I 3D Printed GeminiTay's Hermitcraft Minecraft MegaBase

[@JessLess]

Thanks to Milanote for sponsoring this video! Sign up for free and start your next creative project: milanote.com/jessless

[@ThebinaryH]

nice

[@ParrotPerchStudios]

Can you share the 3d modles?

[@davidaugustofc2574]

The most important thing about resin is not breathing it, especially if you're going to use that printer more often moving forward. Put it in a room you don't use very often and close the door so that any fumes won't settle down around your house.

[@Kenny_RPG]

Great one

[@Squishyobsidian]

i was like yooo this sponsor sounds dope, wait, there will be a like 15 bucks a month subscription fee... ITS FREEEEE!?!?!?! WHATTT also the making part of this video and the software was suprisingly the most interesting part to me. very cool.

[@GeminiTayMC]

This is so cool! omg

[@GoldyThorn]

YASS

[@Xpar]

So True!

[@akaviral5476]

It's gotta be super neat to have one of your projects you worked on for years be so beloved that someone took the time to replicate it in real life! Love it!

[@warrenbaker4181]

was wondering if you would show up :)

[@anhaadevoursyou]

react on this video

[@GoodTimesWithScar]

Don't worry, Scarland fired all the lawyers so we had more money for Churros lol The castle looks fantastic and what a wonderful video :D

[@dreamy1404]

good, we need the churros.

[@mynameissanttu]

Churros are always more important than lawyers. Good budget management scar!

[@JessLess]

HA! Now that sounds like a good business model right there. I'm so glad you liked the 3D print and the video!! It means a lot coming from you :)

[@Hermitcraftisfun]

Of course! We couldn’t possibly have lawyers instead of churros!

[@piperricca7832]

do not fear, hotguy is here!

[@lolli_popples]

“Since it’s in the back…” Ah yes, the true spirit of Hermitcraft is captured in this build.

[@PaarthGuptaYT]

Exactly my thoughts!

[@discotechgaming]

Grian: "I raised that girl."

[@_Kamura_]

​@discochaotica "look at what you've done to my girl"

[@collicou]

the fact that the Scarland castle was just a side quest kinda blows my mind

[@CloverEtoile]

Not all the Etho heads 😭😭 I love that she scattered them all around her base, it made for a nice easter egg, but also nooo Ethooo 😂

[@Speed001]

She could've used commands to replace the head block with sand or air blocks.

[@DanielBakerN]

The resin is not just toxic to touch but toxic to breathe. Resin printers contain volatile organic compounds (VOCs) in higher concentrations than FDM printers. VOCs are gases that can evaporate or leach out during the printing and post-processing stages. In large doses or after prolonged exposure, VOCs can be a potential health hazard. Please do your printing in a well ventilated area!

[@jaxpianoteacher]

Thanks for informing me about it!!!

[@katherinek6166]

The shade thrown on Mumbo's base was savage.

[@domspeller6474]

Deserved 😂

[@katherinek6166]

@@domspeller6474 Yeah. Though, I should probably clarify that it's deserved shade on base, not on Mumbo. Him struggling with that build made for good content. Sometimes a failure is just as spectacular as success.

[@crdm]

a shade that the base does not produce

[@acerniss]

⁠​⁠@@crdmunderrated comment lmao

[@manickagalaxy]

@@crdm i think that one singular wall makes at least bit of a shade

[@iamsushi1056]

First somebody printed DO2, now Gem's Castle. I can't wait for all the "printing hermitcraft" channels to do a collab and make the entire world download

[@snakemaster254]

Imagine a 3d print of every season so you can mix and match mega builds

[@ForbiddenCrewM8]

That would just be absolutely insane but also the coolest thing ever.

[@discotechgaming]

Whoever has to figure out how to do Etho's base: "Lord give me strength."

[@Speed001]

No way, I'd guess it'd be best to pick and choose the interesting parts to print. Then do some work to shorten the distance and meld them together. Minecraft is huge.

[@DragonicArchitect]

build the (hermitcraft) earth

[@rachelsoma987]

Amazing work! May I suggest something with resin printing? After you have solidified a model, hollow it again in your slicer (I like 3mm walls) and add some drainage holes. It saves a lot of resin and the solid interior isn’t as fully cured as the outside after it gets its second cure and can still cause splits. I’ve been resin printing for years as part of my job and it’s always a learning curve - you did a spectacular job and should be so proud of yourself!

