Oh wow now we are teased. Looks like I’m staying up wrenching in order to catch this. Can’t wait brotha 👊
@bcochener Жыл бұрын
Should be a fun one!
@tbarnesout Жыл бұрын
Yeah man, such a great build. Love the attention to detail and the cleanliness of it. Perfect build as always.
@bcochener Жыл бұрын
@@tbarnesout Appreciate that TB. I think it is the sickest chassis (no body) I have seen, minus maybe the DUV coming close. Thanks so much for coming to the premiere as well! I need to do that more often, the live chat was a blast.
@tbarnesout Жыл бұрын
@@bcochenerof course man. Yeah I 100% agree on the chassis. The design of it just flows. You’re going to love running it too, crazy what it can do. Yeah on the premiere I was watching but not going to lie I didn’t find out about the live chat until after the video ended and I took it out of full screen. 😂😂
@bcochener Жыл бұрын
@@tbarnesout haha… too funny man! Well, next time you can chat more!
@manson9083 Жыл бұрын
I've had my hardpark vdub bug since they released them, I absolutely love it. It's my most capable rig out of ten scx24s I have from ackers gecko chassis to a texoma slayer chassis and everything in-between.
@bcochener Жыл бұрын
Wow, that is pretty high praises right there! Loved the build experience and uniqueness of it. I’ll have to compare it to some of my most capable ones, but I think you’re right…
@VetteWay2Fast7 ай бұрын
Wow great build man! Looks amazing with the clean wire management and color match. Really liking this dementor chassis, think its going to be my next project.
@bcochener7 ай бұрын
It’s a fantastic little chassis! Thanks for watching!
@anthonybarto4721 Жыл бұрын
I’m testing something right now and I bet it’s the same thing 🤙🏽
@bcochener Жыл бұрын
Hmm… who knows?
@wingnutbert96857 ай бұрын
HOLY SHINTO!!!!!!! How did I miss this video!!!! That is one of my all time favourite builds anywhere!!!! You just have such a talent for putting parts together. Not just aesthetically but so super cleanly! blown away by those KTech parts. Fantastic anodizing! (I'm an 80's/early 90's mountain biker and an unabashed annodized parts whore!) LOL! And that bug chassis is so nice! Love your builds, but being up here in Canada, it's depressing too as it's not feasible to buy stuff from these makers in the States. 😥 Dare to dream!
@bcochener7 ай бұрын
Hey man, long time! Thanks so much for the kind words. This little bug really impressed me with the build. If you’re digging the K-Tech stuff, I used more on my Roo build. Hope you had a good Holiday, cheers!
@rc_guy_miami9 ай бұрын
OMG, this build is insane! You rocked it out of the park! Cheers!
@bcochener9 ай бұрын
Thanks bud!
@sammyboswelldirtybrc7580 Жыл бұрын
That’s one sic build Brian love it 😍 🔥🔥🔥👍
@bcochener Жыл бұрын
Thanks Sammy, it sure is!
@gibsonlife573 Жыл бұрын
Beautiful ride my friend
@bcochener Жыл бұрын
Thank you much!
@AgeOrmstad Жыл бұрын
Realy sweet smooth rig👌
@bcochener Жыл бұрын
Appreciate that!
@christopherpaluck7375 ай бұрын
This build is AMAZING!
@bcochener5 ай бұрын
Haha! Appreciate that buddy!
@local24_ Жыл бұрын
Loooove the purple 🤙 great build as usual!
@bcochener Жыл бұрын
Oh yeah, it came out looking fantastic in purple! Thanks brother!
@gibsonlife573 Жыл бұрын
One more thing I would recommend if you put a little touch with super glue around those little pieces of brass in the skid plate cuz they do come loose but I am quite rough on my stuff
@bcochener Жыл бұрын
Good to know, thanks for the tip!
@giopirmisashvili55146 ай бұрын
❤
@CiRCuit-Breakers-RC8 ай бұрын
Man this thing looks great. Makes me want to build a comp chassis which is not my norm lol
@bcochener8 ай бұрын
The looks are what drove me to it as well. But now after building 2 HP Dementors, I would still build the third type. They are that good of a kit. Great stuff from HP! Cheers!
@CiRCuit-Breakers-RC8 ай бұрын
@@bcochener good to know. I geek out on building as scale as possible with my rigs and never found a reason to build a comp rig as I don’t really do comps but I want to build this rig now lol. I also want to build a bouncer buggy as that shits fun in the 1:1 world.
@bcochener8 ай бұрын
@@CiRCuit-Breakers-RC I’ve got the new LGRP comp frame and R-Factor body/cage kit for it. Looking forward to that one. Really enjoyed the LGRP Ripper build. Super scale. This new one looks promising…
@DrKrawl Жыл бұрын
Amazing build as always, my HP buggy is on the way!
@bcochener Жыл бұрын
Thanks so much! That’s awesome you were able to snag one too! Fun little build, hope this helps you out a bit.
@snorrevonflake Жыл бұрын
Awesome, now if that was actually available for sale. Everytime i look at their website almost everything is "sold out".
@bcochener Жыл бұрын
Had a big drop last Saturday. Seems HP generally restocks on Saturdays, so keep checking.
@vbspeed7571 Жыл бұрын
Looks super 🤙
@bcochener Жыл бұрын
Thanks brother!
