A3D Skywarrior 1/48 scale | Full build video

[@joemoore4027]

We had A3D's on the USS Constellation in the early 70's. It was one aircraft you stayed away from when landing or take off. Landing was more of a controlled crash. We had one hit the deck so hard it drove the nose gear through the fuselage, It was later scrapped. Very clean build on a kit not covered very much on video's ! Great building skills that are fun to watch !

[@ScaleHangar182]

Thank you very much. Thanks for the story I really love them. There's an older video on my channel (from 2017 or 2018 I think) where I build F-4 from USS Constellation - Showtime 100). I would like to build it again at some point.

[@Bob-b7x6v]

You should start a modeling studio with Jamie Haggo and Phil Flory. You'd be the Cream of British modelers.

[@MARK-wh5bp]

The music and the editing while you're painting feels like I'm watching an 80s movie montage. I love it

[@SMAZVidoes]

Great work on this kit. I don’t recall seeing a Sky warrior being built on KZbin. Thanks for choosing this subject.

[@Poopster4U]

This is in my stash and getting close to the bench. I'm glad I waited for 182 to show me the way on this kit.

[@JuanitosGG]

This looks awesome, I have no words to describe how good it looks.

[@Blitz9H]

Very nice!!!! Whale in the groove my Dad used to say.

[@leesouter9627]

That was just a lovely build.

[@krugmeister7301]

That's A AWESOME MODEL BUILD!! ..I sure miss BUILDING MODELS...😪💯😑😑🥰🥰😪

[@georgem4713]

Really nice build, job well done. The A-3 is a big boy ! Thanks for posting.

[@ScaleHangar182]

@@georgem4713 thanks!

[@scalemodelingltd]

Awesome build pal keep up the good work. Hopefully see much More aircraft builds in the future. ❤

[@ScaleHangar182]

@@scalemodelingltd thank you mate!

[@gorlestondoug]

One of my all time favourite aircraft, had to watch with the sound of though.

[@markbellamy9550]

Fantastic work as always, Its good to see you posting build videos again. I love watching your work.

[@ScaleHangar182]

thank you!

[@Bob-b7x6v]

Using those SMS lacquer paints for staining the light gull gray and insignia white is a cool technique. You always surprise me, boss. When are we getting your build-off with Plasmo/ David Damek?

[@karolus1990]

Thats a lot of metal parts! :D Really like the epoxy+knife texture hack, thanks for that! You shed some light how to use color pecils, appreciate it :) seems to be nice model to build. Anyway, great build, fantastic result, big boy on the deck :D go for C-130 on a carrier :D Bravo!

[@neilhaas]

Thats a very nice jet A-3 Skywarrior model aircraft. Love jets. 😊😊⭐⭐😀😁☺️🤩😇🤩

[@SprueFascinationChannel]

Lovely work, especially weathering 👏

[@septiccalling8341]

Thats a beauty! Lovely job 👍🏻👏🏻👌🏻

[@defdef6230]

Stunning build... glad to see you back my friend! Cheers from Argentina

[@ScaleHangar182]

thank you!

[@gtv6chuck]

A great build with just enough aging. I always thought these were very cool planes.

[@allanbyallas7546]

Beautiful work 🙏

[@ScaleHangar182]

@@allanbyallas7546 thank you

[@timshaw1712]

Always wanted to see a build of one of these - I think you aced it!!! I wants one now, precious!!!!!!

[@ScaleHangar182]

@timshaw1712 it's... not a great kit. The whole interior, bomb bays etc it's great but it's getting problematic when you close both fuselage halves and start puting every other parts together, especially with wings fit if you want them unfolded and the wing roots. Also for me it was a bit too big to handle but maybe because I also had to fit everything within the camera frame.

[@markfergerson2145]

@@ScaleHangar182The kit is big because the aircraft is big, positively gigantic for a carrier based aircraft. A diorama with standing figures next to it will make it more obvious that what we see on camera even given the cockpit layout. The US Navy has flown several side by side seating aircraft and they are all quite chunky compared to any single seat plane. Add my vote to the “great build” list. The Navy does like to keep its planes as clean as possible so you can’t be accused of excess weathering- what you did is quite representative of the real thing.

[@lucasner463]

Fantastic build!!!

[@peterwright217]

top build on the A3

[@lebaillidessavoies3889]

A3D= all 3 dead (no ejection seats on it) nice aircraft , nice build👍

[@krugmeister7301]

A1 SUPER DETAIL WORK...NOW...DOES IT FLY..💯💯💯💯💯🥰

[@darthhokum]

Perfect work 🔥🔥🔥

[@charlesmcclure5994]

I love watching you build and whether the aircrafts you do a excellent job 👍👍

[@ΔημήτρηςΠαπαδομανωλάκης]

Excellent built!!!!

[@suecobandito8954]

Nice model. A3D-All Three Dead. No ejection seats, crew drops out the bottom. Used to see 'em all the time all over the world-VR-50 "Drifty Fifty".

[@libero2798]

Very nice build!

