Screwdriver restoration | 3D HDR Sound Relaxation

The old rusty screwdriver is quickly dismantled, because with the multifunction tool only two bolts need to be ground and knocked out. In this project, the focus is on machining with files and sandpaper (different grits).
Please also note that this video is not only to quickly show someone how something works, but also to relax and unwind from everyday life!
------------------------------------------------------------
▶ What did I do ?! ◀
The antique screwdriver was not in very bad condition, which made this restoration very easy. After I dismantled the wooden handle with the help of a multifunction tool, the screwdriver was soaked in rust remover for a day. Then it was brought back into shape with files and sandpaper. The tip of the screwdriver was hardened. Finally, the antique screwdriver was polished on the polishing stand, my favorite task ;). The new handle is made of beech wood and was fitted exactly. With two bolts made of brass, which I made on the lathe, the handle was connected to the screwdriver.
------------------------------------------------------------
▶ Good to know ◀
I used the following tools: Multifunctional tool, pin punch, hammer, rust remover, files, sandpaper (different grit), cordless screwdriver, drill, pen, belt sander, linseed oil varnish, soldering torch, oil, polishing stand, polishing paste, lathe, brass, lathe chisel, saw
------------------------------------------------------------
▶ Special thanks to my channel members! ◀
-
------------------------------------------------------------
▶ Do you want to support me? ◀
Do you want to become a channel member? Then you can do it here:
/ @forgottenshinerestora...
You like what you saw and you want to help the channel to develop? If you want to support me, you can donate via Paypal:
www.paypal.com/donate?hosted_...
------------------------------------------------------------
▶ Did you like it? ◀
Did you like the video?
Then like, subscribe and share it, please!
Thanks a lot!

[@RestorationVideo]

*_There's just something magical about watching something that was so old and broken being restored back to looking so new. Its such a thing to watch. ❤_*

[@ForgottenShineRestoration]

Thank you very much! 🐢

[@user-nk6if2pi3x]

Beautiful both ways. I love the old for its patina and it’s character. And I love the new for its restored life and beauty.

[@StealthDonut1]

Couple of thoughts: Firstly I know many will disagree with me when I say that as a huge fan of Evap-o-rust solution to soak rusty tools and parts in, I wish I saw it used more often than sandblasters or electrolysis. I love that good ol' fashioned rust removing solution! Secondly, I love these old wooden handled tools! The question people should ask is not "Why did they use wooden handles for tools?" so much as "WHY did they stop!?". Thanks for a perfect restoration!!

[@ForgottenShineRestoration]

Thanks for your great feedback!🐢 It also always depends on how much an object is rusted, objects in rust remover I usually do only with weakly rusted things. The rust remover works very well too though.... 🤩Nowadays no one makes the effort to make a wooden handle, dipping in plastic is much faster and better with a machine ...😔🐢

[@autumn5592]

Price is why they stopped. Easier and cheaper to form fiberglass (hammer handles and the sort), or use a tube dipped in rubber. Now, a steel tube is more durable, but god does it feel awful. I love my wooden handle tools, and make my own whenever I can.

[@donnabrowne5307]

I appreciate the rehabilitation of a still-useful tool. However, I was a disturbed by the waste of the linseed oil--a teaspoon would have been sufficient. A philosophical disconnect there...

[@A.l.t.a.i.r_AC]

Черепашка крута😊🐢 Чудовий підхід до роботи!!!🆒😎👍🌝💙💛

[@Legendofmudkip]

Out of curiosity, do you use the tools after you restore them? Or are they displayed as a job well done

[@ForgottenShineRestoration]

I would say both... 😅🐢

[@magnus0017]

Wonderful audio as always, very nice video. It's nice to see something simple sometimes like this, and enjoy watching the pieces come together. The wood matching into the grooves was extra satisfying. Also, the kids approve, as always, of more turtle brush. ^⁠_⁠^

[@ForgottenShineRestoration]

Thanks a lot for your great comment! 🤩🐢

[@briangoldberg4439]

dont you have to temper the metal after you harden it?

