I Put a CORVETTE Motor in My Brothers PORSCHE 911

[@scraplifegarage]

Go to buyraycon.com/scraplife for 15% off your order!

[@hahaha9076]

Inspired. Subscribed. 800+ hp in that car will be awesome. I'm thinking of an Ls3 into my 986s boxster. The m96 in it has no modification support because it's a poo engine. There's no point rebuilding it to turbo or leave NA. The cost is ridiculous. Did you say where the kits are available and I missed it? Jon

[@williamfrater9862]

I have my mine LS3 That needs the camshaft

[@csphar6350]

Thank you

[@MrTopdog4837]

I want the shaft please😂

[@shawnlibby4762]

​@@williamfrater9862 I want to do a 4.8 l s Crank swap it into the 6.2 LS3.... Yeehaw....

[@Pboy7272]

Man, huge respect for your skills and knowledge. Is a lot of fun watching you both tear down and build the motor. The sound quality is on point!

[@tkostang]

I want the shaft! Still!

[@JonathanLittle001]

Oddly cathartic lol

[@Viking8888]

I love a good LS swap! Can't wait for episode 2!

[@ViperMods_216]

It's crazy how much of a massive improvement the LS is in that chassis

[@MaciusSzwed]

How can you know its an improvement if the car aint finished and they heavent driven it on the street nor the track? We dont know anything!! That stock gearbox will brake in to a thousand pieces when they put turbos on that engine!

[@masonshafer811]

@@MaciusSzwed lol they aren’t the first to do it it’s a solid swap

[@Agent_Clark]

​@@masonshafer811 surely that anchor would change the way it handles

[@MaciusSzwed]

@@masonshafer811 Lol fool, I know people that did this in the 80-ties!

[@jeremymckinney2269]

@@Agent_Clark the LS engine weighs almost the same, if not less, than the flat-6 that it replaces.....every person I know that has done the LS swap says that the back end feels the same and that the balance isn't that much off before doing suspension adjustments.

[@gezdipz5425]

Seen this done b4 but not with turbos it's a whole other level,keep the content coming it's awesome 👌

[@TLLC2024]

In addition to, wow what an idea, thank you for having such an organized shop, seriously.

[@torontoyes]

I love how organized their shop is.

[@edwardshaylitsa7127]

Same!

[@skylerjones2302]

it’s so satisfying watching y’all just rebuild motors!! also i want the shaft

[@basilmeier9677]

I love how he just gets right to the point doesn’t take episodes. Also I want the shaft

[@boastyy]

Awesome look forward to seeing it running, going to be a beast!

[@Weidjeep]

Can't wait to see the finished product on the LS swapped Porsche

[@billpar]

it is insane how much I love this video you guys are killing it very exciting thanks for great content

[@ZoomStranger]

Insane? Can't you just say "yep, liked this a lot, will be back for more." . .

[@blurple36]

Great choice with the CPE components! I have a 996 CPE car and I love every little bit of it.

[@gd1996]

Lots of parts/money put into it, I would have at least put in bearings and likely forged pistons/rods too. If your going to have twin turbos, might as well be able to take advantage of the boost. Seeing metal has been in the oil from the cam, at least check bearings.

[@PapaWheelie1]

Looks like they have a few spares on the shelf

[@Johnnytotal]

I have to see the rest of the installation on this Porsche. Great video guys!

[@ss-5553]

Nice to look how you open and fix the LS3 motor. Nice project put that in the Porsche.

[@bobdobalina8910]

AWEOME! I had the Lottery, I would have one in my Drive way and go to Porsche Shows with a BIG Smile.

[@capitalironic]

I want the shaft 😳

[@yudigg7]

⏸️

[@reesemch2o635]

That’s what she said

[@jacksavage2612]

Huh

[@reesemch2o635]

@@jacksavage2612 it’s a joke.. you never heard that one?I know you were replying to the post for the camshaft

[@Liberal-B-douchebags]

You heard him! Give him the shaft!

[@HowDareYouu]

This ain't a real Porsche anymore without it's original Porsche engine. This is a PorschVette

[@kens8903]

This is the only Porsche content I can stand to watch 😂

[@hhgarage6393]

Totally awesome to see in person, can’t wait to mount mine in my 993 this week.

