Sandertainer

[@duanehurley2105]

You blow my mind. Your imagination runs wild with amazing ideas. Keep them coming my friend.

[@mirockswoodshop]

Thanx Duane!

[@tehdoor]

Для порядка прокомментирую в двух языках;) Шикарно! Понравилась идея с ящикам, и переноски в нем всего содержимого - это большой плюс. Надо бы еще предусмотреть отверстие снизу, для быстрой замены шлифовальной ленты Awesome! I liked the idea of a box and carry it all the contents - it is a big plus. It would be necessary to provide another hole from the bottom, for quick change of sanding belt

[@mirockswoodshop]

I almost never change numbers of belts. use just 100 on this machine. if need to change belts often possible to fix beltsander contraversely like you do. i fix it in this position because in this case belt closer to platform. the platform is flat and we can fix any beltsander any way any side. Thank you Alex for your machine. I took basic idea from yours machine - kzbin.info/www/bejne/f6Gkd2l_ppeUfNk

[@mirockswoodshop]

I add your link in description - kzbin.info/www/bejne/f6Gkd2l_ppeUfNk

[@tehdoor]

+mirock's woodshop But if suddenly) it is possible to apply this method in this design s-media-cache-ak0.pinimg.com/564x/e2/16/76/e2167661e6933a8319520a638edb05ac.jpg

[@mirockswoodshop]

+TehDoor hmm... need to look is there enough place... thank you

[@tjbrison]

Really inventive, creative stuff. Your videos are inspirational, by solving complex woodworking problems and showing how to bring your ideas to life in the workshop. Genius.

[@jameshumberstone6156]

I also like to adapt tools but this is brilliant!! Mr Mirock your a genius!! Love your videos!!

[@cameronmcarthur9951]

Mind blowing! Truly a well designed project as were your other projects. A joy to watch.

[@mirockswoodshop]

My pleasure!

[@cardinal626]

надо еще для горизонтального расположения ленты сделать калибровальную приблуду ;) хотя можно и для вертикального на столик .... полет фантазии. Спасибо за видео.

[@breakinn403]

Welcome back and with another great project! Well done it has all the features of a stationary belt sander with the advantage of being portable for the jobsite. An added bonus is it was made from scraps but you wouldn't know it. I can't criticize it because although it takes a few minutes to set up, when you need it, you've got it. I like the fact that you can set any angle needed for the job at hand. Lid removal method is also a good idea also. I did notice the belt is running against the open seam. Some belt mfg. suggest they run closed end in direction of travel and have arrows to show direction. Just an observation. Looking forward to your next project.

[@mirockswoodshop]

really I use it only for 90° almost always. but it was taking place on my rough work table and now I've made separate and movable.

[@ericrickert3045]

A fabulous piece of engineering!

[@Mongrel85]

Very clever, inspired idea - cheers from Australia!

[@mirockswoodshop]

Australia is a awesome country. Thank you!

[@markjarman7819]

There’s a lot of people could learn a lot from you. Very very clever indeed 😊

[@kookyflukes9749]

thank you for sharing your imagination. big fan of your channel.

[@mirockswoodshop]

Welcome!

[@warrensmith2902]

Most Excellent. I'm gonna have to look at this one multiple time to figure out the tooltainer, and how to make it work for me.

[@chiebert290]

this whole series is mind blowing!

[@j.stribling2565]

"What is it? - I don't know..." Heheh. Very droll. Excellent work! That Makita really is the machine to own.

[@antoniydiy6406]

Красота!!! и практичность :)

[@horstkern4810]

Wow, very nice idea and realization.

[@mirockswoodshop]

+Horst Kern Thanks!

[@georgebliss7674]

I love it. Great video and excellent fabrication.

[@Alexkikboxer]

всё супер. классно молодец.всех благ.здоровья.

[@aleksandrdeshkovetsdeshkov8605]

Шикарно! и талантливо!

[@donfillenworth1721]

Really nice design. Thanks for sharing.

[@georgescervantes1834]

Fantastique!!!! C'est à s'y méprendre, tant le travail est parfait!! Bravo! Cependant, vous avez omis, volontairement, je suppose, le système d'accroche des anciennes boites, qui sont toujours présents sur les nouvelles boites. Rien d'autre à redire, sinon une nouvelle fois BRAVO!!

