Scooterswapshop Zuma yasuni r derestrict

De restricting the yasuni r for Yamaha Zuma. We sell these derestricted
scooterswapsho...
PLEASE LIKE SHARE AND SUBSCRIBE! Make sure to click notifications to keep up to date on the latest and greatest happenings. ALL parts come from our shop in Portland, Oregon!
Thank you for your support!

[@ぷーひで]

貴方の説明で… YASUNIサイレンサーのリペアが出来そうです‼️(笑) ありがとうございます🎵

[@Scooterswapshop]

English please sir?

[@srenhjortgaard7282]

Is it in the yasuni z the silencer ristriktor . I got yasuni z on my yamaha neos

[@iancooper7127]

Why not just drill it out? Way easier than taking it apart. Even if it’s stainless. Use a drill press and go slow.

[@justingauthier1788]

My son has this on his scooter do we need to rejet the carb after doing this ? Thank you and great video

[@Scooterswapshop]

Yes you have to rejet

[@justingauthier1788]

@@Scooterswapshop thank you for your time :) will look into rejet

[@exapioz3075]

For me this pipe would cost 238$ while a next r pipe would cost 155$. I want a good setup for a reasonable setup, is this worth the upgrade? Was thinking of a 70cc kit as well and lighter rollers and bigger jet

[@Scooterswapshop]

Next r is comparable to a Yasuni z, very close to stock. Get a malossi flip if your budget doesn’t allow $200+

[@exapioz3075]

@@Scooterswapshop I cant find the malossi flip for peugeot speedfight 3 50 AC...?

[@exapioz3075]

@@Scooterswapshop i could get a stage 6 pro replica for about 100$ but that pipe has lower power at low rpm and to get the full effect you need really high rpm and thats extra stress for the engine and more fuel and some poeple has had problems making it fit my scoot. So what do you think?

[@Scooterswapshop]

@@exapioz3075 replica is not a good pipe. It has zero performance down low, is only up top and kills stock cranks. And is incredibly loud

[@exapioz3075]

@@Scooterswapshop But is it worth the extra 100$ to get the yasuni R, would it be worth it? would i still need the 70cc kit, it would all become so expensive and im just wondering if its all worth it? looking for the best bang for my buck.

[@fritzsound]

Lots of aftermarket items for the Navi in Mexico, engine guards and leather seats. Can you source them or have them fabricated in the US? With Navi being a hot item I think it would be a good move.

[@Scooterswapshop]

nope cant source items from mexico currently

[@IsabellaaaRider]

Would you say that the Yasuni Z is better or worse? I obviously want two things, speed and sound. I’ve heard that this makes you loose low end power but if it goes fine after like 40km/ph

[@Scooterswapshop]

Yasuni z is just barely better than stock

[@IsabellaaaRider]

Scooterswapshop So what would you recommend me getting? Should I just go with the one in the video? I’m obviously not expecting it to sound like a Harley but something with a little more roar than my current would be amazing.

[@pubbiehive]

The Z is good for stock cylinders or mild 70 cc.

[@Scooterswapshop]

Connor: RK-800 the z is a waste of money go with a r or a ncy

[@IsabellaaaRider]

Scooterswapshop Alright I’l check it out, thanks for the help

[@yankeehunter3466]

Why not just grind the hole wider?

[@nova3990]

Is c10 a good choice ? I had a pro replica before its like a yas r 2.0

[@Sibenik-xl6ev]

Can you give advice which one is better MALOSSI EXHAUST SYSTEM FLIP HOMOLOGATED or YASUNI R on gilera runner kit (dr.evo)

[@Scooterswapshop]

give the shop a call or email we can give you more details! and get you one shipped!

[@Sibenik-xl6ev]

@@Scooterswapshop i am from europe so shipping$$$

[@pubbiehive]

@@Sibenik-xl6ev Yasuni R, buy from Racing Planet or Maxiscoot.

[@leary1051]

What’s better for my setup. I have a Yamaha aerox 70cc ruining a delorti 17.5 carb. 5g rollers. Stage 6 belt. Malossi filter. Was wondering which is best the stage 6 exhaust or the yasuni

[@Scooterswapshop]

NonCopyRighted yasuni is a better pipe

[@leary1051]

Ye I’m going to buy the yasuni r. I recently had the stage 6 carbon rep but unfortunately it got Damaged and isn’t repairable. So will be giving this one a try

[@Alvin-js4zk]

Hey! I have a quick question about the yasuni adrenaline exhaust does it have good acceleration when you stand still and drive away? Like low speed rpm? I got stage6 mk2! I would love some help

[@Scooterswapshop]

call the shop we can get you the proper exhaust for your bike!

