Save Money With A DIY Furnace Repair TRANE XC95m

TRANE XC95m Furnace Repair. Also works on other brands too!
Hey everyone! Made this video showing you what happened to my furnace and what quick fix a technician did to resolve the issue. So if your furnace is acting up and doing the same thing. Watch this video and Save your money doing this quick fix! No need to call the service people and it's safe to do.
Products that were used, affiliated links down below:
Oiiwak Inspection Camera丨Borescope丨Industrial Endoscope丨5.5mm Drain Snake Camera:
amzn.to/42xQUzl
Ridgid Wet/Dry Vacuum. Check Home Depot probably Cheaper:
amzn.to/3ur1cET
Prevent pests: Enoz Made in The USA Old Fashioned Moth Balls
amzn.to/3UDZMlh

[@bv2999]

Great Video! Especially about the Inducer Motor revving up and down like it was struggling. Question - How did you clear the nest out of the pipe? Did you have to disassemble it? Did you use a vacuum, or put a leaf blower in it from the inside somehow?

[@MrIII]

Thank you! Glad you found it helpful!! I used a shop vacuum to clear out the nest from the outside. Just removed the exterior pipe cover and my vacuum's hose had the same diameter as the pipe. So it worked like a dream! Apologies for the delay in response.

[@marklundeberg7006]

I have had my inducer chip a blade due to some kid throwing a rock into the outside vent. Also I've had it fill with water due to the drain clogging. No rodent issues yet... Knock on wood.

[@MrIII]

Wow! It sounds like you have some mischievous kids in your neighborhood! Fingers crossed the rodents stay away haha

[@bv2999]

Do you mean the PVC Intake Pipe comming into the Furnace filled with water? What Drain? Where is it located?

[@marklundeberg7006]

@@bv2999 the inducer fan filled with water. It has a drain system since it can get water coming inside, but in my case the drain system got clogged. I called a tech out because the inducer fan was gurgling but it was ultimately an easy fix-- he disconnected the drain and blew out the clog. Not a waste of money though because he inspected and found some other issues which I ended up getting replacement components for and fixed myself.