Samsung Tab A 10.1 2019-SM-T510 T515 T517 touchscreen only repair

[@smartalservice]

Important update about this model the touchscreen won't work well or not at all if isn't laminate to the display keep this in mind.

[@stefankleijweg8136]

Read this please, before open it!! Its important (thats going wrong with my repair of the SM-T510) that you NOT use something sharp/card at the BOTTOM of the screen. I damaged the cable that control the touchscreen. The screen go’s on, but the screen won’t react at you touch. This i want to share with you.

[@smartalservice]

In my case that adapter from touchscreen to display board was faulty

[@V081WLBlue]

Would have been nice to see how you put new screen(glass) on!

[@smartalservice]

Sadly i have done an other o e and forgot to record video 😔

[@oofieodyssey4349]

​@@smartalservicecan you explain how you did it in the comments?

[@12flipoutn0w]

Whats the process to put new didgitzer on

[@knackwursttv8397]

Is your underlayment Heated or How could you move the wire so easyly?

[@smartalservice]

Shure is 87' heated

[@seasonbowy5913]

Good work

[@smartalservice]

Thank you

[@masoudmontazery907]

Good luck sir

[@FrankieWellman]

Hello I have this tablet and need to remove the battery and have it work only on plugged in power. Can you help me with this.?

[@smartalservice]

I do only screen refurbishing not on board repair but it sems something related to battery connector

[@explosive2005]

What kind of glue did you use to put it back together?

[@smartalservice]

You mean in frame or touchscreen with screen?

[@explosive2005]

@@smartalservice The glue that was used to adhere the touchscreen to the lcd and the glue to assemble the digitizer to the frame.

[@smartalservice]

@@explosive2005 oca adhesive for frame dubleside adhesive

[@rayramos6970]

Hi what is the string you use to separate the glass from thw screen

[@smartalservice]

I use 0.05 wire but if you have good quality wire u can use 0.03 wire

[@NepaYatri]

Bhai kitne me hota he

[@EnAhkami]

Hello Does the touch have to be glued to the screen for the touch to work or does it work even if it is not glued? because i bought new touch and i attached to the screen but it didn't work the seller told me you should glued first ...

[@smartalservice]

Yes. Its strange but this one don't work if you don't laminating with oca on display. Is as your seller says 😊

[@EnAhkami]

@@smartalservice TNX

[@purushottamgurjar9446]

Bhai ye kitne me sahi ho jayega

[@Vargjeteshpirtit]

👏👏👏

[@NIKHIL_KUMAR8930]

Kitna ka h

[@sangnguyen2372]

75 0c

[@arsan9933]

You can't call this a video about replacing the digitizer when you didnt replace the digitizer. You REMOVED the glass and digitizer, but the important part is the part where u show people how use adhesive and reinstall the LCD back onto the tablet. It's the actual point of watching your video. Which in the end was not helpful bc it didn't address the tough issue most people need help with. And was that fishing line you used to separate the LCD from the glass????

[@smartalservice]

You have right but hard part is this laminating touchscreen is not difficult. On this case i faced problem for first time that touchscreen doesn't work without laminating with display and i wos thinking that thst touchscreen wos bad. Thanks for your advice

[@danieledomenicali]

Showing your hands instead of what they are doing, on the objectvery smart!

[@smartalservice]

We are not professional video maker

[@danieledomenicali]

@@smartalservice yes but still... if you are to show something make sure you are showing it!

[@smartalservice]

I will keep in mind this, thank you