[@Daealis]

Yup, this is the thing I was screaming internally too at. With miniatures I go as low as 1mm with walls at times and have not had any issues. This is very easy to do in the same 3D printing toolkit that you already were trying in Blender! It has a tab for "edit", which has a button that says "hollow". Click that and you'll get 1mm walls by default, but you can adjust both the thickness of the walls and the internal resolution (to save on file size). After that hollowing out you only need to make some drain holes to the top and bottom of the model to prevent suction forces from ruining the print. All of that could easily be added in fifteen minutes (once you know what you're doing). I'd recommend putting your resin models on a plate wherever you display these, unless you threw them away after printing. They're both big enough that they will weep uncured resin at some point. From my own dumb first prints, I think one 10cm tall bust wept for the first month after I thought it was cured, because I left it solid. I left it in direct sunlight at a window, without any primer on, and rotated it every now and then until it looked like nothing leaked anymore. For cleanup of the table, I recommend getting an oven tray! Couple of bucks for a metal tray you can remove the prints from the plate with, and handle all the resin-drippy bits. Easy to wipe down and not ruin your desk. They do make silicone mats for the purpose as well, but you can buy a dozen oven trays for the same price and they get the job done.

[@craz2580]

The wow at HotGuy's poster was amazing

[@Misha_Katsuki]

🏹

[@IsaacAnvilreign]

The only true reaction

[@Wepwaet]

Another Issue that might have been contributing to print failure was that you were printing in front of a window. I have both and SLA and FDM printer, and I've found that for my Elegoo 1) any UV light from the sun can start the curing process so it would have been better to have the blinds closed until the hood was on for printing. 2) TEMPERATURE can cause warping and failure of UV resin. so even if you opened the binds back up, the heating and cooling sitting in front of the window could contribute to failure, other than those two notes, well done. hope you stick with the 3d printing its a fun hobby.

[@alicetorstewart6457]

oh good, i wasn't the only one that was considering that. i don't have a 3D printer though so i didn't want to state my opinion as a fact.

[@rosevela2316]

I love the way you show the whole process! As an avid Hermitcraft watcher, I love it when people outside of Hermitcraft talk about Hermitcraft and make videos about it, and your DIY projects might be my favorite Hermitcraft related videos I’ve watched! Using the timelapse and intro music of different Hermits for some of the segments was a really nice touch as well! I thoroughly enjoyed watching this!

[@yackyy]

Yes! I agree 100% it’s so nice to see hermitcraft content outside of the server 🥰 loved the music segments and this whole video so much! This video was really great for the in between season blues 😇

[@yackyy]

Yes! I agree 100% it’s so nice to see hermitcraft content outside of the server 🥰 loved the music segments and this whole video so much! This video was really great for the in between season blues 😇

[@yackyy]

Yes! I agree 100% it’s so nice to see hermitcraft content outside of the server 🥰 loved the music segments and this whole video so much! This video was really great for the in between season blues 😇

[@OuroborosAnarchy]

I love that the moment you went for scarland castle, that ‘superfast build mode’ music started playing.

[@leucocrinum]

“Howling” by Lupus Nocte :)

[@underverse2006]

Be sure to keep the area you work in well ventilated. It could also be helpful to have a respirator to wear

[@lobbyhoe01]

You absolutely have to wear a respirator when working with any amount of liquid resin, none of the various fumes it gives off are safe no matter how you look at it. just PLEASE wear a respirator (made to filter organic vapors at least up to 20x the officially "safe" limit, or you’ll die anyway) or buy a laboratory grade fume hood if you don’t care what money is

[@lacrosseman02]

Scar's "super fast build mode" music is ICONIC and will forever be stuck in my head.

[@vit.budina]

That's awesome! You got a lot of things right on the first try, considering you never used a 3D printer before, good job! There are obviously some pitfalls in the resin 3D printing process, some of which you've encountered, and which gave you some problems after printing. For example, if you ever decide to print more Minecraft exports (or anything else basically): large, flat areas are bad for the process because they start out as an incredibly thin, flimsy layer of barely cured resin that has to hold itself together and that has almost no structural stability when peeling off the film on the bottom of the resin vat, hence the warping on that one large, flat area. To avoid that, it is good to rotate the model such that none of those areas is parallel to the buildplate, for example, if printing a cube, balancing it on one of the corners and holding it up with supports should help a lot. Additionally, if you ever decide to print some bigger things or things that need to be strong (like cosplay props), I'd recommend the filament printers, since a) they are less messy, b) the parts are way stronger, c) you have way more freedom in certain areas, d) the material is cheaper and you don't have to print your models solid throughout. The resin process is better for miniatures and things with fine detail, that's why people often use it for DnD minifigs and other detailed stuff.

