Ta 152H-1 Trimaster/Dragon 1/48 Scale Model Aircraft

  Рет қаралды 88,418

Scale-a-ton

Scale-a-ton

Күн бұрын

In this video I build Ta 152H-1 Trimaster/Dragon 1/48 Scale Model Aircraft in 1/48 scale.
In my country, modeling materials and equipment are getting harder and more expensive day by day. Thank you for all your support.
Support on KZbin:
/ @scaleaton
Support on Patreon
/ scaleaton
Facebook
/ scaleatonscalemodeling
Follow me on Instagram!
/ scale.a.ton

Пікірлер: 157
@Scaleaton
@Scaleaton 2 жыл бұрын
Happy New Year to you all guys! I hope and wish the New Year will be better than the last two years for everyone. Stay safe, keep modeling!
@thegermanfool8953
@thegermanfool8953 2 жыл бұрын
:D
@AlexModeling
@AlexModeling 2 жыл бұрын
Happy New year my friend! Inspiring work as always!! 👍👍 Greetings from Portugal!!
@aidi58
@aidi58 2 жыл бұрын
Happy New Year from Malaysia! Keep up the good work.
@hubristicmystic
@hubristicmystic 2 жыл бұрын
Beautiful work. FW190 certainly wasn’t Winning any beauty contests. There were a few flashes of the broken cross in there from 13 min to 16 min, hope that doesn’t upset the YT algorithm.
@jessejones640
@jessejones640 2 жыл бұрын
Happy New Year from the U.S.
@danielbrandao3166
@danielbrandao3166 2 жыл бұрын
Worst part of the video: “well, thanks for watching this episode!” … stunning work Rahmi … thank you for your effort to bring good content to us! You are the best
@Scaleaton
@Scaleaton 2 жыл бұрын
Thank you so much Daniel!
@jimmccormick6091
@jimmccormick6091 2 жыл бұрын
Back when these kits came out, they ALWAYS sold out immediately. The story was that Tri-Master was 3 Hasegawa employees who wanted to go out on their own. The kits were light years ahead on anything else mass produced. The plastic was great, the engraving was always fantastic, the p/e was well thought out, and workable, and the white metal (usually landing gear and exhaust stacks) was okayish (I always stuck to the plastic). The ONLY kit that I ever saw that had resin was the TA-152C, and, it was a last ditch effort. The wings were cast in resin. Mine were horrible- short shot, with huge holes, and warped to hell. BUT, that was the only kit that wasn't a home run. Some people say the 152 H is a fiddly, difficult model. It may well be in the re-box, In the tri-master boxing, it was a great build, as long as you stuck to the instructions. You have done a great job on yours! Thank you for sharing! If you look closely, look at where the cockpit is, in relation to the wings. The DB-603 was a HUGE engine, and pushed the cockpit WAAAY back! It must have been a special challenge to get in and out of that plane, especially with a full parachute and other high altitude gear!
@rongray8416
@rongray8416 2 жыл бұрын
Actually the real plane the cockpit is in its standard place for a FW-190...the wings are new and longer the nose is stretched longer from the firewall forward and the fuselage was stretched by I think it was 10 to 14 inches between the cockpit and tail (bout the same spot you see a lot of people painting the white stripe on the body)... Kurt tank pretty much built the best version of all the FW 190s but it was expensive and so you see the Dora 9 (Dora was were they found stability issues at high altitude and made the fuselage longer) version more while very similar didn't have all the advanced features of the TA 152 Hope this bit of info helps
@PeteCourtier
@PeteCourtier Жыл бұрын
I thought the TA-152 used a Jumo-213.
@Desertduleler_88
@Desertduleler_88 3 ай бұрын
Cockpit wasn't pushed back, the nose and rear fuselage got longer.
@jamesw5713
@jamesw5713 Жыл бұрын
I used to make model planes as a teen back in the 1990s, used to hate painting, used to slop it on thick with a brush lol. Randomly started watching model KZbin channels recently and am blown away by the painting of the models, the airbrush, the techniques etc, pure art. Makes me want to take up the hobby again.
