CNC LATHE PROGRAMMING - SINGLE POINT THREADING

[@TruthbetoldtotheWorld]

I have watched multiple videos on this subject but none of them has been as clear as this. Thank you for spreading your hardly earned knowledge Sir. You’re just an angel!

[@TomStikkelman]

Thank you for those kind words. I am glad the videos are helping you.

[@TruthbetoldtotheWorld]

@@TomStikkelman , you’re very welcome Sir. I was happy to learn that you have served as myself.

[@levigutierrez7809]

Thanks Mr.Tom your an inspiration to all of us.

[@josephguttieri5427]

Hi Tom, after reading many books and a CNC cource, you described it best of all. Thanks!

[@TomStikkelman]

Thank you Joseph. I appreciate the feedback!

[@Vikingman2024]

Very good explanation, clear and concise and without all the hoopla and verbiage! Excellent! Thank you very much!!

[@yeshuaadoneinu436]

thanks all the youtube videos I could find were either in hindi or thick accent. cant believe its hard to find info on this

[@janluigybuffon6136]

Thank you so much for sharing your hard earned knowledge. Could you please share all the coding involved into the whole prosess.😊

[@ernestoterrazas3480]

First Let me thank you for your clear explanation you did in each parameter of the G76 Canned Cycle. Second I would like to ask if possible an explanation on how to program a multy entrance thread.

[@schmetterling4800]

Thank you Sir ,you make my life easier...

[@liaqatali9815]

your explanation very clear....i like

[@lloydsfabricationsolutions441]

I have learned a lot from watching your videos, But in every threading video I have see or forum I have read no one discusses how to control the retract. I am trying to do 3/4-10 ID thread and this is very important in my application and having trouble with i

[@derikackermann9345]

Tom that was great. THX.very helpful

[@themotofix5705]

Can you make a video on how to chase threads on a cnc lathe after a part has been unchucked or for repair. How to find your lead thread and how to make it cut correctly?

[@feliexhiruthayasamy109]

i am watching your video. really very nice explanation.

[@TomStikkelman]

Feliex Hiruthayasamy Thanks Feliex.

[@minasianjohn]

a very precise and detailed explanation as to programing a thread, I am a Mach 3 user and its not a very easy "wizzard" to use, how can I import the program into Mach 3? thank you very much. john

[@JrGil91]

I love that you actually explain things this is going to help me alot...so can you use a g76 cycle with a departing tool to take diameter of stock down as well?]

[@trublemakr8926]

very new to CNC set up and CODE,,, been making chips by hand for a while but i bought a cnc lathe with a FANUC-O control that uses U and W,,emco lathe with ATC,, a video on how to set up part would be great help! Do an OD tool in X and Z, do a center (spot) drill , ID and OD part to tool set up using the geometry page and the offset page would sure help,, great teachings , thanks

[@TomStikkelman]

TRUBLEMAKR I will do it soon. Thanks for watching.

[@trublemakr8926]

Tom Stikkelman ive learned a great deal from you,, you explain things very clearly and slow enough a person can catch on,,, i truly enjoy all your videos!! I have VERY LITTLE info on my lathe set up but with 4-OD tools and 4-ID tools on an 8 station ATC is what im dealing with,,, the lathe also has tapping ability,,, anything and everything you can think of from set up of the raw-stock to geometry page numbers and wear page numbers (i work in absolute programing) i have an emco pc-55 II lathe about 12yrs old-like new, G97 is default, all straight forward fanu-o,, i thank you ahead of time sir !!!! Again,, thanks so much,,,, no one else would help !!!

[@lillpopr]

Awesome man. Glad I found you

[@louisbalvaneda]

I love your videos. They have helped me so much. How would I do a 4 start thread? I have read I just add a Q value?

[@jimgrimes7408]

Thanks this video has helped me alot!

[@Johnmildelacruz]

THANK YOU SO MUCH!

[@tuner453]

thanks again Tom!!! it is awesome video and very good explanations. it help myself fully understand how it work. again thanks for sharing video!

[@songwriting1se463]

Awesome video sir please practicaly explain all program canned cycle

[@Lankoff1]

Good work but a fiew question none movie does not explain how to improve the tight thread without losing the whole day on the repetition of the whole cycle of the program? long screws supported by a knife and tailstock for CNC probably do not exist? work tools on several successively forming part of the process of processing the thread with long screws on manual machines is the norm thread 90deg (flat) 3 tools (grove, left side ,right side) for deep trapezoidal threads min 2 tools(growe,final profil) is there a way to set a number of tools so that they can work as a team next opetion in proces threading? how do trapezoidal thread flat, asymmetrical, multi pass snails

[@mosfet500]

Great help thanks Tom!

