Sea Clear Power | Wiring Harness Install Walkthrough

[@timothykilman9826]

Nathan was great. He called me right back told me what I need for my set up. It only took three days to get my order to Cali. Nathan thank you for the tee shirt. I will be telling every one that attends ABA tournaments about your products. Thanks

[@keikow69]

Purchased this harness for the 3 units on my boat. Holy Smokes what a difference!!! Before I installed this my images were blurry, I would get white dashes appearing on my side and down imaging display everytime my livewell would cycle. I just wasn't happy. Since I've installed this, all of my screens are sharp and clear. I am seeing way more fish on my side and down imaging. My graphs work and show me the detail they were intended to. Completely happy with this product and the service I received. When I ordered, I left off a detail necessary to ensure I received the correct equipment. I received a call from these guys the same day I ordered because they wanted to make sure I received the proper equipment the first time. They also provided me discounted express shipping as I wanted to have it installed prior to fishing a tournament. I HIGHLY recommend this product!!!

[@jes5434]

I took my boat to these guys and holy smoke what a professional job they do my battery compart was messy when I bought it and I took it straight to the to have 2 hds live installed on my 21 ft bullet they stayed longer hrs just to make sure I got my boat in a timely manner and it was on a Friday when they stayed after they would be closed normally all I can say is u want be sorry best place I've ever took a boat for electronics

[@scotwcates]

these harnesses are made for graphs, black box, etc, how do they organize the rest of your wiring in the back of the boat

[@RichardSmith-br5mt]

Fixed my 2 year battery problems. Amazing product and his shop and employees were great worth the drive to his shop in AL.

[@_redrum_x]

8 awg wire all the way from the battery to the unit like this will definitely get the job done! Nice harness.

[@damonbrown9976]

I have been interested in installing dedicated graph harness in my boat so I emailed several companies with questions and concerns. I did not receive anything back from other companies but Nathan( the owner) actually called me and answered every question and concern I had and told me if I had any trouble he would walk me thru install. I will definately be purchasing from Sea Clear. Great guys and great company with top notch support!!!

[@brucesmithoutdoors]

Just wondering. Why put a fuse at the battery and one at the unit/module? Thank you for the video.

[@DanSnyder-xw8be]

Why are you not running a separate battery for electronics? I did and what a difference

[@matthewcarter8481]

so i need a fuse for each graph, and my live scope, but do i need fuses for both of my gt54 tranducers?

[@angelroman9159]

How much of the wire’s insulation do you recommend stripping before installing the connector?

[@scottsasanecki4106]

If I understand this system correctly, all your fuses are not back by the battery in a convenient location but instead stuck under the bow & cockpit where it would be difficult to change a fuse if you ever needed to! This harness seems great and I see the benefit however wouldn't a fuse block at the battery end be way better? I also don't understand how a seaclear harness eliminates the need for a dedicated battery for your electronics? I'm in the process of upgrading my Caymas and I haven't decided exactly what to do. I got 3 lithiums (12volt, and two 36v in parallel with a power pole charge) and I'm wondering if I should get a dedicated electronics battery? And best way to wire everything. Any help is appreciated

[@BillSr.]

Would a fuse panel be better up front instead of inlined fuse holders?

[@zred0106]

Why are you running in line fuses on the harness as well as one the units?

[@jackferguson5348]

In the beginning of the video you mentioned nmea. Does the harness go to a nmea connection as well. Excuse the ignorance on my part. Thanks

[@nybbhUSA]

Can you run this with the power pole charge?

[@crappienaterfishing1198]

.? I want to connect a helix 15 and the mega live to one end in the front and a helix 15 and the mega 360 in the back , can I do that with this system?

[@Matt-dj3tc]

It’s just 4 8ga wires put into a sleeve

[@glenndaugherity6187]

No need for shrink tubing around their connections ?

[@Unwrenched]

What size gauge wire is the 20 inch jumper?

[@scottscaneh]

So when you cut the factory fuse off especially on a Garmin unit have you just voided their warranty?

[@Subarubruce]

You don't send your cradle and wiring in when you send it for warranty🤦‍♂️🤦‍♂️🤦‍♂️

[@johnchapman3225]

Why use a cranking battery to run most of your electronics? Would it be better to use a Deep Cycle battery as the main Power source since those are designed to drain slowly and not pull so much from the cranking battery and potentially shorten that batteries life? Please explain the reason for using a cranking battery? Thanks

[@RichardSmith-br5mt]

It fixed my problems I was amazed

[@jamesonkruger6989]

It's charging back up as you run from spot to spot.

[@BassboatJoe]

When you say hot and ground, do you mean positive and negative?

[@glenndaugherity6187]

Yes he does

[@imtack91]

save your money and go to good stereo install shop, this is basic mobile electronics. the shop will add a fused block and will be a nicer cleaner install- nothing special about this harness unless you like paying at least 4 times more for the same thing...

[@jerryconnett3366]

Agreed. I did some quick pricing using Amazon and the cost of all components is 1/4th the cost. $200 would be more reasonable assuming a reasonable profit.

[@bobbarnhill8557]

You can make your own harness. Pretty easy to do and Waaaaaay cheaper. Check Pace marine wire and do it your self.

[@skitv8780]

Wow, crazy expensive for what it is