@Eigil_Skovgaard
@Eigil_Skovgaard 2 жыл бұрын
Nice model. Don't be afraid of showing the sun-wheel. It's an essential part of the history.
@pauka13
@pauka13 2 жыл бұрын
Superb finish! Dragon kits were our holy grails back in the 90's
@iaidagger8278
@iaidagger8278 9 ай бұрын
+1!!!😊😊
@pauljohnson8302
@pauljohnson8302 2 жыл бұрын
I don't think I've ever seen such a steady, accurate pair of hands ... you make it look much easier than I'm sure it is for us mere mortals!
@michaelforsythe4335
@michaelforsythe4335 Жыл бұрын
Your airbrush work is insane !
@ikezutabunkyowa4628
@ikezutabunkyowa4628 2 жыл бұрын
I built this some years ago - I actually left part of the hood open since the engine provided is nice. I’m not a brilliant modeler, but it came out nice and was a lot of fun. A beautiful aircraft.
@GeoffWeatherall
@GeoffWeatherall 2 жыл бұрын
Great to see what can be done with an older kit.
@Shaun1440
@Shaun1440 Жыл бұрын
This man is a pro. Excellent job.
@freemanreed5228
@freemanreed5228 9 ай бұрын
I have an original Trimaster kit from 1989. I think it's outstanding for it's day. The engine is superb. One day I will build it. Great show and great content!!!!!
@peterforsberg619
@peterforsberg619 2 жыл бұрын
Stunning work as always. Your airbrushing is just phenomenal and such an inspiration to us mere mortals :) Keep on modelling!
@americanpatriot2422
@americanpatriot2422 2 жыл бұрын
Outstanding video and presentation.
@cjcollado8071
@cjcollado8071 2 жыл бұрын
*I like how there's just a Leonardo DiCaprio edit to cover up the Swastika* _Amazing Work Scale-a-Ton! I hope to see more of your Work, even if I have to wait Months_
@silverdragontm9548
@silverdragontm9548 2 жыл бұрын
As usual, a beautiful model! I love that you work „safety first“!
@RaduB.
@RaduB. 2 жыл бұрын
Hello Rahmi! This was a nice surprise! I was expecting a 1:72nd kit... 🙂 This high altitude fighter has always intrigued me with its slender, almost fragile appearance... The late Luftwaffe camouflage is pretty challenging and I think you managed to get a good result! Happy New Year and a better one to you too!
@Scaleaton
@Scaleaton 2 жыл бұрын
Thank you for your kind wishes Radu!
@TheNorbica
@TheNorbica 2 жыл бұрын
OMG Rahmi! Literally you are keep building the same kits that on my stash as well! Amazing work, congratulations!
@mikemodels928
@mikemodels928 2 жыл бұрын
That preshading is a masterwork.
@billbrowning3021
@billbrowning3021 2 жыл бұрын
I love the Wulf in any form and German camo is always a challenge. As always, a masterful job. Thanks for the wonderful content in 2021.
@kalenikad
@kalenikad 2 жыл бұрын
Thanks for the great work in 2021. You help develop hobby skills. Happy New Year and I hope that in the coming year you will delight us with new works!
@MAN394631
@MAN394631 2 жыл бұрын
Absolutely great work, i love the worn effects much.
@drumperson10
@drumperson10 2 жыл бұрын
Glad to see Leo get featured lol
@mako2350
@mako2350 2 жыл бұрын
I LOVED this kit, it was a joy to build. I just got into the hobby when Tri-Master went out of business, sad day IMO. The FW-190-D9 was also a great kit!!!
@michaelnaven213
@michaelnaven213 2 жыл бұрын
Have a healthy and plentiful New Year!
@breaktherule758
@breaktherule758 14 күн бұрын
absolute masterpiece, congratulations, enhorabuena!!!
