How to Remove Car Dent Without Having to Repaint - DIY

Car dent repair. How to remove a car dent. Car dent removal and repair without having to repaint DIY with Scotty Kilmer. How to fix dents in your car without having to repaint the area, tricks. Since matching paint color is pretty much impossible, this is often the best way to get your car looking great again. DIY car repair with Scotty Kilmer, an auto mechanic for the last 46 years.
⬇️Scotty’s Top DIY Tools:
1. Bluetooth Scan Tool: amzn.to/2nfvmaD
2. Cheap Scan Tool: amzn.to/2D8Tvae
3. Professional Socket Set: amzn.to/2Bzmccg
4. Wrench Set: amzn.to/2kmBaOU
5. No Charging Required Car Jump Starter: amzn.to/2CthnUU
6. Battery Pack Car Jump Starter: amzn.to/2nrc6qR
⬇️Things I used in this video:
1. Heat Tool: amzn.to/2nrR4Zn
2. Common Sense
3. 4k Camera: amzn.to/2hZ4AxX
4. Mini Microphone: amzn.to/2newgV9
5. My computer for editing / uploading: amzn.to/2i2sKYz
6. Video editing software: amzn.to/2jv5Fhf
7. Thumbnail software: amzn.to/2k7tz6C
🛠Check out my Garage to see what I use every day and highly recommend:
www.amazon.com/shop/scottykilmer
❗️Check out the Scotty store:
goo.gl/RwhRGU
👉Follow me on Instagram for the latest news, funnies, and exclusive info / pics:
goo.gl/ohy2cA
If you liked this video, consider subscribing and press the bell Icon to get updated on the newest repair video every week.
And remember, every TUESDAY I upload a new video on the Scotty Kilmer Channel on KZbin, / scottykilmer
Also, if you like my car help, be sure to watch my live car talk show every Thursday afternoon at 1 CST and Saturday morning at 10 AM CST on KZbin. I answer your car questions LIVE there. Just check it out at: • Video

[@scottykilmer]

⬇️Scotty’s Top DIY Tools: 1. Bluetooth Scan Tool: amzn.to/2nfvmaD 2. Cheap Scan Tool: amzn.to/2D8Tvae 3. Professional Socket Set: amzn.to/2Bzmccg 4. Wrench Set: amzn.to/2kmBaOU 5. No Charging Required Car Jump Starter: amzn.to/2CthnUU 6. Battery Pack Car Jump Starter: amzn.to/2nrc6qR Things I used in this video: 1. Heat Tool: amzn.to/2nrR4Zn 2. Common Sense 3. 4k Camera: amzn.to/2hZ4AxX 4. Mini Microphone: amzn.to/2newgV9 5. My computer for editing / uploading: amzn.to/2i2sKYz 6. Video editing software: amzn.to/2jv5Fhf 7. Thumbnail software: amzn.to/2k7tz6C 🛠Check out my Garage to see what I use every day and highly recommend: www.amazon.com/shop/scottykilmer ❗️Check out the Scotty store: goo.gl/RwhRGU 👉Follow me on Instagram for the latest news, funnies, and exclusive info / pics: goo.gl/ohy2cA

[@luminositymusic3810]

Scotty Kilmer terrific process

[@miguelmazo9545]

Scotty Kilmer .

[@The-real-CrackerZack]

Scotty Kilmer looks like millennials won’t be able to do this.

[@MrOnionDip]

at least we didn't destroy the entire planet for our children's children's children in the name of the almighty dollar

[@Case_]

That dent repair guy is obviously thrilled by the unique chance to appear in a Scotty Kilmer video.

[@rkgsd]

Martin Fiala No he's just not easily impressed by people.

[@ron7926]

in other words NFG

[@kleenexexpress986]

He’s just working lol

[@terrorcottaclayman7357]

Moving Chicane I don't he'll be coming back again. 😂😂bet he's moved business to another state. 😂😂😂

[@mckybb3860]

Hahaha😂

[@shartingfish5761]

This guy is an artist.. this takes a lot of skill and patience, not only dealing with the dent, but also the people..

[@HambogNgSagproKrewofficial]

Lol the guy be like: Please I just want to do my job peacefully.

[@azershotgun]

haha that guy looks like oh god a crazy man with a camera

[@friedchicken1]

***** he was pobably just not too camera happy

[@friedchicken1]

***** I'm a camera and i think i am better than the body artist and the camera guy

[@EMAN-nx2gn]

Billy H. WOOOOOOOOO!!!!!!!!!!!!!!!!

