Seamless Whip Pan Transition Tutorial in Premiere Pro

In this tutorial I show you how to create seamless whip pan transition in premiere pro. For this we will use standard built-in effects and achieve a smooth whip transition. This video includes: seamless whip pan transition tutorial premiere pro, seamless whip pan transition premiere pro, seamless whip pan transition tutorial, seamless whip pan transition, whip pan transition, whip pan transition tutorial, whip pan transition premiere pro, whip transition, whip transition tutorial, whip transition premiere pro, premiere pro, premiere pro tutorial, seamless transition tutorial, seamless transition premiere pro, video editing, filmmaking, premiere pro transition tutorial, premiere pro transitions, adobe premiere pro tutorial, whip, pan, transition, whip pan, whip pan tutorial, whip pan premiere pro, how to make whip pan transition, transitions tutorial.
🔔Subscribe to my channel for more tutorials: / @smertimbagraphics
💾Download Free Project File: bit.ly/3E6Al2K
SOCIALS
===================================
📷Instagram: @smertimbagraphics
#premierepro #transition #tutorial #premiereprotutorial #premiereprocc #videoediting #filmmaking #transitioneffects #transitions #smertimbagraphics #adobe #transitiontutorial #transitionvideo

[@Speedcubenz]

Brother! No time wasted, no ego, no bs! Such an impressive tutorial. Thanks!

[@SmertimbaGraphics]

Thank you too❤

[@huntskopf123]

No Intro, unnecessary talk, music etc. Straight up to the point quick and easy. Thank you!

[@SmertimbaGraphics]

It's a pleasure, thank you❤

[@superemesean5907]

Shut up

[@Techtinkerer3D]

No intro, no BS 10 minute explanation, just straight to the point. I love it

[@lefamiglia2392]

I miss an intro

[@katrinaignacio-salcedo6638]

This must be the most efficient whip pan transition I've ever seen and the video is straight to the point and easy to understand. Thank you so much for doing this!

[@SmertimbaGraphics]

Thank you too♥️

[@BenMarshallTV]

This was quick and easy! I got it on my first attempt and it mad my video so much more interesting.

[@nsd444a]

Wow this is a really clear and fast tutorial. I appreciate that you didn't add in a ton of filler and just get to the point. (You've converted me to a subscriber)

[@SmertimbaGraphics]

I love straight to the point tutorials myself😁Thank you for the sub💯

[@sebasgnr93]

Fast, easy, cristal clear. Awesome work! Thank you so much :).

[@SmertimbaGraphics]

No problem 😊

[@GeoBase0]

Your tutorials are always easy and to the point without wasting time!!!!!!

[@Mousy94]

Fantastic tutorial. No intro, no fucking about, just straight in, and it looks great. Props

[@johannesm.2911]

best premiere tutorial ever, thanks a lot!

[@SmertimbaGraphics]

I appreciate it❤️

[@postproduction_hu]

I can say the same. Its easy to understand and use these effects after I watched your videos. Thanks for it and thanks for your time to do it!

[@SmertimbaGraphics]

I appreciate the positive feedback😊 glad you enjoyed thank you❤️

[@gd34033]

Fantastic tutorial no messing about. Exactly what i wanted, thank you so much! I will be watching a lot more of your videos!

[@SmertimbaGraphics]

Super glad to hear, thanks for watching❤️❤️

[@nannimwuyep]

This was smooth. Thank you for the tutorial.

[@SmertimbaGraphics]

Glad it was helpful!

[@lifesnapshots1.0]

You are doing very good job. Its easy to understand and take less time. Create more tutorials about transitions thanks!

[@SmertimbaGraphics]

Glad you enjoy, will do for sure😊

[@sodawittea]

Go straigth to the point, easy to understand, tysm !

[@SmertimbaGraphics]

Welcome❤

[@antipov_movie]

Thanks for the tutorial! I recently switched from Final Cut to Premiere, and have been looking for a suitable transition for a long time. But it turns out you can do it yourself in a minute!

[@SmertimbaGraphics]

Great to hear, welcome to premiere pro, how are you liking it?

