Scooter intake manifold comparison zuma elite

Scooter manifold comparison zuma elie dio yamaha jog
scooterswapshop.com/products/stage6-big-valve-intake-zuma-vertical?_pos=23&_sid=31137cbc1&_ss=r
We bought some super chinese amazon intakes, from amazon, to compare to the stage6 intakes. Join us on this chinesium adventure, to learn more about what your getting when you buy one!
Let us know what you'd like us to compare next!
www.scooterswapshop.com
www.scooterpartshop.com
Stage zuma intake
scooterswapshop.com/products/stage6-reed-cage-vulcanized-zuma-horizontal
Stage6 dio intake
scooterswapshop.com/products/stage6-intake-manifold
SHARE SUBSCRIBE AND ENJOY!

[@BROKERICHGUYog]

Good thing i just ordered the stage6 for the adly from you guys.. Thanks again. good video as usual..

[@Scooterswapshop]

Thanks buddy!

[@that_texas_local]

Great detailed comparison of the two, seriously hated the unfocused camera

[@Scooterswapshop]

Me too. I had it on the wrong setting.

[@sunnybeachweddings7037]

Nice video! I ordered the same Stage 6 system and Stage 6 PWK 21 carb for my Piaggio powered Derbi Bulle 2004. Stage 6 MK II Sport, Yasuni R...I can’t wait to put it together new clutch with tidier springs Malossi 2000 variator...should come as a nice sport buid...

[@Scooterswapshop]

Very nice! you order from us?

[@sunnybeachweddings7037]

@@Scooterswapshop Unfortunately not, when I googled the keywords Derby Piaggio parts and your website came on I couldn’t find them on your page... I ordered a cylinder from Europe. Still... enjoying your videos and your team is awesome! And I have subscribed!!! Lol. I like the Gillera a lot!

[@jnice8416]

It would be awesome to get more track vids when the weather gets better

[@Scooterswapshop]

would be nice if a track would start running again for scoot races

[@marionbenitez868]

Stage 6 manifold are Taiwan made rebadged manifold, koso sells those manifold. Rubber does become brittle after prolong use, hard to find replacement rubber connector. TWH makes the same manifold.

[@Scooterswapshop]

YOU SURE?

[@MoSTILoUDTheGOAT]

Lmao “it’s going to fit good not only a goofer but yeah a good fitting so it might break” I love u Brandon 🤣🤣

[@Scooterswapshop]

These labels are pretty funny. We’ve seen some really bad ones.

[@mosiahbrowne2066]

Love how pin point the elements

[@Scooterswapshop]

cool

[@andreww.6283]

For the amount of time and effort that people put into making these CT manifolds, like sanding the surfaces on glass and such, it only makes sense to spend the extra $$$ and get a nice one. I bought the Naraku Dio intake, just because Stage6 was out of stock. Are those any good? I noticed that the Naraku manifold has a similar reed cage to the CT manifold

[@Scooterswapshop]

stage 6 or naruku is the way

[@correia.98]

would be great to see some videos of the instalation on the scooters , there are very few videos of this parts unboxing and practicly none of them installing the parts and showing how it fits and were can they bump on the frame , for example a 21 pwk on aerox 50

[@Scooterswapshop]

Thanks we do our best but most our viewers don’t subscribe and there’s not any income to cover the time to do another 200 videos a year. We do what we can when we have time :)

[@correia.98]

@@Scooterswapshop youre right , just subscribed 🙏 for more content , keep the good work

[@RyanJawswing]

Can you do a video on jetting stock carbs. Also when a bigger carb is needed. There is no English info on these zuma 50s.

[@Scooterswapshop]

something we can look into!

[@phat56pat]

Start linking products in the description

[@Scooterswapshop]

smart!

[@KrisGenchev]

What does the "stuffer" do ? Awesome video !

[@007.3l]

The stuffer sits inside the reed cage. It eliminates turbulence in the intake tract and provides maximum air flow to the intake ports, Provides crisp throttle response and better low end and mid range power

[@Scooterswapshop]

THIS

[@MOTTOTROOPER]

Stage 6 Products Hands down. Quality parts make a difference.

[@Scooterswapshop]

yes quality does

[@TruckerBill9]

I have an 87 Honda elite 150 and I can't for the life of me find an intake manifold replacement that is just a direct bolt up. You guys have something?

[@Scooterswapshop]

Oem Honda is the only one for that bike

[@YungRemy]

Hey since you opened that stage 6 for horizontal can I get it at a discount?

[@Scooterswapshop]

sure. but it was sold a year ago sorry

[@nicksmith2111]

Might sound silly but can someone explain to me how the valves are used on the stage 6 intake manifold ? My gilera 50sp doesnt have hoses going to the stock intake manifold ? Do i just leave the caps on and block them off ? Also what setups use these connections. Again sorry to sound dumb

[@Scooterswapshop]

leave the caps, one valve is oil one is vaccum.