[@DZKNUTZ]

E. MAN WOOOO!!!!!!!!

[@misterxman23]

PDR is a real art. Some people can never do it. This guy will always have a job! Imagine the cash you could make doing this on the side!

[@Igaveyoumyfakename]

On the side of what? (see what I did there.)

[@mackcummy4976]

This doesn't teach how to take out dents, it teaches you to call a guy to do it.

[@cfldentrepair]

mack cummy ...as you definitely should seek out a professional for this type of repair 👍🏻

[@harwoods11]

Know your limitations I suppose 👍

[@danielj5650]

technically he also showed the process for doing it, so if you have the skill go ahead and DIY

[@harwoods11]

@@danielj5650 Yep 😁

[@timbutler6447]

@@harwoods11 Scotty was smart enough to say, "I don't know".

[@carlomorgan1099]

Scotty is the nuardwar of the mechanic industry

[@aleksortega601]

"Some evil swine." 😂 I love the channel Scotty! Been watching for years and always come here when something goes wrong on my cars. I even stop by when nothing's wrong. Thanks for all the help over the years!

[@TexasBoyJc]

Scotty - "Did you ever think about a career in percussion?" Repair Guy - "Ummmm NO" 😂

[@MrTruthislight]

without hesitation

[@contractki11er]

Paintless dent repair guys are magicians.

[@kenzathur]

Scotty, I'm a diesel mechanic, heavy duty and truck and transport. I must say I do enjoy watching your videos, where I work i find a couple videos do help sometimes to get another mechanics opinion on some mistakes, and they are very helpful when it comes to gasoline engines, where sometimes im not the greatest expert everyone thinks I am. Thanks Scotty!

[@jundialhaqiqa9907]

I love the paintless dent removal, I've used them before and they are not very expensive. I'm sure this guy is getting a lot of business now as well due to you advertising him.

[@yenomeerf]

A Real Specialty Trade I didn't even realize existed. Thanks Scotty

[@alexvaviloff5934]

For people, who say, that dent repair guys looks like he is not happy about something. When you have a business, advertising is super important! I dont think he was unhappy or something like that, because when big youtube channel showing your business and work, you cant ask for better advertising. I have small dealership and Id personally be very happy to be presenting my business on such channel.

[@Clearanceman2]

This is amazing, that was a bad dent, not just a tiny ding. And no grinding through the galvanize and having to repaint.

[@amj2020]

Truly an art form, this takes patience beyond my own

[@jessepowers9157]

2:12 he almost got up and left.

[@BmwMe-uh9sy]

Not really

[@christopherdavis754]

🤣🤣🤣

[@0macky0]

Scotty made the dent guy day by making this video never seen anyone happier being asked questions

[@fordmondeo123]

that is superb. didn't even realise such a service existed to be honest. thanks for bringing this to my attention scotty great job. are you still sure you don't want to move to England?

[@aaronanderson1118]

I'M IMPRESSED WITH THE DENTLESS REPAIR...IT LOOKS GOOD AS NEW.

[@otakop67]

The best ability any DIY person can have is the ability to know which jobs are beyond your skill-set and should be left to the professionals.

[@wildbill23c]

its even true for professionals, who know their limitations and call for help when needed. They may be a pro but they may run into cases where what they're dealing with they have not personally seen or dealt with before in that case the pro needs to call a pro LOL.

[@otakop67]

William Todd That's when the pro calls a specialist. :)

[@blackjack444....]

I'll try this at home!! Lol

[@robhughes8516]

If a job is beyond your abilities at the moment it’s not suddenly going to be within your abilities sporadically at some point in the future if you just sit back and proclaim defeat... you learn things you currently do not know how to do by learning to do things that you currently do not know how to do and you do this by doing it

[@justinjay7759]

William Todd LMAOOOO lpp

[@jdogmcnasty1980]

My brother has his own PDR biz, it's seriously a skill. It takes a good 12 mo to learn to do it right and years to perfect.

[@exceldentremoval]

Good to know Scotty Kilmer sometimes DIY is not always possible and you have to call a pro. Though I think he could have finished faster than 2 hours. You always work a little slower with someone watching.