[@jlindskog5141]

Schleifen und kratzen, kratzen und wieder schleifen aaaaah viel Handarbeit ist auch wiedermal schön anzusehen und hören 😅; Turtel streicheln passt auch dazu 😂😂😂🐢👏🏽👏🏽👏🏽 Tolle Arbeit danke

[@ForgottenShineRestoration]

Ja, es war wieder sehr eintönig, aber auch irgendwie entspannend... 🐢

[@andrzejporeda7281]

Super jest odrestaurowany ten śrubokręt 👍👍👍👍

[@weihaihu2265]

Thank you for your 15 minutes

[@Kampat]

Keren sekali, baru kali ini melihat obeng medel seperti ini

[@MrJoyFulDuck]

9:34 best shot very cinematic

[@crabbyturtle1594]

Easy on the turtle!

[@pavelkoudele5526]

Pěkná práce při restaurování.❤ Pavel 🇨🇿

[@ForgottenShineRestoration]

Díky moc! 🐢

[@mayflower9705]

It's like Extreme Makeover for old and rusty items 😄

[@user-ek2nv6lf3r]

А если обтачивать надфилем и из целого бревна можно три дня снимать!!!:))))

[@flanka7819]

I love watching restoration while I’m fasting

[@anton_blyablin]

wie immer sehr cool !😲 süße Schildkröte 😊

[@ForgottenShineRestoration]

Vielen Dank! 🐢

[@anton_blyablin]

@@ForgottenShineRestoration bist du aus Deutschland?

[@kirokcarnahan1268]

What a perfect screwdriver!

[@ForgottenShineRestoration]

Thank you! 🐢

[@jeffbaranowski6695]

Nice work. However, you missed a step. After heating the tip and dipping in oil you must temper it in an oven or it will be hard, but brittle.

[@ForgottenShineRestoration]

Thats true... 👍🐢

[@detudoumpouco-gs2zx]

O melhor. Posta mais vídeos pra gente. Sua organização é incrível 🇧🇷

[@ForgottenShineRestoration]

Muito obrigado! 🐢

[@Sashquashy]

Wow that’s a piece of art I wouldn’t even wanna use it

[@ForgottenShineRestoration]

Thank you very much! 🐢

[@ravendark2422]

That burr was not created by hammering, I’ve restored paint scrapers with that design.

[@scottcates]

Yeah, that was weird he filed it off.

[@user-br3ou2cs9o]

I agree somewhat with what your saying that casting/forging of certain tool's tangs have a raised/thickened edge in certain locations. Even some with specific hammer striking areas like chisels. However, IMHO, at about the 14 second mark with the view of the end of the screwdriver handle while in the vise it appears to be a burred areas from hammering and the wood portion is flattened as well. It's more prominent on the one side and it has small splits/cracking on the edge of the more prominent burr which can be seen even better just before he files it later in the video. You can still see after filing the thicker areas of the tang's casting/forging toward it's edges and end.

[@theskyehiker]

That “burr” is part of the original design. Too bad he filed it off.

[@lucieleimbach]

Nice job. Love your including the turtle. 😂

[@ForgottenShineRestoration]

💪🤩🐢

[@schallkiste82]

Richtig guter Sound! Sehr gute Arbeit. Ich würde ja jetzt sagen, wo gehobelt wird, fallen Späne, aber bei dir heißt es, wo gefeilt und geschliffen wird, fallen Späne 😊 Warum hast du nicht mehr mit dem Bandschleifer geschliffen? Und ist es von Vorteil, die kannten vorn beim Schraubenzieher abzurunden? Und am Ende, beim Nieten hämmern hast du einmal daneben gehauen, was? 😅 Nee, sehr gute Arbeit, auch wenn ich Schlitzschrauben überhaupt nicht mag, außer man will besondere Schrauben herzeigen an einem schönen Werkstück.

[@ForgottenShineRestoration]

Vielen Dank! Ja, in diesem Projekt wurde viel geschliffen und gefeilt 😅 Mehr war mit dem Bandschleifer nicht möglich, das wäre zu ungenau gewesen... Neeeiiin, wie kommst du da drauf das ich daneben gehauen habe🤗😳😅🐢

[@j.l.emerson592]

By the big dent on the wooden handle scale... that's how...