[@nicksmith2111]

@@Scooterswapshop many thanks for the reply !

[@StressdRHB]

Hey I just got my wildfire r8 mooed with the qmb139 gy6 motor and I was wondering how to grow my channel and build my moped?

[@Scooterswapshop]

Start building it and document the progress

[@bikelifedave905___6]

The first thing you do is cut the key chain so it. Just says goof and put it on your buddies keys when he asks you to install that junk (done it a few times lol)

[@Scooterswapshop]

haha

[@skylaryoung3750]

Sweet baby Jesus what scoot was that at the track !?

[@Scooterswapshop]

My big evo 94cc polini track bike. It now resides in Bruce Chapman’s prebug we build last spring

[@walterboczula8774]

Wanna get for Yamaha Zuma Vertical engine intake manifold. Does it exist?

[@Scooterswapshop]

Yes we have them in stock

[@AmfaszyDumbum]

Dzieki za ten film szkoda ze u nas w Polsce ciezko o takie czesci albo grubo kosztują LeWa :D

[@Scooterswapshop]

thanks

[@itsmoneyoverbitches]

The first one fits the 84 aero nh125 too

[@willardins6872]

Went from polini reed valves to goofit... I'm going back

[@skateorhatejames]

Will the stage 6 intake fit Roughhouse 50?

[@Bert439]

Genuine has a forum I want to say it does but make sure

[@Scooterswapshop]

call the shop talk to Paul he can get you the parts you need

[@shadgeorge1719]

Will this manifold fit Yamaha mbk booster/stunt

[@Scooterswapshop]

We have one for it call the shop.

[@cherrylpilitatorricer1705]

does stage6 has manifold for honda jog nextzone?

[@Scooterswapshop]

next zone?

[@jasonjaeger4042]

I was just on your site, tax returns are coming so gonna mods my kids zuma, and a lot of products are sold out. Are ya just waiting to restock or not carrying those parts anymore?

[@Scooterswapshop]

I can’t get items that they aren’t producing. These companies stop making items for moths at a time. So nobody can get them.

[@jasonjaeger4042]

@@Scooterswapshop I understand man, thanks for the reply. I'll still find plenty of stuff to make it fast on ur site.

[@Scooterswapshop]

You can always email us and we can set you up a package. We do it every day. You definitely don’t want to guess when buying parts as they may not work well together

[@jasonjaeger4042]

@@Scooterswapshop Yeah I'm an MX tech, don't really mess with scooters much. I'll make sure to contact ya as soon as the snow melts. Gotta say, the customer service and knowledge of your company is great. Racing MX and building bikes I deal with mostly idiots who don't know what they're selling.

[@4wdglampingaustralia102]

Does this fit a jog with a stock 5bm manifold?

[@Scooterswapshop]

check our website

[@4wdglampingaustralia102]

@@Scooterswapshop of course I have with no luck.

[@noisebreaker5060]

Mon scooter est full stage6..c le top

[@Bert439]

Yeah I'll just stick OEM, I'll commute for life on mine haha

[@Scooterswapshop]

I know guys who have put 20k on their big bore kits. But if your happy with the performance oem is always best for longevity!

[@healthyhuman2360]

my polini boot dried out too.

[@Scooterswapshop]

BUMMMMMMER! sorry man!

[@captaincrunch93]

for what polini cost your cheaper to buy a 150cc scotter cheaper!!!

[@Scooterswapshop]

Chinese trash vs Italian.

[@StormX9000]

Hundreds of people are running those ct intakes. I am on a polini carburettor and no problems yet.

[@Scooterswapshop]

Yes and the majority of them aren’t going to be running right. Air leaks make you lean.

[@StormX9000]

A few slight modifications and she's all good.

[@corymitchell2720]

Yep I took an hour to prep my ct mani and took am old kx dirt bike reed cage and boyson reeds with a polini 26 mm carb Ps I also sant plasted it in and out. I runs perfect andvas good as my buddysvstagev6 set up.

[@svenpapillot8445]

Can you guys please please send me some polini,hoonigan,malossi stickers please i just need some awesome stickers please

[@Scooterswapshop]

Send us an email :)

[@matthewnorris203]

Road racing scooters?? What😮😮

[@noisebreaker5060]

Incomparable avec stage6... la qualité se paye.

[@stephane123123]

29$ shipped and it’s literally trash!

[@Scooterswapshop]

Sad part is some shops sell them for $49-65

[@mooosamooosa4526]

My eyes hurt me

[@Scooterswapshop]

sorry to hear

[@ballstank3904]

Stage 6 is rubbish