Santisima Trinidad - part 61 Placing Masts, Pins & First Ropes

In this video i place all the masts in the ship. Also i place all the pins and i start the rigging. The transformation begins and it will end up with a beautiful ship! This Video comes in 1080p.
Check out my personal recommendations from Modelers Central :
Check out my personal recommendations from Modelers Central :
For Beginners
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
Advanced
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
Expert
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
Tools
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
As an Amazon Associate I earn from qualifying purchases. Affiliate links for tools :
Step Looper Pliers Create Eye Pins amzn.to/3KQyCCk
Big cutter amzn.to/3wzuyiF
Scalpel with tips amzn.to/3PwTlvb
Wire cutter amzn.to/3LzsXxu
Cyanoacrylic glue with tips amzn.to/3PwV83t
Hand drill with tips amzn.to/3agcoK7
Power drill amzn.to/3PszsFw
Drill tips from Cobalt amzn.to/3MF1oEy
Sandpaper 60 degrees amzn.to/39DA0bg
Small Saw amzn.to/3NpZRSD
Soldering iron amzn.to/3lu6jMj
Small bowl amzn.to/3NoJSEk
Wood putty pine amzn.to/3MDrGH3
Colored paints set amzn.to/3LyLha7
Wood sealer amzn.to/3lybGdI
Nitro thinner amzn.to/3yMX7e5
Paint thinner amzn.to/3ag57dl
Gloss varnish for yachts amzn.to/3wy62hK
Pins amzn.to/3G3Yt5K
Springs set amzn.to/3NxPJHH
Pencils amzn.to/3wvkqrc
Small flat screwdriver amzn.to/3yPPkfr
Flat Pliers amzn.to/38I6q47
Small hammer amzn.to/3sNLsrF
Needle threaders amzn.to/3yVTaUx
Diamond files set amzn.to/3Luy029
Protection gloves amzn.to/3agcGAH
Ruler amzn.to/3sP5kKU
Blower amzn.to/3LxQ8Ir
Dremel pack amzn.to/3sNzFts
Cleaning brushes amzn.to/3NjfKu6
Paint brushes amzn.to/3wCWotf

[@AthanasiosAth]

Every time the ship and your work look very very beautiful!!! Bravo John! Carry on like this!!!😊

[@JohnsWoodenShips]

Thank you very much Thanasis!!!

[@caykaburya]

Hi John! Your model is getting better every day!

[@JohnsWoodenShips]

Thank you my friend!!! It starts to look pretty!

[@hans8608]

A lot of actions finally become clear thanks to your videos.THANKS John.

[@JohnsWoodenShips]

Thank you very much Hans!!!

[@jamesberry4662]

Thank you for sharing your expertise. I have learnt so much just by watching you. I cannot believe how quick you produce these models.

[@JohnsWoodenShips]

Thank you very much James!!! It's been over 7 months now, it is not very quick :)

[@cjstein2000]

Looking fantastic John

[@JohnsWoodenShips]

Thank you very much Jim!!!

[@4englishlies875]

John now the real fun starts,this is the best part of wooden boats in my opinion. You are making it look easy. Which we know it is not. Keep up the good work. Funny how I did not get a notice about this one ran into it by going through my feeds. Hmm YT is messing up again. Great video any how thanks .

[@JohnsWoodenShips]

Yes my friend, now is the hard part. A lot of people believes that the hard part is the making of the hull. It is hard but the hardest part is the masts, yards and rigging. Until i finish the Santisima, have in mind that i make public a video every Wednesday and every Saturday :)

[@diyhometheaterguy]

Great videos! Wish they were a bit closer on the process, but I love how detailed they are. Great help!

[@JohnsWoodenShips]

Thank you very much!!! It's very hard to get close ups when you are passing ropes. You need someone to hold the camera :)

[@diyhometheaterguy]

@@JohnsWoodenShips totally understand and appreciate all the hard work you do for your videos! I am working on a black pearl model now and have to say that your videos are very helpful!

[@JohnsWoodenShips]

@@diyhometheaterguy Thank you again for your kind words!!! I am glad that i am able to help :)

[@robertsalanon2909]

Superbe Montage ,c·est captivant ...Bravo

[@JohnsWoodenShips]

Thank you very much Robert!!! Have you watched the entire series from the 1st video?

