Schlüter Ditra Matting System

View and buy online: www.ctdtrade.c...
Ditra Mat from Schluter is a polyethylene uncoupling membrane featuring a grid like structure of square cavities, designed for use with tile and natural stone installations, neutralising any tension between problematic substrates and the tile, and bridging any stress cracks. The mat also acts as a waterproofing membrane to cope with any moisture that may occur on the underside of the substrate. Schluter Ditra matting should be applied using a suitable matting adhesive, such as Ardex AF200 Plus Matting Adhesive, with a 3mm or 4mm notched trowel.
👍 Bonded uncoupling
👍 Waterproofing
👍 Vapour pressure equalisation
👍 Mechanical adhesive lock allows faster installation
👍 Over 30 years experience
👍 The original and still the best
Schlüter®-DITRA 25 is a polyethylene membrane with a grid structure of square cavities, each cut back in a dovetail configuration and an anchoring fleece laminated to its underside.
Designed for tile and natural stone installations, Schlüter®-DITRA 25 serves as a waterproofing membrane, a vapour pressure equalisation layer to accommodate construction moisture occurring within the substrate and an uncoupling layer for problematic substrates. The substrate must be even and load bearing.
To bond Schlüter®-DITRA 25, use a bonding adhesive that is appropriate for the substrate. Apply the adhesive using a 3 x 3 mm or 4 x 4 mm notched trowel. The anchoring fleece on the underside of Schlüter®-DITRA 25 must be fully engaged in the adhesive to provide a mechanical bond to the substrate. Please observe the open time of the bonding adhesive. Using the thin-bed method and following all applicable industry standards, set the tile or stone covering directly on the Schlüter®- DITRA 25 in such a way that the tile adhesive becomes mechanically anchored in the square, cut back cavities of the Schlüter®- DITRA 25 matting.