Small nut first. Less resistance so you can tighten it in further. Then large to jam small nut on. It’s what I was told when I started building boats and it’s how I’ve done it since and none of them have ever fallen off
@payenbraaap16644 жыл бұрын
large nut first wont fall off either
@repaircollc4 жыл бұрын
I just found your channel and really like your content! Please keep up the good work, cheers!
@SeaboardMarineIncVideos4 жыл бұрын
Welcome aboard! Thanks!
@jamespalazzi79902 жыл бұрын
That's really good work. Impressive.
@SeaboardMarineIncVideos2 жыл бұрын
Thank you! Cheers!
@deeremeyer17493 ай бұрын
So "keel cooling" doesn't require a "header tank" and a pressure cap and overflow/recovery tank? Or apparently even COOLANT?
@wy57083 жыл бұрын
Good mechanics
@danharasty66863 жыл бұрын
Is the whole concept to contain engine coolant ? So heat exchange (chamber) is inside body hull keel ? Huh. I'll be dipped! Cool idea.
@fishamenmorgan75332 жыл бұрын
Is that hull a 38 Dixon?
@zeng218793 жыл бұрын
Qual é a potência desse motor? E a marca??
@reynaldoantoniojr1793 жыл бұрын
whats diameter pls of prop
@mpeters55494 жыл бұрын
How long is that walter keel cooler? 1.5" tubes?
@SeaboardMarineIncVideos4 жыл бұрын
Its been a while, but I think they were about 10-12 feet long and yes they seemed to be about 1-1/4 or 1-1/2 diameter.
@mpeters55494 жыл бұрын
The reason i ask is i have a CPL0970 that i have 4' x 8 tubes @ 1.5" diameter and if i run over 2200 rpm my temp will rise. That is what Walter recommeneded for my 6bta. I think 12' would elimitate that problem. I am set up exactly like in this video.
@stevecarlisle33234 жыл бұрын
Hmmm, no header tank. ???
@bertieperret4 жыл бұрын
Steve Carlisle were do they “add” the coolant, and where does it go when it gets hot and expands.....
@stevecarlisle33234 жыл бұрын
@@bertieperret 🤔
@SeaboardMarineIncVideos4 жыл бұрын
The expansion and overflow tanks are in the cabin under a bench seat at an elevation above the engine and all the plumbing, there was no good spot under the deck.
@elzapinheirocaterpillar9973 жыл бұрын
Caterpillar
@joelandrade41263 жыл бұрын
Eu tenho um barco o nome dele é Adrenalina
@invitro40044 жыл бұрын
nice vidéo...please can you help me to have the OEM harness for qsm11 marine.cant you give your email.i trying to buy the harness and the throttle.the engine is delivered to me with the display only.i need the throttle and the harness.i am in West Africa senegal.the engine come from usa
@SeaboardMarineIncVideos4 жыл бұрын
Please visit our website for assistance www.sbmar.com