[@snipezpro9554]

yasuni adrenaline its just a sticker its an z or r look at spring on silencer thats the way to tell if its a z without or with spring it's a yasuni r

[@philippebourgon2500]

Why leovince & technigaz are bad? Is it really bad for my engine? Or only poor performances..

[@Scooterswapshop]

we explain in many videos

[@mattalger2325]

Is the Yazuni Z better for a stock cylinder?

[@samuelclaesson341]

Can I use the Yasuni R with a Malossi MHR Racing 70cc, pwk 26mm and a Race ignition or do I need to buy something else? The setup is on a Peugeot jetforce!

[@pubbiehive]

You need at least a C16.

[@Scooterswapshop]

we don't have those bikes in the usa

[@Pablo_Rey-Medina]

Is it louder without the restrictions or not?

[@Scooterswapshop]

Yes but you HAVE to de restrict it, it will not run correct otherwise

[@Ethan_Amendt.509]

When I buy the exhaust off your website can I ask for you guys to remove it? Or do I have to send it somewhere

[@Scooterswapshop]

Yes there’s an option for this service on the website

[@Ethan_Amendt.509]

@@Scooterswapshopwhere would I look for that option?

[@matthijsverweij3894]

Is there always a restriction in the silencer

[@Akip98]

no

[@Scooterswapshop]

in these exhausts yes

[@paulflood4420]

Can I use a Stage6 racing mk2 cylinder with the Yasuni r

[@Scooterswapshop]

paul did brandon answer this on the live for you? if not call tomorrow at 9:30 or later he will let you know and get you anything you need

[@paulflood4420]

@@Scooterswapshop yes and thanks for the advice

[@jaydenplaysguitar3896]

What about the Yasuni Z? Do they need derestricting? How do I know if mines already been derestricted or not?

[@Scooterswapshop]

The z I believe is not restricted. Not 100% sure we don’t sell those are they’re not much better than stock

[@pubbiehive]

Yes, they are restricted in the same way. Just take it off and check.

[@doomslayer4209]

It's restricted

[@Sneds_]

Would you want to derestrict it on a stock cylinder?

[@Scooterswapshop]

yep!

[@corona2261]

@@Scooterswapshop im dutch and we have the 50kmph rule. If i leave it restricted will it run fine or fucked up?

[@viggoskrrt5170]

cor ona it Will be fine

[@pubbiehive]

@@corona2261 Runs fine but the stock pipe is better.

[@matthijsverweij3894]

How do you open the silencer?

[@Scooterswapshop]

very carefully

[@corona2261]

how will it run restricted? we got this stupid 30mph rule in europe

[@pubbiehive]

Worse than stock.

[@Scooterswapshop]

slow

[@perxycfw4411]

Will this fit on a lexmoto scout

[@Scooterswapshop]

if thats a Zuma yes

[@perxycfw4411]

@@Scooterswapshop it’s a 4 stroke it won’t really work as good as a 2 stroke so never mind

[@SubieSage]

Wow what a pain in the ass

[@Scooterswapshop]

It can be a pain that’s for sure

[@ninoechavez1402]

Does removing the restrictor make it so much louder like making peeps head turn while reving up? Mine seems really loud or is it because of the airbox snorkel has been taken off from my scooter? Will that make any difference im the noise?

[@Scooterswapshop]

Nino Echavez you have to remove it or your bike won’t do over 25.

[@ninoechavez1402]

@@Scooterswapshop thanks man. By the way, what that thing in between the packing that looks like thin wire mesh?

[@pubbiehive]

Removing the snorkel will make your bike way louder and harder to jet properly for pretty much no performance gain at all. Pro tip: there are two different snorkels, one is way smaller and more restrictive than the other. You can tell from the opening that sticks out of the airbox. The restrictive one has a circular opening, the larger one has a more oblong shape. It's very obvious if you look at them side by side.

[@gabersik8247]

Does the exhaust fit on the piaggio nrg mc3

[@Scooterswapshop]

give the shop a call we can see if we can't you something