ScanNCut - Cutting Fabric, Your Questions Answered

[@LovingHandsDesign]

This was awesome and very, very helpful. I’ve had my Scan and Cut for years and have failed to totally understand such a simple thing. Your videos and explanations are perfect. I’m a visual learner and you explain things short and to the point but very throughly. I appreciate your time, knowledge and sharing.

[@PowerToolsWithThread]

Glad it was helpful!

[@donnadailey5062]

So appreciate your time and educational tutorials. Am "frozen" with fear about this machine because I want to cut out my applique pieces and then have my embroidery machine accurately stitch them in the placement positions... am sick of stitching the "placement, trim with applique scissors, then tackdown" and never being happy with that results (its my trim applique ability to get it just right). So... do you have a tutorial on how to veriy simply transfer my cut applique piece back to my embroidery machine? I now know to choose "pre-cut" shape/segment/element, but again, frozen doesn't begin to describe this super senior! Thank you so much. love your teaching method and your voice is so very pleasant... and you don't have your hands flying every or your tutorials loaded with "fluff." Thank you again, and again.

[@PowerToolsWithThread]

Break out the scrap basket and test first. Once you’re comfortable, use your good fabric. You’ll be so glad you did!

[@maytesmart]

Absolutely the best Scan and Cut video for cutting fabric I've seen thus far. Thank you!!!

[@lorim2074]

Becky, its always helpful to watch! Its my second time too. I am always finding something to learn. Ill probably watch these over many times! Much love to ya! ❤

[@michellecobb3530]

Thank you. I'm contemplating one of these but unsure which to get

[@kaylucas5260]

Helped me more than any KZbin video. Thank you so much it told me which meant to use which blade to use and that’s what I needed. Thank you thank you thank you❤

[@micheleh4016]

Thank you, Becky! I had a bad experience with Heat and Bond on my Super sticky mat. It was ugly! Then I figured out that I should turn the fabric over so the fabric side was down against the mat with H&B side up. Much better! LOL. Your explanations were much more helpful than the fella at the store where I bought my Scan n Cut. He's not a fabric person, obviously. I do appreciate you as a resource. Keep up the great videos.

[@ritamcconnell7963]

Do you leave the paper on the H&B?

[@carolinekalokerinos9352]

Thank you Becky for the great tips on the mats&how to clean them.

[@scottydog6539]

You are so helpful, thank you. Explaining the mat use and cleaning for your DX Scan and Cut is great. Use of the “heat and bond” On the mats was the best info. Thank you so very much.

[@conqueringmountscrapmorewi2509]

Another busy day for me getting things done and organized for Monday's filming. I so enjoy sitting with my hand quilting and watching your video! I hope you have an amazing day! Thanks for posting this video.

[@cdodson8860]

Becky thank you for the clear, concise instructions. The S&C manual is not the best and prints out in a very small font size. Thanks to your instruction videos I will feel confident working with my new Scan and Cut.

[@sharonberman2384]

Thank you Becky! Great information !

[@cindymcfarland4686]

Love love love these scan n cut tidbits you give us. Have you ever considered a link where your viewers can "buy you a cup of coffee"?? I don't know what it's called or how you do it but if you figured it out I would certainly support you!

[@dianned-sewpreciousemb]

Wow - This was so very helpful and so detailed. I have watched lots of videos with other instructors and this is the best. Thank you so much Becky!! Love all you do for us. :)

[@kathytroutman2062]

Thank you! I just purchased my Bro Scan n cutter. I will be using it to cut quilt pieces.

[@susannewilburn1270]

Thank you this was very simple to understand and informative.

[@merrymacmurphy]

Thanks!

[@PowerToolsWithThread]

Thank you so much for your kind generosity. It really helps the channel and I truly appreciate it!

[@ellenhofer3343]

Thank you Becky. This was super helpful for me!

[@annphilbeck5174]

I have the SDX230DX Love Love Love. all I did was cut vinyl with the half cut on. then I cut fabric and oops. now I know. Thanks Becky

[@merrymacmurphy]

I just discovered your videos, wow! Thank you so much. I have learned so many new tips and tricks from watching them. you do an excellent job of explaining things. You are awesome! Thanks for making these wonderful videos.

