Scuba Diving with the DJI Osmo Pocket 2 (3 Axis Gimbal Video Stabilization).

[@everythingscuba]

Want to support the Everything Scuba Channel: (Check out our new Merch store!) everything-scuba-merch-store.creator-spring.com/ (NOTE: $1 of each purchase is donate to Project Aware!) Subscribe to Everything Scuba (If you're already subscribed, thanks! We appreciate your support!) kzbin.info/door/qkYj52oqx4kie11AMtdRDw

[@EberTorchonKadansTv]

Hi! Did you try to contact the manufacturer? They might be able to help you and send you a new one

[@seanlotz9581]

I had my eye on this as a potential first underwater camera, but after seeing your review, I'm going to hold off and see if they resolve the issue with their waterproof case. Very much looking forward to their response on this situation!

[@samsilverstein4950]

Did you ever hear back from DJI about the failure of their product?

[@seminkwak]

Thanks for the good video! I also experienced exactly same as yours :( I love the osmo pocket but the housing MUST be updated. The problem of this housing is that the locking system is not the on/off system like gopro. It makes users doubt about sealing and try to tighten to make sure and tragedies happen like yours (and mine too)

[@ruih1597]

They should give you a replacement camera and refund you the cost of the housing as the housing doesn’t do what it said it can do (aka false advertising). It looks like it’s made of cheap plastic with a single O ring over a “threaded cover”… and that’s rated to 60 meters? …

[@laloon2031]

Hi, Thanks for the video. Unfortunately, the same thing happened to me, too, twice. First time it happened at 16m depth, I checked the ring and it was loose, the camera was soaked and I had to contact customer service. Luckily they gave me a free replacement and new housing for free, even though I was out of warranty. The second time it happened I was freediving, at only 10m depth and the ring was loose again. This time I was under warranty (within a year they gave me the replacement)- so I got lucky with the replacements without paying anything. I would say try contacting customer service again, the housing definitely was a false advertisement, and the ring will not hold water pressure under 10m.

[@poco_films]

So, which 3rd party underwater case is best to be used with the pocket 2? Hope you can make a video about it. Thanks. 🙏🏼

[@philipnicholson3216]

I fly DJI drones - their products are good but have found customer service somewhat lacking. I use GoPro which has excellent image stabilization but am intrigued by the color reproduction of the images and video you shot - it looks very good. I wonder if a second O-ring would eliminate the problem?

[@everythingscuba]

As I’ve stated to others. I’ve owned multiple DJI products and have always enjoyed them. Good quality and excellent cameras. So we were very disappointed in the underwater housing. So far DJI customer service has not been very responsive.

[@elishapetrie1226]

Any update on the housing?

[@marls1977]

Did you get any updates from dji?

[@WesternAustraliaNowAndThen]

Rather sad to see that the original DJI housing is just as bad as the knock-off version. We bought a knock-oof one not for diving but to use as a weatheroroof cover and for use on board a boat to combat spray. I don't think I would ever trust one of these housings to go underwater for more than a few feet. DJI states a depth of 60 metres which for a design like that is pure fantasy. Hopefully they did the right thing and replaced your camera.

[@marclenraymagdaraog691]

bruh 60 meters even for GO pro casing is a stretch lol. the deeper you go under the more pressure it takes and causes the entire thing to have a leak somehow since you can't regulate the pressure inside of the casing.

[@rags1734]

what is the follow up on this? im curious.

[@PLAPORTE]

Is there an update August 2022? I have an underwater housing, but I haven't used it yet and I'm worried that it will ruin my camera

[@everythingscuba]

Unfortunately DJI never got back to me. We have definite concerns about the design of this casing.

[@globetrotteradventurelifes4066]

Gopro for Diving or Phone/Camera with dive case👍 Dji for Flight & FPV

[@everythingscuba]

Actually my DJI Osmo Action camera has been awesome diving camera. In comparisons with GoPro, DJI color correction is far superior. Thanks for your comments and thanks for watching!

[@tonyhouk9047]

Would have been a cool concept but this video killed it for me. Hope DJI responds with kindness.