@gibsonlife573 Жыл бұрын
I love hard Park Chad is doing amazing thing but be careful with that skid plate man I broke a couple of them over tightening screws and just big falling off the side of a big rock and they break but he is supposed to be getting them cut out of Delran soon I run actually the cheat code in mine
@rcsteve710_ Жыл бұрын
If you need low blow steering linka hmu! Looking insane 🤯
@bcochener Жыл бұрын
Thanks buddy! I’ll holler if I need one!
@JUSTHAVEFUNRC Жыл бұрын
Oh yeah that thing it’s gonna climb walls. I did have a video request because I haven’t seen anybody post but with the hardbody crawler co FJ. Are you able to take off the doors, roof, side windows and run it as a sort of soft top. Minus the soft tip?
@bcochener Жыл бұрын
Heck yeah it is! Thanks! -and oh yeah, the doors, upper back half & roof are removable. Some guys I have seen build the rear tube roll cage for it. Looks sick.
@bcochener Жыл бұрын
did you see this one I did?: kzbin.info/www/bejne/eYOUYZh4mcSqr7c
@JUSTHAVEFUNRC Жыл бұрын
@@bcochener yeah I did, I’ve been following your work since the wtfj45. Gonna build my own at some point.
@DavidTaylor-qx9ii11 ай бұрын
SWEET looking rig!!! 😍 What do you normally do for NON vented rims to get that SQUISHY effect to the tires? Leather punch to the tires?
@bcochener11 ай бұрын
Yes, exactly that method. Thanks, cheers!
@DavidTaylor-qx9ii11 ай бұрын
@@bcochener if it's not too much trouble, exactly how do you punch the tires? Diameter punch, how many holes per tire, best hole location and does it degrade the tires in any way? THX AGAIN!!
@bcochener11 ай бұрын
@@DavidTaylor-qx9ii I use a rotary punch tool set on the smallest diameter. I do 2 holes on the tread, opposite of each other on the wheel. Doesn’t degrade the tire. If you get water in them and don’t get it out, it could degrade foams. That’s why the 2 holes, helps expel dirt and water.
@bcochener11 ай бұрын
Tool like this www.amazon.com/Revolving-including-Screwdriver-Grinding-Saddle/dp/B06XRDBGY6/ref=mp_s_a_1_19?crid=1LZ602IMMT7CG&keywords=leather+punch&qid=1694469788&sprefix=leather+punch%2Caps%2C205&sr=8-19
@DavidTaylor-qx9ii11 ай бұрын
@@bcochener THANK YOU, THANK YOU, THANK YOU!!!
@rcjoe406 Жыл бұрын
Do you have a link for that magical box 😮
@bcochener Жыл бұрын
😂 unfortunately magic boxes don’t come with any info… other than a nice note from Chad.
@rcjoe406 Жыл бұрын
@@bcochener lol Chad's a nice friend to have
@bdog72627 ай бұрын
Can you tell me the exact length of your upper and lower links? Please I bought a dementor kit but I can’t get the front to work. Seems like the upper links are way too short. I look at your build and I can’t get the same holes to work🤦🏻♂️
@bcochener7 ай бұрын
Fronts: lowers are 50mm, uppers 39mm. Approximately from measuring on the rig. I’m using Mofos BSME on the forward most position with the servo.
@bdog72627 ай бұрын
@@bcochener yep that’s what I got as far as the servo mount. As far as links…. Uppers are 40, and lower 58…. Chad tells me that’s right, but it doesn’t work. He sent me pictures of his using the upper holes in the front with the motor facing forward, but I can’t get them in there because it hits the motor. I don’t get it….
@bcochener7 ай бұрын
@@bdog7262 I think Chad gave you the V2 link lengths. I used those on my DUV, much longer lower that gave a bit more caster. The ones on this bug are the measurements I gave you. I'm not running the motor forward on this VDUB though...
@bcochener7 ай бұрын
@@bdog7262 check out my DUV build. That is using the longer lower fronts. Also has the forward motor on the HP DW1.5 trans. What transmission are you using?
@bdog72627 ай бұрын
@@bcochener hard park DWS
@LARANUD Жыл бұрын
Approximately how much did the hole rig cost?
@bcochener Жыл бұрын
I don’t keep track, but just roughly adding the parts up & both sets of wheels, probably north of 5.
@gibsonlife573 Жыл бұрын
Man I've had a lot of laughs on them both for gears for some reason it's like it's clicking along like especially in slow crawl or downhill I think too much under driver overdrive he's really hurt you
@bcochener Жыл бұрын
Yeah, I’ll just have to see. I watched a buddy’s 50% UD rig run and It was killing it.
@gibsonlife573 Жыл бұрын
I just don't see it out the nsrd maybe on 8.4 Emmy faster stronger I mean it's pretty strong now and it works good but I'm telling you right now that shift RC Servo is a straight monster and I'm used to the mofo cervone which is another monster but literally Fury Tech ESC cannot handle it so I ordered the fight on to see if it can handle I guess I could run a external bec but I don't want to go through all that
@bcochener Жыл бұрын
Yeah that Shift servo is something else! I’ve had good luck with the Ultimate running them or the Pro with NSDRCs BEC.
@odargoo42982 ай бұрын
@Bcochener Now you've sold your first car PLEASE sell me this one!!!