Screw cutting on a CNC Lathe using G76 code

[@matejp.7947]

Hello, I noticed you have the P value in the second line wrong, is P900 in that case not P600... (Diameter - core dia)/2. In that case (20-18.2)/2=0.9 so that give us P900

[@root123]

Fantastic video

[@GO2camSA]

explanation are very concise. thank you

[@weaponstester8976]

Thanks you helped me find out what was wrong with the first cnc metric thread video

[@robertshapiro5800]

R value in the 2-nd stroke has to be a tapered (x-offset of start thread) parameter. If it is straight thread just R0 ... Very useful option which I think, has to be in your beautiful explanation.

[@bennygonzales4642]

Doesn't core diameter and thread height conflict with each other ?

[@YountsMachine]

I have a thread to make and it have a groove where the thread stops kinda like an undercut but its where the z stops before the x moves to clear. is there a way to do that with a g76.

[@TruthbetoldtotheWorld]

So interesting and clear but P value should be big diameter minus final or smallest diameter divide by 2. Which gives 900 in this case instead of 600. Proof: 0.9*2+18.2=20 big diameter.

[@basavarajjobs5323]

Tq you

[@gerbermartin811]

Would you be so kind to help me cutting NPT threads

[@joshmoore526]

Is the first R for finish allowance valued in microns as well?

[@jsihavealotofplaylists]

my old machine doesnt have p value. thank you for the tutorial though. when i get something more modern I'll be bacl

[@1kedoverheels]

I think that "P" value is an upside-down 9 and not a 6?

[@MechInvent]

After memorizing this video meticulously... My lathe is too old for the g76 code

[@sonzai9441]

Did you try the single line one?

[@MechInvent]

@@sonzai9441 no, is that a thing ? I checked and my lathe has g76 listed in the OS so maybe that's it

[@sonzai9441]

@@MechInvent yes, just used it today on a 80- ies mori seiki

[@kiurtosh]

Or you can use after g76 a modal g92 for finish

[@nathandalton2855]

wrong,,,, p value on second line should 0920 as depth of 1.5 thread is .920 multiply this by 2 (1.84) subtract that from thread major dia (20) gives 18.16 which should be your X core dia, this is easy to find in any thread spec, or just multiply the pitch by .6134 to give you your depth

[@mtokkan]

Hey Mark, your pronunciation is a little hard to understand some words. KZbin can not translate your speech into captions in a perfect way.

[@kamilbaron3556]

hhedgit