[@JessLess]

Yo thanks that's really helpful! I always saw people tilt their models but I thought it was something to do with the print layers. I'll keep these tips in mind for future prints :D

[@vit.budina]

@@JessLess happy to help! If you ever have more questions about anything 3D printing, feel free to ask :)

[@zacktipate9343]

Hi, two points: 1) Thank you for showing the process of 3D printing and how the main struggle is with software programs. I need to learn 3D printing for my own business. 2) Don't ever feel bad about the tiny brush. My best painting that got noticed by a professional fantasy illustrator was done only using a 000 brush.

[@biozombieactive8792]

Resin printer tip: dont keep it by sunlight when printing. Even with the cover on!

[@Yuro_Writes]

I watched the whole hermitcraft season from gem's POV and I absolutly loved it. That's why I'm so exited to see you create her amazing mega base

[@BlueBanana.]

I missed the entirety of s9 for some other pretty toxic fandom and coming back to hermitcraft is such a nice change of pace

[@Kyrusisgone]

@@BlueBanana.psssttt.. which fandom

[@BlueBanana.]

@@Kyrusisgone *the gacha community* Edit: I wouldn’t say it’s a “fandom” actually.

[@Kyrusisgone]

@@BlueBanana. oh yeah our community is pretty odd innit

[@BlueBanana.]

@@Kyrusisgone “our?” No way that’s crazy

[@That1Thing611]

Omg Geminislay

[@-s0m1k-]

Speaking of warping, the best thing to do to fight it is to hollow out the model (2-4mm thick walls), leaving few holes for resin to flow out, and it’s better to put a model fully on support so the burn-in layers (the first ones with longer exposure) will stay as a part of support island. You can see what I mean in a lot of tutorials here on KZbin

[@madi7178]

My Uncle adores hand painting miniatures, he airbrushes nothing and his ombres and fades are fantastic, seeing you paint this made me think of him. He probably wouldn’t like the hassle of 3D printing but he loves the painting part. The addition of the hot glue felt so right!

[@graham1403]

Your minecraft avatar looks like she could be Grian's sister.... Nice choice of base to print...Gem is a wonderful artist and she'll be thrilled to see this I'm sure. Hopefully she does. Also, nice detail with playing Scar's Superfast Buildmode theme song quietly in the background.

[@MichaelHardmanMinecraftDragon]

You do realize that this did not help me in convincing myself that I don't "need" a resin 3D printer..... This is such an amazing project and love the style and aesthetic you have for all of these projects! I am so happy and proud of what you have done. I discovered you through your recreation of Grian's starter base, and have been here ever since. Keep up the hard work! I hope to eventually have a portion of your skill in stuff like this!

[@truckerdave8465]

I have a filament printer and omg I super want a resin printer. Like so much. I’ve just started watching, but just be sure you have better ventilation and stuff. Resin printers need more ‘accessories’ and space because they’re super toxic.

[@MichaelHardmanMinecraftDragon]

@truckerdave8465 I've actually done a little bit of research into resin printing, and I quickly learned about how toxic it was and the need for good ventilation. Appreciate the heads up.

[@truckerdave8465]

@@MichaelHardmanMinecraftDragon Good! But also let me enable you, we totally need resin printers! Lol

[@RcktScntst]

Love the print! I’m glad you got inspiration from my print of Tango’s base! Keep up the good work.

[@wazzu4488]

If you're getting into resin printing I recommend transitioning from Chitubox to Lychee Slicer, it automatically detects and supports islands and cuts down on prep time immensely.

[@enkays_den]

I love this! Gem is great ❤ As a maker who knows a lot of resin people, I highly recommend getting a respirator and an exhaust fan if youre going to keep this setup in a space youre living in

[@Briar_Rose_Cosplays]

I hope Gem sees this!!! It’s so incredible!

[@featherofajay4667]

She saw it! She left a comment. I'm so glad she did!