[@pierrelefebvre6280]

About the light brown twine, there is a way to make it look better when finished then twisting a few times around the main ropes. The trick is to make some tubes with it using finished naiks as gauges, glue and slip out. You have a finished product that you just slip on the ropes. Change the size by using different size of nail. Looks very clean.

[@JohnsWoodenShips]

Do you have some pictures or a video to watch the procedure?

[@pierrelefebvre6280]

@@JohnsWoodenShips Sorry I don't. Lost my pictures. But its straight forward: A greased (vaseline) nail (different size for different size results) supported in something stable, twine twisted around slightly tight, glue to wet it all around, let seize, pull out before it sticks to nail, let dry. You have a tube. Tube must be twice size of rope so rope and end of rope fit inside. Harden end of rope with glue to make like needle (longer than tube). Insert rope in tube before fixing anything on rope, Use rope as usual sliding tube aproximately where wanted. After tying rope around piece, insert loose end inside tube with lead rope, pull tight, glue, voilà ! Can cut tube any lenght wanted for effect. I use it everywhere there is a lead rope tied to anything. Try it, you'll like it. Its gorgious. Cleans every rigging up. Not many use it. Would go well with your ship building :) Only one shipbuilder used it and he died, my senseï. His site is now closed. Now his teaching will live on.

[@Georgeolddrones]

Its looking good thanks John 👍🐕🐕

[@JohnsWoodenShips]

Thank you very much George!!!

[@alfredopalaciosferrer7606]

Bravo mister John

[@JohnsWoodenShips]

Thank you very much Alfredo!!!

[@jeffersonserino5506]

Great toy I want dat toy

[@GregWilson635]

awesome instructional video as usual John. Just wondering, the CA glue you use , does it come with that long applicator or do you buy them separate. I've been looking for that glue but cant find it. Thanks

[@JohnsWoodenShips]

Thank you Greg!!! They come separately. Here is the glue : www.super-hobby.com/products/KLEJ-CYJANOAKRYLOWY-CA-RZADKI-20g.html and here the little hoses : www.super-hobby.com/products/Dozownik-do-klejow-CA-PVA-UV-10szt..html

[@GregWilson635]

@@JohnsWoodenShips thanks very much :)

[@user-lu5cz5jn7n]

У Русских есть такая поговрка: Дело Мастера боится! Лайк за мастера с меня!

[@JohnsWoodenShips]

Thank you very much!!!

[@chopstyx1]

I know you're building the Montanes right now and have the Beagle ready to build after that. Do you get impatient and want to hurry and finish the one you're working on to get on to the other one as quick as possible? I wonder how possible it would be to work on two at the same time. For instance while waiting for the white glue to dry you could work on the other. But I suppose you have a job too so that would take too much time.

[@JohnsWoodenShips]

No i am not impatient, this kind of model work needs a lot of patience. If you are impatient then you will make mistakes that you won't be able to fix. And you should not work 2 models at the same time, you will mix everything up and like you said i have a day job so the time is limited.

[@cjstein2000]

I noticed that the standing rigging lines are a bit furry, I use one of two methods to fix this, one run the lines though some beeswax, the other is to pass the line quickly over a flame.

[@JohnsWoodenShips]

Yes you are right, i do not like the wax because it leaves residues and the flame is risky. You can see all the "furry" because i take close ups and the light is all around the picture frame.

[@md.shohelaminacs8125]

its great work, how much it is

[@JohnsWoodenShips]

Thank you! What do you mean? Do you wish to know the cost of the model?

[@md.shohelaminacs8125]

@@JohnsWoodenShips exactly, I want to know the price

[@JohnsWoodenShips]

@@md.shohelaminacs8125 It's approximately 500 euros.

[@md.shohelaminacs8125]

Thank you so much,

[@JohnsWoodenShips]

@@md.shohelaminacs8125 :)

[@billyjohnston4244]

Remove the black container,it clutters the view,thanks

[@JohnsWoodenShips]

The black bug is at the left and far away from the model, it doesn't block anything or meshes up with the focus.