Expensive Zenbook i9 Laptop Dead. What's going on Asus? UX582 Fixed.

  Рет қаралды 93,440

NorthridgeFix

NorthridgeFix

Күн бұрын

Пікірлер
@loubedoo2129
@loubedoo2129 8 ай бұрын
Alex one of the best parts of watching these videos is to see that happy kid smile you get when you fix the problem and the device works.
@mornax
@mornax 8 ай бұрын
The slight rotation may be signal integrity mitigation, in order to avoid the fiber weave effect at high frequencies. This skew is to prevent the routing from aligning with the fiberglass weave pattern in the glass cloth between layers. If you have a trace sitting right over a glass bundle, and the adjacent trace is over the gaps between the bundles, the difference in dielectric constant between the glass and prepreg resin will cause the signals to have different velocities, potentially causing bus timing issues. 10-12 degrees is typical. Usually you just draw your traces in a zigzag pattern, but if there's no room, you have to also rotate the parts, or rotate the entire panel at the factory, but that wastes material.
@tomclanys
@tomclanys 8 ай бұрын
Wow, I learned something new today. Thanks! :)
@asicdathens
@asicdathens 8 ай бұрын
People tend to forget that at these speed rates, digital lines have a lot of RF characteristics that have to be addressed. For example PCIe cards have to be impedance matched to the motherboard (there are standardized values)
@JaaMaar001
@JaaMaar001 7 ай бұрын
The first sentence in your comment explains it all. Very well said.
@popcopone5172
@popcopone5172 3 ай бұрын
@@tomclanys what did you learn bro, i didn t understand one thing ahah
@Jooligan1
@Jooligan1 8 ай бұрын
Alex's smile says it all - a great fix !!!
@catharperfect7036
@catharperfect7036 8 ай бұрын
He got the two bad guys.
@davepost7675
@davepost7675 8 ай бұрын
I was going to make a similar comment. You can tell he really enjoys his work.
@bblod4896
@bblod4896 8 ай бұрын
I see corrosion on the IC near the caps and the caps themselves. A guess before the video is completed.
@tonymontana897
@tonymontana897 8 ай бұрын
I noticed that too. I reckon a spillage occurred and it shorted out.
@Embermist69
@Embermist69 8 ай бұрын
The green crusties destroyed everything. (Sure that is not a proper word most likely. That said picked that term up from an auto repair channel here on the old KZbin.)
@oldbatwit5102
@oldbatwit5102 8 ай бұрын
@@Embermist69 Eric O?
@Embermist69
@Embermist69 8 ай бұрын
@@oldbatwit5102 Yep
@steveblayer342
@steveblayer342 27 күн бұрын
Great work as usual, Obviously it was shorted by a drop of water or the paste on the caps gain moister and get shorted which is obvious of the cap terminals black and green blue color.عمل ممتاز كالعادة ,الواضح ان المعجون على المكثفات اكتسب رطوبة وادى الى احداث شورت بالمسار ذلك الواضح من لون اقطاب المكثفات على البوردة باللون الغامق والاخضر المزرق بسبب المياه,كل التوفيق وتحية لكم من لبنان.
@dineshgunatilake
@dineshgunatilake 8 ай бұрын
Hats off to Alex and Big Boss for saving such a beautiful and expensive device.
@alejandrovazquez3329
@alejandrovazquez3329 8 ай бұрын
It is always a pleasure to watch your videos. Great job Alex!
@semsomify
@semsomify 8 ай бұрын
I bought an Asus Zenbook roughly five years ago, the model number is 430UN. Out of the box it had issues with sleeping and not waking up, continues to have that problem. Two years in, the battery died and there were no original replacement parts. So now I have an ultrabook that was supposed to be high end, $1500 laptop, that cannot sleep and has no battery. Never buying Asus again even if it was the last laptop maker in the world
@Thepluginguy
@Thepluginguy 7 ай бұрын
Thank you! When I buy laptop i will remember ur comment. No asus
@pc-easy
@pc-easy 7 ай бұрын
Sleeping issue can be corrected just with a registry key...you either could set it in s3 or s0 state😅
@automatedrussianbot
@automatedrussianbot 6 ай бұрын
bought a asus gaming laptop about a year ago, only had problems ever since
@Daunlouded
@Daunlouded 6 ай бұрын
To be fair sleeping is a Microsoft issue, not Asus issue. For the battery you can almost always get replacement batteries if you bother to ask from proper shops. It doesn't have to be original part to work.
