Samsung top of the line washing machine after 4 years

[@awesomegaming8617]

Washer and dryer set here lasted like two or three years before it started having issues. We had to replace pump once. Then we heard noise coming from dryer, dryer had worn bearings and then finally got them replaced, not even a few months after, we heard noise coming from dryer again, same issues again. It is annoying to say the least.

[@marcviej.5635]

i replaced the pump over 3 times, it's terrible, after researching it says on the pump "10min ON - 1min OFF" probably to prevent overheating but while drying it almost never turned off and if it did it was only for a few seconds, it's purposely programmed to break, planned obsolescence

[@multiskype]

what's the little window for, is it for adding any forgotten items

[@bartexxy]

yes

[@Bordberti]

Lagertausch ist bei Samsung ist sehr einfach und kein Problem. Lager und Wellendichtring kosten 25€ danach läuft die Maschine wieder wie neu. Das Problem ist häufig ungeeignete Reiniger auf essigbasis oder unterlassene Trommelreinigung. Meine 12kg ist Baujahr 2014 und hat bis jetzt kein Lagerschaden. Immer an die Vorschriften gehalten.

[@1911beauty]

I have 5 year old speed queen front loader that i washed a blanket in today. Not one service issue on it or the top loader since 2017.

[@alexmanolopoulos1873]

Me too!!!!

[@AgentSmith911]

Only available in the US. Europeans don't usually buy toploaders.

[@deebee3901]

You are comparing a commercial washer with a domestic washer. Bearing fail prematurely when the washer is over loaded.

[@SuperWoydek]

Why there is an issue call samsung 5 years lparts and labour

[@andersyap5954]

Nothing to be surprised . It’s a samsung ok lol !

[@MisterBrownJack]

Bearings are gone I can tell, at the same time it's probably better to get an LG or a Miele washing machine next since those last alot more longer

[@tasosk5298]

Today’s machines suck!!!! Even Miele!

[@mr.fisherwm]

My past washer/dryer Hotpoint-Ariston 8/6 kg also after 4 year become noise, but it's not bearings, cause it was replaced in 2019.

[@seccat]

But you can DIY service these bearings. The drum isn’t fused together, as they are in LG.

[@rcroberts6700]

Bearings failed in LG too🤦🏼‍♂️

[@FoFo-gm2iv]

Our GE is 27y.o. still working fine 😂

[@deebee3901]

You can change the bearings on all Samsung Washers.

[@ManuelaPaun]

How u opened blue led in it?

[@cal87249]

this is the bereangs destroyed and if the bucket is openable you can fix it with 120 euro about, if is closed you can by all the bucket and drum for 350 euro or trought it out and buy a new one

[@murphyschannel8777]

This is old model (Samsung DirectDrive EcoBubble 10KG Front Load Washing Machine) it gets noisy maybe the frame absorbers broken.

[@huuhoangmanh685]

they do NOT use direct drive motor on their quickdrive models, instead it uses two pulleys, two belts, and two motors

[@ICallTubers93Child]

Is this a Samsung QuickDrive washer?

[@bartexxy]

yes

[@PedrodelBosque]

Makes you wonder how much extra it costs to use a bearing that will last more than a couple of years on a machine with a recommended retail price of 1600€

[@o00scorpion00o]

So much stuff now made in China with poor quality control. The latest machine I bought a couple of months ago is an Indesit, simple, knobs and buttons, all digital inside of course but simple to operate, doesn't have A for energy or A for spin etc and much cheaper and it will probably last as long or longer. Back in the day no one would have spent the money we do today on white goods and I never will again be sucked into that digital marketing nonsense. The old mechanical timer machines of the past did just as good a job it's really the detergents that do most of the work at the end of the day all a washing machine does is move clothes in a drum of water.....

[@ОлегПанков-й3п]

Крутая машинка👍

[@WASHLOVER2006]

​@Y ahh hell no. They said it in shorter, its wrong translate

[@jasimalbuainain8227]

Did you miss something like cloth and sock or suit?

[@Macky4941]

Front loaders are the worst. They're designed to fail so you either spend the money on replacement parts or go out and buy a new one.

[@randomdudeontheinternet9926]

MIL has been ising her AEG for 13 years. I’ve been using my Miele for 5 years and I’ve got kids so it’s spinning daily, sometimes twice. My mother has been using her Miele for +20 years now and I had to replace a thermostat. My grandparents only bought 2 front loaders in their life. Both from Miele. In other words, front loaders are very decent. You can get some bad luck but that goes for everything you can buy.