[@capitalironic]

You know i want the shaft! 😅

[@Airdown]

Nice work on the sponsor integration 🙂. Regardless of who the sponsor is it's nice to see a channel do more than just read off a blurb

[@limesta]

Since the rear motor plate is on bushings, I suggest adding a secondary support up top after you have your intake piping, since it might flex a bit, maybe the bottom takes care of most of it, but it might help if you're getting weird weight transfer behavior

[@PaullieProductions]

Your guys video helped me get through a very tough time today. Thanks!❤️

[@mikecrystalrobert7898]

That’s impressive that’s a huge motor into a small space 👌should be a monster

[@jamess4535]

You obviously haven't seen a 997 TT dropped from the pan, it's essentially the same size.

[@lorddoobsworth144]

ls engines are very physically small and light for their displacement, one of the advantages of pushrod engines :)

[@Sparkyspage]

Hoovies Apollo 911 comes to mind. His seized due to not having a baffled oil pan. LS was not intended to be backwards and sloshing around that way.

[@robertferrell7234]

Man im dying for the next video on this car. Im tackling this swap in the next few months on my C2S and this was a huge motivation boost to complete it.

[@scraplifegarage]

Awesome! Any questions feel free to reach out I’ll do my best to answer!

[@johnnyohness]

Fantastic video. Boy did I learn a lot. But where is the conclusion of this project and a test run.? Am dying to see the rest of it.

[@capitalironic]

I want the shaft 💯

[@renzah8790]

Excuse me?

[@Hacker-cw9lc]

Ayo

[@rast4man]

I WANT THE SHAFT! Can't believe you guys are doing this swap, probably the coolest thing I've seen yet!

[@matsisaksson7192]

These shows are absolutely fantastic. Is the part 2 out yet? I can not find it. Incredible accessibility to the V8 from below, spark plugs and exhaust.

[@smulderphotography2145]

Awesome video! Long content but not long winded 🙌🏻

[@capitalironic]

I want the shaft😊

[@stevefarrington5618]

I hate to say this but that sounds kind of G.

[@xmo552]

That's what she said. Usually in the back door. Life is good.

[@hannoversa708]

Top Top Top Porsche 911 V8 😮

[@Sergeantgrunt]

This really makes me want to find a car that has a blown engine and swap it out for an LS! I've seen this a few times and the more I see it, the more I want it!

[@tomw6719]

I'm a Porsche fan but I really like the swap, thanks!

[@BayAreaCowboy]

May I ask what happened to this car? When will you make a follow up video on it? I’m looking forward to seeing how it runs. I think the LS swap in these Porches are the ultimate!

[@dailylife3975]

I seen matt a KZbinr in one of his videos drive a porsche with a coyote motor in it and it was badass. Matt said it was amazing

[@jdwood8496]

I want the shaft! Loving all the crazy rebuilds and Corvette content!

[@douglaschitwood1342]

The car is worth millions now, coolest build i have ever seen. Thank you all for this one.

[@capitalironic]

I want the shaft!

[@crazestyle83]

Cradle the balls and swallow the gravy?

[@bobbycuesroadhouse2204]

Can’t wait till part 2! Great content guys

[@steelwheels327]

Great editing ...no BS!! that motor went in really nice , what's weight difference between the LS & boxer?

[@TrojanLube69]

Prob around 70-90. Equivalent to adding half a male inside your trunk 😂😂😂

[@ViperMods_216]

Probably not much

[@ziqrsx]

the boxer has 6 cylinders and is angled 180° in a flat shape, the LS has 8 cylinders and is angled 90° in a V shape

[@TrojanLube69]

Well wait It actually weights less than the porshe. From what I saw on some forums. The Porsche engine is an average of 450 lbs for early versions. The ls3 is an average of 430 lbs. Without accessories, engine assembled mass only. 😂

[@peterb4143]

@@TrojanLube69 I believe it, I think people don’t realize how compact and light in weight for being a V8 an LS is. Coyote motors are huge even next to a 7L LS

[@chrispainter2121]

Literally counting down to the next video! Very cool, always enjoy your videos, mad respect from the UK

[@c5doob]

i’m sorry you did WHAT

[@BanksRacing11]

Just a tip on the valve guide seals use a extension and socket and push them on by hand should go one fairly easy with some lube.. Keep up the good work..

[@anthonyrichard461]

Huge challenge, how much more weight did it add and did it compromise the handling?

