Thank you for this video. These drives have a very confusing menu structure. Most of the functionality in these things I don't even use. I've been tearing my hair out at work trying to get this to work, as described in this video. Re. another video, you mention changing running modes alters some settings, so no wonder why I messed up a drive that was already working... Videos like this are very helpful in understanding the book. Now that I've watched this, I go back and read the menu settings in the book, and I just want to plant my face in my hands, as I feel so stupid that I didn't get it from reading it...
@baskarchandrakasan9952 жыл бұрын
Very nice teaching sir 👍
@schneiderelectric2 жыл бұрын
Thank you very much for your feedback!
@zairykucai30005 жыл бұрын
U saved my life today.. This inverter really really hard to use.. The programming structure really really really hard to understand..
@aadedeelectric2 жыл бұрын
thank you for sharing this video..good job
@joeski5415 жыл бұрын
Did you just connect the 24v, li1 and li2 + the powersupply for this?
@ruipaulofsantos7 жыл бұрын
Thank you, you saved my day!!!!
@saififtekhar9805Ай бұрын
How can we operate the motor in reverse direction using the keypad of this drive?
@schneiderelectricАй бұрын
Thank you for your message Saif. We house most of our documentation in a virtual database here: www.se.com/ww/en/download/. If this does not address your concerns, please reach out to a technical support person in your location.www.se.com/ww/en/work/support/country-selector/contact-us.jsp
@yusranakbar4 жыл бұрын
Problems in inverter keypad atv12h075m2 not functioning and out cff code.What should i do?
@drVukelja7 жыл бұрын
Thanks man!!!
@nayantha884 жыл бұрын
Hi, Once we done this do we need to change rEF parameter to AIUI for the jog enabling? or will it automatically set?
@velmuruganrajesh82404 жыл бұрын
How to activate relay function. How to use 0 frequency use normally No 0.1Hz Normally Nc How to activate. Pls send program settings.
@user-pu7vm4me1i2 ай бұрын
Как настроить реверс
@MukeshSharma-oh1eq3 жыл бұрын
Please Sir solution for OPF1 foalt Atv12hu15m2 vfd
@velmuruganrajesh82404 жыл бұрын
How to use DC break Schneider altiva312 ac drive Input voltage 230volt Out put voltage 220 3phase Motor kW 0.75kw
@rajamazher5544332 жыл бұрын
only fowerd run motor no rerwes run motor drive contection p24 F Forwed R rewes but no reweses motor run plz help me
@semenovalexn4 жыл бұрын
Altivar 312 не запускает двигатель с редуктором при 5 Гц,а уже при 6,5 запуск двигателя есть.0,75 altivar ,а двигатель 0,55 вт(с редуктором,подключения треугольник) какие параметры надо изменить,чтоб работал при 4-5 Гц.Спасибо
@yrwinnberroa64984 ай бұрын
hello i have a problem with my VFD is showing Over speed i using in Hydraulic pump do you know What parameter can I change to avoid that issue. is ATV630C16n4
@schneiderelectric4 ай бұрын
Thank you for your message. We house most of our documentation in a virtual database here: www.se.com/ww/en/download/. If this does not address your concerns, please reach out to a technical support person in your location.www.se.com/ww/en/work/support/country-selector/contact-us.jsp
@anwerknittingtechnology.7 жыл бұрын
thanks
@madiespoir42188 жыл бұрын
my ATV312 doesn't show rdy in first time i press and i hold the mode key and after rEF displays help me thank you.
@habiblaghrib99427 жыл бұрын
je voudrai savoir en detail la connection du bornier electronique d un variateur movitrac(x10)
@rishinishad486 жыл бұрын
i want ur help...how to connect digital speed meter to avt312 drive? and any parameter setting to digital speed meter....plzhelp me
@tomasdeleonhernandez4327 жыл бұрын
Great
@MukeshSharma-oh1eq3 жыл бұрын
Opf1 foalt solution please sir Atv12hu15m2
@chanduyadav41717 жыл бұрын
I dont understand for vfd controll by remote mode plz tell me about this from starting
@TheJohnClay7 жыл бұрын
Remote mode means the speed (frequency or motor speed in Hertz) and command (start and stop control) come from a source outside of the drive (such as a computer or building control center). Local mode means the speed and command are performed using the buttons on the drive itself. These controls can be separate so the command to start can be done locally using the buttons on the drive and the speed can come from a computer (or vice versa).
@rudyescala97466 жыл бұрын
All can u help me how to set parameter setting two units of inverter control in one volume
@rudyescala97466 жыл бұрын
I have problem we have a machine Use two inverter and controled in one volume .. when it damage i change the other one but when i start up the two inverter is more than 10hz defference i need only 2 hz defferent each other ...and now how to set this parameter
@rudyescala97466 жыл бұрын
Please help me
@schneiderelectric6 жыл бұрын
Hi Rudy, Thanks for reaching out. Please contact our support team directly for further assistance. Phone: 800-468-5342 option 1 (Internally dial 25777) Hours of operation: 8am-8pm ET, Mon-Fri excluding holidays e-mail: customer.services@us.schneider-electric.com
@BeardyMagicGuy5 жыл бұрын
Hi, thanks for the video, I have gone through all of these commands but still when I run the speed is locked in at 15 and cannot be altered by the dial... is there a limit that’s in place that I can turn off? Please advise
@kathiravan10136 жыл бұрын
OSF come, so, that one resetting program tell him
@bhoopendrabhardwaj40795 жыл бұрын
Sir my v fd derrik not work in load
@pawanshrivastav686 жыл бұрын
Plz Hindi vedio language to knowledge
@jkj14596 жыл бұрын
why keep changing ,procedures .in Schneider products , please keep it uniform and make it user friendly .
@zxhoon6 жыл бұрын
^^This - I wrongly assumed that I could configure the same way as an ATV61/71, by simply going to CTL, access level to 3 (from reading the 312 manual), I/O mode to separate and then ref to the jog wheel with command on the terminal. It didn't work, found this video which helped, but why does the VSD need to be put into local mode in the first place? If you configure the separate I/O mode, command on terminal speed ref on jog wheel, why doesn't it run? Stupid
@schneiderelectric6 жыл бұрын
Thanks for reaching out. The ATV312 is much different than the 61 or 71 as it relates to HMI control. The ATV312 knobs primary function in menu navigation. Speed reference is secondary. The knob can be used as speed control by setting FR1 to AIV1, but to use the knob you must navigate to LFR parameter first (easily done by pressing knob 3 times) The display is shown as 0-100% only, not in Hz this way. In local mode, the knob is primarily speed control, and secondary menu navigation. The way the 312 was engineered, to use the knob for speed control without going to the LFR parameter, we have to put the drive into local mode (knob now works without going to LFR) and set the profile to separate and command via terminals. Hope this helps.
@dmitryradchenko74586 жыл бұрын
Schneider Electric Altivar -Трехпроводное управление Three-wire control-button kzbin.info/www/bejne/emm9l31jjdmefrc
@dmitryradchenko74586 жыл бұрын
Schneider Electric Altivar -Трехпроводное управление Three-wire control-button kzbin.info/www/bejne/emm9l31jjdmefrc