SB-00088 Radiator Mounting Change

[@jetset44]

Another great video, Rob! I just completed this SB a few days ago, but I'm sure glad I watched this video as I learned two important things: 1) I didn't notice the light contact between the cut edge on the radiator to the mounting lugs of the oil cooler. Mine mostly clears, but there was one spot that was in contact so I'll need to take the radiator back off and file it down. There is no coolant in mine yet so that won't be too much work. 2) I didn't cut the rubber isolators since I couldn't see the need, but I think you brought up a great point about expanding the isolator to fill the hole better. So I'll go ahead and make that change while the radiator is off, as well. Thanks for sharing your experience! FYI, I also recently followed your advice and video to upgrade the CPU fans, so thanks for that, too.

[@ronmort]

Nicely done video. I have no radiators but still fun to watch.

[@matthewmyers9745]

What does the SB accomplish. Does it move the bottom of the radiator aft? Mine touches on the outboard lower corners like shown in the SB . I hope it relocated the radiator more aft. I can’t trim anything on the cowl where mine touches. At 39 seconds in mine touches the lower corner of the tank.

[@rcarsey]

It does not move it. It only prevents vibration and prolongs the life of it.