[@AlexTheMechanic]

Same weight as a stock flat 6 NA engine .. 200 lbs lighter than a 997 turbo engine Center of gravity is a little higher but i cant say about handling since i havent done it yet .. but getting ready to do it next winter in a 996

[@WilliamCollins-sh6lm]

Had an old Ford van I did that to . Plenty of HP excellent fuel mileage . An fairly cheap to do !!! A balanced blueprinted small block 400 About 430 horse . Would smoke tires at 35 mph until I let off . Dana 60 posi. An overdrive trans is only thing I can think of ... People just don't think of a van as fast but this was !!!

[@kolliinn]

Mark your calendar Dalt, April is international “Nissan Juke hate month”

[@scraplifedalt]

hmmmm, it's on my calendar as "ignore anyone whose name starts with K?"

[@kolliinn]

@@scraplifedalt that’s May silly

[@RadRelics]

This is quickly becoming one of my favorite car channels on youtube.

[@2exiw]

I really hope you put lock tight on the motor plates 😮

[@PapaWheelie1]

I would tell myself that it will probably have to go in and out a couple times to get the turbos on - but forget to lock tight in the end 🤣

[@STR8SHOOTER1000]

Your boy got some welding SKILLS!

[@TreVox]

These kinds of mods are underrated. The 911 is a beautiful and brilliant car.

[@GeoTrashPanda]

"I WANT THE SHAFT!" lol

[@maxmazariego9076]

Hi guys, I'm very happy to see knowledgeable mechanics for sports cars! I'm going to start fallowing your show and thank you for sharing! Cheers

[@dkjens0705]

I really like the welder, he's cool. You really can't get more than about 400HP out of an M97 engine rebuilt to 4.2 liters (which makes for a fantastic car) so if you want more HP and you're not a purist (no 996/997.1 owners are) then by all means swap to a simple Chevy engine. I would R&R Porsche engines singlehandedly all day long including tubos and often you'd have 1cm/1/3" clearance between breaking shit and not ha ha. The $500 lift table from Harbor Freight is a great help in engine R&R on Porsches.

[@fredbrackely]

OOOh that's a nice install. Awesome job lads.

[@peterc3143]

What a beautiful weapon There’s just something special about the 911 shape 😍

[@Jgvlogs2024]

man i can’t believe they are putting a ls3v8 that is really cool that they are putting the ls3 v8 on a Porsche now that is bad ass i love there content on youtube

[@flybobbie1449]

Nice to see these conversions. I put Ford engine into Mazda RX7. Wish i had workshop full of tools. All i had was a few spanners, hacksaw, stick welder and hand drill. And some 1/8 plate. I did have an adapter plate made by drawing out the rear of engine and gear box on tracing paper and had it flame cut out.

[@csphar6350]

" I Want The Shaft !?!? Please ? - C -

[@perarduaadastra873]

Owner of a 928 GTS Manual for 20 years, and always fancied a V8 911. Sold my 993 Turbo 4 because it was too dull in 4WD. It had the factory stage 2 kit with 450bhp. Turbo lag was a bit too much and the exhaust note not not vibrant enough. Beautiful to look at though.

[@Twilight110370]

Never seen anyone work so fast you guys are awesome 🔥🔥🔥🔥💯💯💯💯great show 👍💯🔥💯🔥

[@calibeachbound]

where can I find the next video and see the finished build? Looks great so far!

[@sambecker2045]

Great video. My friend Brett put an LS3 in his 240SX. All of you guys have skills and it shows you have experience. How about a big KZbin sticker over the brand name on the lift. Love you guys!

[@Eduardolo1964]

Great work. A V8 in a 911 has long been my dream. Greetings from Switzerland

[@alexmartin9951]

I wouldn't have believed you if it wasn't filmed. Nice work

[@johnbmw550i]

Why have you left 97K pistons and ends in that engine??????

[@ask4george1]

I gotta see the rest of this. Freaking Awesome !

[@curtcoeurdelion]

Finally a proper motor in these kit cars!

[@selintungful]

This is soooo sick. I wish my motor swap went this smoothly.

[@rodplumb9805]

Great watch, two concerns, this is a 911, LS3 motor sits way higher in chassis moving centre of gravity north!! This will compromise handling!! You mention the importance of cleaning the head bolt holes and block faces, no mention however of the extremely important removal of the resultant fine metal filings laying in the motor’s oil galleries from the worn cam lobes which will destroy the new internals!!