[@mirockswoodshop]

Et pourquoi devraient-ils? Il est plus facile. Je ne veux pas compliquer inutilement les choses.

[@АндрійКовальський-б8д]

C'est très très bien mirock, bon courage pour vous. A bientôt.

[@thesedoy7]

Very nice you got a golden hands Thank you for sharing

[@mirockswoodshop]

Welcome!

[@igortecton2379]

Volodya because you have to speed up the study of the English language. :) A very useful tool . Thank you very much. Glory to the heroes !

[@LostWhits]

I was wondering if you ever refined the details on this machine. to make it quicker to set up. Or not have to remove the sander to pack it away. maybe have the table slide under in a drawer like your sortainer.

[@Юрийнабока-ъ5б]

Отличная работа, я вижу ты на выезд капитально подготовился.

[@adrianjennings8738]

Man your attention to detail is inspiring, I wish I had the time, by the way the Makita 100mm belt sander is the best one ever made.

[@SuperMirock]

Makita works well)

[@hadcohn]

Super nice! Well done

[@AndreyMorozoff]

Владимир, шикарная идея! Только я не понял, почему весь станочек нужно разбирать каждый раз. Штатное крепление шлифмашины есть, а рабочие столики можно расположить на крышке систейнера, которую ты не используешь :-) Конечно она увеличится в толщину, но у тебя же есть запас под шлифмашиной.

[@AndreyMorozoff]

Крышка откидывается на 180 и стопорится или закрепляется барашками, ну а далее полет фантазии.

[@vitalypaley8441]

Блин, можно у Вас "стыбзить" идею?:-) Шутка.....Очень здорово, давно горю идеей организовать хранилище для своего инструмента....Своими руками сделать "Гараж" для своего любимого инструмента, по моему это круто!!!

[@mirockswoodshop]

Буду только рад

[@luctomma1522]

Great work imagination on how to ameliorate a system, keep up the good work.

[@jarektatol6495]

Awsome BOX 😀 thanx 4 sharing

[@mickwilton7750]

Brilliant work well done Mick

[@mirockswoodshop]

Thank you!

[@michaelmakarevich601]

Wow!!

[@YurkJ]

+Michael Makarevich Woodworker lvl120!!!

[@foleycomposer]

Really well done and excellently thought out. How many of the smaller bits can be left together during storage in order to make setup quicker?

[@mirockswoodshop]

I think half of them)

[@andrewmakhnyr656]

Владимир,посоветуйте,пожалуйста.Если бы вы сейчас выбирали между Makita 9403 или 9404,то какой был бы выбор и почему?

[@mirockswoodshop]

Эту бы взял свою. Мощнее. Обороты у меня на максимуме всегда. Была бы какая 2 квт то ее бы взял. Мощности мало мне. Но это мои расклады твердых пород. Это индивидуально.

[@andrewmakhnyr656]

Владимир,а насколько нужна регулировка оборотов для мягких пород,например сосны? Или вполне можно приспособится к работе с сосной этой моделью?

[@mirockswoodshop]

Мне вообще не нужна, я всегда на максимуме шкребу

[@SamJones1956]

an excellent idea!! Thanks for this video!!!

[@Sascha_1977]

Incredibel! Unglaublich!

[@markhedquist9597]

Man, oh man. That is just ingenious. I love it! I want to build one that is an oscillating spindle sander. I wonder if you have already done that???

[@drewpluck8701]

I wish i had the time and patience u have u workman ship is all some

[@glowell]

Amazing skills!

[@rogersbros]

Genius. Well done. 🤘

[@MacTech007]

Most Excellent! I just sub'd to your channel. Looks like you used 9mm Baltic / Russian Birch Plywood. Is that correct? Or did you use 12mm ply? Cheers from Ontario Canada.

[@mirockswoodshop]

Yes, it is birch plywood which called "baltic" in USA and Canada. 10mm. It is pretty heavy and I want to try thinner next time. Cheers for Ontario!)

[@ksp1278]

Very well designed, and impressive construction. Looks like it's a bit of effort to set it up though. I think I'd prefer a bigger box and allow some of those pieces to be packed without having to take them apart. I've learned that if it's too much effort to get or set up a tool, then I will be less inclined to use it.

[@mirockswoodshop]

I agree with you, I needed to contain it in festool standard box.