@martinjjnoagenda5536
@martinjjnoagenda5536 8 ай бұрын
Just imagine how many of these devices are simply thrown away because of some tiny capacitors failing. It's nuts.
@myne00
@myne00 8 ай бұрын
Need automotive grade ICs next. Those bastards tolerate 20 years of harsh conditions no worries.
@fraserthomson5766
@fraserthomson5766 8 ай бұрын
We don't throw them away, we just keep them in a cupboard for 12 years before binning them.
@mjrausch
@mjrausch 3 ай бұрын
@@fraserthomson5766Too real, I’m triggered.
@inc2000glw
@inc2000glw Ай бұрын
Can I use that comment on a future post? U will get the creative creation credit?😊
@Suresh_Pillai
@Suresh_Pillai 8 ай бұрын
Great work Alex as always, quick and to the point. 👍👍That indeed was a weird angled GPU circuit design.. that 10-15 degrees gives some sort of isolation maybe.
@mohammad_smile
@mohammad_smile 8 ай бұрын
كل هالمشاكل من مكثف صغير, الله يعطيك العافية اخ علي
@alantorrance6153
@alantorrance6153 8 ай бұрын
Wow! Working successfully on a "new" PC no less! Great stuff.
@hadibq
@hadibq 8 ай бұрын
Always nice to watch a man doing a great quality job Alex!!😊 Kudos mate!
@xBITTYBOOx
@xBITTYBOOx 8 ай бұрын
Hey brother! Love your videos! I only watch your videos because when you do something it gets done the correct and proper way so I know When I attempt to repair a board or replace a hdmi connector its gonna get right! You have the best repair channel on youtube!
@romanaroun
@romanaroun 8 ай бұрын
This guy is the best that I have ever come across!!!
@ashrafatteya
@ashrafatteya 8 ай бұрын
كل عام وانت بخير وصحة وعافية انت والاهل والاولاد . عمل رائع
@CooLDEaFY4204Me
@CooLDEaFY4204Me 8 ай бұрын
Good job Alex , Big Boss.... Better than Factory 100% Legit Business :)
@mallard6983
@mallard6983 8 ай бұрын
You are a credit to your profession, sir, oddly, enjoyable, following along your little adventure, to find the bad guy
@Elyon113
@Elyon113 8 ай бұрын
I learn an insane amount from watching you work, thank you for the free education
@kpelectronics
@kpelectronics 8 ай бұрын
You got the two most important things broth, tools and knowledge
@outfield1988
@outfield1988 8 ай бұрын
Awesome job Alex.😊
@DonaldAdkins-i4n
@DonaldAdkins-i4n 8 ай бұрын
Great video just like always. Like I said before I started watching your videos and for some reason they inspired me to try and learn this as a hobby, since I'm retired need something to do. I've learned quite a bit I think not just from your video's but I also watch as many different ones as possible. Today I actually replaced a charging port on a samsung galaxy tab e 8.0. for my sons work they have alot of them for the drivers. No problem. I have replaced 3 touch screens for his company I told him your company buys the parts and since I'm just learning I'lldo it for no charge. So far so good. Thanks for your videos and sharing your knowledge......
@NBMSCH
@NBMSCH 8 ай бұрын
one of the caps that you replaced has green corrosion which probably was caused by a liquid damage.
@fitsumgetaneh7791
@fitsumgetaneh7791 8 ай бұрын
Wow i dont have any words to express you alex you are just amazing tnks!
@SzTz100
@SzTz100 8 ай бұрын
I don't know much about electronics, but I find your videos fascinating.
