SAP MM--Quota arrangement configuration for business process- Full overview explanation Visit- Studyuuu SAPMM for all configuration videos
Пікірлер: 114
@Ankitasingisetty3 жыл бұрын
I must say, Anything from small to big doubt will get clear by watching ur video. your videos are the best to understand. Thank you so much sir.
@StudyuuuSAP-MM-EWM3 жыл бұрын
Your welcome and thank you
@devendrasaroj42632 жыл бұрын
Thank you so much for sharing your knowledge with us. I hope this channel will grow fast and mainly people should about your knowledge and the way of sharing it.
@StudyuuuSAP-MM-EWM2 жыл бұрын
Thank you, Hope it will reach to everyone
@kschanda21Ай бұрын
Fantastic video
@Ronal_Sohit Жыл бұрын
Beautifully explained. Thank you...
@harthik8864 жыл бұрын
Explained very well, thank you so much sir
@StudyuuuSAP-MM-EWM4 жыл бұрын
Your welcome
@raghunathpoul59112 жыл бұрын
it is all clear understand consept frist time watching video nice explenation
@StudyuuuSAP-MM-EWM2 жыл бұрын
Thank you
@vedashritalwar95412 жыл бұрын
Superb explaination sir.. thanks😍
@laxmangorre5681 Жыл бұрын
Superb explain
@manojm87453 жыл бұрын
Nice video im clear today Many Thanks to you
@StudyuuuSAP-MM-EWM3 жыл бұрын
Your welcome
@sudhan35732 жыл бұрын
Amazing 👏👏👏
@shivannahchalavadi26002 жыл бұрын
Thank you sir this is very much useful
@MuneesMeenaBLR3 жыл бұрын
Very well explanation thank you:)
@StudyuuuSAP-MM-EWM3 жыл бұрын
Your welcome
@naiksharat81346 ай бұрын
thanks for your amazing support sir 🎉
@hectorleon94712 жыл бұрын
Thank you a lot it is very clear! I will suscribe, can you please tell me whats is the difference if I skip the source list step? or what is the usage to have source list if you are using quota arrangement? Thanks!
@skumarkishore13134 жыл бұрын
Hi Sir, Thanks again for your reply to quires and questions... In Quota management... can we have a extreme scenario of having Consignment and Sub-con Quota allocation by the MRP RUN ? what settings needed for this ? can you in future make a video of this for aspirants looking in to this deep dive.. Thanks in advance..
@StudyuuuSAP-MM-EWM4 жыл бұрын
Selecting special procurement in MRP view to subcontracting/consignment will work your scenario Will make a video in future
@nirajrathod84472 жыл бұрын
Best explaination Sir 👏🙏
@StudyuuuSAP-MM-EWM2 жыл бұрын
Thanks
@swasatabhattacharyya4149 Жыл бұрын
Very useful
@anshitajaiswal4512 Жыл бұрын
Thanks for sharing your knowledge with us and uploading the video... Make more videos... Make video on RELEASE STRATEGY OF STO
@StudyuuuSAP-MM-EWM Жыл бұрын
Sure I will
@drsnakmantv1451 Жыл бұрын
Hi,, it's good video. Thank you. Although I am stuck with this option, as the suppliers have different country of origin. CoO are maintained in material master, we are not using Batch Management. What is the best way to assure that CoO will be matched with the right vendor CoO when transferring the components from our stock by STO's (to our other production plants, or distribution)?
@sandeepshetty76392 жыл бұрын
Excellent💯
@mahanmohan5 ай бұрын
Thank you so much its pretty clear. I wanted to ask also will the PR Quantities Split between 3 vendors ? Like if I make a quota master as distribution as 30 30 40 Quota % and I have requirement of 100 pc and i do a MRP run is it possible all 3 vendors gets a PR of 30 30 and 40 via some setting?
@skumarkishore13134 жыл бұрын
Thanks Sir for your generous explanation, can you shed some light on the indicator 1X in quota arrangement settings, when is it put to use in practical scenario, and like MRP i see there is MAX and MIN Qnty in Quota also, which is going to clash and confront with Material master settings in Material right, why they are maintained here in Quota again here ?