[@funstuff7784]

You Can Juss See On The Guys Face He Didn't Wanna Be On Video LOL

[@2H2521]

By far the best “Rev up your engines!”

[@morganw8682]

Very smart of you Scotty to make a video of the guy fixing the dent. You paid for the repair many times over with KZbin advertising revenue from over 3 million views!

[@MoreGrievances]

That guy's an artist. Great work.

[@user-em6mc7mp9k]

The dent guy wore headphones so he wouldn’t have to listen to Skcotty’s loud yelling

[@Letusbeguided]

Pdr is an art. Honestly amazing some of the dents i had removed for a fraction of the cost of paint.

[@itsnotme07]

Great vid Scott! I had a 95 Ford Thunderbird that got blasted during a hail storm in 2003, and I found a great PDR company here in Plano that made the car look like it had never been hit by anything. Best $4000 my insurance company ever spent!

[@machiav7527]

Scotty is out here living his best life

[@thepolyatheist4151]

I like the look on the Dent Dog's his face at the beginning: "Oh shit.... this is going to get annoying really fast. Where are my headphones." 5 min later "DAMN IT! It's not helping!"

[@101Volts]

+ThePolyatheist He could be using a stethoscope, though I don't know for sure.

[@manuelruiz1049]

That's Hilarious XD

[@nighthawkj30A4]

ThePolyatheist i know lol i saw his headphones. He like I should got the noise canceling ones.

[@PecosHank]

Helping me out. Big Time!

[@forexsniper1164]

I love your videos. I completely forgot about your channel, just subbed. Awesome to find you here of all places.

[@gabrielmesce8641]

Hahah of course I’d run into you

[@jminchella88]

The world needs more people like you Scotty Kilmer!

[@johnbrevard5966]

Love your channel Scotty, as a former Firestone owner I have had my share of mechanics and service writers, You my friend are a true Technician!

[@cyberpunk004]

depending on the level you need the dent taken out to, sometimes a 35 dollar disount tool dolly and hammer set can take out these too. My cars are mostly beater cars and would be a good car for those wanting to practice dent removal to come over and learn the craft on:)

[@dfighternelams6387]

Scotty Kilmer motto: Don't sweat the petty things,Pet the sweaty things! You're the MAN SCOTTY!

[@kj9219]

Learning to read the dent and surrounding areas is a worthy skill. Taught my son how to do it and he just took off with it..

[@shelleehoover1940]

C'mon people! If you like Scotty, pass the word. He deserves 1 million subscribers! Thank you.

[@michaelchitwood6226]

Good technique to perform the paintless repair.

[@kingschnitz]

I love this guy Give him his own show

[@AdmiralAsma]

kingschnitz Scotty or the dent guy?

[@buzztrucker]

I second that. Scotty has so much personality that I believe he would do well on his own show on Speed Network.

[@large_n_widetm2116]

Dude he has won 2 Emmys for being on shows!

[@ScramTek]

AdmiralAsma Yes

[@spacesuitor]

SCOTTY, YOU ROCK! THANKS FOR REMINDING US IT'S O.K. TO SOMETIMES ASK OTHER FOLKS FOR HELP.

[@weldean46]

PDR is a real awesome skill to have, i purchased a PDR kit a couple of years ago and have not had the time practice on a hood or fender, i have had work done on my black Chrysler 300 from a pdr guy and wow what a awesome job they can do, it is really amazing what kind of repairs they can achieve with this system.

[@spelunkerd]

Like most body work, there's a lot of skill behind what those guys do. It would be easy to make it worse, and harder for a pro to fix later.

[@kg4boj]

South Main Auto Repair us locksmiths have a fee like that lol, basically whatever the customer touches is beyond repair and has to be replaced instead of repaired in 99.999% of cases

[@kg4boj]

South Main Auto Repair lol I know that romex thing, look on my channel, the used car dealer used lamp cord to rewire my stereo before I bought it, had spiked several fuses and still couldn't find the right fuse to fix the headlights so they ran the high and low lamps off the parking light circuit which still didn't work because they spiked the fuse but the wire melted..