@jacoleroux5569
@jacoleroux5569 8 ай бұрын
I'm not sure but it seams to me like liquid damage. I saw the greenish stuff. Good and quick Find as always. Better than Factory
@TheLastSock
@TheLastSock 8 ай бұрын
Didn't you know Asus have a contract with you. They said they will keep your business supplied for years. 😂
@SolderBrothers
@SolderBrothers 8 ай бұрын
I have a suspicion that we see these failures because of transients and EMF getting through the power supply. Either from the power grid or EMF from local sources. I always recommend a good quality line conditioner for all expensive electronics. Just my opinion.
@ianarbery9601
@ianarbery9601 8 ай бұрын
good job easy when you see the problem. that's good looking laptop with two screens first time i have one
@sunflowers6612
@sunflowers6612 8 ай бұрын
Great fix alex ? congratulation to you and wife ⭐⭐
@intoxicode
@intoxicode 8 ай бұрын
I wonder how many times he'll try powering on a laptop without a heat sink, and wonder why it won't power or stay on 🤣🤣
@JacobLara
@JacobLara 8 ай бұрын
He needs some Big Boss skill
@ranjitmandal1612
@ranjitmandal1612 8 ай бұрын
😂
@OccasusRaven
@OccasusRaven 8 ай бұрын
@intoxicode and that is one of the basic things what everyone should know, if there is not heatsink to transfer heat off, of course its not going to stay on because overheating 🤣🤦‍♂️
@milfordbass
@milfordbass 8 ай бұрын
You guys know so much! Why don't you have a You-Tube channel?
@Big_AlMC
@Big_AlMC 8 ай бұрын
​@@milfordbass To busy actually fixing devices. Dont need to make a youtube channel to know bubba.
@nextbizzy
@nextbizzy 8 ай бұрын
First class work my friend.
@Mike.Kachar
@Mike.Kachar 8 ай бұрын
WOW!! Two new videos, 2 days in a row/back to back! It must be Christmas already 😆 Thank you!!!
@patrickjean5811
@patrickjean5811 8 ай бұрын
Ceramic is brittle, those capacitor are multiple layers of alternate conductor +, conductor - and ceramic, with vibrations the ceramic break and the conductor + and - touch each others creating a short circuit.
@araz1977
@araz1977 7 ай бұрын
Now this is what you call "Better Than Factory" fix... Thank you Alex, marhabaah...
@zaqway
@zaqway 6 ай бұрын
Wonderful work, as always! Although I'm wondering, if this laptop is around a year old, should it not still be under warranty from the manufacturer?
@MMageWarrior
@MMageWarrior 8 ай бұрын
There looks like a corrosion happened to the caps and power line. Metallization on one side of the cap corroded, not burned. The damage very close to the DRMOS and may present underneath, because corrosion may spread below the mask layer. For my opinion, it is necessary to desolder the DRMOS and check the condition. After the repair, a good practice is to check that this particular power line is working like the other "neighbors". Otherwise, next DRMOS may fail under the load later. Anyway, maybe I am wrong. I like your videos - they're never boring.
@jeroeniemans
@jeroeniemans 7 ай бұрын
Your video's soothing me every time
@rodhester2166
@rodhester2166 8 ай бұрын
Thanks for the video, Hope all is well, cheers
@Backstage_Politician
@Backstage_Politician 8 ай бұрын
It's always good to see that smile on Alex's face after successfully saving the customer thousands of dollars.
@aremaka4438
@aremaka4438 5 ай бұрын
Well 🎉done legend. I like watching you fixing and saving people from financial struggle. I am going to start dealing with the thing I hate most. Electronics.😂
@grantjameshill
@grantjameshill 8 ай бұрын
Great video, thanks for uploading! I'm a beginner when it comes to electronics, but want to start getting into it. Could you please explain to me what all the grey stuff is please? And why you didn't remove it? It looks very untidy to me, and I would want to remove it all and make it look neat. Thank you :)
@BigRalphSmith
@BigRalphSmith 8 ай бұрын
What is all that black stuff? Looks like roofing tar.
@Starshooter216
@Starshooter216 8 ай бұрын
Such a mess with the heatsink compound. It's not conductive is it?