@OzScalemodeling
@OzScalemodeling 2 жыл бұрын
Once again another stunning model, Happy New Year to you and looking forward to whatever content you produce in 2022 🎉🎉👍
@gb373886
@gb373886 2 жыл бұрын
Excellent build...I love the techniques!
@bibimunozlosa3060
@bibimunozlosa3060 2 жыл бұрын
Saludos desde Mallorca. Feliz Navidad.🎄🍺👍
@Its_Me_Romano
@Its_Me_Romano 2 жыл бұрын
Lmao the little Leonardo to hide the swastika was hilarious
@karlheinzvonkroemann2217
@karlheinzvonkroemann2217 3 ай бұрын
It's actually quite pathetic!
@EPTJ01
@EPTJ01 Жыл бұрын
how beautiful was that plane 👏👏👏👏👏👏👏
@timranachan3224
@timranachan3224 2 жыл бұрын
A fantastic build of one of my top-five favourite aircraft. Well done sir, and happy New Year when it comes. Liking the choice of music too.
@adbd2300
@adbd2300 Жыл бұрын
Excelente trabajo!!!!!, pero el hilo de la antena debería estar estirado y tenso, no flojo.
@dongorski4822
@dongorski4822 2 жыл бұрын
Brilliant airbrush work! Happy new year from NZ!
@pandaphil
@pandaphil 2 жыл бұрын
One of my first serious builds from the early 90's.
@bobdyer422
@bobdyer422 2 жыл бұрын
I've got 2 of the Tri masters 1 - Later issued Ta, and a brown boxed {yes that early} still in the wrapper 190"D". The white metal is quite nice, and for a kit of that age the detail is very good. But once they became Dragon kits, I stayed away. Very nice build/paint & detail work. Congrats
@mrgesso934
@mrgesso934 2 жыл бұрын
Absolutely amazing build, one of my favourite looking ww2 fighters.🙂👍🏻
@Greywolf1066
@Greywolf1066 2 жыл бұрын
A cracking build! Built a few Dragon kits in my time,I’ve still got a TA 154 in my stash. Incidentally comparable kits were the SF3D sci-fi kits,which were some of the first multi media kits to come out.
@SprueFascinationChannel
@SprueFascinationChannel 2 жыл бұрын
Excellent result 👍
@waynedaly1718
@waynedaly1718 2 жыл бұрын
Absolutely gorgeous. Well done indeed. Happy New Year from Australia.
@nateg6320
@nateg6320 2 жыл бұрын
Finding Leonardo DiCaprio was like, a where’s Waldo book lol.
@richardbreisch8049
@richardbreisch8049 2 жыл бұрын
Beautiful work! Cool subject for sure. I must say while watching the antenna cable installation the cable was aloud to sag because of the canopy being open. Actually the cable goes through the canopy and is kept taught on a reel mechanism to take up the slack when opening the canopy...
@Scaleaton
@Scaleaton 2 жыл бұрын
Thanks for the feedback. Semi blown canopies doesn't have that mechanism.
@richardbreisch8049
@richardbreisch8049 2 жыл бұрын
@@Scaleaton Wow, I miss spoke, you are right! Thank you for answering my post and educating me... Salute!
@ModeliteDiorama
@ModeliteDiorama 2 жыл бұрын
This Looks great! I love the patently made Pattern on the whole plane! And I wish you a happy new year! You inspire me much ☺️ and thank you for showing what string you used in the ending ☺️
@GhostRider247
@GhostRider247 4 ай бұрын
my god man your work is always amazing !!!!!!!!!!!!!!!