[@Playemore]

Do you have a plan?

[@chrisharmon6467]

brilliant idea!

[@jeffjones5257]

Pretty slick.

[@leonelectrical]

brilliant. nice work

[@eron17]

awesome crazy stuff, love it!

[@Rottwiler44]

Ay maybe Festtool should give a job for R&D, you've come up with some pretty near storage solutions.

[@mirockswoodshop]

They are not in a hurry).

[@vintz6847]

Very good job 👍🏻

[@nachtdiertje1972]

Another great project. Only a lot of lose parts, I think.

[@gomboslaszlo375]

Mirock for president!

[@himonides]

absolutely amazing!

[@ibrafog157]

wonderful

[@BesPoroka]

Класс! В Германию, поработать на Festool еще не пригласили?... Учите немецкий ;)

[@MichaelWoodrum]

you should really start selling plans. your stuff is awesome and brilliant!

[@rvakkers]

I'm also waiting for plans on all your work. Started watching you on my holiday and looking forward to watch all your projects. greetings from Holland and keep on making more

[@weissbornjr]

I just knew you were going to pull out a rabbit followed by a scantily-clad woman popping out! 8-)

[@DO2VI]

very nice job

[@gegehus6268]

ce mec a de l'or au bout de ses doigts……….génial!!!!

[@LabFiona]

You are the best!!!

[@Divemaster941557]

You are Perfekt Nice Ideas

[@kovka159]

Здорово ....спасибо !! ,;)

[@stormx6667]

fantastic!

[@mule666]

You still are the master

[@Noddi1964]

Wow! Excellent

[@keithmiller6583]

Amazing!

[@mirockswoodshop]

Thank you Keith

[@rolfburgam4098]

Absolut Genial 👌

[@mirockswoodshop]

not really) thanks!

[@gjdewald]

Awesomeness

[@djvitornunes]

great and unique.

[@SautukaS]

excellent solution

[@mirockswoodshop]

+Remigijus Bertašius Glad to be useful)

[@kmonnier]

Freaking awesome!

[@aintgonnahappen]

Ahhh man, awesome!

[@speedypidz9731]

Realy genius !!!

[@jeanaimarre8068]

amazing

[@domenicofiumarelli8977]

AMAZING! 💪 🔝

[@Curmudgeonhero]

Simply amazing!!!

[@LACraftsmen]

Too bad you weren't able to leave the belt sander connected to its base with the threaded rods in order to cut down on one less step for setup.

[@tonymarks3950]

Brilliant !!!!!!!

[@mirockswoodshop]

Thank you, Tony!

[@genaldocaspaarteseferramen9825]

e eu que achei que era so no brasil que a gente se virava nos 30,show

[@ivannazar]

!!! Cool !!!

[@tinosenf6937]

Why do not do it yourself? I also have some Ideas. Let´s say a tuning company, just as they are car tuners!?! With best regards from Nuremburg Germany

[@mirockswoodshop]

Maybe sometimes Tino. Cheers!

[@KaitoFermon]

Perfeito!

[@alexmalinovskyi7037]

Nice

[@classic287]

WOW....

[@angelo-fabianoforni8025]

hello from germany !!!you are fucking awesome!!! i wish... good luck for next time

[@mirockswoodshop]

Vellen Dank!)

[@angelo-fabianoforni8025]

:) You speak a little bit german? I know what You mean with "vellen" but correckt is "vielen" so: vielen dank. Where are you from? I See a lot of your builds . But at this time i havent heard that. I See a flag in your Workshop but my brain say nothing :') Good evening sir

[@mirockswoodshop]

I am from Ukraine. Unfortunately don't speak german

[@6442353]

👍👍👍

[@martijnfransen9933]

nice!

[@animaloverload7465]

Take my money

[@kvadrowood]

Мухи заважають

[@SuperMirock]

дзижчать падлюки бо скоро літо

[@МелитопольскаяВесьРассении]

Офигеть!

[@KaitoFermon]

Tem como disponibilizar o projeto em escala por email? Se sim, meu email é [e-mail] Muito obrigado!

[@mirockswoodshop]

Soory I don't have this model

[@joeframer9642]

Just buy a sanding station,it works better,it’s faster and less work...this is ridiculous

[@ibrafog157]

wonderful