@robertmacdonald345
@robertmacdonald345 8 ай бұрын
??? A $2400 and it has Thermal Paste messed over components like that??? Who the heck was working on it before??? I enjoy your channel but I was disappointed that you didn't clean that Thermal paste off everything, How much extra time would it have taken, so your Work area would be clean to help with Diagnostics?
@DavidPennable
@DavidPennable 8 ай бұрын
Awsome work as Always, and that Hoodie is looking Sharp! 👍
@djburland
@djburland 8 ай бұрын
Another fabulous fix
@majorlook
@majorlook 8 ай бұрын
You are simply amazing. Great job
@MrChrisjcb
@MrChrisjcb 8 ай бұрын
Looks like liquid damage?
@dynamisDIY
@dynamisDIY 8 ай бұрын
the strange tilt might have something to do with signal integrity, but thats just a wild guess.
@excdnforces4035
@excdnforces4035 8 ай бұрын
hey when are you going to do the jayztwocents collaboration?
@ronlevin2339
@ronlevin2339 8 ай бұрын
caps looked like suffered from a water damage
@catharperfect7036
@catharperfect7036 8 ай бұрын
Yeah almost like a bit of liquid got trapped under there.
@chihofung6860
@chihofung6860 8 ай бұрын
Agreed. You can see corrosions nearby the caps.
@The411
@The411 8 ай бұрын
Yep, see the green copper salt. The ends are corroded off the capacitors.
@ranjitmandal1612
@ranjitmandal1612 8 ай бұрын
😮
@alexg9727
@alexg9727 8 ай бұрын
the thermal pad probably trapped moisture there
@grilledchickenwrap
@grilledchickenwrap 5 ай бұрын
amazing troubleshooting steps!!! seems these days almost every electronic device fails due to capacitors lol.
@zaharistamenov1740
@zaharistamenov1740 7 ай бұрын
Monsieur Alex,I was wondering how much for example this fix would cost to the customer? Love your videos 📹, I'm probably getting the same amount of satisfaction as you do when it's fixed 😂
@ranjitmandal1612
@ranjitmandal1612 8 ай бұрын
Great work 👏
@Dbides
@Dbides 4 ай бұрын
Where the cMos Battery Place , Please 🙏
@raoul4789
@raoul4789 8 ай бұрын
No problem mon seigneur 😂... du très bon travail !
@DropDii
@DropDii 8 ай бұрын
dust and overheating ?? dust jumps the cap it off loads and ??? am i right ??
@maklogetrich2378
@maklogetrich2378 8 ай бұрын
it was liquid damage
@carlbrown2712
@carlbrown2712 8 ай бұрын
Hi Alex hope all is well just wondering why your videos have slowed down not as many now. Cheers
@nickolailaw9058
@nickolailaw9058 8 ай бұрын
i "liked" whenever he says Yes! we fixed it! with a big smile on his face.
@alikharmandar1727
@alikharmandar1727 8 ай бұрын
Nice work as always. Can someone explain what are those materials that stuck to the capacitor?
@rawcow2496
@rawcow2496 8 ай бұрын
Old thermal paste
@alikharmandar1727
@alikharmandar1727 8 ай бұрын
@@rawcow2496 ty for response.
@SolderBrothers
@SolderBrothers 8 ай бұрын
The voltage injection brings out the fault in the cap.
@andrez3640
@andrez3640 8 ай бұрын
Why do manufacturers not have a cause, effect and repair data base for guys like yourself for them to improve their products.......
@wallysprint
@wallysprint 8 ай бұрын
love the Colgate smile at the end ..
@leandrocruzz
@leandrocruzz Ай бұрын
Im wondering how much more or less was the cost to have this job done?
@ThePred2009
@ThePred2009 8 ай бұрын
always seems to be the caps do they use poor quality caps?
@disdain6085
@disdain6085 8 ай бұрын
Did you notice anything strange with the battery whilst you were in there? I have had this laptop a while now, and somehow ended up at 50k+ cycles of the battery (via windows battery report) in just over a year of use (about 2 years ago now), literally have to keep it plugged in 24/7
@leorickpccenter
@leorickpccenter 5 ай бұрын
I once worked on an HP laptop that has the M.2 slot slanted by about 20° and it was driving me crazy because if you install an SSD, its weird.
