Рет қаралды 1,072,148
When restoring these old rusty scissors I tried to use simple techniques and machines. The derusting I have made for example with lemons, so just squeezed lemons and poured the juice over the scissors. The citric acid dissolves the rust super, whether it worked for me, you can see in the video! In this project I also milled, but what you can also file or saw. Turning on the lathe can also be replaced by buying a screw. I also welded, hardened, drilled, tapped, polished, painted, nickel plated, sanded and more. I purchased these antique rusty scissors from a flea market internet site. Please be sure to also note that this video is not just to quickly show someone how something works, but also to relax and escape from the daily grind!
------------------------------------------------------------
▶ What did I do ?! ◀
The scissors were badly rusted and I wanted to try if citric acid could remove the rust, so I squeezed the lemons and poured the lemon juice over them. After that, I drilled the old screw out of the scissors since it wouldn't come off. I then filed and sanded the scissors, drilled and re-tapped the thread. Then I hardened the two scissor parts in the hardening furnace and tempered them in the furnace three times for an hour. The old scissors were then polished back to their "forgotten shine" on the polishing bench and the handles were painted with black spray paint. To protect the blades of the scissors from future rust, I nickel plated them in nickel electrolyte. Finally, I turned a new screw and nut on the lathe. This I treated with cold burnishing, so that the rust has no chance there too.
------------------------------------------------------------
▶ Good to know ◀
I used the following tools: Hammer, pliers, propane torch, pin punch, lemons (citric acid), file, vise, sandpaper, clamp, tape, knife, spray paint, oven, hardening oven, cordless screwdriver, drill, isopropyl alcohol, cold polisher, paint brush, lathe, lathe tool, oil, internal tap, external tap, hot plate, lab power supply, nickel electrolyte
------------------------------------------------------------
▶ Special thanks to my channel members! ◀
------------------------------------------------------------
▶ Do you want to support me? ◀
Would you like to become a channel member? Then you can do it here:
/ @forgottenshinerestora...
You like what you see and you want to help the channel to develop continuously? If you want to support me you can donate via Paypal:
www.paypal.com...
or use the following affiliate links:
Material for work:
Metabo bench grinder amzn.to/46rrkxL
Metabo cordless screwdriver BS 18 LTX-3 BL amzn.to/43833JV
Metabo bit set amzn.to/3pzwV4n
Ballistol cold bluing amzn.to/3K3Oil1
File set Gedore amzn.to/3NWmXU1
End mill set amzn.to/3PFBAMT
sandpaper file amzn.to/3PBNo2D
nickel electrolyte amzn.to/43djB3g
nickel anode amzn.to/3rfQxe8
laboratory power supply amzn.to/3CUApRQ
Equipment:
Camera Sony AX-53 amzn.to/3XHqI2J
Ring light amzn.to/3rhgj1Q
Microphone Rode amzn.to/44vlFF1
DJI Gimbal Camera amzn.to/3O1YjkJ
Affiliate links don't cost you anything, I just get a small share from the seller, you have no disadvantage from it.
------------------------------------------------------------
▶ Did you like it? ◀
Did you like the video?
Then like, subscribe and share it, please!
Thanks a lot!