Saved from the Scrap Pile! 1970 Chevrolet K10 4X4! Abandoned for 26 Years! Will It Run?!?

[@keng2495]

This truck is garbage. Not worth the 700 he paid.

[@MortskeRepair]

How much is it worth then?

[@BS.Wickman]

@@MortskeRepair tooth fiddy

[@janeames1513]

motor and trans and transfer case is worth what he paid for the truck..seems like your timing is a little retarded b/c you are slow

[@corydriver7634]

@@BS.Wickman😂

[@janeames1513]

how much is a motor transmission and transfer case worth?..well over 700 bucks..shows how much you know about vehicles

[@dukedawg2288]

I’m glad they let you out on parole to make us great content

[@milwaukeeroadjim9253]

They send him back the bail money as a gift card lol

[@maxbialystock254]

Motortrend is gone. Roadkill is cancelled. LONG LIVE DUFF

[@tokslut]

Never let any Shareholders dictate anything!

[@Hootman865]

Duff and the Jailbird

[@junkmannythewitch7295]

When they hacked in a hellcat into the Mayhem the writing was on the wall, lots of people tuned out never to return. Derek saw this and structured his arise based on that mistake.

[@staind288]

Roadworthy rescues is gone

[@George-i7p]

​@@Hootman865 😂😂😂

[@junkmannythewitch7295]

The decline of Roadkill ( and a few other shows) happens when the talent for revivals is replaced with "lets order a bunch of shit from warehouses and bolt them on". There is nothing wrong with an upgrade ( a must for safety etc.), but also showcase the grit and vision of bringing a worthy machine back to service. You get this and that is why your content is top shelf and will continue to grow. Now go pull some stumps with the 4X4. A good junkman is a good friend to have!

[@MortskeRepair]

Thank you!

[@dc6233]

It's a bit sickening to watch them bolt on brand new donated parts, withbrand new sponsored tools, any problems and someone sends them the right part to fix it, it gets boring.

[@dextermorgan4337]

@@dc6233 I quit watching those shows once I started wrenching realized how unrealistic they are.

[@frankberrisch4474]

Is DD speed shop next ?? I got diarea watching. Stop watching month's later I saw him doing the same shit how many 2 door conversions can one do Gezzz wizzz damit dan

[@chuckschillingvideos]

Except this ain't a worthy machine. It is an absolutely broken piece of isht that should never be put back out on the road. The only thing that's being "revived" here is a threat to other drivers. No one ever seems to think about that when they go all goo goo over getting a junker going again and throw it out on 80 mph roadways.

[@robertrowe991]

How the heck does Mortske only have 194K subscribers? Great content and epic editing. Other KZbinrs should pay this guy to be their producer.

[@George-i7p]

Because he's not a sellout!

[@scotmetzger9405]

There would be even more subscribers. But I think everybody has seen every make and model of Chevrolet pickups rebuilt and revived so many times It gets a little old for me. Great for beginners l o l

[@gerry-p9x]

Duffy is deleting suscribers

[@monkeysbusiness]

He’s not very attractive.

[@copkent1]

Far better than VGG.

[@sscottphillips1973]

Again Mortske coming thru to make Mondays better!!!!

[@gerry-p9x]

And with an. Action line pick up to

[@kman-mi7su]

I don't know if you are a glutton for punishment Mortske, but we enjoy watching you bring these old clapped-out turds like this truck back to life. Your channel, Junkyard Digs, Dylan McCool, and Vice Grip Garage are my favorite revival channels. In fact, you have inspired me to take on a clapped-out turd too (not as bad as that one), a 1988 Ford EFF YOO FIDDY 7.3 IDI pickup that needed a motor. I found a used motor in Pennsylvania out in Lancaster County Amish country for 500 bucks. I recently swapped the engine in my driveway and I'm wrapping up some electrical issues and a coolant leak at the heater core to get her back in use. You even helped fuel my son's interest in this too, he helped me with the engine swap. I have done stuff like this before years ago, but you guys have re-energized me to get off my azz and do a project and best of all with my son.

[@FilomenaMckerley]

This definitely deserves more views. Everyone should watch this!