@aizen4851
@aizen4851 8 ай бұрын
Hey I'm buying Asus vivobook 16x and just came to your channel and it's full of Asus laps repair so should I buy an Asus lap or any other company's laptop?
@residuevideos
@residuevideos 2 ай бұрын
How much did you charge for this particular client? Thank you.
@MisterMisanthropeEsquire
@MisterMisanthropeEsquire 8 ай бұрын
I have a laptop with a 1TB ssd and a normal hd. The os is on the ssd, but it won't boot. SMART says it's failing. I can luckily read files from the windows 10 installation usb from the CMD. I copied the users folder to the normal hd, I hope. I'm not sure what else I'll need from it, but it's write protected for some reason, and I can't get any tool to do anything with it.
@lallyji8051
@lallyji8051 8 ай бұрын
When can we buy hot tweezers from your shop?
@Hobypyrocom
@Hobypyrocom 8 ай бұрын
dude, where can we get better nitrile gloves? mine tear in mid work just like yours...
@soulstudioshamradio
@soulstudioshamradio 8 ай бұрын
I do believe that's why doctors double glove
@Hobypyrocom
@Hobypyrocom 8 ай бұрын
@@soulstudioshamradio you might be right... i tried that once, but that way you cant feel anything with the fingers...
@kulibo1
@kulibo1 8 ай бұрын
I almost, always watch your videos as soon as it's out.😂😂😂
@kaziashrafulalam20
@kaziashrafulalam20 8 ай бұрын
Well the caps that are blown i have found several of them with that ic name npxxxxx i wander if the ic is to blame
@RITABRATACHAKRABORTY-p8h
@RITABRATACHAKRABORTY-p8h 8 ай бұрын
I have a ASUS ROG Strix G17 2022. The display went black when I connected it to the lan for wifi. Now it works with external display but nvidia drivers cause the even the external display to go black (on windows). Right now I'm using linux with no nvidia display drivers. Could you please suggest a fix?
@robertbartram5632
@robertbartram5632 8 ай бұрын
aanother great solution,,,,,, and i bet the customer will be over the moon,,,,,,,,,,,,,
@janaboy82
@janaboy82 8 ай бұрын
There was no warranty yet?
@maklogetrich2378
@maklogetrich2378 8 ай бұрын
I would ask the same question ASUS give 2 years warranty
@MrChausner
@MrChausner 4 ай бұрын
Great program
@DirtyMikeAndTheBoys74
@DirtyMikeAndTheBoys74 8 ай бұрын
I have been considering getting a 4090. Which brand would you recommend? Asus,gigabyte etc.?
@darrionnelson4784
@darrionnelson4784 8 ай бұрын
what is the liquid you use on the q tips? to clean the board during and after you are finish soldering?
@Timmymao163
@Timmymao163 3 ай бұрын
90% rubbing alcohol or higher. Anything lower leaves traces of residue behind.
@danielturunen7237
@danielturunen7237 8 ай бұрын
Excellent! :)
@tonymontana897
@tonymontana897 8 ай бұрын
Why do these Zenbooks have two screens ?? I've never seen this before.
@Timmymao163
@Timmymao163 3 ай бұрын
The second screen is like a monitor extension. Or it can be used for touchscreen gaming controller.
@gam3kid
@gam3kid 6 ай бұрын
What is the gray stuff on everything?
@WilliamSiansala
@WilliamSiansala 8 ай бұрын
If fail to place or miss out one component,the decive will not power on
@randomized4368
@randomized4368 8 ай бұрын
Can you try one of those 3D thermal cameras with IR and compare it with a regular one?!!
@boettgg1275
@boettgg1275 8 ай бұрын
I have similar Asus laptop. Mine is Duo Pro. Very expensive with touch screens. Had it 18 months and battery went. Asus agent here in South Africa was not intrested to replace battery for free. Had to buy and pay for new and did the install myself
@philippechampouret
@philippechampouret 8 ай бұрын
Hello. Don’t you sell hot tweezers ?
