Sears Tradition Dive Watch Full Vintage Watch Restoration

[@davidbrown2284]

Man, don’t know how this video slipped passed me. My pops worked for Sears as an appliance repair man. 43 years. He loved working for Sears, and I loved going along with him on my summer breaks, working in stuffy basements, crowded closets, all trying to get more life out of peoples appliances. It was a very very hard yet rewarding job for my dad. Unfortunately he passed about 10 years ago. I’ve got some of his old Sears watches, he was pretty proud of them. My favorite one is a blue dive watch. Thank you for your channel, this one brought a couple tears to my eyes sir.

[@raymondpontremoli4500]

I have cute story about losing a small part. In watchmaking school when I finally made it to "Final Review"before graduation I was given a ladies size bracelet watch to overhaul and re-time. All went well until I went to oil the incabloc assembly on the balance bridge. I separated the incabloc assembly and places a small drop of oil on the flat side of the cap jewel. I then tried to pick up the cap jewel and place it into the setting . I heard a small click and "poof" the cap jewel was gone. I was panicked, knowing if I didn't find that jewel I was going to get a ration of shit from my CWM who I was training under. After searching for almost an hour and pretty heart broken I decided it was time to "come clean" and tell Bob, the instructor that I lost the cap jewel. I went to him and told him and as I expected I got the ass reaming of my life. So, once he reduced me to a puddle of tears...he asked.." If I find the jewel for you are you willing to buy me lunch for a week.??? I said..."Hell yes, I just want the cap jewel back"....He said, lets shake on it...so we did. So I said....Ok, find that damn jewel so I can get my blood pressure and heart back to normal. He said, "sit still and don't move a muscle no matter how close I get to you"...I listened to his instruction and sat there. He reached up with his little finger and touched the bridge of my nose and showed me his finger with the cap jewel on it. It flew out of the tweezers and landed on my nose. The shitty part about this is the entire time my instructor was talking to me he was looking right at the cap jewel....That bastard saw it....and then conned me into buying him lunch knowing full well it wasn't lost at all.....Ture story...

[@romang9629]

What an amazing story lol

[@lhaviland8602]

Sounds like a real dipshit. It could've fallen off and gotten lost for real before he could complete the 'prank'.

[@davecomstock6933]

LMAO!!!! Great story and what a really good instructor he was!!! LMAO!!!

[@richardhutchison3123]

At least he told you that he found it! The lunch was just a teaching moment! I mean, what you have done if you didn't locate the cap jewel?

[@philgallagher1]

.... And even though he knew where it was, he STILL chewed you out! What a d__k!

[@motaz1975]

am i the only one who finds these mechanical watch restoration videos relaxing and hypnotizing to watch?

[@WristwatchRevival]

Based on the views for these videos I suppose not! I'm just glad other people find it as fascinating as I do.

[@kevinokeeffe9219]

No, me too!

[@Winston.S.1984]

I feel the same! These calm restauration videos are a welcome escape from our ever more hectic and digitized daily life - especially in 2021!

[@sheemondallasgeorgia]

No, you are not the only one. You have at least one more person on that list. Me ;-)

[@stemikger]

No, I'm in the same boat. I find this fascinating. It's like a mini universe

[@baseballfan9848]

What sets you apart from other Wristwatch Repair channel is your commentary. The explanations, the processes and procedures to setting the parts back in place excellent.

[@dr.saleemali6228]

Agree completely .

[@NotWorthIt9]

Possibly the most amazing video I've ever "watched". It's nearly unfathomable that someone has the skill, time, and patience to succeed at such an undertaking. I am in awe.

[@contrariandealer3466]

He only had the time after he finished restoring the watch…

[@davebarrowcliffe1289]

Divers watch... "unfathomable"... I saw what you did there... 🤣🤣🤣👍

[@Redspeciality]

Check out Jason at STS Telecommunications, he repairs Iphones, it makes this look like rebuilding a V8 engine - soldering an IC chip with 15 pins thats the size of half a grain of rice is unbelievable

[@luisloya1120]

Wow, wow, wow!!! You sir are truly an incredible artist. What patience and skill. Thank you for taking me along this project.