[@ahmedkhaledmohamedmohamed746]

clear explanation thank you

[@mdbakulmia-nj2pt]

Thanks

[@gusrinaldi3891]

Good job

[@gurudansingh7209]

Very nice detailed 👍thanks

[@motogold9]

Great explanation and videos! How would you thread the following: threads on both sides of the part separated by a larger specified OD. I know you would use a LH thread tool and run the spindle CW but how would you program it in 1 setup?

[@jarisipilainen3875]

its just same as you see but start point and end point is different. M3 and M4 depending what tool use and if want do right handed or left handed thread. you can do RH tool right handed and left handed thread just switch where start and where end even it wont cut properly :) if you normally run RH tool with M3 from like you see this video. you get right handed thread.if you want right handed thread behind bigger OD you need second RH tool and attack it machine other way and run it from back side using M4 you get right handed thread. you can use same toom in same orientation if it fit to run it. you only need cut groove where it start thread so it not plunge in part :P there is also thread inserts for grooving tools. so it would fit better behind OD just make relief both ends.

[@joedepaul2550]

F.o5 is the pitch, multiple starts use lead. ( lead= pitch × # of starts)

[@bensmith5850]

ok so I'm a mill programmer who has had a SL-35 dropped in my lap. I used your video to figure out how to write the thread program. It put me on the right track but I'm having a fundamentals issues. my thread flank is to wide. what controls that width? I'm guessing insert or maybe speed? any help would be appreciated.

[@kalblades]

Thank you!

[@cliverichens8966]

Brilliant explaination but i entered your g76 code into mach3 and it had an error NO (X END) any help would be appreciated

[@christophercolumbus8944]

hey Tom would you have a post processor for mazak since you use MasterCAM?

[@ES-fr3yz]

If at the end of the shift I don't complete the thread and power off the machine, will it know where to pick up in the morning?

[@georgepapadimitriou4965]

A big thanks

[@mikemai8568]

Hello Tom, What cam software do you use for programming? Thanks for providing these videos.

[@TomStikkelman]

Hello Mike. I use Mastercam for milling and turning and Partmaker for swiss machines (screw machines ). Thanks for watching. TS

[@highig3786]

good day sir, is there a formula on how to picking up the thread after changed the spindle speed(rpm) on g76, in fanuc cnc lathe oi-td

[@TheJohndeere466]

Do you know how to program a figure eight grease groove in the bore where a boring tool would plunge in at say Z-.5 and keep threading back and forth in z while increasing depth after 1 pass in and 1 pass out until the groove is to depth.

[@BigLP89]

would show a thread cycle using g76 with a NPT for example 1/8-27 thank you

[@maxnguyen22]

Nice!

[@leemartinez2333]

is there a difference on writting the code if your making internal threads?? ty

[@TomStikkelman]

Hi Lee. Yes, instead of starting your tool at the major diameter of your thread and stepping down in a X-minus direction you would start your thread at the minor diameter of your thread and stepping up in a X-plus direction. Hope that makes sense. Thanks.

[@cpufixer1]

hi, does mastercam have a post processor for 850sx lathe acramatic?

[@mikewatson5281]

Does this work on ID threads? as far as retract goes

[@ObedJacobs]

Help about the program for thread cutting for m12x1.75

[@chicagolathe-shopmaster-sh1680]

Nice explanation, but in the first section you say G "oh" instead of G "zero"- that could confuse some beginners.

[@nithinraveendran6422]

i appreciate you

[@waynesadventures6332]

Should I replace the g99 to G95

[@fabuloustshirtsonline]

HOW DO YOU CALCULATE RPM FOR O.D. THREADING? I AM LEARNING AND I NEED TO THREAD A .813 -16 ON NITRONIC 60. PLEASE HELP!!

[@amiryasin2689]

dear tom kindly upload a new video of G76 cycle in metric thread cutting pitch 04 mm

[@ryanb1874]

Not compound in feed?

[@donaldkiefer9718]

tom I have 2 lathes I want to get cnc lathe what book can you recommend I can get and study and what cnc lathe would you recommend I get to start out with

[@Oclb]

haas makes a good lathe or moriseki I have a mori but I like programming my haas mills

[@chamathu-kutty.]

I want to know npd thread,bse thread,metric thread,inch thread. can you please explain about it

[@Fubar12341]

Hi Tom, How do you do internal threads using the G76 cycle ?

[@TomStikkelman]

+Chris Perkins I will do a video on that soon. Thanks for watching.

