this is the funniest video love it.... and we even learned too way to go!
@jamesallen6426 Жыл бұрын
I got it working on windows. Kinda. I had to relaunch Scratch a couple of times like you did. And I could get the Tello to lift off... but it didn't seem to follow my other code blocks at all. Do you know if there are any good guides out there?
@How-to-by-Lou Жыл бұрын
usually after the 3rd time things start to sync but there tends to be a delay in commands - so if (m) moves the drone forward don't press any other keys until it moves in that direction. It can't handle multiple commands at a time
@NubianQueenVibe8 ай бұрын
Great video! The software still has some bugs. Like executing commands, and having to restart every program launch. But I'm going to try and figure it out.
@How-to-by-Lou8 ай бұрын
It's the only downside. seems to be a lot of troubleshooting with the scratch software.. When it works it works and when it doesn't work, well ya know
@Rohislive10 ай бұрын
bro please help me see i got project of scratch to program the drone and the drone is same you have (tello) .so my sir gave the files in pendrive but when i am trying to open these files these are not opening . It's saying opening sprite .I think i dont have tello extension that's why it's happening is there any way i can donwload tello extension without having drone connecting it to my laptop as the drone is in school
@How-to-by-Lou10 ай бұрын
If you throw the files up into GitHub or we transfer I can try it on one of my computers and throw solution on KZbin for you wetransfer.com/upload
@Rohislive10 ай бұрын
@@How-to-by-Lou thanks bro for replying you got a new subscriber ok do you use Instagram if you use then like I will send all files to you there and then you like open it on your PC and after opening can you send me its files then
@Rohislive10 ай бұрын
@@How-to-by-Lou and please bro help me because I have to like learn the codes so please help me as soon as you see my message
@Rohislive10 ай бұрын
@@How-to-by-Lou see the link which you gave me of we transfer so should I transfer the files of scratch there?
@How-to-by-Lou10 ай бұрын
@@Rohislive send the files via we transfer link ….once you create a link you can email them here drone.imagery.nj@gmail.com
@casscholten34399 ай бұрын
When i openend the Scratch3-Tello app it says: The code execution could not be continued because FFMPEG.dll was not found. You can fix this problem by reinstalling the program'. i treid reinstallng the app and that doest work. what should i do?
@How-to-by-Lou9 ай бұрын
It's a tad tricky since you are working in window the solution could be aa tad complex. But if you are comfortable in troubleshooting you could try 1 of these 5 solutions.. Hope this helps...www.partitionwizard.com/partitionmanager/ffmpeg-dll.html
@microsoftbizappsfico Жыл бұрын
Hi, Can you use scratch to make photos? I cannot find the control for making photos in scratch.
@How-to-by-Lou Жыл бұрын
you can using the tello edu app but it would be done from your ipad or mobile phone.. I did't see it in this one either.. Will see if one can make a custom block..
@How-to-by-Lou Жыл бұрын
will make a new video that will show how to take photo or picture using scratch or another app
@microsoftbizappsfico Жыл бұрын
@@How-to-by-Lou that would be great! many thanks in advance!!!
@How-to-by-Lou Жыл бұрын
@@microsoftbizappsfico my pleasure - you'll have it in 20 minutes..
@How-to-by-Lou Жыл бұрын
hope this helps....Goes over some basic troubleshooting that's normally covered with block coding.. kzbin.info/www/bejne/qZ-zd2WNna-tY7c
@s4nr0dd165 ай бұрын
Hey so i got the software and everything but after a while of programing it just never started i would press the flag and it wouldnt even start even after re launches
@sahitidasara94254 ай бұрын
Even I'm facing the same problem. You got any resolution?
@fujiijun00 Жыл бұрын
I have a question. Your sprite is Tello. How can I change cat into Tello? Is it difficult?
@How-to-by-Lou Жыл бұрын
on the bottom right corner there is the option to choose a sprite - once you have an image selected from your computer, select the upload from the bottom sprite menu - then you'll change from the cat to your custom image. If you want to revert back you can select choose a sprite and it will take you to menu of many different images to choose from.. Corner bottom right side - cat with the plus symbol
@fujiijun00 Жыл бұрын
Thank you, I need to create my own images for Tello. I hope there is free material somewhere. I am learning scratch with my grandson. From Japan.@@How-to-by-Lou
@How-to-by-Lou Жыл бұрын
@@fujiijun00 Gimp is open source free photo editor app, that's great the two of you are learning to fly and code.. Memories will last a lifetime with the best screen time - www.gimp.org/
@fujiijun00 Жыл бұрын
@@How-to-by-Lou Thank you for introducing me to free image editing software. I will study it.
@Lidzard Жыл бұрын
where do you get that file that you import
@How-to-by-Lou Жыл бұрын
once you create your custom keys you can export and save it.. Download file from here here so the tello experience can be created..from Scratch: github.com/kebhr/scratch3-tello/releases
@manhhaiphp Жыл бұрын
Did something bad happen?
@How-to-by-Lou Жыл бұрын
It crashed but plan to another one down the line with the Tello edu Hopefully it’s a better experience
@pixelgames2391 Жыл бұрын
it didn't work on windows
@How-to-by-Lou Жыл бұрын
Bummer - thought it would work on windows too - did you try selection the scratch menu from the scratch app?