Samsung Tablet 12.1 Repair - No WIFI. When NorthridgeFix Boomed

Visit our Sponsor PCBWAY at www.pcbway.com/?from=EH1
Visit our sponsor UCDKEYS. Use Coupon Code N20 to get 20% off Windows 11 Pro License Key. ucdkeys.com/item/ms-windows-1...
⭕ Visit our ecommerce shop and buy all your tools at northridgefix.com
⭕ Need a repair? northridgefix.com/mail-in/
🟢 Sponsorship Inquiry northridgefix.com/advertise/
⭕ Ask questions and Engage in our Forum at northridgefix.com/forum/
⭕ We are an Amtech Flux Distributor. Buy AMTECH NC-559-V2-TF Flux
northridgefix.com/product/amt...
Microscope northridgefix.com/product/mic...
UNI-T UTi260B thermal Camera
northridgefix.com/?s=thermal+...
Grinding pen
northridgefix.com/product/gri...
Low Melt Solder
northridgefix.com/product/low...
NorthridgeFix T-shirts
northridgefix.com/product/nor...
If you are local, drop in and say hello
NorthridgeFix
19365 Business center drive, Unit 7
Northridge, CA 91324

[@PlayMates_]

You pay this man for his experience. No questions asked.

[@Kazwell96]

He's gotta be in the top 50 repair techs world wide if I had to guess

[@ricomajestic]

@@Kazwell96 That's an insult! He's number 1 at least that's what he told me.

[@Kazwell96]

@@ricomajestic top 50 possibly is an insult to his skill. But. 8.1 billion people on earth is a looooooot of people lmfao

[@melstead7937]

Well done on reaching 400k subscribers Alex. For the life of me, I cannot figure out why you had not reached a million. You have one of the best channels on KZbin. I look forward to every video. Thank you for sharing your knowledge with us. I always listen until your little girl says "It's better than factory".

[@Alltakenbla]

It seems that you need about a 10 year presence on yt to hit a mil.

[@markburton3306]

Back in 1990 or so, I worked at a repair centre fixing 8 bit computers (most from schools) and the early 32 bit ones. As we got paid per fix it was essential to recognise and fix faults quickly.

[@Ben79k]

You ARE the superhero. Your repairs are always top notch. You know exactly how much time and effort each device is worth. That's how you keep an efficient work flow. A true master

[@wingnut2893]

I like your no nonsense approach.

[@FuzeTheWholeTeam]

There's not been a single video of yours that I didn't enjoy. keep up the good work man love the videos.

[@repeekyraidcero]

Alex knows time = Money = Life That was the smoothest commercial ever

[@randybland2695]

I like watching you work and explaining the project I'm learn to do this on my days off it seems fun.. I enjoy your channel

[@alltechrepairs1495]

Alex you make it all seem SO EASY. Pity the rest of us are all shovel handed when working these chips. Thanks for the videos.

[@craigherman8652]

Anyone else seeing a bounce on the chip image. Not sure could just be me but image seems jumpy a bit.

[@ahmednahwan1992]

Chip does seems to be bouncin

[@roelandriemens]

I saw it too. It's an optical illusion.

[@Hobypyrocom]

i just wrote about it and then noticed your comment... it seems like in high magnification because the chips are highest the extra small movements of the board are amplified on the highest components because the camera is trying to focus all the view at the same time

[@RaveDaver]

It's hurting what's left of my brain.

[@nextbizzy]

I didn't notice anything.

[@kintag4459]

Thank you Mr

[@rakeshpk9648]

great work indeed !!

[@cerealtech4138]

Huge respect for big boss. It is absurd for me how efficient he is

[@DerDermin8tor]

So at least for your logistics you have something left to improve. Its a joy to see that with great talent, tools and practice even nowadays electronics can be saved an repaired.

Hi, great repair, you have a great skill set! Didn´t like seeing customers repair jobs laying on the floor though, that´s a breakage risk not worth taking. Give the man more work space :)

[@jhunincierto8854]

I like all your video you shared. Techniques and knowledge that you working on.keep it up.

[@robinsattahip2376]

Thanks, I have seen every one of your videos. Wish you had shown the tablet disassembly, that is just as much of an art as repairing them.

[@jasonthejawman5442]

Alex I'm here - Your awesome

[@HBProductions.]

So glad I saw this video. I have this exact tablet, which still works but that BT eventually did fail too. What chip is it? I may have to ship this item to you guys too, despite the costs.

[@gumbypokey7]

You can clearly read the chip info at 5:23.

[@MadMrQ]

great as always

[@KC-nd7nt]

Wonderful to see you busy !

[@MohHagag]

magnificent as always , greetings from Egypt my friend Hussain.

[@safn1949]

400k, well done.

[@djburland]

Brilliant

[@jameskim62]

BRAVO. !!!!!! HOW U KEEP YOUR HAND VERY STEADY ???? SHARE THE SECRETS ???

[@DrDeepspace]

Always a pleasure to watch.

[@julienc.4916]

Metal can for RF shield are generally SMD parts, at least for the one I have met on BLE modules. If that's the case, why don't you heat up and remove the metal CAN instead of cutting it? Being metal it will even ease the process.

[@problematicg3nius912]

I wonder what the pc on the thermaltake p3 core is in for?

[@vicrod74]

Alex is the GOAT!! 🔥🔥🔥

[@phillipchen7749]

good work as usual!