@StudyuuuSAP-MM-EWM4 жыл бұрын
Maximum quantity u will update when you would like to stop considering the vendor for quota, because u can’t delete the quota but u want to avoid that vendor to be selected for lowest quota
@muheebshaik45934 жыл бұрын
Good presentation 👍
@StudyuuuSAP-MM-EWM4 жыл бұрын
Thanks
@punammutke24564 жыл бұрын
Nice explanation sir. Please upload video on physical inventory process
@StudyuuuSAP-MM-EWM4 жыл бұрын
Sure It’s In my list
@kushkumar3200 Жыл бұрын
Thank you sir...
@harshmadhavi1115 Жыл бұрын
sir in meq1 tcode it will not showning anything system are showing abap runtime ERROR what will i do
@sanathkumar64993 жыл бұрын
Hi thanks for video, for PR it is not updating in quota arrangement,but while Iam doing po it is updating
@ganeshganesh15923 жыл бұрын
Great correct procedure
@StudyuuuSAP-MM-EWM3 жыл бұрын
Thank you
@raghunekkanti2186 Жыл бұрын
thank you sir if we need delete or block quota what are the steps
@srisrikanth102 ай бұрын
nyc explanation
@StudyuuuSAP-MM-EWM2 ай бұрын
Keep watching
@januravi14 жыл бұрын
Hi I understood the topic thanku
@StudyuuuSAP-MM-EWM4 жыл бұрын
Your welcome
@sivanand.b4474 Жыл бұрын
Thanks🙏
@sanathkumar64993 жыл бұрын
In the PR when I am clicking on assign source of supply , system is showing vendors, info/agmt/price, I had already configured the quota arrangelent
@StudyuuuSAP-MM-EWM3 жыл бұрын
Activate Quota for material in master data
@srujanadornala96523 жыл бұрын
Hii sir, Is it mandatory to give quota % equal for all vendors..?? And what if all the vendors got same quota ratio??
@StudyuuuSAP-MM-EWM3 жыл бұрын
It’s not mandatory The total should be equal to 100%
@gopinathr.85062 жыл бұрын
Thank you for this video sir.. is this mandatory to maintain info record and source list for quota arrangement?? Or can't we maintain quota arrangement without those records??
@StudyuuuSAP-MM-EWM2 жыл бұрын
Quota info record is mandatory and source list is just required to control but not mandatory
@gopinathr.85062 жыл бұрын
@@StudyuuuSAP-MM-EWM thank you for your reply sir..
@sumit98923 жыл бұрын
Thank you sir, Do you have material valuation videos ?
@StudyuuuSAP-MM-EWM3 жыл бұрын
No
@vivekvijaykumar9203 жыл бұрын
what is minimum split quantity in the initial screen of quota arrangement?how is it considered?
@StudyuuuSAP-MM-EWM3 жыл бұрын
It’s defines the lot size if suppose before splitting quantity how much is the minimum quantity to order from vendor
@sudhakarc70484 жыл бұрын
How and when will be the base quantity will be updated for first two vendors 100324 and 325.. please explain
@StudyuuuSAP-MM-EWM4 жыл бұрын
When you are adding the 3 rd vendor in the middle of the cycle
@rakshithn1022 жыл бұрын
For 3r d vendor u dint maintain PIR. u directly added in quto arrangement. wt will be the difference b/w those 3 vendors
@StudyuuuSAP-MM-EWM2 жыл бұрын
It will not pick 3rd vendor as source
@LovepreetSingh-qx1yl4 жыл бұрын
HI, I have created the everything as you created in the video. but after creating the PR system is not allocating the quantity in quota arrangement. Please help sir
@StudyuuuSAP-MM-EWM4 жыл бұрын
Once please create PO for that and check whether it’s allocating or not
@LovepreetSingh-qx1yl4 жыл бұрын
@@StudyuuuSAP-MM-EWM i have created the PO as well still its not allocating the quantity. I am not able understand. Please help
@StudyuuuSAP-MM-EWM4 жыл бұрын
Something mistake u done, please check all configurations once and try it Try with new material and everything new if it’s IDES system
@meeravalishaik9905 Жыл бұрын
Hi How to restrict maximum purchase Quantity from a supplier to certain Quantity for a period of time? For example; after purchasing 100 Quantity, system should not allow any further purchase from same supplier. Must be other suppliers in the Quota Arrangement.
@techventhub32814 жыл бұрын
Good explanation.
@StudyuuuSAP-MM-EWM4 жыл бұрын
Thank you
@techventhub32814 жыл бұрын
@@StudyuuuSAP-MM-EWM But your pace of speech is fast. If possible please work on that. Apart from this its good..