[@mikefigures5541]

I got this watch for Christmas in 1972. Really nice seeing one like it again. They retailed for $50.00

[@ronaldcrenfro4637]

HE BOUGHT ON EBAY FOR $450.00

[@jaskey]

1972's $1 is equal to 2020's $6.23. So a $50 watch would be about $311.50 today.

[@mikefigures5541]

@@jaskey someone earlier posted that the watch in its former state of disrepair was purchased for $450 from an online seller.

[@jaskey]

@@mikefigures5541 Yup I was doing the math on if the used watch cost more than when it was new by taking the inflation into account. Turns out Rolex isn't the only one that appreciate in value. 😆

[@stopthephilosophicalzombie9017]

@@jaskey It just goes to show that all these watch videos are causing a market bubble. 10 years ago these vintage watches weren't moving at these prices on Ebay.

[@PaulBletzer]

Marshal, another great video, and I found it today while I was restoring a 70’s Olech and Waj Caribbean 1000 dive watch that I bought as new old stock from Mr Waj himself in the late 80’s. He was selling watches online to people through word of mouth and then building the watches from stock he had left over from the 70’s after he received payment. I had wanted to purchase one of these when I was in the service as they were a popular item with servicemen during the Vietnam era, but the PX was out of stock and never seemed to have one every time I went back to see if they were back in stock. I love this watch as much or more than most of the high end watches I’ve owned. I’ve just finished doing exactly what you did to the bezel and it came out looking like beautiful. It took me 2 1/2 hours to get the mainspring arbor back into the barrel after installing a new mainspring today…I actually lost the blighter 4 times from it flying into space and had to carefully comb my carpet with a magnet I use to find parts I lose. But I stayed patient and finally got it done and am so happy and proud. Once again you’ve given us a wonderful and informative video and I’m extremely happy I’ve found and followed your channel. Thank you once again..Paul B.

[@blurayauthority]

I kind of didn’t want to like this video, but I did. I enjoy your humility and like that you’re not afraid to say “Ok, I learned something. This is neat. I enjoy this.” It makes it fun for those of us that don’t have the drive to take on something like this. Well done.

[@hobbyaddict9908]

I know this video is 3 yers old but GREAT JOB!!

[@ZacVaper]

Now that's a true revival of a vintage watch...and very satisfying, too. It looks like a well taken care of, vintage watch. Maybe next time you can show the lume charged, in the dark.

[@WristwatchRevival]

Good idea, I'll do that.

[@juniorjohnson5961]

I was looking forward to seeing the loom

[@Virkash]

@@WristwatchRevival I suggest investing in a small UV light, a lot easier.

[@angelarch5352]

Need to see the LOOOOM!!!! :D

[@bradholmes607]

top tip for re luming vintage watches, mix your coffee in with the binder+ lume to get a even finish

[@metatechnologist]

I would have left the hands white for visibility.

[@josephkratz551]

Great Job on your first case restoration! it looks really good. My tip would be to use sand paper attached to a thin piece of metal or a popsicle stick for flat surfaces, and sandpaper wrapped around a piece of peg wood for the sides of the case. this way you can achieve the same brushed effect while keeping the edges sharp. Keep up the good work!

[@WristwatchRevival]

I mostly did. I used the sandpaper sticks as well as the steel block for most of the flat surfaces, with some handheld sandpaper too. I'll definitely keep it in mind! Thanks for the advice :)

[@dustinpierson490]

That's what I was thinking too when watching this. After having polished firearms and watch cases for a while it's pretty important to keep flat edges razor sharp. It's easy to round them a bit while holding any polishing media with your bare fingers.

[@TristanColgate]

That is a truly inspiring result for a watch that would probably be written off as a "department store" watch! Simply stunning!