[@maryannbaughman215]

Thanks so much Becky!

[@deborahg9636]

Becky I have cut fabric using the black blade, gold blade and now the new rotary blade. The rotary blade works amazingly and the cuts are much smoother. I hope you will give it a try once they are available again.

[@josieloya9801]

Thank you, thank you, thank you. I ruined my fabric mat and I really appreciate this video. It answered the questions I had.

[@valsawatzky2153]

Thank you Becky , I'm putting the teal mat on my list.

[@CherryBelle-sh2jx]

Hi Becky, just found your channel and you ate anazing. Thanks so much for all the fabric cutting info.....wonderful xx ps im in the UK

[@beckiecaughman9017]

Thank you Becky! Great info.

[@ginnyr5437]

Thank you Becky this answered so many question. Also answered a lot of question that was being asked on facebook.

[@rebrandal4042]

Thank you Becky! Very helpful info!!

[@quiltlizzy]

GREAT video - you really answered my questions about cutting fabric/applique pieces

[@sandracopeland5649]

Helps me a lot with this kind of videos. Just ❤️ it!!

[@lindahamilton5521]

Wow..i was using my scan n cut this morning and played one of your old videos. i played it stopped played it and ect...the questions you Answered were ones i was dealing with this morning...You must have read my mind. lol

[@JamOw86]

Thanks Becky…. Just received my ScanNcut in the mail on Thursday. I’m so excited about getting started. TFS I ❤️ your channel…

[@Marnie1869]

Thank you love my scan n cut

[@cynthiah6556]

Thank you for the Scan N Cut information! I bought mine used from a friend. I have been using the teal mat for applique. Good to know about the gold mat and to put fabric side down on purple mat. I will have to look into Awesome. No Dollar General any where near me.

[@lizm4557]

Wow, this answered so many questions I had but didn't want to ask!!! Especially that cup on the side of your ScanNCut. Thank you so much!!!

[@karlcallas8732]

Thanks, this Video was very helpful! Keep it up. Greetings from Germany.

[@yorkiepeachygirlllc761]

Thanks so much for your always "spot on" videos. Learning how to use my SDX325. See ya on the cruise.

[@lynnshepard7485]

How timely. Thanks, Becky! My Scan N Cut is supposed to arrive today, and I have lots to learn! I’ve been watching you for a while now, and I really want to let this machine cut my appliqué pieces. Some pattern pieces, too! The front roller for larger fabric pieces was free with my bundle. We’ll see how that goes. 😂

[@jeannekline6748]

I hope you try the rotary cutter on the scan n cut for fabric? I have heard that it is suppose to be great for fabric. I enjoy your your show. ❤❤❤

[@sherrysenn2177]

Thanks a lot. This answered many of my questions.

[@hi-dores4111]

Thank you💕

[@bethh6527]

Love your videos! I've had an old Scan N Cut 650 for years, but never was happy with the fabric cuts so mainly did HTV and paper. Now have the new SDX325, and have done several successful fabric cuts - wow!! Of course, messed up the first one with HNBL on the fabric mat... you were not kidding about the hour to clean it off! I'm going to write on my mats like you did on your standard one, so I don't have to remember what to do with each. the low tack mat is unfortunately very expensive, so I think I'll just continue to use the standard one... maybe buy a second to 'fuzz up' so it becomes a lower tack!

[@debbiewhite3270]

This was so helpful. TY. I use paper tape. I don't remember if I learned about the wipes from you but that is also what I use.

[@josiebradley9802]

Thank you Becky! I was wondering can I cut fleece with the gold blade.

[@conniesoares157]

Thanks for the info for the scan and cut…I just bought my friends machine and hope to try fabric…I also like cutting vinyl for shirts for myself, friends and grandkids!

[@mabelbrooks9881]

Thanks Becky! I think I will just use the teal one with the HnB fabric side up. I already had to paper peel my gold mat. 😂All is good. I got it cleaned to use again.