[@kg4boj]

South Main Auto Repair​ lol small things matter, I saw scotty hit a key with a hammer once to fix a stuck ign and it made me cringe. I do sometimes tap a key to get it going to turn on so I can remove the ignition, but never with anything heavier than holding a screwdriver by the bit end and tapping (very very lightly, less is more remember) the key with the handle... less is more with locks in all manners of speaking. Thats why I named my business "the lock whisperer"

[@kg4boj]

9 out of 10 times anyways I simply re cut the key to factory specifications and the locks work perfectly fine again. But those locks you have to fight with to turn on should never be turned off again until you remove them if they come out like 99% of modern cars. We used to love the pre 94 gm cars because we could remove the steering wheel with non powered hand tools and pull the lock out and replace it in about 15 min and get anyone going no matter if the lock was fubar, gummed up or lost keys... tell me, does your shop service vats equipped gm cars? You must know what a pita that caused, though it reduced car theft by 75% across the usa at the time of it's introduction.

[@kg4boj]

99% of the time it is either the contact springs are worn, or the wires to the ignition are broken on paskey 1 type. They do not lend well to tampering and no one will ever tell you this, but they are sensitive to resistance changes of ~1 ohm and there is no way whatsoever to make a reliable repair on them by splicing or soldering wires. The entire wire assembly must be replaced and carefully fished down the steering coloum before being plugged into the connector under the kick panel. One of the huge problems the system has is that if the system picks up rhe right key and starts, but either one of the wires get disconnected after 60 seconds of the car running, the vats system goes to "sleep" and will re activate when it next detects a valid resistance, or when the battery goes flat, then she won't start til it reads a valid resistance, and if its intermittent it won't work for 3 minutes. Every subsequent attempt to start will add 3 minutes on top of that wait with no way to bypass.

[@Cartershj]

I like ur enthusiasm

[@myfeeling4you]

Top subject Scotty, as a panel beater/spraypainter I'm finding this method to be a cost saver but it's a must to have all the tools and not just pretend anything will do the job, otherwise it will cost more to repair in the end.

[@gl463]

that guy did a really good job. i use them when we get hail in texas around feb-may

[@cigarobsession]

I just snorted at 'Evil Swine'!! LOL!!

[@wilson3707able]

its nice to see a person take pride in his work. good job! !

[@wilson3707able]

Hey Scotty, how much it cost to have this dent removed. Thx

[@rkgsd]

It's amazing what they can do these days without drilling and Bondo. I had a front fender fixed this way about 10 years ago and was amazed. Most pros shops use special lights to help check the accuracy/smoothness at an angle.

[@mikeoreilly7122]

Great description for a hidden skill - even here in Australia. I use these guys.

[@adon31997]

He is GOOD!!!

[@timjones2750]

A true craftsman.

[@tomshaw661]

scotty kilmer is ALLRIGHT!

[@paulthetallsigma1552]

scotty kilmer you would make an excellent cartoon voice over actor!. but excellent advice and a good vid too ; )

[@OwenBochner]

This guy hates his job

[@jackiechan_wtf4041]

A job that requires patience and steady hands, I'll suck the life out of you. lol

[@billybassman21]

+Jackie chan_WTF And worrying they will not be happy with the end result!

[@bmar916]

+Owen Bochner Speak for yourself.

[@jackiechan_wtf4041]

billybassman21 That's when I throw my tool bag that the customers feet and yell "FINE YOU DO THEN!!!". lol

[@BigBoiMo1995]

Not really. As you can see it just needs a lot of concentration and caution. He probably didn't like being on video tho lol that might be it.

[@CyanSkies]

I always wondered how dents were removed. This video was very educational!

[@midninteranger4315]

Thanks Scotty for all your great videos they are all very helpful I watch them all. Thanks Scott.

[@sizzlersshop8338]

Excellent as always Scotty! keep up the great work!

[@TheRiotMakers]

Anyone else thing the guy from Dent Dogs looks like New York Jets QB Ryan Fitzpatrick?

[@jeffreywheat6298]

Come on buddy smile you've got 2 million views!

[@footage6402]

Shut up

[@mancdown]

Great vid as usual Scotty

[@MrPandaKitty220]

The guys from Dent Dogs are great! Dan from Dent Dogs worked on my car before and honestly I can't tell the dents were ever there! and I'm very OCD about my car too. If you're in the Houston area, I would definitely recommend them all day

[@jboom_1368]

Electric space wizard

[@moltar22]

+Justin Boomgarden scotty dont need no bondo to see the wiz

[@henrikaleksandernilsen6388]

+Justin Boomgarden Ah hhaaaaaaa electric space wizard!