[@kdubs6130]

either print with a raft which is basically a angled edge so you can get your blade in easier OR get something like a magnetic flexible build plate that attaches and detaches and you can just bend it a bit and itll pop the models off easier

[@J.P.ArtAndStuff]

Watching Nerdforge in the background while working on a project is so real omg

[@Satanioc]

big thing about open interior resin prints. make sure you have drain holes. if you don't the pressure inside the build will build up and eventually it'll pop open itself usually leaking resin over the place

[@Satanioc]

it can either take a really long time or a really short time but regardless without drain holes its like having a resin ticking time bomb on your shelf

[@Satanioc]

I got to the point where you realized that right after I commented lol

[@highlandmediaalba699]

Can we just take a minute to appreciate while she was getting the scarland castle set up, she had the timelapse music on in the background! Love the video so much!!

[@dwagongirl-9327]

This is just an idea but, how about making the whole server as a miniature map irl. Like the miniatures you are doing but all put together to make a map possibly for DnD?

[@glyfleball]

Hey I know you said you just discovered that miniature painting as a hobby existed but I’d definitely look into getting the proper respirator and filters for that airbrush! If you plan on using it long term the paints you use might give you lung complications if you don’t handle them properly with all the spraying. Great video and nice work though 👍👍👍

[@sonicdart3896]

same for the resin printer

[@lobbyhoe01]

@@sonicdart3896 especially ANY liquid resin. That stuff will definitely give you more types of cancer than you can count.

[@Just-Yap]

I won't lie, I think you pretty much did a crash course on 3D / 3D printing with this project. You're a beast chief !

[@iamsushi1056]

Air-dry clay separates quite easily from resin prints, but superglue and baking soda is a better medium. (Wear a respirator though!) I'm not trying to backseat, "oh, hurrr durrr, redo the whole thing", just friendly advice for next time!

[@iamsushi1056]

a bit more on this: the method I mentioned basically welds the two printed segments together, but it sands really well, so it's easier to reshape and sculpt than cured resin, which is relatively soft. Also, it produces a bit of heat, so it's better to use this technique sparingly.

[@lunadepti]

3d printing is so cool! Ive always wanted to do it

[@kezi7728]

This looks amazing!! Also my vote for the next one is the 5am Pearl tower (with a mini Tilly and Pearlo to go with it)

[@DJPastaYaY]

Now this is impressive!

[@katieglow95]

1. Thank you for putting your hard-won problem solving process in the video for anyone who wants to try something similar! 2. This was amazing, the model looks great, and I’m subscribing. ❤

[@leonardomacleod]

A good tip that I do is to head up a little bit the build plate using a hair dryer and also is good to use a scraper that comes with the printer, just blow some hot air in the direction of the part of the print that is touching the build plate than use the scraper slowly pushing the scraper underneath the printed object.

[@WormwoodRedemption]

Greetings from the Warhammer 40k Fandom! We paint mini's all the time, it's a lot of fun once you get the basics down! You did great with this project!

[@ProSkillzDragonGal]

I love how used the music from scar's super fast build mode

[@EldarsLab]

Good job! I also like how you used the music depending on the Hermits base you're working on ^^

[@HankThePug1119]

lol love that u used Scars Timelapse music while making the Scarland castle

[@NerfProNeverDies]

6:50 This is my type of dumb humor yay, You have earned yourself a sub. Weird how your not at 1mil yet, very good video and im not even half way through it

[@zackmarkham4240]

You could have just used Blender to model in extra little holes in the floor of each level of the base that resin could leak out of after you pull it off the build plate, just takes some jostling around before curing. A lot easier than filling in the empty space, would have also saved resin. And the 'can't put the paint on too thick as it would be noticeable'. As a miniature painter, thin your paints and apply a few thin coats. Fine-tip non-poofy brushes are your friends, too.

[@KayaWolfHorse]

This is so unbelievably cool! There’s something wonderful about having a physical piece of a digital project

[@Ben_Fett]

What an awesome project! Thanks for showing the whole process including the struggles, the test projects, and the whole workflow involved! Really made the final result that much more satisfying. I need to try something similar one of these days!

[@Trueflights]

Chitubox actually tells you an estimation of how much resin the print will use. There are fill lines in the resin vat that you can use to get the right amount in the tray.