[@burga6620]

satisfying :)

[@FaroukMensi]

Great Work ❤️

[@ForgottenShineRestoration]

Thank you very much! 🐢

[@MuscoviteDN]

Another perfect tool by handy master. ))))

[@ForgottenShineRestoration]

🤗🤩🐢

[@mikebetts5532]

perfect. wonderful work. 🔨⛏️🔩🛠️🔧⚒️👍

[@ForgottenShineRestoration]

Thanks a lot! 🐢

[@user-gv4tn9nb7f]

Beautiful work

[@ForgottenShineRestoration]

Thank you very much! 🐢

[@sandorkurtan3797]

Wonderful work!

[@ForgottenShineRestoration]

Thank you very much! 🤩🐢

[@JayMStein]

Beautiful work!

[@ForgottenShineRestoration]

Thank you very much! 🐢

[@vinceianni4026]

Hello mister beautiful restoration good job well done

[@ForgottenShineRestoration]

Thank you very much! 🐢

[@Desert-Tan-Whiskey]

Amazing work 👍👍👍

[@ForgottenShineRestoration]

Thank you very much! 🤩 🐢

[@jrenmo]

Irwin screwdriver?

[@MASI_forging]

Nice restoration. Can't stop watching 😄😄

[@ForgottenShineRestoration]

Thank you! 🐢 🤩

[@luachea]

Llego tarde pero aquí estoy viendo tu vídeo. Saluda a 🐢.

[@user-li8wi7zl9n]

Продолжай снимать,твои видео очень нравятся.

[@ForgottenShineRestoration]

Большое спасибо! 🐢

[@tnxstaff]

top work!

[@ForgottenShineRestoration]

Thank you very much! 🤩🐢

[@t_i_988]

At the very end of the blow of the hammer fell on the handle, a dent is slightly visible. But we are not machines, anything can happen. Good job!

[@ForgottenShineRestoration]

Thank you very much! 💪🐢

[@velvetinedrapes4359]

Quick question. Would a spokeshave or plane be a better tool for rounding off the handle? Using a rasp seems to be a longer process and more of an issue regarding the really fine sawdust that gets everywhere even after you vacuum and sweep

[@sawboss5794]

What is a spokeshave?

[@ForgottenShineRestoration]

I think this does not work very well because the handle is very small and consists only of curves. A plane is rather something for straight surfaces...🐢

[@garyjones2582]

Very nice work F.S... Turned out beautiful...

[@ForgottenShineRestoration]

Thank you! 🐢

[@hassanmuhammad3349]

Perfection

[@ForgottenShineRestoration]

Thank you! 🐢

[@crS-CS-]

I love it !

[@ForgottenShineRestoration]

🤩🐢

[@andreasm481]

Super Ergebnis ! Deutsche Wertarbeit vom Feinsten ! Ich klappere auch die hiesigen Flohmärkte ab, wahrscheinlich warst du schneller ! Eigentlich restauriere ich nur alte Sturmlaternen/Petroleumlampen, da sieht es auch mau aus mit Angeboten. Ich habe mir dich aber letztens als Vorbild genommen und für ein japanisches Gemüsemesser eine Scheide aus mexikanischem Rosenholz gebastelt, das wurde original nur mit einer ollen Plastikscheide geliefert. Hat geklappt. Hab mir da was bei dir abgeguckt und soviel Unterschied zwischen Messergriff und -scheide gibts ja nicht. Hoffe natürlich auf weitere Anregungen und dir weiterhin Frohes Schaffen !

[@ForgottenShineRestoration]

Vielen Dank für dein tolles Kommentar! Ich habe vor kurzem 3 Sturmlampen von Feuerhand bei ebay Kleinanzeigen gesehen, vllt gibts die ja noch?! Das mit deinem Messer klingt auch super 🤩👍🐢

[@andreasm481]

@@ForgottenShineRestoration Du darfst jetzt 3 x raten wo ich meine Lampen herbekomme ! Außerdem suche ich immer was Ausgefallenes, Feuerhand und BAT und Meva und ....gibts reichlich. Letztes Jahr hatte ich eine sowjetische Laterne ersteigert, schön groß, hab ich in Tarn-Look gemacht. Man kann ja nie wissen !