[@mauriebarnes8272]

This channel is required viewing for watch collectors. Great content! Excellent restoration of the piece from the 70's

[@conzmoleman]

This is your most astonishing restoration. I can’t believe how gorgeous it turned out!!! Whoever acquired this one from you is a lucky person indeed

[@paulvon2378]

Says a lot about Sears and the quality items they sold back in the day.

[@sumplais]

@@paulvon2378 Like many Sears branded items, these were actually made by someone else for Sears. This "Tradition" line was made by Heuer.

[@Agrippa31BC]

And you’re a hobbyist...that’s some pro level job you’ve done there!

[@WristwatchRevival]

Baby steps!

[@mrlazli]

Indeed! I was shocked how amazingly the whole watch, especially the bracelet turned out!

[@garysmith7545]

After watching quite a few of your videos, I was happy to finally see you do a real case restoration. I think they end up being "more exciting" when you take something that really looked like a dog, get it running and get it back to looking like new. OK, I understand there is a fine line between those pieces where this makes sense and those where the piece looks just fine if you leave it alone but this one looks great! Good job Marshall!!

[@22Phantasm]

Hi Marshall. This is your masterpiece. Amazing work, gorgeous video and simply a wonderful result. It's such a pleasure watching your restorations.

[@joaquingnunez]

Thank you …. Because of you and your channel … I have gotten into the art of watchmaking… in the process of getting my tools and learning the trade… Thank you ..

[@FORGOTENcreatr1]

I love seeing shots of the other watches he's restored on his wrists.

[@stuartcole4845]

With regards to the coffee to age the lume, I’ve seen other watch makers actually add a tiny amount of espresso directly into the lume mix rather than apply it later on top. That way you can be sure it won’t come off over time when it dries out and will be “fixed” in the lume

[@tadana]

We can see how he evolved from this one

[@WrenB111]

Sears was the Amazon of my generation.

[@WristwatchRevival]

haha fantastic way to put it. I wish I would have thought of that description for the video now :)

[@OX71]

Sears and up here in Canada, Consumers Distributing

[@davidrasch3082]

Remember the Christmas Toy catalogue. I wanted everything....

[@mpruitt756]

@@davidrasch3082 me too!

[@davidrasch3082]

@@Bry.L Grew up in Chicago and know Woolworth well. They were the 'go to' store.

[@scottperine8027]

Marshall I want to sincerely thank you for introducing me to the utterly fascinating and mesmerizing world of watchmaking. You my friend have a calming and soothing voice,never losing your optimism while you navigate the pitfalls that lurk sometimes in the unseen world of a watch case. Watching your tutorials has enabled me to take the dive and jump into watchmaking with my new found love for horology that I never new I had. Again thank you and please keep teaching the wonderful and informative classes that you lead.

[@xKold]

Please continue the additional restoration stuff (when necessary). You do amazing work 🙏. Love the attention to detail. +/- 0s a day is a sign!

[@bereadyeveryday6764]

Of the several rebuilds / services that I've watched you do, this may be the most remarkable. Beautiful watch.

[@BW-kv9wj]

I used to love going to Sears in the early 70s. The Sears catalog was the best. Montgomery Ward too.

[@bjw4859]

This has to be one of the most calming channels I watch, don't get me wrong, I don't watch it to help me doze off, but it can help, lol, but if you've had a stressful day, watch one of these videos accompanied by a good single malt, better than therapy, if you're not into spirits, a peppermint tea will do the trick, thankyou for doing these videos.

[@maxleadleybrown]

An excellent video; your camera angles are really clear and it is great hearing your monologue! thank you!

[@Kingstonsmac]

You have no idea how satisfying these videos are. I own over twenty time pieces and they all have different meanings some more than others. These videos have made me fall in love with my little hobby all over again. Thank you!

[@peekaboo4390]

OMG, as a guy who makes his living fixing and restoring everything from cars to guitars, I thoroughly enjoyed every second of this restoration. What a great feeling it is to get things to look and work perfect again... hats of to you. I am also curious to find out what microphone you are using for your dialog... it sounds great.