[@istyyyyyy]

I remember watching the video back then and got the idea this channel knew what they were doing. Love to see you grow. Always hope for the best❤

[@jeevanjain6790]

Do you teach too ? I would be sooo happy to learn from a professional like you

[@nextbizzy]

That's what these videos are for ! I've seen lots of people in the comments start businesses with the knowledge they've gained here.

[@exnozgaming5657]

Watch all of his videos, you'll learn a lot

[@chaderosiers]

Great job as usual!

[@salimolive2143]

God bless big boss

[@KaddeMario]

8:10 uh oh capacitor on the loose

[@NorthridgeFix]

That's from the soldering iron tip cleaner, it has has elephants and giraffes in it. It's not from the board.

[@JeSuisUnePatate]

@@NorthridgeFix - You made me laughs once again ! 🤣

[@Caps_Locke]

@@NorthridgeFix I looked, but could not find in your store, any of those Elephants. Are they out of stock? 🐘

[@NorthridgeFix]

NF.Elephants coming soon. Just trying to figure out the shipping method.

[@Karlston]

@@NorthridgeFix Use a Boeing 747 Jumbo Jet? 🤣

[@adi0malka]

Can you recommend or let us know which hot tweezers you use? I’ve been looking for a good one and all I can find is Amazon garbage

[@NorthridgeFix]

We are testing a new amazing hot tweezer station and different kinds of replacement tips. We are very close to carrying the item is stock. I'm working on a video to showcase the product. Wait for it.

[@oscarmartinez8435]

Yes!!!!! Finally lol 😊

[@Alltakenbla]

Ali is a wham bam thankyou Mam guy!

[@user-gc7cj4rz9i]

At 08:25 why is the solder added and removed before adding the chip to the board?

[@gangsternations]

It's old and it's gold again

[@MG-ti5ee]

Maşallah.süpersin. Şipşak Tamir servisi.

[@elvispressedtalot9899]

I tried getting my Samsung tablet. Repaired too. But... before going to repair stations!. I had looked at each individual prices for the screens replacements! And they all exceeded over 189.99 to 225 dollars. And brand new tablet was and is still. 229.99 ! The diss I got! When I was getting told to buy a newer version . Instead of us ordering a new screen. .. still have this tablet. To this.day

[@segicus]

Amazing! Love the content!

[@markfudger5267]

Los Angeles and San Diego get mini earthquakes all the time.

[@gpredd1]

GO BIGBOSS ❤

[@kyzercube]

What's really funny Alex is that you could have just re-watched your old video to find out which shield the chip is under 😆

[@TheFurrry]

can anyone help or advise with desoldering holes. no matter what i do i just can't get the wick to clear the holes, it soaks up all the solder from adding extra on the hole with solder, but always leaves the hole covered. it just refuses to wick up any solder in the hole ive tried flowinglow melt solder into the hole to bring temp down, i use flux and decent quality wick, big tips and small tips, its not just this circuit board it doesnt matter what board i practice on its same result,,,any advise welcome...im ready to give up.i dont think soldering is for me

[@bblod4896]

Nice work Alex.

[@souofelipe]

How much for rewrite the bios with a programmer? My bios brick

[@DoubleDYo]

Do you accept repair requests from your viewers? If so I'd like you to diagnose and repair my ox tab 10

[@nextbizzy]

I'd be worried about stabbing my hand on those pokey metal pieces! Just snip them off.

[@xlwirelesselectronicrepair]

❤

[@rahulmechatronics]

Why IC image is shaking 06:31?

[@furhad]

its an optical illusion

[@thomashenden71]

Figuring out that chip was key to you being more successful and buying that house. Go figure! 😮🙂 Also having to remove that cross, may be the butterfly effect that resulted in you buying that house, 4-5 years later.

[@mrwoodandmrtin]

That is Art.

[@moamgaphonemga6166]

👏👏👏👏

[@yashsoni6154]

why do you don't open an institute

[@CooLDEaFY4204Me]

Better than Factory

[@rodhester2166]

Why dont you have a lava lamp on your desk.. lol... Kidding.

[@Swenser]

I've seen you have spoken on ethical things in the past. Can you please have some words on the tyrannical behaviour of US and England towards freedoms of journalism. Why? Imagine if KZbinrs start getting put in prison for hurting someone's feelings. It's happening now. Free Julian Assange. His trial is on now.

[@northwestrepair]

This thumbnails will make that graph go up 🤣

[@yogidemis8513]

Dudeman is better than MacGyver!

[@mr.hellsy]

Better than factory!

[@toshogme]

something was not right with the "the chip is out" lol....maybe replace the whole board... lol

[@stfnsipos]

Your way of thinking and working are both OK. Let them talk. They can not do batter anyway.

[@King-Merlin]

👏👏👏👏👏👏👍👍👍👍👍👍👍👍👍👏👏👏👏

[@fpk1954]

🥰🥰🥰😎💥💫👍👍👍💫💥😎🥰🥰🥰

[@yummy_blueberry]

Love from Pakistan.

[@therealdrake9289]

i've been making tickets on your website and i haven't been getting responses are you guys really busy right now?

[@NorthridgeFix]

When you create a ticket online, it means you are shipping a device over. No one will respond to you other then that automated email you get when creating a ticket. If you need to get in touch, use the contact us form on your website and Dolly will get back to you within 48 hours. northridgefix.com/contact-us/

[@therealdrake9289]

@@NorthridgeFix thanks! I'll make one right now, also when will we be getting a house tour? 😂