[@JohanFitFoodie]

Great very useful transition, definitely going to try in my next video 📷 Greetings from a Swede in Beijing 🌆🏯😊

[@SmertimbaGraphics]

Thank you❤

[@ArianaAbedini]

That was amazing. Thank you so much :))

[@SmertimbaGraphics]

No problem 😊

[@invertedworldmemes]

Thank you for this tutorial and including the project file!

[@SmertimbaGraphics]

You're very welcome!

[@justCitu]

Nice effect and amazing explanation ♥

[@SmertimbaGraphics]

Thank you♥️

[@JulioSantirachi]

Really helpful! Thanks.

[@SmertimbaGraphics]

You're welcome!

[@alexbiflex2467]

Thank you! You´re so good explaining

[@SmertimbaGraphics]

Glad you think so♥️

[@emmarojoo_]

Great video! Very well explained and the transition goes straight to the point. Thanks!

[@SmertimbaGraphics]

Thank you

[@lemonexecute]

thank you! working in vertical videos too

[@SmertimbaGraphics]

You're welcome!

[@manglaskove54]

Awesome man thanks a mil!! Top Baller right here

[@SmertimbaGraphics]

Any time!🔥

[@stellarzoneproductions]

Good stuff. Thanks!

[@RomanoMarengo]

Great video thank you!! For everybody struggling with the common problem introduced when you render the video that the offset is not aligned correctly I found a solution that works for me! Make sure that your "Frame-size" is the same dimensions as your video preview width & height. (you can change this in your "sequence-settings". Also make sure that when you export the video that your output resolution is the same as the source resolution. This way the correct numbers for the offset actually works the way it is supposed to work. Hope this helps!! @SmertimbaGraphics thanks again for simplifying and explaining this transition!

[@SmertimbaGraphics]

It's a pleasure ♥️ thank you for the feedback, it is much appreciated 💯

[@dhanu_g]

Omg you saved me. I was going to remove the effect from my assignment. Thanks

[@antibanplay]

this is better than a simple push transition

[@Beets_Creations]

Great video thank you, this will save me a lot of time!

[@SmertimbaGraphics]

Glad to hear it!

[@Nguoimientayouc]

Hi, thank you so much very much for your teaching the transition. Liked subbed ❤

[@SmertimbaGraphics]

Thanks for the sub♥️

[@CaliToTheCrowd]

Brilliant

[@SmertimbaGraphics]

Thanks😁

[@HerbalFaces]

BET!!! Straight to the point let me go ahead and subscribe baby!!

[@SmertimbaGraphics]

Thank you😁✌️

[@NikoR-j5z]

This guy gets it.

[@alquimiagame]

Thank you so much! I was looking for this transition, and is so simple to do! Thanks so much, this save me!

[@SmertimbaGraphics]

Happy to help!

[@originalsuki]

I used for a vertical whip on tiktok and it looks great. Thank you

[@SmertimbaGraphics]

You’re welcome 😊

[@blazehazard2862]

Thank you so much!

[@SmertimbaGraphics]

You're welcome!

[@chumapro783]

Big up Brother cause your technic its so nice🤩🤩🤩

[@SmertimbaGraphics]

Thank you 🙌

[@Onewiththesauce8]

holy smokes how do you guys figure this stuff out id never in a think of that to make a transition, so sick actually!

[@SmertimbaGraphics]

It's actually very simple once you get familiar with how effects work 😁

[@BingerBonger]

Ty

[@dashstudiosHQ]

very nice. Thanks

[@SmertimbaGraphics]

Thank you too!

[@Anthestudios]

King!!!

[@inf3rnis984]

Great tutorial will use in my videos

[@SmertimbaGraphics]

Enjoy♥️

[@phonghoanggia9181]

exactly as I expected

[@YuckMaster]

Thank you!

[@SmertimbaGraphics]

Welcome!