[@RestorationAustralia]

Looks new.😊😊😊

[@ForgottenShineRestoration]

Thank you bro! 🤗🐢

[@MSJONESBLOUNT]

Amazing video bro

[@ForgottenShineRestoration]

Thank you! 🐢

[@MSJONESBLOUNT]

@@ForgottenShineRestoration can we be friends

[@miklejackson64]

Когда учился в бурсе, такие делали.

[@BostLabs]

Thumbs up for the Turtle! 😂

[@ForgottenShineRestoration]

🤩🐢

[@romankache1611]

Sehr schöne Arbeit wieder. Ich sehe deine Videos zu gern. Mach weiter so und grüß mir die Schildkröte 🐢

[@ForgottenShineRestoration]

Vielen Dank! 🐢

[@larryrizzo736]

Nice job!

[@ForgottenShineRestoration]

Thank you! 🐢

[@thrashcore7]

🪛🐢 Excelent restoration

[@ForgottenShineRestoration]

Thank you very much! 🐢

[@rafael8840]

tava com saudades dessa tartaruga

[@ForgottenShineRestoration]

🤩🐢🥰

[@natalyapopytailenko1359]

Great! 👍 cool! 😎😎

[@ForgottenShineRestoration]

Thank you! 🐢

[@briansworkshop01]

Amazing work and a fantastic video thanks for sharing your time and skill 👍👍

[@ForgottenShineRestoration]

Thank you very much, too! 🐢

[@user-lh7xc1vr2y]

Nice! В мене така є. Але ручка в неї не із дерева, а із текстоліту.

[@TheSamEmpire]

Where do you get rusty things ?

[@jamesanderson1903]

Artistry

[@ForgottenShineRestoration]

Thank you! 🐢

[@re-fix9678]

👍👍😘😘

[@casualfoodenjoyer7951]

@1:07 😂😂

[@ForgottenShineRestoration]

🤣🐢

[@davehaggerty3405]

It sure looks like an Irwin screwdriver. If it is it would have Irwin stamped on the shaft. Irwin made reproductions of their iconic screwdriver. It came in two sizes. And no, they did not have special hardened seasoned tips. The entire shaft went into the furnace in batches of hundreds. The furnace was a big revolving cage that would revolve about 1 RPM over gas flames. When all the screwdrivers or whatever glowed red they would dump them into a big steel basket on a crane. Then quickly swung over to a vat of oil and lowered quickly into the oil. If they lowered it slowly, or if the pieces were white hot it would set the surface of the oil on fire. If it was bad it would set the roof on fire. The fire department was called to put out the roof. The heat treat department seldom had a roof. Because every time they’d fix it they’d set it on fire again. They liked it better without a roof because it got so hot in there. I worked there before Irwin sold out to Stanley and left town.

[@ForgottenShineRestoration]

Very interesting! Thanks for the insight 🤩🐢

[@sfcdc154]

🔝 🇧🇷 👏🏻👏🏻👏🏻👏🏻

[@flaviakoch7378]

🐢 always inspecting

[@strimmerguy]

hey, FS. What was the rust remover solution you used?

[@ForgottenShineRestoration]

My rust remover is "Rost io", it's great and dissolves the rust very well 🐢

[@strimmerguy]

@@ForgottenShineRestoration Thanks!

[@sardarwaleed8551]

I want to contact with you how it is possible

[@sardarwaleed8551]

How are you

[@user-qs7lj3ub9s]

احسنت

[@ForgottenShineRestoration]

خیلی ممنون! 🐢

[@sardarwaleed8551]

Hi

[@user-qs7lj3ub9s]

احمد مر من هنا

[@sardarwaleed8551]

I've a sword for restoration

[@sardarwaleed8551]

Please reply me thanks

[@transport_restoration]

funny turtle :v

[@ForgottenShineRestoration]

🤣😅🤩🐢

[@michaelcanavan754]

I WOULD GUESS A GERMAN MADE TOOL?