@rongray8416
@rongray8416 2 жыл бұрын
Pro tip paint at least the bottom and back sides of the engine since it is exposed (Its even this way on the real aircraft so still accurate for the rivet counters lol) Dora 9 included... It was considered a production cost and weight saving issue so deemed unnecessary to fully enclose the engine from the gear bay
@markusv311
@markusv311 2 жыл бұрын
Very nice and interessting build. Thanks for sharing this. And a Happy and healthy new year🎉
@basfinnis
@basfinnis 2 жыл бұрын
Lovely finish. Who's that on the tailplane? 😜
@CetoFreakingKaiba
@CetoFreakingKaiba 2 жыл бұрын
Amazing build! Such a beautiful and unique aircraft so rarely seen. I would recommend annealing the PE belts for the pilots seat, it makes them much more malleable and you can form them into more interesting shapes
@thomassinbruno2612
@thomassinbruno2612 2 жыл бұрын
nice!!! best fight plane of the WWII
@thethirdman225
@thethirdman225 2 ай бұрын
Technically interesting. Achieved basically nothing.
@michaelhintzmikesminiature1812
@michaelhintzmikesminiature1812 2 жыл бұрын
You did an Awesome job on this build!!!!! Fantastic Work!!!!! Happy New Year to you and yours!!!!
@nowar-is7qb
@nowar-is7qb 2 жыл бұрын
Merci pour cette video, vous me donnez l'envie de reprendre ma maquette trimaster de cet avion que j'avais commencé il y a quelques dizaines d'années.
@ScaleMilitaryModels
@ScaleMilitaryModels 2 жыл бұрын
Great work on this one! Looks amazing, definitely one of my favorities
@jimpuff8409
@jimpuff8409 2 жыл бұрын
Beautiful job that you did! It is great workmanship and perfection at its best 😊👍
@NapFloridian
@NapFloridian 2 жыл бұрын
Very pleasing to the eye your work
@AlexModeling
@AlexModeling 2 жыл бұрын
Very inspiring work as ALWAYS!!
@carzenriq
@carzenriq 2 жыл бұрын
Wonderful work, thanks for sharing
@ClioManBacc
@ClioManBacc 2 жыл бұрын
Great job 👏
@dwightlooi
@dwightlooi 2 жыл бұрын
Brings back old memories... I built one of the original black sided box Tri-master Ta152H-1 kits in 1989 or was it 1990... "MA-9" I think was the SKU. It was not an easy kit to build. There were plenty of details, yes, but a lot if stuff didn't fit very well and gluing thin etched metal parts to plastic was also tricky. I didn't have an airbrush back then, so painting was a chore. I super diluted the acrylic paints and went with about 5 or 6 criss crossing coats of very thin matte paint so there weren't any brush marks. A semi-gloss finish was achieved by buffing the matte paint rather than painting with gloss or semi-gloss paint. This was done before washing for the panel lines and rivet holes. It took about 4 months to finish.
@EAbc-bt6em
@EAbc-bt6em 2 жыл бұрын
That's quite interesting because I got a Revell fw ta 152 in 1/72 at christmas. Your aircraft looks way better tho because mine has no weathering and was painted with brush only.
@foreverplastickits138
@foreverplastickits138 2 жыл бұрын
*Amazing result, i think i have this kit somewhere waiting for a build ... 😉👏👏*
@fabiosilva3799
@fabiosilva3799 2 жыл бұрын
Very good! Please,1/48 Kinetic Mirage IIIE
@ryburnsjr
@ryburnsjr 2 жыл бұрын
Georgous. Just georgous.. 😀😀😀😀😀
@mauserkk98
@mauserkk98 2 жыл бұрын
Another quality one, have a great new year.
@Rpantherluzero
@Rpantherluzero Жыл бұрын
It was beautiful work, but I have questions, such as why you filled the side fuselage. The painting of the engine, the antenna, and even the sealing of the decals. It may sound nit-picky, but I want you to know what you did. Nice model 🎉
@weekendmodeller2740
@weekendmodeller2740 2 жыл бұрын
Lovely build, I think some of the Dragon kits were released under the Italeri label also.