[@scotmetzger9405]

Lol Wow, never seen more Chevy trucks. On any other show going on. Something different would be nice. Love mornings with Mortske but needs to be shaking up a bit I guess Chevy's the only junk laying around LO.L just my opinion.Have a nice day

[@dextermorgan4337]

​@@scotmetzger9405 that's not a real person it's a bot.

[@scotmetzger9405]

@@dextermorgan4337 OK !!! my comment still stands lol

[@kurtisstutzman7056]

Why...?!

[@brianfairchild7819]

@@scotmetzger9405 fixing a ford or dodge would take longer than his 2 or 3 hour attention span (much longer than mine)

[@jamesragus1577]

Always amazed at the fact that you’ll test drive a vehicle that might break in half as you drive over the tracks!😊

[@MortskeRepair]

Life experiences

[@nephewIan]

The best part of Mortske is that he sounds like a real dude, it's refreshing.

[@LyleMyers]

Yeah it’s pretty obvious he doesn’t know the actual names for parts of the engine, like sparkolater, or fuel-makit-happener and lightening hoses. Good ol regular guy Mortske 😂

[@gerry-p9x]

@@nephewIan yeah we got confused with Dem high tech names o parts

[@LinusCloudbuster]

“Olive Oil” seems like a fitting name, thanks for the content!

[@gerry-p9x]

Kermit......it ain't easy. Being. Green

[@daniellebrindisi6378]

Olive oil is a good name, it has that Italian valve 😂

[@MortskeRepair]

I like it!

[@PauHana420]

Pimento

[@JeffChristen-s6s]

I think he would prefer to call it, sold?

[@ShaneLewis-n2o]

She got a few parts for a project, my dad loved those old trucks, so I think of him when I see one! Thanks for the memories sir.

[@MortskeRepair]

You bet

[@oncewaslost1982]

What a cool shitbox! I love the colors on that truck. Can't wait to watch through this one .

[@jobertvangool9961]

The one and only reason someone by his right state of mind wants to have the weekend over and done with! 👍🏼

[@iHap]

Yes! Duff in the thumbnail! Impossible project in the back ground! “Ok, so it’s impossible. How long will it take?” It’s gonna be a Great Day! Thank you Sir Thomas!

[@Jdz-dh3ob]

My day just got better

[@CJrun]

Quality Avacado. A paint scheme that depicts the outside and the inside. And the appliances back home when it was made!

[@rootnpearl]

Mondays with Mortske is great. Living my best retirement life.

[@MortskeRepair]

Awesome

[@gerry-p9x]

What's the radio antenna for. Talking. To the cows,%

[@chadburkle1461]

@@gerry-p9x it's to contact the cow House

[@tonygiraldes7848]

Looking forward to another adventure with Mr. Mortske and his crew! Just the greatest! 🙂❤️

[@dannygriffin8281]

It’s great you’re getting those older cars,trucks running again! Keep them coming.

[@MortskeRepair]

That's the plan!

[@sdnkjohnson]

Junkyard find. Mortske does it again. Enjoy your turkey day. Great videos as always.

[@MortskeRepair]

Thanks 👍

[@douggrunberg]

That Chevy needs 10 of everything. Thanks for the video.

[@MortskeRepair]

You bet

[@johnelliott7375]

1:10:39 Here comes the Boss checking out the mechanic genius.! Love to see you are doing good and making progress on everything that you touch!

[@steveperyer4850]

Heck Yeah! A Sir Mortske Video on my Monday morning 😊

[@gerry-p9x]

Chevy. Action. Lines rule

[@MortskeRepair]

Hope you enjoyed it!

[@JimsIfitaintbrokefixit]

Helping a Buddy out in the cold in time of need. You really aren't the Grumpy Old Man you play on TV.

[@LyleMyers]

I mean, he did call the guy an idiot 😂

[@AsswipeGarage]

Yeah he is 😂

[@MortskeRepair]

No comment

[@ney4na449]

Nice video and good to see you back in the tundra and resurrected another one. You were remiss in advertising the gun rack which is particularly special. There are two take -aways from this video: Take away number 1: Like a connoisseur of fine coffee, a small block Chevy appreciates fresh ground. Take away Number 2: When you played football in high school, you started out as third string, worked hard and became second string, continued to work hard and prayed to the almighty that you could become the, "Starter-Man". Be careful what you ask for!