[@yzufardiansyah3156]

Thanks, Simple Tutor

[@SmertimbaGraphics]

Welcome

[@FleyVFX]

thx bwo good video

[@SmertimbaGraphics]

Any time✌️

[@ognjensmigic9556]

Legend! ty

[@SmertimbaGraphics]

It's a pleasure

[@TheKappuru]

merci from france

[@leinzanne]

its 22:26p.m. you saved my life

[@SmertimbaGraphics]

I got you dw😂

[@roadtobufftoni]

Very nice turorial, quick to the point and the transition doesnt look clunky like many others. But for me it doesnt seem to really seem to work after i pre render it. Everything looks smooth in the preview before rendering but after rendering, it only offsets a little bit and then snaps into place which makes it look super wonky. I was wondering if you have encountered the same problem and/or know a solution?

[@roadtobufftoni]

keep doing what you do btw!

[@SmertimbaGraphics]

Thank you ❤ I don't think I have, it rendered fine for me when I edited the preview clips, what settings do you use for export? What's the bitrate?

[@roadtobufftoni]

​@@SmertimbaGraphics I fixed it and now also know why that happened. At first I had the offset keyframed so it moved only 480 pixels. The weird thing is, in the preview it looked like that would be enough to do a full cycle. But like I said, after pre rendering it it would just offset a little bit. So i played around with the offset value and found out that it had to offset 1920 pixels to do a full cycle after pre rendering (Which in hindsight is very obvious). Before rendering its doing 3 full cycles though, which isnt really intuitive. Well, turns out I had the preview resolution set to 1/4 instead of Full, which means the values dont ranslate correctly to the preview screen, unless you set it to Full. So moral of the story: Dont trust what the preview is showing you unless you set it to full resolution lol.

[@SmertimbaGraphics]

Truee, previews are weird, especially in premiere😁 Glad you were able to figure it out ❤️

[@Techademics]

@@roadtobufftoni If I could thumbs up this comment a thousand times I would! Been searching for a fix for hours and this comment is the only solution I found on the internet!

[@InfinityBladeRecollection]

amazing tutorial thanks

[@SmertimbaGraphics]

You're welcome!

[@manhtunguyen1235]

thanks you so much

[@SmertimbaGraphics]

Happy to help

[@BrianPetersen-et1fm]

Amazing tutorial

[@SmertimbaGraphics]

Thank you

[@pocketkey]

[@SmertimbaGraphics]

You're welcome! 💖

[@O.W_Films]

thank you

[@SmertimbaGraphics]

Welcome!

[@mouhamedmouhamedali5798]

thanks

[@SmertimbaGraphics]

You're welcome!

[@InvisibleSPN]

thx

[@DefrianChandra]

10/10

[@brycenie3335]

amazing video, you have my subscribe and like

[@SmertimbaGraphics]

Thanks for the sub!

[@Hermionegoh]

thanks !!!

[@SmertimbaGraphics]

Welcome!

[@flaticon5146]

Looks simple

[@AndresGuzman956]

Is there a way we can save this?? And just keep using it in different videos?

[@SmertimbaGraphics]

You can copy paste the adjustment layer to different projects and quickly re use it that way

[@muunhead]

Please review this tutorial! This edit only works during preview. Rendering this edit always results in a split frame for some reason when using the needed aspect ratio value for a full number of cycles. Unless you're using an older version of premiere pro perhaps? Either way, I really liked your succinct style of demonstation. Too bad the edit didn't work!

[@SmertimbaGraphics]

I have just confirmed that everything works fine after rendered. I am using latest premiere 2023

[@bennetthobbs5989]

I had the same problem, and I came back to this video to see if anyone else did. Following the advice of another commenter, I found that the problem was because of two things -- the offset value was slightly off, and for some reason it is also affected when previewing in lower than Full resolution. To fix it, I stopped my playhead on the freeze frame and then adjusted the offset value until it had completed another cycle. I then previewed and rendered it and so far it's working fine. Give it a try!