@DanielZerem
@DanielZerem 2 жыл бұрын
Great job! Few questions as I use the same paint and airbrush: 1) What is the needle size in that Evo brush at 11:27? 2) What do you use to thin the paint for the work done at 11:27? 3) Roughly the pressure used for the work done at 11:27? Thank you!
@Scaleaton
@Scaleaton 2 жыл бұрын
1. It's 0.2mm 2. I use a local brand alcohol based surface cleaner for all acrylics expect X-22. 3. According to my air compressor's dials it's about 3-5 PSI
@DanielZerem
@DanielZerem 2 жыл бұрын
@@Scaleaton thank you for the reply. I really love your technique and I am amazed at your level of control of the AB. If I was casually spraying those exhausts like you do I would end up with the paint around it as well.🤪
@modkitmayhem
@modkitmayhem 2 жыл бұрын
Really nice build and paint job 👍 Happy New Year 😀
@christopherchurch223
@christopherchurch223 2 жыл бұрын
Very well done. Thanks for posting.
@konradsiewiera1577
@konradsiewiera1577 2 жыл бұрын
Happy New Year..😀
@danwilliams1686
@danwilliams1686 2 жыл бұрын
Very nice! I have a hobbboss TA-152 in the attic it looks like it maybe a little easier to build.
@vincenzomor1964
@vincenzomor1964 2 жыл бұрын
Beautiful work!! Happy New Year to You....!
@shadowqueenskye5415
@shadowqueenskye5415 2 жыл бұрын
New subscriber! I love all the tiny details!
@ahmedalsadik
@ahmedalsadik 2 жыл бұрын
I think the radio antenna should be straight, it had a tension device inside the moving canopy.
@vlajkot6563
@vlajkot6563 5 ай бұрын
Thanks
@markfergerson2145
@markfergerson2145 2 жыл бұрын
Same for modeling stuff here in the USA- nobody is immune from Supply Chain Hell. Looks like 3D printing is maturing just in time. Well, assuming you stocked up on resin/filament...
@markdeyanov5092
@markdeyanov5092 3 ай бұрын
Nice job! I have 3 questions: First, on what pressure are you painting? Second, how thin are paints? Third, what is the sise of the needle of your airbrush?
@oranje1964
@oranje1964 2 жыл бұрын
As always, amazing...!! Happy new year..!!
@jerryhawk8434
@jerryhawk8434 2 жыл бұрын
Stunningly beautiful lv it awesome job
@MGB-learning
@MGB-learning 2 жыл бұрын
Great video!
@JWinger62
@JWinger62 2 жыл бұрын
I am quite new to videos like this. When it says "ratio in the mix" for which ever colour he is using at the top. What is mixed in with the paint? A thinner of some sort perhaps?
@CasualClinkz
@CasualClinkz 2 жыл бұрын
Loving this build but I think the wings should have a stronger blue tone but otherwise perfect
@jmirsp4z
@jmirsp4z 2 жыл бұрын
oh yes.. my favorite prop plane.. the slenderjesus
@lieschenmultikill5038
@lieschenmultikill5038 2 жыл бұрын
Fantastic!
@ianvaughan9028
@ianvaughan9028 2 жыл бұрын
Superb build Sir!
@tomcline5631
@tomcline5631 2 жыл бұрын
Strange looking aircraft. Never seen one before.
@nadrazakcz7858
@nadrazakcz7858 2 жыл бұрын
Hello mate, very nice build and technique showcase...not sure about that undercarriage color, but I am really missing brake hoses for wheels... Anyway, thanks for this video, I wish you too all the best in New Year 2022 :-)
@MeBallerman
@MeBallerman 2 жыл бұрын
Very nice Focke-Wulf there... One question: Why did you use modified needles for wing mounted cannons? Weren't the cannons included in the kit?
@baltazargabka_
@baltazargabka_ 2 жыл бұрын
Model looks great. I like that finish style. Reminds me models by Chris Wauchop, who is my favourite airplane modeler. Btw. could You tell me what camera You use for recording and pictures?