[@davedavidson9638]

Well Done! You guys made that look easy

[@1PITIFULDUDE]

A 911 without a Porsche flat six, is a soulless 911. RIP my lady.

[@VS666]

I'm sure you're aware but Comp makes air cooled turbos as well, super nice in tight spots like this

[@scraplifegarage]

Yes. I opted for coolant cooled because it would be easy to cycle it in, and this will be a street car that gets driven alot. Given the proximity to motor heat, we decided it would help!

[@dannymccarty344]

Cool car! I love that color! My brother put a jet engine in his Mustang last spring, and the chicks really dig him.

[@Manic-Mechanic]

B.O.H.I.C.A = Bend Over Here It Comes Again ! Give Me The Shaft ! LOL !

[@freechagosislandjohnpilger]

Thats a very good swap kit, kudos to those involved

[@RandyJM21]

Thoughtful brother, you must be close and really love him . I can't think of too many things nicer one could do .

[@richrosario5741]

😂😂😂 I want the Shaft 😅😅😅. Great video guys.

[@Schlipperschlopper]

Due to the BABVVO and TEBBVO laws, all petrol cars will unfortunately soon be banned from public streets in the EU, CH USA and Scandinavia :-( In Germany, the Green People's Party has given the order to shorten the fuel supply from 2025 by reducing all conventional gas stations to just one state-run central gas station per city or county Now they even want to slow down all gas pumps by 20 liters per minute to 2 liters per minute... From 2027, some car spare parts will also be banned in the EU... such as exhaust systems, turbochargers and even some engine and gearbox oils. .. California and New York will do the same from 2027... So no more investing in petrol cars... They even created a new type of crime here called emissions and smoke crime . "Bundesabgasbespaßungsverbotsverordnung" BABVVO in Germany and HESCHLAVVO in Switzerland.

[@andrewwalker3055]

I have an 85 944 with an Ls in it. Just got it running. Can’t wait to drive it!!

[@InCountry6970]

Great project and on a side note, superb video work.

[@wuroiz8848]

I want the shaft! Just found you guys and I love your content!

[@marktemplin1159]

The Porsche mean while is like hey,, hey, what are you doing to me,, hey this isn't in my contract,,,

[@WayApp]

This is a mind-blowing collaboration of two automotive legends. Kudos for pushing the boundaries!

[@rickybailey7123]

That's going to be maybe the best fastest car combo ever that's the most bad ass car all in 1 that I've ever seen!! Let the record breaking Begin I don't think the race tracks are gonna be ready for The Times!!

[@Steve42098]

I love that SWAG bandsaw holder!

[@MrInstinctGamer]

viper swapped S-chasis? LS Swapped 911? This has got to be the channel with the best content on youtube rn.

[@NBC_NCO]

This used to be a fairly common engine swap with the air cooled engines to much more reliable Chevy 5.7ltr. Nice to see it done with the modern car and engine.

[@junktionfet]

Man, watching the motor build footage was therapeutic for me

[@GeoTrashPanda]

DUDE!!! after watching how their shop is setup with how organized it is, I want to work here!!!!! seriously, are you guys lookin for help? lol

[@GeoTrashPanda]

...........watching how nice their shop is make's my ocd happy...............lol

[@operatoreng]

​@@GeoTrashPandatool box makes me want to go throw mine away and start all over. 😂

[@GeoTrashPanda]

@@operatoreng I know, right!

[@NobodySR6]

OMG, I want the shaft 😱 I love this swap 😁 let’s go episode 2 ✌🏼

[@seanmcgibbon6900]

I want the shaft!! Lol 🤣 great work guys!

[@jerrylambo9467]

O shit this is so Epic, Corvette motor in a Porsche I've got to see this. ❤🍿🎥👍👍

[@sgttombailes3380]

Dang Guys.. Outstanding build !

[@BradVentureAZ]

i want the shaft ! just found your channel, i didn’t even get half way through the episode, and i’ve subscribed looking forward to falling down the rabbit hole 🤘

[@brianreid5891]

Good stuff guys! Thats gonna be fun! 👍🏻

[@louieluis8840]

Since its a front engine to the rear or the porsche, would the car now runs backwards?