[@LyleMyers]

haha great takeaways! And I too wondered why no mention of the gun rack. Definitely adds value.

[@hamairman6840]

@@LyleMyers Gun rack mentioned @ 2:40. I had to go back, but it was there.

[@LyleMyers]

@@hamairman6840 Oh nice, good catch I completely missed that! My faith in Mortske’s humanity has been restored!

[@HotrodTodd81]

Call it Pickle Rick

[@tommyvan4609]

Woohoo!!! Mortske Monday!!! Such a great day! I woke up to a few inches of snow so I will be pulling out my fat tire bike to go rip the trails, THEM coming home to kick back and enjoy Mortske shenanigans

[@stomper2582]

Get a life. Are you a trust fund millennial?

[@MortskeRepair]

Awesome

[@OldGrumpsGarage]

I will NEVER cease to be amazed at how many times I've seen a 50+ yr old Chevy V-8 roar to life with fresh gas and new ignition.

[@MortskeRepair]

Right on

[@davidwaynesingleton6826]

I've had really bad luck lately, my motor had a rod knock and I had to buy another motor. Now the weather starting to get cold and making it a pain to install !! I was excited to see the new Flannel shirts and I bought one !! So maybe my lucks about to change !! Have a great Thanksgiving !!

[@MortskeRepair]

Sorry to hear that

[@brianfairchild7819]

disclaimer... wearing mortske merchandise wont make you a better mechanic, but might keep you warmer

[@davidwaynesingleton6826]

Definitely not a great mechanic !! Lol But I can twist a bolt or two !

[@peterselten500]

Hi mortske an grew just want to say thankyou for all the videos an have a happy thanksgiving . Cheers mate🇦🇺

[@MortskeRepair]

Same to you!

[@tonyp9179]

Glad to see you getting your life back together

[@MortskeRepair]

Thanks

[@brianfairchild7819]

lets not hold his criminal past against him......is he still allowed to vote?

[@ironcladranchandforge7292]

Missed your video yesterday. I was on the road driving over mountain passes and serious snow storms. But my '05 Chevy 3/4 ton HD diesel 4x4 with heavy steel flatbed did just fine. It's a tank on unplowed snow covered highways. Anyway, I once owned a '72 Chevy K10 with the 350 engine. Drove it for years back and forth to work in all weather. It was a great truck and did well in the snow as well. All those years of driving that K10 it only broke down once. Interestingly it was the fuel pump. Quick fix and it was on the road again. Super reliable truck!!

[@MortskeRepair]

Awesome

[@GaryRobertonBoyes]

I Remember the Olive/ White Tu tone paint, they used to put it on camper trucks, as well as the Putrid Yellow with white. It' amazing how the 67 to 72's have held their value over the years... Cheers

[@milwaukeeroadjim9253]

I turned on the TV this morning and heard Tennessee Tuxedo and Chumley singing. Thought for a moment it was Mortske and Mojo. Happy Thanksgiving to everyone at Mortske Repair

[@MortskeRepair]

Same to you

[@donaldhollums3278]

My Drill Sgt at Basic Training would be proud of you, Morts, for not letting the “thing” beat ya but instead being smarter than the “thing”! I would like to withdraw the warranty claim for the magnet falling out on my “Screwed by Mortske” screwdriver, I found the magnet when I wasn’t looking for it.

[@MortskeRepair]

Send us an email

[@airplanemaniacgaming7877]

"Wasn't looking for it" That's how it goes. Look for something, and the damn pixies will piss off with it. When you aren't lookin, suddenly you can find it.

[@aprilhilliard3302]

Golly, we love us some Mortske on Monday! And this old girl was for sure rode hard and put up wet...kudos to y'all for rescuing her from the grave. Blessings, and have a wonderful Thanksgiving!

[@MortskeRepair]

Thanks! You too!