@THROTTLEPOWER
@THROTTLEPOWER 2 жыл бұрын
Great vid!!!
@Alex__S
@Alex__S 2 жыл бұрын
Very nice build! Is it just me or is the left wing still drooping down. In any case, keep up the good work! Wish you and your family a very fine and healthy new year!
@Scaleaton
@Scaleaton 2 жыл бұрын
Yes, I realized later, the landing gear is not fully seated. Thanks for the feedback.
@ACCollection
@ACCollection 2 жыл бұрын
Cool one!
@kylehood1657
@kylehood1657 2 жыл бұрын
Looks fantastic!
@michaelnaven213
@michaelnaven213 2 жыл бұрын
Nicely done!
@conwayplays6610
@conwayplays6610 2 жыл бұрын
Damn, I’m currently building an Italeri Ta-152 H and let’s just say it probably won’t turn out like yours
@davidsakal449
@davidsakal449 2 жыл бұрын
It's the same kit.
@grantmiller6570
@grantmiller6570 2 жыл бұрын
A beauty.
@tasketehimesama
@tasketehimesama 2 жыл бұрын
Simply amazing
@MrDino1953
@MrDino1953 2 жыл бұрын
The size of that propeller!
@wasrio1403
@wasrio1403 2 жыл бұрын
great build, what do you use to dilute Mr Hobby Aqueous?
@gotharion
@gotharion 7 ай бұрын
Great job. I'm working on the same kit right now. Could you tell me what air pressure you used when applying the "dust" effect?
@Scaleaton
@Scaleaton 7 ай бұрын
Thanks for the feedback. I can not remember well but generaly I use 10 PSI so posibly it's 10 PSI
@JedenSiedemDwa
@JedenSiedemDwa 2 жыл бұрын
So great done. Looks very good! ;) All the best for You! ;)
Building The Hasegawa JU 87-B2 Stuka Scale Model Aircraft
27:26
Scale-a-ton
Рет қаралды 207 М.
Monogram and Trumpeter 1/48 Scale C-47 Dual Build Part 1 | Full Build Series
38:11
Hammerhead Model Making
Рет қаралды 18 М.
小路飞嫁祸姐姐搞破坏 #路飞#海贼王
00:45
路飞与唐舞桐
Рет қаралды 26 МЛН
Good teacher wows kids with practical examples #shorts
00:32
I migliori trucchetti di Fabiosa
Рет қаралды 9 МЛН
إخفاء الطعام سرًا تحت الطاولة للتناول لاحقًا 😏🍽️
00:28
حرف إبداعية للمنزل في 5 دقائق
Рет қаралды 53 МЛН
High Hopes | Focke-Wulf Ta 152H
14:29
Plane Encyclopedia
Рет қаралды 176 М.
A3D Skywarrior 1/48 scale | Full build video
19:15
Scale Hangar 182
Рет қаралды 19 М.
Focke Wulf Fw-190 D-9 Hasegawa 1/32 - Aircraft Model
26:41
PLASMO - plastic models
Рет қаралды 1,7 МЛН
1964 Airfix Short Sunderland 1/72 - FULL BUILD
34:30
Mr. Plamo
Рет қаралды 96 М.
Tamiya 1/48 Messerschmitt Me-262 - Scale model aircraft kit 61087
43:21
Scale Model Shed
Рет қаралды 131 М.
Tamiya's 1/48 P-38J Lightning | Full Build | 4K
24:30
Mach Models
Рет қаралды 23 М.
A-6A Intruder - 1/48 Hobby Boss Full Build
39:26
My Plastic Projects
Рет қаралды 60 М.
Сделал подарок на день рождения дочки!
0:39
Интересные факты
Рет қаралды 2,2 МЛН
Это просто какое то чудо...
0:21
MovieLuvsky
Рет қаралды 3,7 МЛН
Gutted the pillow and showed to the children by Tsuriki Show
0:11
Tsuriki Show
Рет қаралды 1,8 МЛН