SC6000 Demo for light packaging (NTSW)

Рет қаралды 51,358

SC5000

Күн бұрын

Пікірлер: 30

@spamrme1654 9 ай бұрын

3:24 I think there is a high chance already cut section when rolled back in, get jammed and will halt print job.

@SC-pr1eo Ай бұрын

True, that's why the cutter software provides 3 solutions to reduce or eliminate this. 1. The Cutter, when it has finished creasing will start back at the top of the sheet cutting the elements, down the sheet, so each cut element stays outside the cutter. 2. IF the above is not relevant due to your design, It provides a SMART TAGS option, which automatically adds 'bridges' in the cut line to hold the elements in the sheet (when enabled), this totally prevents the elements falling out during cutting. But does mean you then need to pop the elements out one the sheet is ejected. 3. The cutter is provided with a TRP (Tag reduction Plate), an attachable plate that shifts the angle of the sheet to reduce the need for tags.

@spamrme1654 Ай бұрын

@@SC-pr1eo That's good to know. Seems like they have anticipated this situation and have solutions in place.

@jovilu8703 3 ай бұрын

what was the brand and serial of the printer at the beginning?

@onlinesignsanddisplays3484 10 ай бұрын

Good only for ultra short runs (50pcs or less). Therefore, only good for producing samples/prototypes.

@SuperMatt2112 9 ай бұрын

Thats probably why the description says 'Light Jobs' it's fairly obvious

@onlinesignsanddisplays3484 9 ай бұрын

@@SuperMatt2112 it said light packaging. Meaning thin paperboard substrates.

@studentu05 8 ай бұрын

It can do 100-200 at a time I believe. Card used is around 350gsm.

@DerFotomann 10 ай бұрын

Promising at first. But 0.35mm max. thickness isn't enough. Even our 240gsm GC1 paper is at 0.41mm thickness. We thought about buying the SC6000 but now rather go for a flatbed cutter.

@ferrahi-kaya 10 ай бұрын

What model of flatbed cutter are you using?

@DerFotomann 10 ай бұрын

@@ferrahi-kaya We're going for a Vulcan FC500 now. Sadly no auto sheet feeding but seems to be a fast machine. Originally we considered a Intec FB8000. But Intec decided to not to continue this machine. Instead they replaced it with the larger and much more expensive FB9000.

@SC-pr1eo Ай бұрын

The SC7000 is same footprint but different head..and motors..it uses Tangential Creasing, and 4x more pressure.. its good for up to 450g/450micron.

@marcob7169 Ай бұрын

Quanto costa il mod.SC7000?

@79idan 10 ай бұрын

What is the price please?

@rwegabarogers8200 Жыл бұрын

how about colored paper not printed like ivory black, how does it cut

@SC-pr1eo Жыл бұрын

Yes, the camera will be inverted for white marks on Black paper. This gives normal (very) high accuracy. Or. You can use media edge detection. For no marks (if you can not add white marks). But this is less accurate, as the position of image on the sheet may vary depending on your printer

@sherzoddjonqudratov9772 8 күн бұрын

In the machine doesn’t work test mode, who can help ????

@SC-pr1eo 5 күн бұрын

Please update the firmware. This solves the issue. Contact your dealer, or the UK support office to assist. If you can't do it, they will connect remotely if you provide them access, then they can do it for you.