[@billtruett8593]

“Were going to do something “ is the subject of the day 🤣🤣

[@patrickmidiri1543]

Hey Mort, another great Monday Video. I am surprised how well the truck ran. Small block Chev engine u can’t go wrong. To all of you guys and your families Happy Thanksgiving 🦃 .Have good week.

[@MortskeRepair]

Thanks! You too!

[@tokslut]

Ooooh, SNOW! We got some over here in Sweden to, but it rained away :(

[@daviduglem3213]

Had 197 307 3sp 3:90s put in a 350ci never saw a hill (San Francisco, California) I couldn't climb in third gear. Love your stuff Morski and Chin

[@jeffhutchins7048]

MORTSKE MONDAY!!!

[@mikepoint4717]

The old Chevy still has some life in her , I loved the maple syrup joke lol. Cheers 🇨🇦

[@bobmcdougall5904]

The double header with the yellow 70 K20 is my favorite episode. 67-69's used the Rockwell T221 transfer case. That T case is noisy as heck

[@gerry-p9x]

Yeahpit efforts into exhaust wiring. Clutch. Get. 16. Inch. Late model van rims tires

[@mattrider9230]

dont forget to spray your goon spoon with dry silicone spray or weather proofing spray for boots and shoes. it keeps the snow from sticking!

[@robertwilliams8010]

DD’s Speed Shop would say that truck is MINT😎

[@MortskeRepair]

Absolutely

[@mikescott1307]

D's are fighting over trying to get a lift installed. All the talent..

[@AndrewHCann]

Excellent Video Mortske :) , MOJO :) , Duff Dog 🐕,, also yes little TLC goes long way on these truck to fix up and Happy THANKSGIVING to you all come up!

[@MortskeRepair]

Thanks 👍

[@gerry-p9x]

@@AndrewHCann a qwik. Flip after he re builds quad ra junk throws somemo boards. In the bed and gets a marine gas tank from tractor supply

[@KixBryant]

Looks more avocado 🥑 than olive to me 😂

[@MortskeRepair]

Ahhhh

[@thomaswermager1819]

Hey, there’s a load of miles left in that old 350! Maybe not the rest of it, but what the heck! Thank You & Duff for the ride!

[@noahingram8052]

I love fixing and driving trucks like this

[@MortskeRepair]

Right on

[@ghouliesgarage3922]

Doesn't matter how you get it done Cause sitting on you're arse Wont finsh your Project ..Another Solid "win" in the books Mortske ! Happy Thanksgiving ! 🦃🦃

[@MortskeRepair]

Same to you

[@joshuataylor4256]

This is a cool old truck. Fun seeing it come to life

[@kerrywootton2435]

I love old Chevy trucks. That is why I got my 67 step side back last week.

[@grantmelcher1830]

Winter is here! Glad I got the soft Mortske sweatshirt! Another great video guys!

[@MortskeRepair]

Awesome! Thank you!

[@jimmiebrown5014]

Love the color of that truck

[@charleykeenan6171]

Some old farmer see's this episode.. Recognizes 'Ol Green.. Tells his 60 y.o. son "I told you there was NOTHING wrong with that truck!" 😂😂 Another great episode! Thanks to you and Chin, Mojo and Duff!

[@MortskeRepair]

True story

[@KMaN5150]

Thanks!

[@MortskeRepair]

Thanks so much!

[@davida.p.9911]

My dad had a 72 Cheyenne he bought new. It had a radio/CB combo in it...really cool. It was GREEN. Good job getting this one running, Mort! 👍 We appreciate ya!

[@MortskeRepair]

Very cool!

[@garybrady9531]

Take duff to see your mom and dad and yall pass a happy Thanksgiving

[@MortskeRepair]

You too

[@kennethsonier1766]

Good afternoon from Cape Cod ⚓ My favorite generation Chevy and GMC trucks are 67 to 72. Man that truck certainly looks like a disaster but it came out of a scrap pile 😂 If the starter wasn't bad you would expect something much worse 😂 the damn thing has brakes? Yeah these trucks are definitely going up in value👍, because 🦃 they're 👍 indestructible 🦃 with 👍 normal 🦃 maintenance 👍 Happy 👍 Thanksgiving 🦃 to all of you in Podunk North Dakota. Thanks for another awesome video and all your hard work ✌️🇺🇲

[@MortskeRepair]

Thanks

[@Jacksonkellyfreak]

My grandfather had a 78 with that same dark green/light olive 2 tone. It got passed to my uncle and was around up through my teens. Old truck lived a hard life but it always was taken meticulous care of. It still looked like new paint when he sold it.