[@deniselawrence7491]

How did you clean your mat? I have HNB stuck to both my standard and teal mats. I am so lost. Oh gosh, your note was two years ago.

[@conniesoares157]

You can also get the Awesome spray at The Dollar Store. Great video!

[@kathythompson8057]

Thank you! I don’t have a gold mat…..off to Amazon for one and for a command shave cup!

[@cardinalartworks]

Thanks so much Becky! This is great!

[@leslieholder1011]

Hello. I just got the SDX125. My goal is to cut fabric with heat and bond for appliqué stitches on regular sewing machine. I want to cut a clam shell quilt shape. At the same time I want to cut smaller shapes around the clam shell. I look forward to learning this process. Thanks for the tutorials.

[@petmomful2260]

Thank you.

[@juliescreativeneedle7794]

I bought the rotary blade to cut wool.

[@PowerToolsWithThread]

Perfect medium for that blade. Smart!

[@Quiltingbyfaith]

You always have so much good information. Thanks.

[@sparklemint2458]

Thanks ❤

[@micheleh4016]

You have more seam rippers in stock. Yea! I've been wanting an aqua swirl for months. Thank you.

[@anitap.3336]

Very helpful information!! Thank you for the videos

[@pattymarchlowska5536]

Can you advise how to best use scan and cut to cut out patterns on felt?

[@PowerToolsWithThread]

I would do a test cut first. I'm not a felt crafter so that would be my advice. Have fun!

[@darlenerogers9258]

You mention using totally awesome. Do you dilute it before using like it mentions on bottle. Or do you just spray

[@PowerToolsWithThread]

The stuff I have is the non-concentrated version so I just spray. If I had the concentrate, I'd dilute like the bottle says to.

[@jlv1254]

Thank You Becky! Going next week to buy my ScanNCut. Yahoo!

[@PowerToolsWithThread]

Yay!! You're going to love it!

[@AreTheyAllYours]

Very helpful, thank you!

[@alexandriaspann8194]

Becky I finely did it I Got my brother sdx330 I would like to know about the scribe panel in the back I would like to make one for my channel

[@joelaoetterer]

Love love love your videos! Have you cut batting or insul-bright with the Scan n Cut? Making trivets :D

[@PowerToolsWithThread]

Not yet!

[@joelaoetterer]

@@PowerToolsWithThread - got got brave yesterday...insul-bright, standard mat, pressure 8 and Blade Depth 7. Blue tape the end that goes into machine first. It made 3 passes but it cut just fine. Used your tip on cleaning it with the Awesome and wipe-y. (((HUGS)))

[@sandycooper3188]

Wow. That was crazy that I just happened on your video today and also the Lori Holt video regarding the chicken salad sew along. I’m a little late to the party. I was wondering how you get the images to the scan and cut canvas. I’ve had one for years but never use canvas. Thanks so much for any help. Take care ❤️

[@PowerToolsWithThread]

Welcome! This video will help with getting the shapes into Canvas. I have an entire playlist for Chicken Salad. Here's the starter: kzbin.info/www/bejne/onbKnaOglMZ4fdU. Have fun!

[@sandycooper3188]

Thank you so much!!! ❤️

[@dkarnold4162]

Learned a bunch…I may get as an and cut with this kind of info! You sure are doing good on WW!

[@PowerToolsWithThread]

Thank you!

[@kaysmart2646]

Do you have any videos which show you how to scan a design separate the pieces and then add the a bit to the sides that need to go under another piece of fabric ?

[@kathymartin8789]

Hi Becky - I have an older Scan N Cut Model CM650WX - could you possibly show how to use this model with your techniques

[@PowerToolsWithThread]

I have that model but it's at our house at the coast so I don't have much cause to use it any longer. Only in an emergency when I'm working on a project that I forgot to cut a piece out. The functions are very much the same as mine. The buttons are just a tad bit different but the pictures of the icons are the same. The biggest difference is that you need to do a test first to make sure the blade is to the correct depth before each cut.