[@AlemOpancic]

​@@randomdudeontheinternet9926 will front loaders are very good not gonna pay water bills for small loads

[@o00scorpion00o]

The quality of washing machines today has taken a nose dive, they advertise Digital motor and digital inverter as if it's something special because they use the word digital. You just can't beat the old mechanical timer for longevity, it controlled every function in the machine and the motor and it didn't need expensive circuit boards to fail. We've gone through 2 washers in 2 years here in Europe, 1 Bosch, the drum leaked and fried the main board and in the samsung the board fried. So this time I said I'm not paying 500 euros or anything close for a washer ever again because all you're paying for is the fancy screens and look and the marketing nonsense and the energy rating, unfortunately as more and more climate laws start to effect white goods it will only get worse. These circuit boards can be mass produced quickly and much cheaper than the mechanical timers saving a tonne of money because the cost to produce is lower and they can use "digital inverter" as marketing nonsense that most people fall for. It's the same in modern cars with touch screens, all menus for basic functions as manufacturers save a tone on proper switches and cabling. This new indisit I got and waiting to be delivered was the cheapest 9 kg machine I could find around 360 Euro's, it's got 3 knobs, program, spin and temp, very simple, never spending a penny more again but the cost will get higher as more strict environmental regulations come into play. Next stage in washing machine is full colour touch screens which will make you watch adds before you can turn on a wash. Don't fall for the marketing nonsense, just buy the cheapest machine you can get.

[@iloveaviation32]

Old wahsers have longer longevity but their also noisy and their not water efficient bc of this you will just increase the price of your water bill and bcuz theyre used they will break fast

[@o00scorpion00o]

@@iloveaviation32 I will take higher water consumption, electricity and more noise for longevity. Pay more for electricity, I can install solar PV, more water ? not a problem, even for those on metered water the savings from buying expensive new machines every few years is wiped out vs an older machine that's much more reliable. I have a Well for water, not exactly free as water has to be pumped but electronics made them cheaper and the manufacturers are able to market this as "digital inverter" digital motor" etc, so they can increase the price while making the washers cheap. They add WiFI etc, all nonsense. Bubble Soak ? lol we don't need any of those things, the mechanical timer took care of everything and usually lasted several years.

[@iloveaviation32]

@o00scorpion00o your right we had an samsung washer which had mechanical timer it was noisy but lasted for almost 10 years until we had to replace the washer because it won't fit our clothes anymore then we upgraded to an lg dd motor 9kg it's amazingly silent but I hope it will last 10 years like the samsung

[@o00scorpion00o]

@@iloveaviation32 Hopefully you'll be lucky. I just feel all this digitisation of our lives in every aspect is unnecessary. Next thing you know we'll have to watch adds and click "I accept" before every wash !

[@washerstuff]

our lg from 16 years ago used to work almost perfectly but last year it started making weird noises when spinning so we got a samsung which is way louder than the lg even though its 4 months old

[@ZachemPsevdonim777]

Price of this washing machine?

[@milanzerewan7332]

2000 dollars which is very much money

[@rowenaraquelcapacite3764]

What washing machine model is that, does it really have a light inside the drum or tub?

[@ICallTubers93Child]

Samsung AddWash 10.0kg EcoBubble digital inverter washing machine to see.

[@42luke93]

Ours shakes violently. Tried changing the shocks and it didn’t work so we got a new one.

[@belizekaviar1263]

trommelkruis is gebroken.., aluminium corrosie door te hoge/lage ph waarde van water en wasmiddel wasverzachter.. ph 7 beste

[@charliebelle6693]

Samsung sucks and they don't honor their warranty. The back of the drum is attached to the motor with a brittle type of metal that eventually breaks with the high RPM and rotates out of balance. This piece is suppose to be warrantied for 5 years instead of 3 as part of the motor.

[@JDMz]

The motor is warrantied for 20yrs lol

[@SaraSarabaku-en6ex]

Why does it make noise

[@Jahangir_Hossain_CA]

This is a 2nd top of the line

[@PedrodelBosque]

if you say so :-)

[@shillpolice7981]

Yep thats the spider arm that mounts to the rear of the drum one of the three legs of it is broken. You can trash that washer if you are not real handy. And still the part may be overpriced. I thought about having my Kenmore welded when it broke after 15 years, but it would probably leave it unbalanced and that dont work at 1100RPM.. .