[@volvo09]

These watches are really interesting. Just like microscopic wind up engines. I love the mechanics of it.

[@triplex86]

Fabulous vid - I, for one, would really like to see more videos where you do a full restore of everything. Thanks for posting.

[@moosewerk356]

I absolutely adore these videos! I think the next step in your production process could be a better lit photo booth for watches with a display stand and some neutral background. The final shot of the finished product seems crucial here and glare from un-diffuse lighting really does your work a disservice. Whether or not you do that I'll keep watching! Keep up the good work!

[@idotry]

As someone who wants to get more involved in fixing up watches I love how I'm along for the ride in your learning process

[@pfg_pedals]

Polishing is easy, just tedious. Just start with the lowest frit that gets out the largest gouges, then work up to finer grits until you reach the desired finish. Use a brush wheel for brushed finishes or use a polishing compound and cloth or wheel for more finish.

[@johnvaldez8830]

What I really like was the way you figured out how to preserve/replicate the patina of the watch hands. This was something that I was wondering about even as you looked over the watch. I'm so glad I watched this video because of that.

[@rapscallion3506]

I’m mesmerized by this work but I’ll be damn figuring out where everything goes back together.

[@luiscastro5456]

use reverse engineering man, haha

[@gennesta9296]

@@luiscastro5456? is that reverse psychology for the idle hands ??

[@MrSkoobii666]

Im the same.. I can pull half a car apart to repair whatever it I need to repair then put it back together.. but I reckon I'd be stuck putting 1 of these back together. I guess it would all come to you with time and experience.

[@matthewsykes4814]

Wow she's a beauty and still has a heartbeat despite the damage. I'm no watchmaker or smith, dad was a smith for a little while. It's wonderful to see old/abused time pieces brought back to life by skilled hands. Yourself and Nekkid are amazing, hands so steady a surgeon would be jealous.

[@charlesflint9048]

I just love these videos of restoring watches.

[@RomanPeacock21]

I love, LOVE your honesty admit not knowing and bring an amateur etc. That's honestly the best

[@Supercruze]

Take your Scotchbrite pad and put int on a flat surface. Set down a paint stir stick or a long piece of straight edge like a yard stick or ruler and clamp it to the table top using two quick claims. Then take your bracelet and run it in one direction using the raised straight edge as a fence to run the bracelet or case against for straight lines. Works very well. Buy different grades of Scotchbrite pads for different grain. I like the ultra fine gray pads but have used the green and burgundy for coarser grains. Super cool project and great outcome.

[@coppernesher2791]

This is possibly the BEST wrist watch restoration I have seen on this channel! Exceptional work! I bet Lou would be proud 😅

[@MartinOcando]

I have to be completely honest with you. I love your videos. I can easily spend hours watching them, but I usually fast forward the movement disassembly and reassembly parts. I just love case, bezel, dial, hands, and bracelet restoration much more than the actual movement. And this video just made my day today. What a fun and amazing restoration you did here. Please do more.

[@panama-canada]

Great job restoring this piece of history.

[@HorseFromHell]

I felt like you were looking at someone’s heart, “yup they are still alive”. Watch out!!!

[@Dakktyrel]

Coffee is fun as a dye. There are paints that accomplish the same thing that miniature modelers use and they are called 'washes'. They come in all manner of colors to choose from. Excellent video.

[@Alias_Anybody]

Did you put a new gasket on the crown/stem as well? Or is it just not really possible to properly waterproof it?

[@WristwatchRevival]

There wasn't one when it arrived, so I haven't replaced it. I did order an assortment of them to see if I can put one in there, but let's just say I'm not taking this thing surfing any time soon ;)

[@joedirt1927]

Your videos are great! I've been going back and watching the older uploads. Absolutely fascinating! Your narration has got to be some of the best I've heard on YT. Keep up the good work! Loved this restoration!

[@ronl7131]

Sears sold some high quality cameras also: Tower brand....high quality lenses...even high quality Leica “copies”.