@perkulant4629
@perkulant4629 8 ай бұрын
Always customers coming in with the water damage 😂.
@Jason-zh7wo
@Jason-zh7wo 8 ай бұрын
Great job 😀😀👍👍
@andrez3640
@andrez3640 8 ай бұрын
Ask always fun informative vid... previous comment re you smile"smirk" tells us a whole story...
@croww6318
@croww6318 8 ай бұрын
Hey .. i want to start this job but im so afraid
@c-v-n3322
@c-v-n3322 8 ай бұрын
I'm not surprised this Asus laptop died within 2years as mine as well died 2 years after the warranty expired, I was told it needs a new motherboard.
@garymartin9777
@garymartin9777 8 ай бұрын
I bet a nice dinner that the big caps there are tantalum. It's not uncommon for tantalums to leak and blow up like that. It doesn't matter how much you pay for a system there's a certain percentage of tantalums which are expected to fail. It's just the nature of the beast. With luck it doesn't cause any further damage, maybe a power transistor at most, and you're back in business.
@Beekaert
@Beekaert 8 ай бұрын
Hello Alex. The capacitors as well as the resistors have been chosen by the manufacturer in such a way that they almost always operate at their maximum power. By this I mean, for example, a resistor that normally dissipates 1/2 watt is replaced by the manufacturer with a resistor that can dissipate 1/4 watt. Of course this works, but the resistance is then constantly under severe stress, which reduces the lifespan of the component. This also happens with the capacitors and even with other components. The manufacturer's aim for this is to be able to quickly bring new devices to the market. We live in a throwaway society where only the pursuit of profit counts for the manufacturers. It's a pity that we have to observe this in both Europe and the US. But that's just the reality. Greetings from Belgium. Andy
@Johny666EU
@Johny666EU 7 ай бұрын
when i seen your thermal camera video it remids me Predator movie :)
@MacGamingPlace
@MacGamingPlace 8 ай бұрын
How much would you ask for a repair like this?
@ps5gamepl4ys
@ps5gamepl4ys 8 ай бұрын
It would be good if those small capacitors had an internal fuse and when they break down they would simply trip and the laptop would continue working.
@chibonchibon3967
@chibonchibon3967 8 ай бұрын
This is art ❤
@wallysprint
@wallysprint 8 ай бұрын
what is that grey goo?? :/
NEW ASUS ROG Laptop DEAD No Power Repair- What happened ?
16:27
NorthridgeFix
Рет қаралды 81 М.
Replacing this chip is a Nightmare. iPad 5 Glued Tristar
18:23
NorthridgeFix
Рет қаралды 101 М.
UFC 310 : Рахмонов VS Мачадо Гэрри
05:00
Setanta Sports UFC
Рет қаралды 1,2 МЛН
99.9% IMPOSSIBLE
00:24
STORROR
Рет қаралды 31 МЛН
Expensive Asus Strix G513QY Laptop Repair - Suddenly won't power on.
18:07
The RETURN of the TACO! (SATA's last stand)
14:02
Level 2 Jeff
Рет қаралды 66 М.
Why Millions Of Gamers Are Boycotting Asus
12:20
Logically Answered
Рет қаралды 376 М.
Dead HP Spectre No power - Reballing using Universal Stencil
16:06
NorthridgeFix
Рет қаралды 43 М.
Is Buying a PETABYTE on Ebay Stupid?
18:13
Linus Tech Tips
Рет қаралды 1,6 МЛН
Expensive Laptop Disaster - Liquid Metal Application Gone Wrong
19:40
How much bend can make your graphics card beyond repair ?
53:07
northwestrepair
Рет қаралды 42 М.
Expensive Audi VW VAS6154 Diagnostic Tool Repair
22:00
NorthridgeFix
Рет қаралды 152 М.
4090 FE Not Detected After Installing Water Block - Can It Be Fixed?
20:55
UFC 310 : Рахмонов VS Мачадо Гэрри
05:00
Setanta Sports UFC
Рет қаралды 1,2 МЛН