[@fruity4820]

This really put into perspective how 3d printimg isnt just "click the button and let the machine do all the work". The final produck looks amazing

[@jordyv.703]

I've owned a Mars 2 pro for a few years now and it's so nice to have! It's compact, decent build size, and once set up, very reliable. Haven't had a failed print once after I got the test prints working

[@Dalenthas]

Loved the use of the Superfast Build Mode music during the Scarland Castle segment 😅

[@kingdanett4043]

The overcomplicated muti app process hits so hard for me, especially as someone who likes to mod games and consoles. I ended up making a folder in my downloads called "messy installs" for things I knew were gonna take multiple files or multiple applications

[@Kekzprinzessin]

I love that you used Howling as Background Music for thw Scarland print! The Result of the Prints is so awesome, I love them!

[@tayeevee]

my gosh this is incredible!! how much i wish i could have my own print(s) of my favourite hermitcraft builds watching gem's elven palace bloom through season nine was wonderful, absolutely one of, if not, my favourite of builds 💚

[@masterpig5s]

I’ve wanted to print hermitcradt builds or worlds and I’m just happy someone got to it

[@eclairecat6126]

not only is the build absolutely gorgeous and a masterpiece, your video composition and engagement is incredible, i was fully emersed in the video the entire time, and it was very enjoyable to watch!! and your perseverance to learn and complete the project is astounding!! you've earned a subscriber from me :]

[@Byepixle]

first of all, amazing video, second of all, thx so much for explaining the process and struggles you went through, some day I wanna print a minecraft base too and being told all the programs and magic buttons will probably make the struggle quite a bit more bearable if I ever try this.

[@Astr0_Man]

i really hope Gem sees this bc THIS IS AMAZING!!!! ik i could never do this, my hands r too unsteady(i can hardly do lineart 💀)

[@dbseamz]

Regarding the sticking-to-the-buildplate issues, they make flexible magnetic plates for 3d printers (at least for filament ones). The magnet sheet sticks to the rigid buildplate while printing, then when you're done you can unstick the magnet sheet from the plate and then peel it off of the print easier because it's bendy. Doesn't cost very much from what I remember, either.

[@remuladgryta]

Some slicer programs also come with an option to add an angled lip to the bottom layers so you have somewhere to get a scraper in under and lever against. I don't use chitubox so I don't know if it has that feature.

[@Trueflights]

They make a magnetic, flexible build plate. it pops right iff and you bend it to remove the models from it. 1000x easier to work with.

[@HazzleNt]

What you have is a resin printer they are usually more involved, however resin printers can print more detailed stuff like miniatures stuff like that. For a beginner like you a would recommend a fdm 3d printer they are more straight forward and less involved, however they aren’t as good at printing detailed stuff. But they can print a lot bigger, the one I have is the sovol sv06. I recommend an fdm printer. Hope this was helpful.😄

[@KPdewstar]

It turned out so good. Cant believe the dedication and persistence it would take to finish this.

[@arshamshayan]

it would be very impressive if you made a diorama of one of the megabasses from 2b2t, since they're absolutely gigantic

[@Werewolf914]

This looks amazing, I've wanted to learn to do Dioramas and that kind of thing, that's so much work but I'd say well worth it also have to say perfect timing with the new Season of Hermitcraft starting Saturday (February 3rd)

[@SirCadmire]

Nice work! By the way, to reduce the mess, you can usually fit the resin build plate into the wash bucket upside down, then run the wash! Then you don't have to pry a goopy resin covered build off the plate :)

[@SirCadmire]

And you can leave all those supports on during the cleaning process too! Just print, place the whole thing in the wash bucket with lots of IPA, then run the cycle. The metal basket for the wash bucket should have a couple places to rest the build platform on

[@yuGtahT]

You did so good! Definitely subbing!!

[@ClayStopMotionStudio]

This is so cool i love making set’s

[@ClayStopMotionStudio]

:)@TEX-MissJessLess-on-Te-le-gram

[@delgarisdysonsphereah-tuk864]

i have been dying for someone to create a mini version of the hermits bases or minis in general so this makes my day. i love it and i also hope that your next challenge will go by nicely.

[@Hunterfivestars]

Im happy i saw this video since now I know how to make those really cool world section cut outs.

[@stuffs8802]

Tip for painting minis. If you mess up, it dont really matter, you can paint over it and it will be ok.

[@Mossheart1129]

this whole process was absolutely amazing, it looks so good!!

[@NooPhorix]

OMG!!! well done! I'm a big fan of Gem, she's the best. Thanks for showing your beautiful model!!

[@CamdenAKAIce]

WOW!!! Not only is the model extremely well made, but the way you shot the video and edited it was so cool too! I loved seeing the process. Great work!!!