[@nicktubara]

+Henrik Nilsen great song from the mcm guys :)

[@dsouzand]

wow that takes a lot of skill and talent.

[@scottykilmer]

dsouzand that's why I made this video, to show people. I could never do it myself, no patience for that kind of small work.

[@carlosdegollado7687]

Anyday...Anytime....if I see Scotty I'm liking the damn video.

[@MattHumanPizza]

I like these quick videos, not all talk like that other channel we all know about on here.

[@shawn1christopher]

Nice, he did one hell of a job. But how much does a job like that run? I'm like you Scotty, not artistically inclined lol.

[@Cragified]

Last time I had it done on a dent that took two hours was around $150. It's practically all labor hour charge and the cost just depends on how long it takes. The big plus is though if the car is young you save the OE paint and clearcoat which is big value retention.

[@scottykilmer]

Cragified 140 bucks in this case

[@shawn1christopher]

Ya that's not bad considering the time they have to take, the labor, and you are saving a ton. Thanks guys.

[@MichaelAChang]

Scotty Kilmer $140 is worth every penny. Sure beats some of the body shop hacks who will charge a lot more only to end up rusting in a couple of years.

[@zawar0081]

Scotty Kilmer For $140, I'd say that is worth it to have your car look good.

[@Thsiscool]

"How did you learn how hard to hit it?" Well, there's multiple answers. However, when you hit it just right, and you hear that "oh god" type of moaning, then you already know that you hit it just right...

[@joshuam.2685]

Damn Skippy

[@dxytona]

I been coming to this guy’s vids for several years.

[@diyunlimited1274]

Love this guy! Thanks for being an awesome teacher!

[@ColtonBlumhagen]

3:08 I see now, Scotty didn't want to mess up his wife's car! lol

[@230910bella]

Man. I see you everywhere. lol

[@billstmaxx]

wow that was some major skill there...any hint on the $$ to fix that Scotty?

[@scottykilmer]

140 bucks in this two hour job

[@xxxkillersandyxxx]

forget the 140 bucks, i just do the job and everyone leave happy

[@xxxkillersandyxxx]

i like car mechinc sim makes me think on simple jobs tasks, you can replace eveyy thing on the car, and all it is a fuel fitter, or air filter

[@xxxkillersandyxxx]

and i like about car sim it gives me problems to solve, like math problems, without useing no math by useing good common sence, and not lieing to ourself

[@xxxkillersandyxxx]

mechic sims reminds me of work at jobs also, the job part is mess up doing to job is good, now they screen you they certifie you they lable you and i dont have nothing, as i am working there people have have to sertifications, there compley dumbass and really dont know what there doing, and i am a dumbass and know i am a dumbass figure things, if had a chance to figure out thing i could make it , but have to bow down to managers that dont really know what there doing,

[@ramonmunoz7617]

Scotty I went to PDR school and it's not easy it takes a while the pdr guy can tell you LOTS OF PRACTICE

[@jhuntosgarage]

Thanks for sharing Scotty. Great topic!

[@ryandaddy2044]

So scotty you paid another guy to provide your wife with happiness?

[@scottykilmer]

didn't last long, cause some swine in a walmart parking lot crushed the same fender with a truck and insurance paid for a new one and bumper

[@andybonbons]

That swine must have been my father. He seems to love fucking people over with false promises. Like the time I never went to Disneyland or when he said he'd take me out to play some catch.

[@appletree8441]

At least it wasn't the pool boy.

[@snight01]

damn.. that car needs oprah

[@smartchip]

Scotty Kilmer great work, you got me interested in mechanics again,

[@bpaper270]

don't get mad get glad

[@fred5149]

very complex and great craftsmanship

[@shawnpa]

I didn't think it could be done.Nice job and video.

[@sigicoria7699]

what's charge on a Lil job like that

[@DANIELSTv]

160

[@iBrrocck]

That guy looked like he gun knock you the fuck out lol

[@CookingForBusyPeople]

Very Impressive and unique technique~DEFINITELY worth trying!

[@rcmen2637]

I love your videos man!!!!!! Great job!!!!

[@1965ace]

It takes about 5 to 7 years of full-time practice to become a good professional dent technician. Be careful who you go to for this type of service.

[@joshuam.2685]

Who says ? What about .. "The Natural" .. 😏

[@josephmastin38]

holy fuck Ryan Fitzpatrick

[@scottykilmer]

na, this guy did a much better job than Ryan ever did. Heck, this year Ryan was the only quarterback in the NFL rated lower than that bum Osweiler for the Texans.