[@dougsanders6034]

The only thing you will have to do different is make sure your x value in the lines before your G76 line is smaller than your drilled or bore size. I usually go .100 smaller depending on the depth of your thread. It has to have retract clearance or it can rake back across the threads when it comes out of the bore each pass. Hope this helps!

[@inuyashacoolieo]

What control is this for, FANUC? we have a Doosan at work and it uses a 2 line G76, it has a FANUC i-series control, is this the proper code for that machine. I have been skeptical about writing a thread cycle longhand on that machine but have used mastercam on it before. i am comfortable programming threads on Haas, but they use a 1 line G76 and the values are much different.

[@TomStikkelman]

+Sandman Actual Yes it is for a Fanuc and should work on your Doosan. Have you tried this format in your Doosan lathe? You can just dry run it and see if it will run. Thanks for watching Sandman. Tom

[@inuyashacoolieo]

Tom Stikkelman Well, I've seen the code that Mastercam posts and it produced a 2-line G76, Comming from mostly HAAS lathes I just wasn't sure what all of the values meant, especially the pxxxxxx. Your video did an excellent job breaking it down, Thanks.

[@tomhoodjr]

Depends on the FANUC.. there are three types... G78 does the same thing in the 21TB (type 3, GE series) I've programmed. www.helmancnc.com/fanuc-g-codes-list/

[@hera413]

why did we put positive value actualy job legth decrees or increase and viceversa

[@HuongHuynh-wg2fc]

Sir! How to calculated P(depth of thread) can you help me! Please!

[@hera413]

in fanuc control cnc lathe we give the positive value in the workshift for reduce job length why did ?

[@TomStikkelman]

+hiran thush The WORKSHIFT works opposite from WORK OFFSET. Make sure to use a G54 offset in your program and then make your adjustments in G54. A positive offset should make part longer.

[@hera413]

Thanks brother i will follow your post usefull informations Keep in tuch bye

[@ilikethisusername2415]

G92 officially is not a canned cycle. It's a repetitive cycle.

[@173roberto]

If my program is metric how should I write P and Q values?

[@billklatsch5058]

+Ro Cuevas micrometers

[@waynesadventures6332]

Please help me.need to cut intenal Acme tread.pitch 5mm but only 4mm deep.id nut is 20.1mm and 27 long .od of bolt 24.

[@waynesadventures6332]

Im trying to add my value but no success.keeps on cross threading.

[@gusrinaldi3891]

hello sir, i have a kingston machine type CL38C. i have a problem with the alarm code "ex 1034 2nd turred not inposition" what is the solution ,, i expect your answer

[@TomStikkelman]

Try to manually index the turret to clear the alarm and make sure it is in the home position

[@gusrinaldi3891]

Thank you sir

[@shanmugams7536]

How to calculate second line P297

[@THEWORLD-GK]

sir Tom. can you help me to make acme theread 2start program

[@yahye674]

why no center? not enough clearance?

[@SearchForTruthHD]

Rusty Shackleford no need for it.

[@stevepasley3099]

in the G76 the HAAS SL20 wont do the P030030 it just said bad code does any one know y?

[@diegochavez4046]

Hello how can i do NPT thread???

[@TomStikkelman]

Here is a link that may help you with that. en.industryarena.com/forum/1-4-npt-threading-cycle-g76--146377.html

[@timhughes8851]

Hi Tom, using this at my job too. Doosan 220 series. Fanuc Control. Why does the controller not accept the decimal on R? We are machining Radius ( R 0009) holding .0004 tolerance. Pitch. Need to adjust the R in the program as no offset for R.

[@THEWORLD-GK]

I thing samthing rong. see. haf inch dia metar =12.7-.4405=12.2595 ok then 12.2595÷2=6.12975 ok but you put there p297 why im not andastand can you tell me what is resan that.

[@patientestant]

I'm not sure where you are getting the 12.7. The outer diameter is .5 inch subtract the minor diameter and divide by 2. Written out in arithmetic it is (.5-.4405) ÷ 2 = .02975 inch

[@hera413]

how to rework thread

[@TomStikkelman]

+hiran thush If the thread is too big then you can make a tool offset change and restart the threading operation, as long as the chuck or collet has not been opened.

[@hera413]

sir can you please show in a video how to reworks metric thread

[@Viratdubaicityvlogs]

CNC lathe machine vacancy available 15 work experience

[@bigj2529]

流浪猫的事儿我支持，你控制不了的风险，不要去弄。就和什么放生似的，不懂别瞎几把整。

[@operatorcnc200]

intrati in faliment cu asa programe!