[@ForgottenShineRestoration]

Yes, that could be...🐢

[@mskayla7747]

Not relaxing for me. The filing is something that I must turn the sound off for. Doesn't stop me from enjoying your work though. 🙂

[@ForgottenShineRestoration]

Thank you.. 💪🤩🐢

[@ovidiuciuparu6421]

1:01 you do know that you can do that without grinding the head right?

[@harryscratch212]

Did you fil this in slow motion?

[@autumn5592]

That was not hot enough to harden it. And it was likely hardened properly when it was made. Unusable, the bit will twist when you go to use it.

[@Anakoicer]

После закалки нужен отпуск. Так как показано - кромка может крошиться.

[@stopar47]

Sklamem ŤA , nebudem Ťa chváliť. Prečo ? Lebo z Tvojho videa som nedostal odpovede ktoré som čakal. Mal som ten istý skrutkovač. Sekal som i ním nity, zvary / opravoval som pred rokmi karosérie/. Neopravoval som rukoväť, však načo ? Na konci je zo železa... Skade sa vzal, kto mi do daroval ? To si už nepamätám, ale nosili mi i náradie za pomoc čo som spravil pri opravách. MAL veľmi kvalitnú oceľ. Vlastne ho mám ešte niekde v krabici...Len sa venujem teraz iným veciam. Čakal som že HO pomenuješ a napíšeš kde ho vyrobili. 😫 Že spravíš ostré hrany a ukážeš , že ak poklepeš po starej skrutke, tak ju povolíš a odsekne i oceľový NIT. Že ukážeš aký je to nezmar a super náradie.... Máš ešte šancu odčiniť čo si nenatočil a naostriť ho ako sa patrí. **** Takýto už DNES nikde nekúpiš *** a kto ho nepoužíval ,tak je to video , iba ako jedno z milióna videí aké kolujú do zbláznenia naokolo.....

[@user-du7rn4cv6v]

5:22 Да... Опилить ручку сразу близко к размеру как-то нельзя было? Зачем такой героизм?

[@jeanrodrigues6249]

chipset

[@Solid_Punch]

The tip was already hardened! You ruined it!

[@glenn_25]

U ddnt cut the wood b4 you shaved it...waste of time...and then u used the belt sander after...so why use the hand wood file

[@ovidiuciuparu6421]

1:16 obviously you don’t!

[@mixdiver12]

Nice work… but forget the childish and not funny turtle.

[@user-jy9nc7bq4m]

Результат превосходен! Но, при разборке, стоило ли обтачивать и выбивать заклепки? Все равно деревянные накладки поменял.

[@ForgottenShineRestoration]

Я хотел сохранить старую деревянную ручку, но, к сожалению, это уже было невозможно. к сожалению на видео этого не видно... 🐢

[@user-jy9nc7bq4m]

@@ForgottenShineRestoration я не хотел подвергнуть сомнению твое мастерство и тем более обидеть тебя. Спасибо за работу!!!

[@ovidiuciuparu6421]

3:56 creepy and stupid!

[@sugarsammy7209]

The faces on turtle always get me

[@ForgottenShineRestoration]

🤣🤣👍🐢

[@hansmuller1558]

Das ist ein Schraubendreher! Ein Werkzeug lebt nicht, kann aber repariert werden.

[@kingshady6595]

Changing the design to make it easier 😅😮

[@kellybowen6031]

A 16 minute same video on restoring and of screwdriver. This is entertainment? I think not.

[@DeaFebiansChannel]

I'm new subscriber..Nice to look your video n good handjobs👍

[@ForgottenShineRestoration]

Thank you and welcome! 🐢

[@user-bv9cq2er1i]

Зачем брать такие толстые заготовки, что бы потом тратить сталько усилий для обточки рашпилем? Но даже если и так, то разве нельзя использовать ножовку или гриндер для снятия лишнего материала? Контент нужен?