[@stopthephilosophicalzombie9017]

Sears was a behemoth back in the day. Sadly with Sears so went a vast amount of economic power.. The U.S. is not what it once was either, as evidenced by the whiny SJW factions peppering the landscape. (Btw, Amazon isn't an apt comparison. They and Walmart are a parasitic enterprises in the worst way.)

[@romlyn99]

Wonderful job! So glad to go back and watch your older videos. I only started watching you in late 2021. So glad to watch the first full restoration. You did a beautiful job.

[@philiprice7875]

i only "found" this channel last month and like everyone else i am gobsmacked at everything involved, now i use it as therapy, to unwind

[@icerich11]

By looking at how dirty the watch is, I bet you can extract the original owner’s DNA from the watch and clone the owner if you wanted to.... 🤣

[@WristwatchRevival]

Some terrible version of Jurassic Park forming here

[@icerich11]

@@WristwatchRevival really an amazing job! Give the watch a new birth! 👍

[@nunyabizness199]

Mmm, yummy arm cheese !

[@paddymulligan]

Please clone the restored watch. It looks fantastic.

[@jasonbean5052]

Thanks for the work you do in putting these videos up and making me see how interesting this hobby can be. My goal is to get a few basic tools and start working on some vintage watches myself.

[@mgrsdgfsdafsdgrsdgfsdg6980]

Before the age of the Internet, a friend of mine (he was in his mid twenties) inherited 3 vintage Rolexes (I believe one was even a Paul Newman Daytona). Because of misinformation and his naivety, he stupidly bashed them with a hammer (because he had no way of opening them) believing the value was in the "jewels" or rubies contained therein. After the deed was done, he went to a jeweler with his cache of "valuable stones" thinking he hit the motherload. I assume he was told the reality of the situation, as the next time I saw him he was void of expression. I can only imagine what they would have been worth had they stayed intact. I cant recall what models they were (besides one being a Daytona), but he did say after researching them, they were extremely valuable due to the lack (or inclusion), of text on the dial -- I cant recall which. Goes to show you just how much people were "blind" due to lack of information.

[@poulwinther]

Shocking to say the least! I can't believe he didn't even get them assessed first.

[@lordbogus6709]

This story really saddens me, such supidity... Those vintage pieces would be so magnificint... somebody probably cared and loved for them, how stupid that must sound when talking about lifeless objects. So many stories, people especially back in the day wore watches for decades especially expensive one's like Rolex's. Can't image smashing things you got inherented... Even if there was millions worth in gold inside something I inherented I would NEVER smash it.

[@lordbogus6709]

@@poulwinther Somebody smart would have gone to a watchmaker to get them opened. He probably wasn't smart

[@WatchmakerErik]

I loved getting to see you so your first full restoration including the case and bracelet! Superb.

[@janeyannachicken9053]

So, "Hello IT -- Have you tried turning it off and on again?" becomes "Hello Watchmaking -- Have you tried taking it apart and putting it together again?"

[@dr.davidmiller6682]

It’s a pleasure to watch you work. It’s actually meditative! Great patient demeanor and light hearted tasteful commentary. Bravo!!

[@deathproofpony]

"Lou" didn't take very good care of his watch.

[@WristwatchRevival]

It looks like Lou wore his watch every day but never really bothered to take it in for service yeah. At least he got his use out of it lol

[@knottreel]

He was a louser.

[@richardgaray9979]

LOL

[@jeeperspeepers8323]

Lou’s probably wearing a Rolex in heaven right now.

[@potgieterl]

@@jeeperspeepers8323 Na got a swatch.

[@MrKitkennedy]

you only restorer i can listen to right through......well done

[@ReiMonCoH]

Awesome 👍🏻 Original condition is a joke term if it’s beat to shit. “Originally”, it was new and shiny and awesome... not yellowed and banged up and nasty

[@aib0160]

So glad to see you did the case and strap. I see little point having a lovely clean movement that you never see in a tatty old case. Much better to have something that looks smart and you're proud to wear.

[@WristwatchRevival]

I'm glad too, it's always a tough decision.

