm and echoed what I told you about seldom using cold to wash. The other thing I noted that plastics in the machine tend to hold the gummed up detergents which then becomes a medium for mold growth. People think their top loaders avoid this problem but they really don’t it is just at the bottom of the tub, because all machines retain some water. The machines with no agitators have no filter or coin trap that is accessible for clean out and it is important to clean that out periodically. Off my soap box so to speak. Just love to share what I have learned over the years.....

[@Rylet]

Wow. Is there a washer you can recommend for the lazy people like me? That's more maintenance than my car, and I have to be real with myself, I'm not going to do all that.

[@starchild644]

Rylet it isn’t difficult to take care of a front loader. Most of it involves leaving the detergent door and big door open. Every few months you run a clean tub or sanitize cycle with cleaner. Every six check trap and clean. At the end of your wash for the day wipe down the seal and tub door. The info about detergent can be digested to this don’t use to much. Be sure you are washing towels on hot or temp boost. Wash very seldom with cold water this lets most of the detergent get used and rinsed out. It isn’t hard just different.

[@mariochico3936]

Thank you so much!

[@rcairflr]

You do a wash cycle with the baking soda first and then do another wash cycle with the white vinegar. You DON'T do them at the same time.

[@Sevignn]

Brilliant

[@RATrainProductions-gj4km]

Thank you for the video

[@kambiztaleghani]

Thanks very helpful.

[@michaelpolicastro1437]

It puts the lotion on its skin or it gets the hose again....

[@lyonsdavid]

WTF does a quote from SOTL have to do with my video...?

[@marvingill3539]

Great video, thanks

[@TheAmakoy01]

Thanks buddy 👍👍👍

[@ivankirola2707]

The best combination for self clean is some powder detergent and baking soda.

[@sillygirl1717]

The water that I drained out of my washer where the filter is was just pure disgusting!! Oh did it smell terrible. I am going to try the baking soda and vinegar and see if that helps... Wish I had a self cleaning on my machine..

[@KillerRaptorr]

90% of all front load washers will need to be scrub with a cleaner on the inner Rubber seal of the door. There's two flaps normally that keep the water inside the unit when the door is closed. Cleaning this will help alot. This is mainly where mold and other junk will sit.

[@thorn3686]

too bad you didn't wait one day to post until you had done the procedure...then you'd have something to comment about

[@aka85DivaMom]

Thank you! About to use my self-clean cycle now. Having a little moldy smell and getting the ‘over suds’ code lately after a little short of 2 yrs of use.

[@lupojacobo9892]

May be because used more soap than what its recommended

[@DiabeticlySweet87]

Also use pods. For some reason using liquid soap can damage? I'm not sure but using pods are better for the washer.

[@TheHunnyBeee]

keep your door open. do not close your washer door.

[@rockwellmath]

I understand why you'd use vinegar, but why baking soda? That would counteract the vinegar.

[@marco.morel04]

Because baking soda is gritty and abrasive and when the machine spins up it's drum with water it acts as a scrubber for the internal parts of the machine

[@Kubulek17]

Marco Morel no it doesn’t ? The baking soda literally dissolved and neutralised the vinegar

[@minivanventuring]

Also the door for the filter in the front needs cleaned

[@rodger4418]

If you use powder detergent you will not have this mold problem .

[@lupojacobo9892]

Gel chlorine first best solution for black spot Brother

[@rathanveereddy9829]

Thank you sir

[@flava4u523]

Buddy here's a trick leave the door opened after every use.and you won't get mold or funky smell

[@Jorgetrescuartos]

What if I don’t have access to hot water?

[@michaelgourski3546]

Leave the door open between the using the your washer

[@mrviking715]

Umm... baking soda and vinegar produces carbon dioxide and quite violently if you mix them together straight. It will blow the stopper of a test tube if you cap it.

[@talorkell]

ummm mixed with large portions of water will not have the same effect

[@Patriot3]

Leave the door open when not in use

[@akak5207]

Model details please

[@angeloddrd]

Awesome! Thank you!

[@jthunderstriker]

Mine gets that smell in my clothes from time to time. I clean the hell out of it and it helps for a couple months but it comes back. I’m about to tear mine apart and clean more hardcore and change the gasket

[@vinha916]

dont close door ever.

[@alexbroking9252]

dude i dont even think mine makes that much water

[@kian4645]

Generally..Samsung washer is a dirty one..after every wash you can see the residue of dirt on it's gasket..while you never see such a thing on Bosch's.

[@petermuhlhoff4305]

Maybe you should buy a proper washing machine. Then you don't have to worry about mold and how to clean the washer.

[@bogdannb]

Peter Mühlhoff washer will never mould if u use proper wash cycles. If you use cold/warm settings all the time EVERY brand will get mouldy.

[@ML-np5ml]

Peter watch your European mouth

[@walterlindsay1895]

Maybe you should shut up !!

[@donakuhn6024]

Unfortunately I’ve been dealing with this for quite a few years and sadly I’m not the only one. And just for your information top loaders do the same thing as far as mold is concerned for some reason all the newer machines don’t drain the water as they used to. So now water sits in the drain hose that connects to the machine and that’s where the mold is growing. I have since learned to put vinegar after I’m done with all my laundry for the day I put vinegar in the drain hose , mine drains into my slop sink. So far for two years now this has worked well. It’s not just the door and the rubber seal around the tub that needs to be dried off.

[@Imadroidgirl]

😂😂😂