[@kathyr7167]

Thanks for the great video. Is the scan n cut by brother a stand alone cutter? I do not have a brother embroidery machine. Can SVG files be sent from any laptop to the scan n cut? Thank you.

[@PowerToolsWithThread]

Great questions! Yes, the SNC is a stand alone cutter and it does not need to be used with Brother machines. Yes, SVG files on your laptop can be used, but you'll need to upload them to the Brother Canvas Cloud (free at canvasworkspace.brother.com - there is a button to upload svg files), and then download that file to the SNC. Or, you can transfer the svg via a USB thumb drive.

[@pansies1089]

do you dilute the totally awesome or do you use it straight

[@PowerToolsWithThread]

I buy the regular strength - not the concentrated.

[@Leed216]

How do you get those Lori Holt shapes on your scan n cut for appliqué? Are there SVG files somewhere?

[@bkt2009]

Is there a bigger machine available

[@PowerToolsWithThread]

As far as I know, all of the SNC machines use a mat that is 12" wide. However some models will use a 24" long mat.

[@scottydog6539]

Which Brother Scan & Cut model do you own. I see it is a DX Innov model.

[@PowerToolsWithThread]

Mine is the SDX225. I got it back in 2019.

[@cdodson8860]

Becky, I am scanning a pattern for a toy fox. I’m using quilting cotton on a gold fabric mat (new). My fabric catches. I have tried using the black blade as well as the gold blade. The design does not require a stabilizer. Help??

[@darceyday5410]

Does the Wi-Fi capable scan n cuts work with the new Data Base Transfer program?

[@cynthiabirse9964]

HiI 'm wondering if i can use this machine to cut templates for stone engraving, it's a thin rubber with self adhesive plastic back. any idea?

[@cathy3392]

What is a support sheet?

[@PowerToolsWithThread]

It’s an extra sticky piece of plastic that you can attach to your mat to make it sticky again.

[@JC-mh3ze]

I have a 125 machine. It seems so slow. Are the other models faster?

[@bettyweeks5188]

Hi Becky I bought some totally awesome at dollar tree but it is concentrated so have to add water to it, will that still work for the mats, where did you find yours or maybe yours is the same Thanks Betty

[@PowerToolsWithThread]

Hi Betty, I got mine from Dollar General (vs. Dollar Tree) and it comes ready to use and doesn't have to be diluted.

[@bettyweeks5188]

@@PowerToolsWithThread Ok thank you , I went over there and bought some there to, Betty

[@Creative-Chaos]

If a pattern piece indicated that it should be placed on the fold, how do I use canvas workspace to copy the image and weld the two sides together?

[@ShaynaKrause]

🔴Becky, looking really youthful in this video. I think it’s the hair. I’m following your SnC videos. Seeing if I want to purchase one.

[@PowerToolsWithThread]

You're too kind! Thank you! "Retirement" suits me? YES! lol

[@ShaynaKrause]

@@PowerToolsWithThread YES MA'AM!

[@LyndaLValdez]

Becky, a while back you recommended 2 sisters in Briton who did a seres of classes on the Scan n CUT. I purchased the classes and have watched them but can no longer find them no remember how to get to their site. Can you or one of your followers help me with finding thema//

[@phyllismoynihan8183]

Can you add a link to where the cabinet dimensions are located. I've tried to locate them but have not had any luck. Thanks in advance.

[@Lisag1222]

Could you suggest which one to buy? Only going to use it to cut fabric for appliqués

[@PowerToolsWithThread]

I wrote this blog post! powertoolswiththread.com/2022/07/12/which-scanncut-should-i-buy/

[@melaniematcheson8833]

Be very careful with that totally awesome. I had a severe allergic reaction to it.

[@kathykumler1542]

Thank you Becky. Very good video! Explains everything in very much detail and answers a lot of questions. Is totally awesome sold in ur amazon store? I didn’t see it?