[@Billo1281]

My father had a watch like this in the 80’s. My mother bought it for him. Great memories. And it’s truly astonishing watching you work on something with such tiny parts! Amazing.

[@steelhorseman6883]

I found your channel by accident, I really enjoy it. I really miss my old watch my grandparents gave you years ago.. I can't one like it now.

[@proper_gander3608]

Great job. I'm a suckered for a classic diver's watch and this is a beaut. Thank you for saving this one and sharing it with us. Wouldn't it be wonderful if Lou and the watch could be reunited?

[@KingParzival]

I hope you do more of these soon Marshall, your videos are legendary from day one. Absolutely stunning.

[@marshallpyatt5425]

Amazing job. I am glad you took a chance on a full restoration .... paid off well.

[@wapettay]

I really enjoy the work on the movement, but I absolutely loved the refinishing of the case, bracelet, hands, etc!! Well done!!!!!

[@samhackney5977]

Glad to see you’re doing a complete restoration. I enjoy seeing vintage watches as they looked when they were new. Thanks for the great work your doing.

[@donbrubaker]

Unbelievable! That turned out SO well! Look at that amplitude and rate!!! Wow!

[@west_nebraska_dude4527]

Spectacular ... So many people simply disregard items that were made for major chain retailers' private labels in the 50s, 60s and 70s (Sears, Wards, Kmart, even Gambles) but they were most often made by industry leaders and were generally high quality. Thanks for sharing this amazing resurrection!

[@caseydarrah]

Indeed. Sears Craftsman padlocks were made by Abus, which is a powerhouse brand in Germany. Their knives? Schrade and Camillus, both powerhouse American 20th Century brands.

[@vjsseafoodmountgravatt9568]

In a world of 10 second grabs and high turnover this is so satisfying to watch. Thank you for making this!

[@michaelfiandt9329]

I have to admit, this video auto started after a different video I watched while repairing my daughter's watch. It started playing in the background while I finished up and within a few minutes I was engrossed in your video and forgot all about what I was doing before lol. I cannot believe how much I enjoyed it! Great job, very entertaining and very cool!

[@masketuferran4637]

Hats off for you, sir. You made my day with this video. I really appreciate the effort you did with your work. Being a lover off swiss watches I really like the way you handled your work, even not being a swiss proffessional you did an excellent job. Mention how well equipped you are with all your equipment. I've worked for 40 years as a milling machine man in rubber industry, making moulds and all this stuff, and I really love the fine mechanics done in the construction of a swiss watch. Again thank you very much and you have another subscriber for what you need.

[@geoben1810]

Wow, I reported to boot camp at Great Lakes Naval Training Center in Illinois on the 29th of December 1973. In the dead of winter. I was 17 years old. I wish I had been into watches back then. I most likely would have bought one of those. And a few others of the time. Thanks for the videos Marshall. 👍

[@drcbeartooths]

Marshall - another remarkable transformation and engaging video! Thanks. Sometimes I play a WR to have your soothing voice and interesting stories nearby my chores or cooking. Funny how often, as a non-practictioner, I step quickly to see a bit that you're excited or unsure about. This Sears piece is from my HS grad year - wonderful you brought it back. Great job - see you again soon.

[@paulbuckrell1979]

I have a Tradition de luxe, automatic. 25 jewel, 20atm, incabloc. I hadn't worn it in about 20 years, but this vid made me get it out again. Still runs like a top! Thanks for the reminder!

[@scottieray]

I worked for several years as a CNC Machinist and these TINY intricate watch workings just fascinate me.

[@ikeman5774]

WOW, Super impressed. Fantastic video. The restoration gave this watch an amazing look. I have heard you say, in other videos, that your just an amateur. Not in my book brother. Your attention to detail and the precision with the tools you operate with is exemplary.

[@murraykriner9425]

Really appreciated your restoring this timeless classic of the Sears & Roebuck line. You did an amazing job putting it back in excellent trim, despite the initial ill's that it had. So happy that you found the trouble with the hands. Warmest regards.