[@everythingscuba]

Yeah we were very disappointed too. I enjoy DJI products. They have always been excellent quality and so this housing design was surprising. Thanks for your comments.

[@philipnicholson3216]

@@everythingscuba I wonder if there is an OEM product yet ?

[@everythingscuba]

@@philipnicholson3216 not that I’ve found yet.

[@philipnicholson3216]

@@everythingscuba I found some - Walmart and Amazon both have different versions - at least one of those has been pressure tested (you tube video )

[@Hawkeye-Flyer]

Hi, Thanks for sharing. Is the case backward compatible with the Pocket (Pocket 1 )

[@bubblerings]

Any response in the last 4 weeks? Am about to buy the original Pocket and housing. Mahalo, -Scotty on Maui. -Ps. What mode are you in, so you can turn and look up and down? Follow? -And, Autofocus that works underwater reasonably well... AND Stability... Wow!! (regular Pocket is like 199 bucks, now)

[@everythingscuba]

DJI has asked us to send in the Pocket 2 camera that is now dead and the hosing and they will determine if there was any defects on the housing. Haven’t heard back from them yet. When you put it in the housing you will set it into the “underwater housing” mode and that limits the movement of the camera somewhat. But it’s starting very stable! And we were really impressed with the color!

[@bubblerings]

@@everythingscuba Me too! Thx for sharing and your reply.. 👍🍀💦🍻 Edit: Was glad to find your footage. Another housing vid had horrible shake.

[@kadebaitrum7797]

Any updates from DJI?

[@everythingscuba]

None yet.

[@AliEveritt]

@@everythingscuba Any update as of April 2022?

[@jcarlos518]

The only helpful video so far! Thanks!

[@GhostStalkerActual]

I don't know if I'm compromising the waterproof rating, but I used PTFE tape on the threads because I was worried about the o-ring placement too.

[@DustinHallUltraRunner]

Does the case give a glare out of water. Like if I am on the dive boat, and dolphin's start jumping, will I get a big sun glare form the case

[@ga20904]

I'm looking forward to buying the P3

[@francescotommasovolpicelli4133]

hello, a piece of advice, I do diving and can the problems regarding the glass flat be solved with the anti-fog sheet? and is the underwater case resistant to water pressure? in the sense that if I go down to a depth of 20, 30, 40 meters, no water enters to ruin the camera? Thank you

[@mojoguy7700]

I use silicone o ring grease just to be sure to prevent leakage at depths as extra safety and if you want to place in a small condom (it works lo you may laugh lol )

[@martysender5539]

Great stuff. I use Pocket 2 to record music, bands...first time i've seen it used underwater sea life, and it's great. big thumbs up. Marty of Marty Sender You Tube

[@osirusj275]

u have a solution for overheating? it heats up within 15min and less

[@Mrveescuba]

lol no now you know we never open the housing in between dives!! cheers

[@nicky.keller]

Strange that you promote an underwater housing when it destroyed your camera. I wonder if there is a hack to secure the camera dryness….

[@lesliefranklin1870]

Underwater housings are generally difficult. One hair or grain of sand in the wrong place can cause flooding, especially under pressure. Also, it seems like the design is defective with the ring coming loose, as listed in several comments below. An O-ring is generally made of silicone, and often people use a *small* layer of silicone grease to help the seal. Everything must be cleaned, lubricated, and tested in clean water before each trip to the open water. Unfortunately, there is seldom a guarantee. Some users were lucky to get a replacement. Good luck.

[@osirusj275]

can u do a review of the alternative waterproof casing thats cheaper ?

[@AAwp6991]

So is it the depth you are going to that is causing the breach?

[@TritonsRealm]

Thanks for another great hands-on product review. Looks like a double o-ring system might be something DJI should consider.

[@Crispyjokes]

I went scuba diving with the DJ pocket 2 (with waterproof case) and the same thing happened to me!!! I didn’t even go that deep, about 50 ft for 30mins or so. Did DJI ever get back to you regarding the case or the pocket 2?

