Scout Hemisphere Performance Fuel Gauge Assembly Instructions

Here are the steps needed to install our fuel gauge for the Indian Scout Bobber.
Installing the Hemisphere Performance Indian Scout Bobber Fuel Gauge kit is very easy with only a few main steps:
1. Drain and remove the tank
2. Remove the fuel pump
3. Drill one hole in the fuel pump flange, and install the fuel line bung. Or, use our optional ready-to-install fuel pump assembly
4. Splice 2 power wires from our kit into a keyed power source like the license plate light
5. Tuck our sensor assembly behind the ignition cover plate
6. Route your cables and small controller box to the front of the bike, replace the tank
7. Slip on the fuel gauge bezel, connect the controller connector
8. Fill the tank with as much gas as you want in there when the gauge reads "empty".
9. Plug in the calibrator module. Turn on ignition to "accessory" position. Press "E" calibrate button. Add gas to fill the tank. Press the "F" calibrate button. Disconnect the calibrator module.
10. Done.
www.hemisphereperformance.com
/ hemisphereperformance
/ hemisphereperformance
Join our Customer Design Feedback Group for early access to new products, and to help us with our new product R&D by sharing your opinions: / 963399101213383

[@FatTopG]

Great video, def learned from this 😃 you just hurt my feelings when the tank was placed upside down on that bench with no protection 😅

[@hemisphereperformance]

We didn't feel bad....you didn't see the big honkin' dent on the top side from the previous owner's lowside tank slap. :) We have another tank that was recently powdercoated to match our sidecar (also gray), that will eventually find its way onto our test bike later.

[@FatTopG]

@@hemisphereperformance thought there was more going on with that tank 🤣 Ty for clearing that up 😃

[@pharoah1200]

@@hemisphereperformance yeah I was wondering how that happened.

[@Frogman172]

You did really well explaining and showing video. I can totally do this with this video! Nice Job.

[@jeffcowell3935]

Great detailed video instructions, I’m talking one of the best for the Indian Scout out there. Would love to do it, but I think it’s just much easier to remember when to fuel up. I’ve added most of the OEM add ons, but going to pass on this one. A+ for effort!

[@drlt9241]

Expensive af! But I've been looking for one for years!

[@csh3304]

Wow, Awesome!

[@rodneyrogers3023]

I had it installed on my bike, but the needle keeps going all over the place while I’m riding

[@lemueltorrescrispin8095]

Will you make a special order pleaseeeeee🎉🎉🎉😢😢😢 i looked on you page didnt find it

[@boberios4439]

Grate vídeo!!

[@cointooth3552]

Do you know if it Will fit if I already have the tachometer?

[@theblastermaster5590]

Do you have this for the new Chief (2023 ABS)? Seems almost the same. Mine has the analog speedo not Ride Command.

[@antoniobalderas4487]

What’s the part number for this ?

[@lemueltorrescrispin8095]

If I make special order will this fit with the chief fuel gauge ???

[@MastaKeahi]

Is there a way to get the gas indicator to work with the stock gauge cluster since it has the indicator in the LCD screen?

[@gregwarner9624]

if i use that i cant put a tach on it?

[@slaytanic921]

I already have my tach delivered. If I could do both. That would be sick

[@DonMachado]

@@slaytanic921They made a dual bezel that would hold the tach and the fuel gauge (one on either side of the main instrument cluster). But I'm not sure they make the fuel gauge any longer.

[@fmrs-festivalmusicaldaresp1771]

Hi, where can I get a fuel gauge like this?

[@jayeparker9281]

how to hide the wire bundle on scout sixty

[@hemisphereperformance]

There is some flexibility in how to dress and manage the slack, it could be moved back and tucked under the tank and seat more than what is shown. We are spoiled by the nacelle on the Twenty.

[@gregwarner9624]

i waited too late and they quit making them. i just lost a lot of respect for them.

[@ursg9910]

500$????!!!!!!🤬mark up for Indian after market is crazy I would pay 300 at the most. Come down on the price and I'll buy.

[@hemisphereperformance]

Well, that's fair enough, everyone has a desire and price point in mind. We need to make back the significant investment we've made here, and note that we are CNC machining the bezel from a block of 6061 aluminum which, by itself is not cheap to do. Plus the other components. Sorry we can't meet your price point on this, but we hope to earn your business with our other products.

[@DonMachado]

@@hemisphereperformanceYou'll make your money back faster if you lower the price since a lot more people could afford to buy it.

[@jlee111776]

It's too expensive. I understand your need to get your money back... but honestly... it's cheaper to remember that the bike only gets 110 miles to a tank of gas... the look isn't worth the price point.

[@soufilms]

Gauge overpriced, should match the OEM backlight and black bazel , this one doesn’t look good. But those things should come out of the box really

[@johnmarklujan]

wtf!