[@shillpolice7981]

@DARK KATACLYSM well the particular washer I had was a Kenmore side barrel from 2003 and it had a really nice stainless barrel. The spider gear is on the back of it outside and away from any fluid perhaps one of us is confused or talking about something else. But on any washer I would think there would have to basically be a leak that could go to floor to get that part wet. Its basically the mounting bracket for the washing barrel??? I did later think I should have taken a chance getting it welded. Seems like it looked like pretty raw high iron content metal. But I decided not to try it since the barrel spun up something like 1100RPM and I did not think it would ever get balanced right with a weld on it.. Never know though perhaps it it were ground back down to spec post welding then maybe. I see the vid again so imagine that behind that was tub on the back side of it there is a tri-pronged "spider arm" that mounts in 3 places on the perimeter of the rear of that sideways barrel. There is no way water is getting to it that is a flawed suit if what they say. What happens is the damn washers spin so fast that any inperfection in the balance of the weight distribution of spider arm causes one of the arms to break. Then you have the washed that is spinning out of round.

[@jawaroogambian]

Wow. Sounds like rocks being washed. Did you get the extended warranty?

[@PedrodelBosque]

I did :-)

[@УстановщикЛинукс]

I used to have an indesit with 5kg, it was good, but then it broke, they didn’t want to fix it, so they just sold it, it lived for 11 years. I using new beko.

[@RoryEwanTan-gv3jx]

BEKO is European quality

[@blu_subwoofer6714]

I want this machine!! What’s the model?

[@StefanSmasnug3831]

it's Samsung.

[@blu_subwoofer6714]

@@StefanSmasnug3831 no. Like for example wfxxxx or wwxxxx

[@blu_subwoofer6714]

I meant what model NUMBER is this washing machine?

[@wojtus1997]

whats happend?

[@ICallTubers93Child]

Samsung AddWash here!

[@ICallTubers93Child]

Not yours! Do not buy!

[@baltukur3368]

Will never buy on they are new to the washing machine industry they don't have experience like the older brands

[@FlyYouFools88]

LG washing machines are far superior.

[@JDMz]

Pmsl

[@washing_lover_2024]

I love this machine.

[@mature_washerDay]

Super video 😂🐱

[@PedrodelBosque]

🤣

[@guitarsrcool4922]

Samsung, LG and Maytag are the worst brands.

[@ondraeles]

LG the worst?😐 We have LG about 7 years. We just replaced drain pump once and that's all. We love our machine

[@josericardogs1435]

My LG is almost 10 years old and it rocks

[@johancarloacero4461]

"VRT Technology" No shit

[@Bordberti]

VRT ist eine sehr gut funktionierender Sensor, der aktiv die Maschine vor Schäden beim Schleudern schützt.

[@vuelee5313]

Samsung washers are trash. Completely trash. I have one. Piece of junk.

[@vuelee5313]

@@jegl31 I been studying disease since 2019. Everyone needs a working washer and dryer. It's why the CDC sell the American people all sorts of cream things that may not really work... For that or those symptoms.

[@vuelee5313]

@@jegl31 long story. I studied morgellons disease. And for some reason almost all of my KZbin commercials is about itching and rash medicine. And it's best not to dig any deeper.

[@pamelahomeyer748]

I never had a problem with mine sounds like you have Snickers in there. Call a repairman and try to learn how to handle life because things break down usually because stupid people do things wrong with the machine

[@PedrodelBosque]

hello thank you for chiming in, Samsung came and replaced the tub and bearing. The repairman said it happens all the time. My point being why not use a better bearing in the first place.

[@umberto3349]

Bearing broken

[@verbodendragon]

Samsung appliances are garbage if you want a good washer and dryer get a speed queen or a huebsch

[@hitmansatya8483]

These machines sucks I have LG washing machine and, it vibrates the whole house at 800Rpm and in 1400rpm🤣

[@JMGilberto]

Samsung is trash. I have yet to find a product of theirs that doesn't completely suck.

[@drew2364]

The vaccums are meant to suck suck lol

[@rosannaortizgarcia5222]

Los celulares para mi son un éxito. ❤❤❤

[@audionut9974]

It's old what to you expect

[@i.q_music]

Yikez

[@Laundrylad7700]

Mine is Broken 😢😢😢

[@raeesakhan1792]

It's so funny

[@PedrodelBosque]

You have a interesting sense of humor 🤣

[@nadolandnada23]

That Sound Pretty Bad!

[@sultanamhi]

Wash all time samsung eco bubbel ⏲📡🌡🌬⏱🛰✔♻️ kelas 99 germs 🎉🧺

[@nicolaechirila1194]

I have one, it just stoped working after 3.5 years... Should i call so. Eone to fix it??