[@speedzebra6613]

This video was actually way more helpful and understanding how to 3-D print something, then taking a day and watching like a billion tutorial videos

[@m234as]

This is such a dope idea!! It always makes me so upset when series end and the mega builds are finished and forgotten about 😭

[@danielkrcmar5395]

You can add fill shapes to cut down the resin you use. Saves materials (money) but should also fix the warping.

[@eddie.exe.]

this is so cool!!! absolutely loved gems build and it looks so cute as a minifig! also i loved the way you explained the whole process of learning how to 3D print!

[@mip2381]

18:30 it's actually possible to use prusaslicer to separate the parts into a more easily sliceable print by using the "cut" feature and setting it to dovetail and then simply exporting the parts as STL's Hopefully this helps for future problems

[@squid_squishy]

Incredible work! Your perseverance through all the technical difficulties was so impressive. The final product looks lovely!

[@ryan_haigh]

@JessLess I've been looking at doing this for models my kids have built in Minecraft and your difficulty with the software concerned me. But having a look at the mineways documentation i think you were still having these issues with the filling and hollowing because you were exporting for rendering rather than 3d printing. The filling and hollowing options might be ignored because they are optimisations that aren't relevant for rendering. While mineways 3d printing export is focused on using shape ways commercial service it's still usable for at home printing though you might need to adjust options for best results. I think using the 'custom printer' for the physical material might be a good start based on the docs Take all of this with a grain of salt as i haven't tested myself but 'Id love to know if this would in fact fix some of your issues!

[@BreadNotBed]

12:15 proud to say I didn't get bored at all in this video! its very well thought out and I loved it even though the topic only started halfway through!

[@bargen0w]

ah the joys of 3d printing. that came out incredible! ive never considered 3d printing anything from minecraft before. i can see why. props to you on sticking with it and being patient enough. i probably wouldve gave up after a day lol

[@krystallitex7596]

heya. little tip on the printing . if your model is hollow make a drain hole. with out a drain hole you will have uncured resin inside forever. normally adding the drain hole on the bottom. some of the programs have a tool to add the holes .

[@cleebe823]

Tip: It's not just toxic to touch. Always use in a well ventilated area.

[@jengersnapgaming]

This looks amazing as always! I'm glad you were able to perservere through the challenges you faced to bring forth this beautiful final product!

[@longercats]

as a seasoned 3D printer i was yelling at the screen , i hope you printed these hollow with drain holes , else it's gonne crack pretty soon .

[@chloeeeezy]

Now I really wanna organize a team of software developers to build a software program that will generate "solidified" and divided 3D print files from Minecraft files, basically what tou spent a week using 5 different software programs to do 😂. Modern problems require modern solutions!

[@lolli_popples]

I’m currently binging Gem’s POV before season 10 comes out, so this is oddly appropriate lol!

[@Kyrusisgone]

It’s so cool!! I’m telling myself “don’t try another medium” x3 rn because I am inconsistent as heck haha

[@geoffmarsted1857]

You should really give grains based on a shot, I know it has a bunch bunch if floating sections but that’s why we have supports to add

[@b33inyourtea]

every time i finish one of your videos i just feel so inspired. like, i wanna make a mini megabase!!! you just have all these cool ideas that i could've never thought up in a million years. a river made of hot glue?? thats so smart!!! keep making these awesome videos

[@Ark_Nexus]

nice project, my suggestion if you plan to 3d print more, wash the print first, then using a hair dryer on low heat or warm water you soak the print for about a minute to soften the supports so they can come off much easier leaving less bumps and such then cure it. also if using chitubox the auto support feature is good but still best to go though and manually add supports if you think the project needs it to decrease the chance of failure in certain areas.

[@shanegibbens]

you need to send scar that castle or a another one of it. he love it!

[@DISCO-yum]

You should do more hermitcraft bases from previous seasons, this looks amazing ❤

[@CuriousMothling]

This is great. I would have recommended Xb's warden and villagers sculpture for a test print but the scarland turned out great!

[@EliotHochberg]

Good on you for sticking through the process, these kinds of things can be very frustrating. I’m also putting myself in the position of Gem, I’m thinking how moved I would be if somebody were to take this kind of time to create a miniature of something that I had designed. Nice job!

[@AjaxXavior]

This is epic also love the super fast build mode at the Scarland part!