Sawing 20' LONG 6x6's on the Antique Sawmill!

Like the title says, in this video you will get to join along as we saw out some really long timbers for a barn restoration! #sawmill #woodmizer #sawmillbusiness

[@CelticWa4rior]

You are a great team. Hard work always pays off, clean without corrupt bs making life hard. Thank you for that.😊

[@clarenceburton9654]

I like it all !!!

[@12ar34sw]

It’s always fun to watch you too. Thanks for the video.

[@charleswills7695]

Got to make a living regardless what the wood order is. I try to watch your show and catch all the new up to date. I like the show you guy's put on It's Great in my thoughts.👍

[@user-kf9fv1qj9u]

Great video Tyler and Brittany

[@user-xn4ce5ip9s]

Great job Britney love I love watching your videos,keep up the great work and videos xxxx

[@wallacefarmandsawmill]

Thank you! Will do!

[@petermcfarlane7405]

Great job Tyler and Britney,really enjoyed your video and your laid back attitude it really is great to see once again thank you so much;cheers for now,please take care folks. Peter McFarlane Adelaide Australia xxxxx

[@wallacefarmandsawmill]

Glad you enjoyed it

[@jimmyfishburn7894]

Look at the Subscribers and tell me that we are not interested in what you are doing. You not only have a group of people who like to watch what you do, but you have a production company, Brit runs Pateron and your lives are an open book. Making a living out of what you love. Not bad guys, not bad at all. Keep it up.

[@wallacefarmandsawmill]

Thanks!

[@johnsadler8637]

Good morning! Cool old-school sawmill. Reminds me of the mill a Sawyer who set up on our place when I was in my early teens had. All those levers, dogs, and catches. Yeah, there’s a reason most boards are 8’ or 10’. Only one of them is the purpose! Cool video, team.

[@stephencoster9532]

Hiya to you both, and thank you for a great fun video. Fun? 20 ft finished piece? Fun. The look on Britney's face as she said she was leaving? That said it all. Stay safe, Steve...

[@wallacefarmandsawmill]

Thanks for watching!

[@bobgallahan9663]

I enjoy the smorgasbord of your videos, mixing it up is nice. Thank you for sharing.

[@wallacefarmandsawmill]

Glad you like them!

[@robertlusnia506]

Enjoyed the video like to see more

[@wallacefarmandsawmill]

Glad you enjoyed, more to come!

[@robintaylor-mockingeemill8223]

Your off bearer is a trooper , you should keep her .

[@wallacefarmandsawmill]

Been here 16 years might as well keep her a few more!

[@robintaylor-mockingeemill8223]

@@wallacefarmandsawmill I would

[@antonlords6]

You guys are great. I need your input on something. If you had to mill 120 logs into either 8x8x12 D-logs or 6x10x12 beams would you use a horizontal bandsaw mill or a circular blade sawmill? Thanks your input is greatly appreciated

[@DWHut]

do more of the fishing trips.🤗

[@wallacefarmandsawmill]

More to come!

[@rudolfhild]

Finde eure Arbeit sehr gut Grüße aus Germany

[@wallacefarmandsawmill]

Thanks for watching!

[@rudolfhild]

Super Arbeit von euch Grüsse aus Germany 👍

[@MRBoatwrights]

I enjoy cutting 20' post and beams on my lt40 but all the flitches and lumber I cut into 8' and 12' as I take it off mill. Then I just take the fork lift and pick the beam up and put in the. I charge more for anything over 16' so it adds up quicker but it is definitely not easier.

[@MySORRELL]

THANKS!

[@wallacefarmandsawmill]

You're welcome!

[@heyyoubuddy6749]

Hey buddy how are ya? Oh ya that fella doesn’t know what he’s talking about! I cut some 6x8s by 16. That was no fun way too heavy!!! Love your channel god bless y’all!!

[@wallacefarmandsawmill]

Long and heavy! Thanks for watching!

[@fricknjeep]

hi there good sawing , the longest i sawed on the old mill was 24 -25 , the new mill can do a 40 . take care john

[@wallacefarmandsawmill]

Your new mill is a absolute beast! I want one like it!

[@larrysloskysr5503]

MORE WORK. MORE $$$$

[@Sukru-sy8vq]

Keyifle.seyrediyorum.👍❤👍❤👍

[@larryhunt8447]

Well you better leave him if he's going to start lying haha

[@RUDOLF1929]

Отлично молодёж👍🙂✅ реально балдёж 👍🙂

[@user-tg6fd3sn3x]

The maximum i can mill is 18 foot. But I don't like milling anything over 12 foot

[@FeatherHorseforge]

Wish I could find a small circle mill near me but most of these type of mills are long gone and/or scraped

[@wallacefarmandsawmill]

Few around. Most wore slap out.

[@jamiewynn9303]

16ft green lumber is heavy

[@wallacefarmandsawmill]

You are right about that!

[@jamiewynn9303]

I've worked in a sawmill and I hauled flatbed and green lumber with Sapp is no joke

[@cliffordarnoldussen]

I can’t it sounds like the guy wants bought firewood from me and I cut my firewood at 16 inches and he said well I want it for 2 foot for the same price. I asked him if he could go buy a 2 x 10 for the same price as a 2 x 8

[@dwaynefowler7093]

HEY TY CAN YOU CUT SOM 10X1030FTLONG POST ON THE WOOD MMIZER????????????????

[@jacksanders7018]

Need help to cut much of that, thanks for sharing.

[@wallacefarmandsawmill]

You bet

[@jbbrown7907]

I likebten foot six.

[@wallacefarmandsawmill]

That’s the best ones!

[@rickutley931]

Question , why do you keep changing set pin? Rather then pulling once for one inch or twice for two inch , ect.

[@wallacefarmandsawmill]

Those pins are set to add the kerf. If you pull 2x you wouldn’t get 2” you would get 2 1/2”

[@ParadiseLandscapingGA]

Nice work 👍🏼 how many board foot can y’all make a week ?

[@wallacefarmandsawmill]

Usually 5-10k

[@ParadiseLandscapingGA]

@@wallacefarmandsawmill that’s awesome 👍🏼

[@user-kf9fv1qj9u]

Sorry if I spelled your name wrong to your wife Tyler

[@wallacefarmandsawmill]

That’s correct way!

[@cedricgates9976]

dont think he really thought about what he was saying!! or he never handled much wood

[@Sukru-sy8vq]

Eşinizmi.berabermi.çalışıyorsunuz.

[@billyshumate853]

Britney doesn't look to happy with it 🙄🙄

[@N8er118]

Too

[@bobbybjornstad201]

Wear ear protection

[@sharpe67]

She’s wearing shorts! and sneakers! Not smart

[@Rickimusic]

Don't point, very rude.

[@pepper77449]

You are lying. No touble.

[@ddolde]

You could saw your arm clean off with that blade