[@bennetthobbs5989]

@@SmertimbaGraphics This was a good tutorial. Thank you for posting it! Might be a good idea to add the advice given by the other commenter 3 months ago into your description as this seems to be a common issue

[@muunhead]

@@bennetthobbs5989 also saw that comment and checked beforehand. It's not a preview issue. I was already using full resolution preview. Also, my offset value wasn't off, it actually seems like that's what makes it glitch: as soon as i'd change away from the correct value, the frame goes back to its reasonable placement in the cycle. But as soon as i scroll it back to any correct value for a full number of cycles, it jumps to split screen as soon as i land on the exact value. Before rendering, both typing in the correct value and scrolling till you get there will work fine with the frame. After rendering, it's like trying to attach 2 magnets from the wrong ends 👎

[@muunhead]

*Workaround for anybody facing the same issue:* If you drag your offset value far enough away from the correct value (for me it was about -/+50) and then make the adjustment layer as short as possible on the timeline, then the frame being off is not noticeable as much. It's not ideal but i obsessed over this and found no real explanation or solution to this rendering glitch

[@alienfunbug]

Sorry for the noob question, but can you tell me the difference between this and adding gaussian blur to a default push transition? I'm enjoying this method because I can apply it to an adjustment layer and use it as a preset but, I just want to make sure I'm not missing something else as I learn. Thanks!

[@SmertimbaGraphics]

This way you have more control over the transition, it's quicker to apply, it's a more professional approach overall. But built-in presets are fine to use, they need an overlap between videos though I believe, so not all transitions will look the same based on where video starts or ends

[@michaelchanin]

how to do it vertically?

[@SmertimbaGraphics]

Animate Y value instead of X

[@mattm7426]

When I play in playback it works perfect but when I export it is wrong. glitches weirdly

[@mattm7426]

I resolved the issue. I deleted the offset effect and just moved it using the x value. There is some bug or something with offset

[@barnydillarstone]

Make sure that you're viewing full size in the program window. If not it messes the offset effect up.

[@mattm7426]

@@barnydillarstone Thanks!

[@Skiborg]

OK, This is great, but after rendering, the second clip jumps in certain moment while the transitions lasts... i do not know what i am doing wrong.. :(

[@SmertimbaGraphics]

I've seen people comment about that, but haven't seen the issue myself. I will mention you under the comment where people found the solution though maybe that helps.

[@Gaebs]

The video on the left and right is the same and then just switches. how to i fix that? This might not be visible in yours because you have very similar clips but it does look off if the clips have a very different color setting

[@SmertimbaGraphics]

Either add more blur to the middle keyframe or make the movement faster by dragging the blue keyframe handles inward

[@quifix2506]

1:00 That's called right

[@lumabanneilm.4772]

What about the panning from right to left?

[@SmertimbaGraphics]

Works in the same way, just need to put in different values, that will make it go to the left

[@Walk4r]

jesus mf christ, amazing. subbed.

[@SmertimbaGraphics]

Much appreciated!♥️

[@flyingchicken6171]

The blur still continues after the whip pan transition.. any clues what am I doing wrong?

[@SmertimbaGraphics]

You probably did not set blur amount to 0 at the end keyframe

[@flyingchicken6171]

@@SmertimbaGraphics That fixed it, cheers!

[@realmynameshiro]

ok cool, and how to do it in the other way?

[@SmertimbaGraphics]

Change the values to move in a different direction

[@-.-7712]

i dont have the offset pannel in the effects why ??

[@SmertimbaGraphics]

Not sure, it's a built-in effect

[@tranezalore5653]

i don't have offset panel why?😢😢

[@SmertimbaGraphics]

Offset effect you mean? Or effect window where you search for effects

[@XeniusChannel]

My slide got so messy I gave up

[@SmertimbaGraphics]

Why is that

[@Rei_edits1010]

can't belive i didn't know how make such simple effect 🥲 Thanks, it was very direct and simple

[@SmertimbaGraphics]

My pleasure❤

[@aadityakhaiwal]

w mean?

[@tijankusacic8079]

Why premiere has to make everything so complicated? Vegas was so much easier and simpler to use. No need to spend 3 minutes for one simple transition

[@kodiakcore]

You can make a preset and waste less time

[@cakeinthebath]

thank you!!

[@SmertimbaGraphics]

Welcome!

[@TyroneNelsonJr]

Thank you!!!

[@SmertimbaGraphics]

Welcome!

[@suicune1924]

thank you very much

[@SmertimbaGraphics]

You are welcome

[@ИльяГагаринов-т6э]

Thank you

[@SmertimbaGraphics]

Welcome♥️

[@Shortfilms4idk]

Thank you

[@SmertimbaGraphics]

You're welcome✌️