[@Domthedominator7]

Scotty Kilmer wow, Osweiler can't even escape getting roasted on an auto mechanic's channel. Are you a Texans fan, or did you stop rooting for a team after the Oilers left for Tennessee?

[@scottykilmer]

Sadly, I can not root for a team that has an owner who knows absolutely nothing about football and continues to support possibly the worse GM in the history of the NFL. Why anyone would keep a GM that has made so many blunders, yet fire all the other coaches over time is beyond me. And let's see, he fires Kubiak and Phillip as coaches, and a year later, gee, they win a super bowl in Denver coaching the Broncos (AND, look at their GM then, John Elway who really does know the NFL). So really, I have no hope for them at all with the present owner.

[@jcampezzi1027]

Go Cowboys !

[@floki5605]

Scotty Kilmer Couodnt agree with you more. The new quarterback looks promising.

[@Pfsif]

I've done dents before and that was a NICE job.

[@rickreid81]

Thank u,you are always very helpful and informative. !!!

[@TheKyleRitchie]

Dang, wouldn't the labor have cost more than just getting a new fender?

[@scottykilmer]

+Kyle Ritchie obviously you don't live in houston and have never paid for a new fender and then having it painted and the paint doesn't match the rest of the car then. It costs tons more, on this car, 700 bucks

[@TheKyleRitchie]

I wasn't trying to be rude, I was just curious.

[@huzaifa1997]

+Scotty Kilmer You just dont know what kind of cars we get repaired here in our country and paint matches 95% of the time. Repair is pretty cheap here.

[@scottykilmer]

+Huzaifa Haroon sure, but I'm in Texas, and body work here it pretty expensive due in part to government regulations kicking out all the little guys doing it in small garages

[@huzaifa1997]

+Scotty Kilmer yes, I've heard that the government regulations are very strict in the U.S.A. Here, mostly accidental write off cars are imported, repaired. Fiber replicas dashboard and steering installed to cover blown airbags. Sold as all original. Check out my thread Accidnetal Jdms exposed on Pakwheels to get an idea of how expert people we have here to repair the cars :D and How we paint cars in open air

[@tony1572]

DIY - call a guy who knows how to fix the dent

[@larryleisuresuit9584]

That was badass. i will learn this. LOL I have plenty of messed up cars to practice on. i am off to ebay and where ever else i need to go to buy cheap tools to push and pull and bang with. this will be a very handy thing to know how to do. Thanks again.

[@sugarandpie]

Wow never thought that would be possible - thanks for sharing :)

[@erodmedia5028]

What was the cost for this?

[@scottykilmer]

160 bucks

[@DAIadvisor]

For 160 I can buy a new fender. In fact, I can buy 2 fenders. :)

[@Drivermod_Josh]

Okay, but what about paint and labor

[@DAIadvisor]

+Josh427SS you're right. some cars are more expensive than others. But for common cars, you could find the right color fender and its only a few bolts to take it off.

[@Drivermod_Josh]

DAIadvisor Even though the car might share the same paint code, it might wear down differently and be completely noticeable

[@FEETLE]

ohhh Scotty !!! you could at least give him some free advertising like a phone number at least

[@scottykilmer]

they didn't want it

[@jackonakh1]

Great Job! I like your show. Unfortunately, my car got repaint all over, esp. touch up on the doors.

[@4twowildkittycats]

Thank you Scotty your info was fantastic. All your videos always help someone sooner or later. I love working on my own vehicles. Some, pencil pushing people who can't seem to get off thier secretary spread asses and work on there own vehicles and cause trouble for no reason are just jeleous, just ignore them their vessels fitted for destruction anyway. Love you Scotty,💕 thank you 💃💃Now where in N. California do they sell these little suction cups at? Home Depot I hope Got 2 remove a ding/scrtch someone t-boned the little panel right under my vans side doors

[@frankielugo1009]

I see Ryan Fitzpatrick finally found his true calling. NFL QB was not it.

[@AwakeDude911]

there's always 1 smiling guy at the end of any job done by a Professional ....

[@318lotis]

Hi Scotty, about that dent, I didn't think it was that bad and after a few drinks, I thought I had better skedaddle on out of there. I did leave a note under the wiper.

[@dixoncider7256]

Amazing work!