This seems to be a very common fault with this washer. No Display and only make the power up / power off chime. Easy fix and the parts are under £2 ebay part: www.ebay.co.uk...
Пікірлер: 52
@xbananax1239 ай бұрын
Thank you so much!! We fixed our washing machine thanks to you 😄😄
@thomasmuesch6078 Жыл бұрын
Thank you! With the help of your Video, I have just brought my machine back to life.
@deanhutchinson3848 Жыл бұрын
Great to hear!
@alincomnoiu389611 ай бұрын
Hi Dean, thanks for your video, it looks like it helped lots of people and I am about to be one of them. I am a bit stuck though at pulling out the board out of the plastic case, I've been scratched away all the resin around the board, it still doesn't come apart, not even a bit. Any tips please, is any other screws or something that holds it together except the epoxy resin? Any advise with that , much appreciated. Kind regards!
@HiddenTreasuresEnt2 жыл бұрын
LG and Samsung are the worst brands to use for appliances. Samsung makes awesome phones but they make horrible appliances I do appliance repair, Samsung and LG make the bulk of my repairs
@rubysy25318 ай бұрын
Thanks for video, my Samsung washing machine had problems yeasterday. There was power cut with Scottish power yesterday. The machine came up with UC, I turn it off but when I try to turn back on no display just a couple clicks and nothing
@jaketaylor240819917 ай бұрын
Any luck mines the same?
@rubysy25317 ай бұрын
@@jaketaylor24081991 no luck
@Chris-nm6xz10 ай бұрын
Coukd you advise how to desolder and solder the new part? Perhaps a video? I’m hoping to bring my machine back to life but have no electrical knowledge. Many thanks
@BořekHrouda Жыл бұрын
I have a problem with 4C, you wrote that it is not a big problem to bridge them and send the details. I am asking for a solution. Thank you Borek
@megankosten31624 күн бұрын
Hi! Does anyone had an updated link? I do not know which part I need to order..Thanks!
@neals6940 Жыл бұрын
This is the best video on the internet for the eco bubble! Is it safe to bend the pins on the relay to force contact? Thankyou very much for the video
@deanhutchinson3848 Жыл бұрын
much better to replace the relay but it may get you working short term
@neals6940 Жыл бұрын
@@deanhutchinson3848 Thankyou for reply, I did manage to get it working by forcing contact, however don’t really want to leave it like this, so have ordered a new control panel. Out of curiosity was is simple to desolder and fit a new relay? Was thinking to keep this one as a spare.
@deanhutchinson3848 Жыл бұрын
@@neals6940 once you dig out the resin it's faily easy to remove the relay with solder wick or a desoldering pump . I would give it a go what have you got to lose ?
@neals6940 Жыл бұрын
@@deanhutchinson3848 very true, nothing to lose 👍🏼 Thankyou again
@mattylee91892 жыл бұрын
Hi I've got the newer one to that .when I turn it on it makes the noise ext but no lights no LCD. Nothing on at all you maybe same problem
@kpwlek3 жыл бұрын
mine just broke like that. thx for the info.
@manhattanappliancellc57888 ай бұрын
Good Job thanks
@edwardengland75593 жыл бұрын
If you buy the new part can you just replace whats is there or do you have to cut it out and re-solder? mine has just had exactly the same issue you mention. Great video
@deanhutchinson38483 жыл бұрын
you do have to de-solder the old one and replace it... the hardest part is removing the pcb from all the resin. Be carful and only use something plastic due to some very thin tracks that run very close to the edge of the pcb. Also make sure you have unplug it !!!
@nathanjackson91862 жыл бұрын
Hi I have just bought this washer second hand said it was fully working but there's no lights or display just making the noise so I watched your video how do you get the board out of the plastic casing please am demented been scratching round the edges for 2 day and still won't come out any help will be highly appreciated thank u
@medicchester2 жыл бұрын
Wouldn't the new board come with new relays? Or were the both boards relays bad?
@robhale25102 жыл бұрын
Hi, could you give me a link on where to buy this relay, Many thanks Rob.
@erichart41852 жыл бұрын
Good video dean .but how do you order a relay switch for a Samsung washer echo bubble tried on eBay can’t get one. Same problem no power .thanks a lot Eric
@joanmonaghan61852 жыл бұрын
What is the 3e fault please I've checked all water supply water filter thanks
@formomanddad13 жыл бұрын
My samsung front load throws code 4e. All mechanical parts properly working. Changed pressure switch and water inlet valves. Still 4e. The washer keeps filling, then the 4e code comes on. Something is not sensing when the washer has adequate water level and keeps filling
@deanhutchinson38483 жыл бұрын
I think error code 4e and 4c are related to the water inlet system. sometime the little filter get's blocked up in the feed pipe maybe worth looking at. I did have the same fault once i repaired the pcb and a track running around the very edge of the pcb had been cut which i managed to repair.
@mahdishaari98173 жыл бұрын
Pls what a 3C code mean and how to go about it. Thanks looking forward to hearing from you
@kumarak47303 жыл бұрын
Check motor
@jolenecharlton63403 жыл бұрын
Mine too - Team Know How sent an engineer out and the part he fitted broke the display. Still broken -_-
@ianparsons12572 жыл бұрын
The link you advised is Chinese supplier. Do you know of uk supplier please.
@srenb17342 жыл бұрын
Hi, Mine just died and hit the main residual current relay. Now there is no life in the display. There is power after the noise filter at the entrance. The door cannot open. The machine makes a faint click sound approx. every other second, like a relay being pulled over and over again - without effect. Does this sound like the same problem you had?
@jaketaylor240819917 ай бұрын
This is exactly what mines doing? Did you have any luck?
@samirapajic32863 жыл бұрын
Hi what was the parts called you ordered off of ebay please
@Mark_Deakin3 жыл бұрын
Thanks
@charlinebrain59853 жыл бұрын
Hi i have the samsung ecobubble digital inverter washing machine mod WW90J6610CX the drum dont move any help thanks
@Mark_Deakin3 жыл бұрын
@@charlinebrain5985 mine had broken wires at the motor,make sure you unplug mains first. Take off back panel,is your motor mounted bottom middle?check wiring open the wrapping around the wires mine were clearly severed.
@tjsingh9238 Жыл бұрын
Hello do you have a contact number I can speak to you on? Ref the washing machine issue…. Many thanks
@mabfreight84023 жыл бұрын
hello, mine stops at 32 min, and it can't start the spinning, i unplag it, let it 10 min off, plug it and it take the program from where it stopt or sometimes when i plug it again it starts a new program.
@kaviankinglocke85963 жыл бұрын
Mine do the same thing did u fix urs and what did u do to fix it
@mabfreight84023 жыл бұрын
@@kaviankinglocke8596 Hello, the problem was the motherboard. I paid 150 eur for it at the samsung service and i replaced my self.