Saturday Flyin' The OMP BIGHORN & the Shmoove E-Flight Carbon Cub

[@dutchloveRC]

fly while you can!

[@ChunkyC_RC]

We plan to Dutch 👍

[@jacksonrcaviation]

Real cool indeed, we have subscribed 😎

[@ChunkyC_RC]

Dido!! Thanx for the sub 👍

[@hydrojet7x70]

Cool video. 😎

[@JeffinLowerAlabama]

Chris sure was a great day for flying, nice having buddies to fly with. Jeff in LA USA

[@ChunkyC_RC]

The buddy system is few and far between due to friends moving around to other places etc, but we have great folks at the 2 flying fields I go to. If your ever in Winston Salem NC let me know. I'll fly witcha 😎

[@DadsRCHangar]

Great video Chris, women always drag you to places we don’t want to go. Great flying bud 🫡

[@randall4411]

Is it really that beautifully successful every time you guys go flying ? Thanks for taking me along !

[@ChunkyC_RC]

We do have problems sometimes 🤣. See my last video called "Failed Maiden". That day was full of issues but we just pushed through. I will say, we succeed more often than not. Thanx for the comment 👍

[@russneace8436]

Mannnn… She laughed out loud. The conversation you started with, we still talking about it.

[@brianbopp1632]

😂

[@ChunkyC_RC]

🤣👍

[@Krash_fpv]

I lived in Greensboro for a while back in 11

[@furball5553]

no bigger than 4 feet 49'' to be exact👍

[@Krash_fpv]

The bighorn is 49 so just bigger than 4 ft

[@ChunkyC_RC]

Just barely.. 80 thousandths might as well call it 4 feet

[@Krash_fpv]

Does the wing on the bignmhorn come off easy I drive an SUV and I bring like 4 planes with me and remove the wing on them....always wanted the bighorn but never found out about the wing

[@ChunkyC_RC]

Yes, the 2 wing halves slide onto a spar tube and has 2 nylon thumb screws that go through the fuselage and screw into the inboard rib. I would highly suggest using a short servo extension wire that stays plugged into the receiver to ease the burden of connecting all the aileron and flap servos. The receiver sits down deep inside the fuselage and it will be difficult to plug servo wires directly into the receiver every single time you install the wings. Hope this helps. Thanx for the question 👍