@StudyuuuSAP-MM-EWM4 жыл бұрын
Pankaj Kumar sure
@vijaykumarreddy95984 жыл бұрын
Well explained 🙂
@techventhub32814 жыл бұрын
May I have your email address or contact number? Email: pankajk059@gmail.com
@dhanrajbondge72 жыл бұрын
super
@StudyuuuSAP-MM-EWM2 жыл бұрын
Thanks
@akshaychaudhari96552 жыл бұрын
sir can you please explain what is maximum and minimum lot size?
@kmp_writes2 жыл бұрын
Have to released pr and po sir for this and anyother process have to do GR
@StudyuuuSAP-MM-EWM2 жыл бұрын
I didn't understand your query, email me studyuuusapmm@gmail.com
@logicalgaming42983 жыл бұрын
What if I give 60% and 40% for 1st and 2nd vendors respectively?
@StudyuuuSAP-MM-EWM3 жыл бұрын
Whatever u give ...do the calculation Least quota value will be used for source
@subramanyam53773 жыл бұрын
What if quota is assigned as 80% and 20% . How long system will take 80% vendor and when it will take 20% vendor . If we didnt mention any maximum quantity.
@StudyuuuSAP-MM-EWM3 жыл бұрын
U can check the formula, it will take for whole time
@srinivaskarteek73 жыл бұрын
Allocated quantity showing negative value. Why and what I need to do bro. Please help
@StudyuuuSAP-MM-EWM3 жыл бұрын
Can you please check type of orders created for those material and plant
@srinivaskarteek73 жыл бұрын
shcedule agreements and forecast is there
@vishnureddy32732 жыл бұрын
quota percentage can give only in equal percentage (or) our convenient can give any percentage
@StudyuuuSAP-MM-EWM2 жыл бұрын
Both are possible
@bharathkamani19164 жыл бұрын
In S/4 HANA in material master quota, the quota arrangement usage field is obsolete.
@StudyuuuSAP-MM-EWM4 жыл бұрын
S/4 Hana,Quota arrangement can be used any of the source of supply but Purchase Info Record are proper source of supply to use quota arrangement to use
@bharathkamani19164 жыл бұрын
For that SAP replaces Auto sourcing flag in info record.
@bharathkamani19164 жыл бұрын
@@StudyuuuSAP-MM-EWM okay agree with you but in master data SAP obsolete the field.
@StudyuuuSAP-MM-EWM4 жыл бұрын
Yes
@StudyuuuSAP-MM-EWM4 жыл бұрын
Bharath Kamani MRP will consider the quota and for this auto sourcing needs to be enabled
@adityadeshpande13263 жыл бұрын
What is the T code for quota arrangement MEQ1 OR MEQ3?
@StudyuuuSAP-MM-EWM3 жыл бұрын
Meq1.....meq3 both But creation meq1 and display meq3 - change mode available
@adityadeshpande13263 жыл бұрын
@@StudyuuuSAP-MM-EWM while creating PR at the first time why did it take the 1st vendor when we clicked the source of supply i.e (100324)
@StudyuuuSAP-MM-EWM3 жыл бұрын
It's taking in sequence for the first time if quota percentage is same
@adityadeshpande13263 жыл бұрын
Please explain thanks in advance
@StudyuuuSAP-MM-EWM3 жыл бұрын
I already explained in many videos regarding this issue
@rameshreddy68133 жыл бұрын
sir , can u tell what is Quota base quantity?
@StudyuuuSAP-MM-EWM3 жыл бұрын
Whenever you are involving new vendor, then u will add base quantity to get equal opportunity to all the vendors
@saurabhnikam4847 Жыл бұрын
GOOD MORNING SIR, HOW TO CREATE QUOTA ARRANGEMNT USAGE
@teresarayavarapu79693 жыл бұрын
Please provide video for quota split also
@StudyuuuSAP-MM-EWM3 жыл бұрын
Split vendor ok But most of the companies will not recommend that
@teresarayavarapu79693 жыл бұрын
@@StudyuuuSAP-MM-EWM yeah but ..just for understanding purpose I asked..and thank you so much for the videos which are very clear and easy to understand. Please if possible try to make a video regarding split quota also.
@StudyuuuSAP-MM-EWM3 жыл бұрын
Sure, Thank you
@pritamdubal7183 жыл бұрын
What is the service quota?
@StudyuuuSAP-MM-EWM3 жыл бұрын
Some services uses UOM, where maximum units service u will use from vendor Very rarely u will see this scenario