[@MortskeRepair]

Thanks for sharing

[@duckscustomgarage9239]

Just call it Oliver . Heck that Wilton vice is worth what you paid for the truck those are the best vices made LOL because I use to work at Wilton Tool in Schiller Park, Illinois. building vices and C-clamps .

[@MortskeRepair]

Absolutely

[@terryeustice5399]

Congratulations on the start and drive of the old pickup. Got yet another flip. Thanks for sharing! 💯👊👍

[@MortskeRepair]

Thanks 👍

[@stuartfletcher2378]

You are killing me . really , Your quip about the engineer mice !! I had just taken a gulp of my morning drink and I started to laugh . There was hot tea all over everything . Lucky thing I'm switching over to a new computer so this one can go straight to the trashcan . Thank You for an excellent video , Your work is always top notch no matter what you work on and the conversation is off the top and educational . A thank You goes out to MoJo , Chin . and Duff Dog the shop foreman . Ill be here to see your next video . A happy viewer , Stuart in Canada ..

[@MortskeRepair]

My bad

[@briankottman8274]

Roached but alive thanks to your efforts - and its history and assorted artifacts were fun.

[@rickrice3221]

Even if it’s not on my personal wish list, I do enjoy watching you turn crusher fodder into running projects! Happy Thanksgiving to you, Duff and the rest of the crew!

[@MortskeRepair]

Same to you!

[@johnbrunson1087]

Watching the mouse ride the flywheel Ferris wheel at 34:07= priceless lol.

[@thomasadrian9854]

Let’s not kid ourselves- Duff is the star of this show!! Hahaha… where’s Duffs merch??? Just yankin’ yer chain- love the show because it’s real, not like some that is a put on….Enjoy!!

[@UFPTX]

That front axle is legit!

[@TestECull]

1:11:00 A tweak to the timing made a WORLD of difference with my 71! It wanted a LOT more timing than it had and was somehow firing at 0º base. Made it act like it had a ruptured brake booster diaphragm even though it lacks a booster(IE clutch in brakes on it wants to flame out), made it want to get hot at traffic lights, made it sound like it had a hot for teacher cam in it at idle, and all the adjustment screws on the ol' MonoJet were extra borked up to try to keep it running. I fed it as much timing as a bone stock 250 inline would take without pinging on 87 E10 and got the carb back to earth. Huge HUGE difference in how it runs. No longer dies when on the brakes, no longer gets hot at lights, idles smooth as silk. I even found 4 miles per gallon! Squeaked 20 out of it not too long ago. I am 100% convinced my aunt and uncle parked my 71 because the clutch was shot, but it still wanted a LOT of timing put into it.

[@ft133]

Great video Mortske! Keep em coming.

[@MortskeRepair]

Thanks! Will do!

[@TestECull]

1:47 Pretty sure that's the same exact tire I put on my 71 C10! I love those things. Ride nice last nice and, at least for the snow we get in Tennessee, pretty damn good in it. May be a bit out of their element up in North Dakota though.

[@fab4nut777]

😊 hi Duff ❤

[@eliirvin5576]

I missed out on the Free Mortske shirts!!! Dang! Oh well. I’m glad those sold out for ya, bud. Be well, be safe and have a fabulous thanksgiving!!

[@JasonBackes]

❤❤,Another great one brother, I like the more 4x4 content, on the Starter Gauge wires, if a guys funds are low, we all been there, I'll buy Red n Black cheap Jumper Cables from yard or garage sale, cheap sets I've bought Several sets for $5 -$15 bucks, there Heavy duty gauge wire,the older greasy n brown sets of jumper Cables can be bought cheaper than a cleaner set, because there brown n dirty as a old Baby diaper.lol 😅😅, just cut ✂️ the ends ,On TEMU u can buy Terminal ends cheap., for the Crimp, my grandfather 👴 showed me years ago, a guy can use Bolt Cutters, to cut the cables n crimp the terminals on to the heavy Guage wire,theres flat Spots. To crimp, Together, on the bolt Cutters, Jason B, Wichita ks.