[@PowerToolsWithThread]

I fixed that! amazon.com/shop/powertoolswiththread Check the section for ScanNCut

[@kathykumler1542]

Sorry Becky still didn’t see it there. 🤔

[@PowerToolsWithThread]

@@kathykumler1542 Sorry, I misread your comment. I was going to add it in but it's over $11 for two bottles! Yikes! You're best to go to dollargeneral.com and grab it there.

[@lindamallett278]

@@PowerToolsWithThread They also sell is at my local Dollar Tree store.

[@caroleblackmore6390]

There is a gold mat for fabric only

[@PowerToolsWithThread]

Yes, I mentioned in this video that the gold mat is meant to be used without any substrate on it. :)

[@marystreeter134]

I purchased some Awesome from Dollar General. It says to dilute it. Do you?

[@PowerToolsWithThread]

The stuff in the spray bottle is ready to use without dilution. There are larger containers that say to dilute.

[@brendaestes6797]

Can Cricut mats be used on the Scan n Cut?

[@PowerToolsWithThread]

Unfortunately no. The mats are not universal between the two machines.

[@asheryl1966]

Thank you so much for this video. I learned a lot. I just purchased my first scan n cut about 2 weeks ago and have so much to learn.. I have a question regarding the Simply Applique Software. Not sure if you can answer it but I'll ask anyway. I recently bought software from RNK distributing called Craft N Cut. It works with different cutting machines although the software hasn't been updated to reflect Brother DX machines. It gives you the cutting settings for the older versions but it's great for creating your own SVG files or converting files into cut files. In looking at Simply Applique software, it looks as if it does the same thing. I hate to purchase more software if I don't need it. I don't suppose you know anything about the software I already own.

[@PowerToolsWithThread]

I've never used that software. Hope you have fun with it!

[@jenniferdavis5482]

Hello I hope my question fines you 9 months after video. Website says the SDX230DX Innovis has 140 quilt patterns built in does any of the others have the ability to scan a quilt pattern? And For example could I cut say 30 blocks at a time?

[@PowerToolsWithThread]

Absolutely. You'd probably need a 24" mat.

[@jenniferdavis5482]

Thank you so much for replying your awesome! I am ordering the 230 this morning!

[@dwighthill4548]

Funny that you mentioned the awesome, my husband swears by it for use in his shop and they must have one to clean your car too because he says it is the best thing he has ever found for car wash. I have been thinking about purchasing the Embrillance software and a scan and cut but not sure this old bird can figure it out. I do lots of appliqué the old fashioned way but think what you do goes so much faster.. I am not computer savvy at all, however, I did learn my computerized sewing machines and my long arm love them all. Great video, thanks for all you do. Green Bananas.

[@maureencraig6923]

Hi Becky i am very very new to applique and quilting i was watching you explain how to use the machine and how to download designs for some reason i am finding it hard to follow i was wondering if you could explain it again i have watched your videos over and over but my brain is not getting it it talks about unzipping files have no idea what the hell thay are talking about hope you can help love your videos

[@PowerToolsWithThread]

Totally understand! Here's a video I made a while ago. See if this helps. :) kzbin.info/www/bejne/npDCaqCjoNx6hNU

[@stellarousou9695]

Great video..can you plaese advice me about felt? I have scx125e, black blade,and the gold mat..so,do i heatnbond? Straight on the mat? Change blade cut? Last i used felt on gold mat was a disaster and wouldnt come off..what about felt that comes with the backing on? I am so confused..any advice will be appreciated. Thank you.

[@PowerToolsWithThread]

So....felt is very fuzzy on its own, so you'd have to assume that it will leave "fuzz" on a sticky mat. I'd use the purple mat to adhere the felt and then after each and every cut, I'd wipe it down with Totally Awesome and a wipe. I'd use the black blade on the #2 side lever. But test first with some scrap felt. Pull up a small circle in the internal designs, scan the felt, and then try a cut. Good luck!

[@sharonderksen952]

One suggestion. I get so frustrated when people doing these instructor type utube don’t get to a point and demonstrate what the topic was. So many are like that.

[@cherylmazzoncini280]

Thank you