[@everythingscuba]

+Kei Tse did it kill your camera? Interesting that this happens to you too. We sent in the case and camera to DJI but have not heard back from them yet. Will let you know if we do.

[@Crispyjokes]

@@everythingscuba yea it killed my camera as well. I will reach out on DJI on Tuesday and see what they say!

[@katerosine]

@@Crispyjokes How was DJI say about this issue?

[@Crispyjokes]

@@katerosine I mailed the pocket 2 and waterproof case to them to do some testings. They are sending me a new pocket 2 and waterproof case for free because they are still under warranty!!

[@katerosine]

@@Crispyjokes Cool! I hope in another country have warranty too.

[@ScottsReviews]

Hello what white balance setting did you use? AWB? Or manual ? Thanks.

[@ScottsReviews]

Wow just saw you got water in it. Geez. Do you think the pressure loosened the ring ?

[@everythingscuba]

Scott, once you set the Osmo Pocket into Underwater mode it uses auto white balance. I don’t believe you can do Manila white balance. And yes we believe the design of the U/W vase is flawed. Having a single prong in the position it is in allows water pressure to loosen the ring.

[@ScottsReviews]

@@everythingscuba ok thanks not risking it, returning it.

[@divingcentermarcopolorijek1262]

Great review👌👌👌🤿

[@aaronking3642]

Did it float

[@DeeferDivingCarriacou]

I didn't know you could get the Osmo Pockets UW case. We're using the Osmo Action and love it.... Great Vid

[@everythingscuba]

Based on our findings I wouldn’t rush out and buy one! LOL However we do love our Osmo action!

[@DeeferDivingCarriacou]

@@everythingscuba I'm a big fan of the Osmo action and bought that to replace the GoPro 9 which I found to be too unreliable....

[@Vidishish]

DJI 3 has stabilization?

[@everythingscuba]

The DJI Osmo Action 1 and 2 also had stabilization which were impressive. I’m anxious to test out the Action 3!

[@bignickdigga1]

So...how's DJI's warranty?

[@everythingscuba]

They’ve asked us to send in the camera and underwater housing. They stated if they determine the case was faulty they’d replace the camera. Still no explanation on why this may have happened tho.

[@jeisonmayabuitragopublicis4390]

About to buy the pocket 2 with casing but I think i would rather buy a cheap $50 cámara for diving. I have seen sooooooo many bad reviews with water getting inside the casing with 3rd party and original dji pocket casings.

[@osirusj275]

wow u can get cheap 50 dollar camera that has casing to go underwater and with good footage? send me the links, thanks.

[@marclenraymagdaraog691]

bro at that point just buy a Go Pro or an action camera.@@osirusj275

[@MatimasterVlogs]

what editor do you use for your videos

[@everythingscuba]

Final Cut Pro.

[@MatimasterVlogs]

@@everythingscuba thanks, greetings from Argentina

[@bushidoconectorgustavooliveira]

Muito bom

[@stevemichel801]

Did you do any color correction or use filters?

[@everythingscuba]

No this was all directly from the camera. No color correction was done and no filters were used.

[@stevemichel801]

@@everythingscuba did you get my email and video?

[@everythingscuba]

@@stevemichel801 Steve. I don’t believe we did! Try resending it to [e-mail]

[@osirusj275]

between action 2 and pocket 2 which would you prefer and why?

[@lynneftw]

Drink every time he says "dgi"

[@marclenraymagdaraog691]

Ok so the housing is very easy to fix. like just buy an additional O ring. very simple. also lubricate and test first on a tub if water is going in or not. AND IT WORKS PERFECTLY. one of the best cameras out there. perfect Stabilization.

[@acid0828]

Great video! I have already ordered the UW case and most probably I'm going to get the same model you have. Well, I hope it's not gonna happen to my pocket 2 as I really love this camera and it's already out of warranty. I hope you don't mind posting another vid once you get a replacement from dji. Thanks bro! Subscribed.

[@everythingscuba]

James I’d be careful. Have not heard back yet from DJI but I’ve had several other viewers tell me they had the same experience as me and it killed their camera.