[@MortskeRepair]

Right on

[@rickeyhecht1919]

Mortske s knowledge an humor make for great content hope he has a video on the cougar in the background in the future one of my favorite cars Happy Thanksgiving

[@MortskeRepair]

Maybe one day!

[@kevbev1524]

We had one of these for firewood fetchin in VT in the late 70s early 80s. Sweet memories of deer huntin

[@waltdenis9621]

Always entertaining and informative!

[@MortskeRepair]

Glad you think so!

[@ryanmccoy1612]

Happy thanksgiving to you, Duff, and the rest of the gang. Another one hopefully saved from the junkyard

[@MortskeRepair]

Same to you!

[@karld34]

Mortske and Duff on monday yes.

[@randysoper9575]

That vise is awesome. Worth a lot.

[@MortskeRepair]

I think so too!

[@brentkingnwagent1347]

Good job Mortske.

[@MortskeRepair]

Thanks

[@dalehartley-vd9qo]

Good job Mortske that old truck was running pretty good when you got done working on it thanks for the video

[@MortskeRepair]

Thanks 👍

[@JohnBurdette-or7if]

Call truck cool I like those body styles Happy Thanksgiving to you and yours and don’t forget Duff

[@MortskeRepair]

Thanks! You too!

[@Jason1975ism]

Happy Thanksgiving to you and the crew!!

[@MortskeRepair]

Same to you!

[@goofyfootprojects]

Hey Mortske... That hatchet looks like a Tomahawk to me. Great Episode! Thanks for all the knowledge you continue to share with us.

[@MortskeRepair]

You bet!

[@after5auto133]

I’ve used a piece of flat steel and bent it into a 90 . And drilled a couple holes in it for my starter wire. Works great

[@waltalbright]

Enjoyed the picture show

[@joelkarch3538]

happy turkey day to you and yours!!! love you and your show!!not to mention your entire crew....and then thers duff!! give him a turkey leg to munch on!!! you have alot to be thankful for!!! peace and love from cincinnati ohio.happy holidays all!!!

[@MortskeRepair]

Same to you

[@joelkarch3538]

@@MortskeRepair thanks man!!

[@FreedomRock44]

Awwwwwwww Mortske.........A FANTASTIC PAINT COMBO!!!!!!

[@stevechilders2624]

Great video as always. The only reason to look forward to Monday!😎🇺🇸

[@MortskeRepair]

Thanks 👍

[@johncarella1836]

Love the give-a-way!!! 😂 Happy Holidays Everyone!

[@MortskeRepair]

Same to you!

[@Fattboy79]

Great video this week can’t wait to see what you work on next god bless you and your family

[@MortskeRepair]

Thanks 👍

[@rafaelvazquez4875]

Hey Sir as usual a good quality video. Love those pickups my grandfather has a 1970 gmc step side short bed. Greetings from PR.

[@MortskeRepair]

Right on

[@jwfinley7808]

Best looking Chevy Pickup made!

[@MortskeRepair]

No doubt!

[@ksokie63]

Hey Mortske 👋, thanks for sharing. It definitely will need lots of love. But it did run and drive. 👍

[@MortskeRepair]

Thanks for watching!

[@CharleB-sabres]

I went home for lunch break to watch this with my dog Remington…his favorite caliber is ..22-250 Remington brand

[@MortskeRepair]

Nice

[@geraldgreene6617]

I have completed my summer project.

[@Profabdesigns]

Another simply awesome video Sir! That truck would sell in 2 minutes flat in OKLAHOMA! Hope you have a wonderful weekend and thanksgiving with your family too. 🎉 Just remember, only 28 days left shoppers!! 😂😂

[@MortskeRepair]

Thanks! You too!

[@glenharper3136]

Thanks for the video Guys!

[@MortskeRepair]

Our pleasure!