Scrapping LED Retrofit Lights - Is It Worth It? Pt 2

In today's video I finish the breakdown of the LED lights and see if it was worth it. Thanks for watching! #transformers #electric #electricmotor #recycling #scrapping #scrap #copperwire #aluminum #diy #projectshopfl #copperking #led #ledlights #lighting #generator #statorwindingmachine #electricmotor
Support the channel by subscribing: / @projectshopfl
Subscribe to my 2nd channel The Free Human Project:
/ @thefreehumanproject9387
Email: [e-mail]
Fan Mail:
7040 Seminole Pratt Whitney Rd, Ste 25-111 Loxahatchee FL 33470
Music: Mixkit.co
Bensound.com

[@robertmandigo7942]

Derek there is a KZbinr that converted an electric kiln to gas but he used four burners in it, his channel is Cody's Lab and the video is Electric Kiln to Gas Furnace. He melted aluminum in ten minutes and bronze in fifteen minutes using four burners. Also those oil burners you have do have a pump on them because they are the same setup as what they use in an oil furnace and with the right nozzle you can burn waste oil the important thing is you have to filter the oil or it will plug the nozzle. Keep up the great videos and God bless you and your family.

[@ProjectShopFl]

Thanks for the info

[@MatthewK863]

Love the fact that you break everything down by the numbers. Margins can be tight in scrap and you got your booty covered!

[@ProjectShopFl]

Thanks!

[@nicejunk666]

Thanks for the shout out looking forward to the next one

[@ProjectShopFl]

No problem it was great having you on

[@peteoneill5799]

Great job with these 2 videos. Very thorough breakdown.

[@ProjectShopFl]

Thanks!

[@silverlicious2086]

$49/hour. Not bad, especially once you found your groove and knew what to look for. Appreciate the shoutout at the end of this video for being a moderator. No problem. I enjoy helping on the Live Streams and giving you feedback. I have an Idea for the live stream give-a-way. I will email you about it.

[@ProjectShopFl]

Thanks!

[@shanegenx7519]

i’d like to see what lunch was then be a fly on wall seeing u and steve have lunch

[@ProjectShopFl]

😂😂😂

[@murlbailer3755]

Years ago I found a Philips screwdriver that half the tip was broke off. Cut it off and made a punch,worked great. Never saw another one like it. Handle was thick and so was the shaft. Had to be old? ✌️

[@ProjectShopFl]

I love old tools. lol

[@patrickswagger]

What's up bro, happy scrapping from Birmingham Al.

[@ProjectShopFl]

Just trying to hustle. lol

[@ethanwilson1001]

LEDs seem worth it if you can wait to accumulate around 100lbs and have a station to break it down (shrapnel shields of hung cloth or vinyl shower curtain). Using drywall screws to pull out the screw plugs may help the stubborn ones (screw one in partway then pull out). Peace!

[@ProjectShopFl]

Thanks for the suggestion

[@charlespaschal25]

Make a tool to pull the rubber plugs. Something like a sheet metal screw in place of the bit on the end of a screwdriver.

[@ProjectShopFl]

Thanks for the suggestion

[@Yadhav28]

Please do a micro scrapping video

[@ProjectShopFl]

Ok I have a few coming.

[@myfastcars]

If you crush those black tar bricks in a hydraulic press, it might separate all the components easier and all at once.

[@ProjectShopFl]

Thanks for the suggestion

[@murlbailer3755]

Axe time 😂. 👍

[@ProjectShopFl]

My favorite time. lol

[@greekgods3399]

love it

[@ProjectShopFl]

Thanks!

[@bettymorgan4909]

Up here the 4h has electric recycling. A company picks it up and gives 4h money.

[@ProjectShopFl]

Thants cool.

[@bettymorgan4909]

You could auction something off to generate some needed funds. That is if its allowed.

[@ProjectShopFl]

I think that's a great idea.

[@charlesyates6687]

The black butal inside ballest and drivers you freeze then hit with a hammer and it shatters like glass ixposing all parts and peices in seconts

[@ProjectShopFl]

Thanks for the info

[@aelectric3513]

That's a lot of work for a couple penny's

[@ProjectShopFl]

I agree

[@thefabuloussaneone]

We need to certify scrappers in America. I can't tell you how many times Gate motors have been stolen from the Ground by unpapered scrappers, also they like other peoples catalytic converters or anything that not thiers !

[@ProjectShopFl]

There is a big difference between a scrapper and a junkie.

[@Kreacher1974]

My yard will give me dirty cast aluminum even if there a tiny piece anything else on it.

[@ProjectShopFl]

Thanks for sharing

[@Monkey-boyo_0]

ive never seen anyone write their 5s from the bottom lol

[@ProjectShopFl]

I'm slightly retarted I do lots of weird shit. lol

[@Monkey-boyo_0]

@@ProjectShopFl lmao don’t feel bad I am too

[@MrTomb1976]

I sell the boards like that for $.40 a lb

[@ProjectShopFl]

Thanks for the info

[@curtispederson9390]

Someone said to freeze them then they will break apart.

[@ProjectShopFl]

I said that a few years ago. lol

[@daaam2160]

Dude, make sure to cement in that insulation in that kiln. You wont need to worry so much about mask. Its nasty shi+

[@ProjectShopFl]

Thanks for the info

[@dennishinkle5010]

Some more chinesium

[@ProjectShopFl]

😂😂😂

[@chrisjudd8576]

Damn bruv, your handwriting is worse than mine haha and mines bbbaaaaaddddddddd lol

[@ProjectShopFl]

Yea I'm a mess. lol

[@chrisjudd8576]

@ProjectShopFl lol I couldn't have found a better word for my self. I'm just a mess lol

[@andrewcooper8980]

Ok I’ve seriously had enough of the micro scrapping.

[@bigbam_bam]

Well good news is Derek makes whatever content he wants! Love watching any of your videos that you put out bud! Keep em coming

[@ProjectShopFl]

Ok glad to hear that.

[@SuperRashead]

What a mess! Hope your back is better? This video was not as good as many of your others! Sorry. But all that cleaning you should do after!

[@ProjectShopFl]

Thanks for the tips!

[@iffy9776]

I've had even bigger electronic transformers. I personally don't think they are worth taking apart.

[@ProjectShopFl]

Thanks for the info

[@thefabuloussaneone]

Scrapping should be Americans only, not border crossers.

[@ProjectShopFl]

😂😂

[@shadyehab-zx9fq]

junkman5000

[@ProjectShopFl]

👍