[@Penfold8]

It's really interesting to see the jewel on the balance spring almost pulsate like a beating heart.

[@MrZomg17]

There is something very mentally satisfying about working on and watching work being done on watches and small objects

[@bobdefalco]

It's fun watching these earlier episodes. You have always been honest and it's amazing.

[@Oli-Train]

That is the best restoration of a watch you did! Congratulations on your impressive work! 🤩

[@billylum3243]

Fantastic work, Buddy! Amazing skills and I absolutely love your voice .. like a radio deejay. I've been given two old SEIKO "5s". One is a 6309 which I've resurrected but it has a problem with the keyless works (not my cup of tea. Taking apart the Calendar works terrifies me!) The Crown detaches! . The other one is a 7009A. It stopped as debris like cloth lint or cat fur? entangled on the balance wheel. Took it apart and cleaned it. Works fine now. Just got the legendary, discontinued, SEIKO Diver's SKX007J. Wearing it now. A real stunner. Safe greetings from Kuala Lumpur, Malaysia.

[@robertgendernalik4360]

I am amazed at your camera work and editing. I can only imagine how many hours you put in editing these videos. In addition your commentary during these videos is very impressive. Love watching. If I had the extra cash I would have no problem supporting you on Patrion.

[@fabriziodutto7508]

So beautiful watch!! Another little treasure! I think, with the leather strap is just gorgeous! Thank you for sharing!

[@unclefweddy]

I've got that exact watch; I'm wearing it right now... 17 Jewels, still runs perfectly... yes, I bought it at the Sears, in Beloit, Wisconsin, in the '70s.

[@fun_at_work]

That was beautiful. Really appreciate the craftsmanship

[@sammychiba86]

Its beautiful even all scratched up

[@billmedic1995]

I JUST picked up a Sears labeled dive watch from the 70s that was made by Sicura. Cool seeing you work on another Sears watch the same week I got mine!

[@nyckhampson792]

Lovely watch , bezel came up a treat ... Another turnaround for your excellence Marshall Love this channel

[@nateb176]

love the restoration of this watch. I think my grandfather may have had one of those, maybe. the before and after of this is incredible. fun to watch.

[@Randyolsson]

Those hands were SPOT ON, amazing job

[@cedarcanoe]

I wanted to congratulate you on such an explanatory video, so interesting. On going beyond what you did so far (case and bracelet restauration, reluming the hands). I love the result as well, a work you can be very proud about!

[@RaivoltG]

It's crazy how many tiny parts are in a watch! There is no way I'd ever get all the parts back in the right places! Very cool videos!!

[@silverhairseeker5539]

Being an avid diver my Mother bought me this same Traditions watch for my 15th birthday (1965). Worked great for a couple years then quit running. Took it back to Sears for repair. Took 2 months to get it back and when it came back there was a note stating that the watch was no longer guaranteed water proof. I went out and bought a $25 Timex and never wore the Traditions watch again. I do wish I'd kept it though considering how much it's worth now. Great Video.

[@emrekentmen]

It is like a therapy to watch this video, perfect presentation !

[@nononsense2688]

I am a beginner watchmaker, soley inspired by your channel. But thought id mention that ive been painting with coffee for over three years, not as a main medium but for fun. Its actually a really versitile "coloring agent." Can get a lot of shades and a lot of grainy detail in painting. Cool to see it used on the hands.

[@LFGM24]

Cool thing about your restorations is that you talk through the process and give tips. Many other watch restoration channels do great work but don’t talk. They just caption. Still cool but I find yours more educational. 👍🏼👍🏼

[@GraphicDesignerStephen]

I was SURE you’d replace the bezel, so seeing it restored was a fun surprise. Another amazing video!

[@DesmondBedarte]

As great as the skill you show to work with this watch, you also show great skill with filming and narrating the video. As someone who is not generally interested in wristwatches, I watch this video with much interest the whole way through and enjoyed the entire thing. Thank you for your great work and skill putting this together.