[@foreverplastickits138]

*The Skywarrior isn't very popular among modelers but it did a great job, excellent work on this beautiful model David!*

[@Bob-b7x6v]

That's a nice Whale, Maestro Branski.

[@Foamboard-Flyby]

Incredible detail and craftsmanship!

[@Bob-b7x6v]

I always thought the way you made seat cushions out of epoxy putty was cool.

[@SirJohn2024]

Nice subject, excellent build... Kudos... 😎

[@ScaleHangar182]

Thank you!

[@diyfireking]

How awesome, such a great work ✨✨

[@caudleryan123]

Beautiful build! I wish we could get those SMS paints more readily in the states. But, the retailers here seem to be sold out on just about all of them. Shame, they look like they spray very nice!

[@ScaleHangar182]

@@caudleryan123 have you checked all retailers list on SMS website?

[@Artur-bu1ig]

Model wyszedł rewelacyjnie.Pozdrowienia z Polski.👍

[@robertmunoz7543]

Nice job!🤪 Luv tamiya epoxy putty but unfortunately it goes rock solid if not used often enough!😳 Jman

[@ScaleHangar182]

Actually I have mine a couple years now and it's still like new if you store it properly

[@robertmunoz7543]

@@ScaleHangar182 fascinating spck said!🤔 Jman

[@modelfun]

Bardzo ciekawy samolot. Nawet nie wiedziałem że taki istniał. Poszła łapka w górę. Dzięki za film!

[@goforitpainting]

Professional 👍

[@АлександрШапошников-х3е]

Super!

[@franciscoj.sepulvedal.7975]

Please come back !

[@ScaleHangar182]

I will, soon

[@gcucu75]

Bellissimo👏🏻👏🏻👏🏻

[@fabioquintilii7160]

MAESTRO!!!!

[@maxroberts1717]

Hi Dawid, another excellent model build. Great to see you do several different weathering techniques. Thanks for your time in putting this video together and sharing. Are you going to Telford this year.?

[@ScaleHangar182]

I hope I will be there mate! thank you veryy much for kind words!

[@maxroberts1717]

👍

[@WW2Fr3k]

Great build! Where did you get that sanding bow tool at 9:02 ?? How can I find it?

[@flyingpizza7486]

What's the song used at 10 minutes? W video

[@Bob-b7x6v]

Ed Heinemann at Douglas had his successes, then he'd have Willy the Whale once in a while. I met a navy veteran at a hobby store who said if you had to bail out of an A3D, you were probably good as dead.

[@Bob-b7x6v]

You bought the airbrush Barbatos Rex got his name on? That guy is a Gundam wizard. He just came out with his own line of paints.

[@andanteconbrio2773]

👏👏👏

[@hazeldsr]

these things must be comically large next to ww2 bombers or small commercial planes

[@heidihobear]

Ok where did the 80s music come from

[@Skywarriorguru]

Dude that looks so amazing. How much for one of those girls

[@ScaleHangar182]

@@Skywarriorguru what do you mean?

[@Skywarriorguru]

@@ScaleHangar182 Could you make one for me and how much would it cost

[@ScaleHangar182]

@@Skywarriorguru Probably around $800

[@Skywarriorguru]

@@ScaleHangar182 Can I get your info

[@ScaleHangar182]

@@Skywarriorguru my email address is in description of that video

[@davegiles2344]

👍👍👍👍

[@robertchaney8684]

Maybe next time add some Verbalization!

[@ScaleHangar182]

nah, im good.

[@RAMENTOY]

We sent an email reply to you but haven’t heard back. Did you get our email ? Please perhaps check your spam or junk folder. Thanks

[@ScaleHangar182]

Sorry I was busy and forgot to reply. Will do that today

[@AA-xo9uw]

A3D - All Three Dead - due to no ejection seats.

[@annasartmodelling69]

❤😂🎉❤😂🎉❤😂🎉

[@robertjensen1438]

Just a comment for the algorithm

[@Bob-b7x6v]

So much white...

[@jamesoutland3429]

Just a random question. Been watching your builds for awhile now. What do you do with them once they are complete? Do you keep them or they commission etc?

[@ScaleHangar182]

I sold most of them but I don't do comissions. Some of them are on ebay, If they sell, they sell if not, It's also okay :)

[@garyyoung4074]

I built this one. I always build jets flying so don't have to mess around with spindilly, easily broken landing gear. I had to scrounge up a "crew" but besides that, it went together well. Why no pilot figures included REALLY ticks me off....seems to me ALL the older monogram or revell kits had crew figures included. With modern computer scanning/3D printing, what is the problem? Nice looking model. How about a 1/48 B-47 and C-119G? Those would sell a million if a company would produce them!!!

[@ScaleHangar182]

I completly understand your point. But I guess its quite a lot of extra work with all that technology. Back then yes, you had figures but looking at them now they dont look so great. Fortunately there is some great aftermarket pilots as well as aircraft carrier crew figures. As for your other question, Im a bit fed up with large 1/48 kits like this one so I want to build a few smaller jets now and already working on two ;) (as well as 1/700 aircraft carrier)

[@darthhokum]

Perfect work 🔥🔥🔥