SEAS Norway factory visit December 2015.

Two 15 year old, middle school pupils spent a workweek at SEAS. They made this great video showing the artisan work making high end loudspeaker drivers at SEAS in Norway.

[@timbre7999]

SEAS speakers are truly brilliant. Keep up the great work, I have so enjoyed your products for decades.

[@Ronnymikkonen2686]

Yeah they are really fine driver's. Love them too.

[@zogzog1063]

Message to the workers: I hope you take pride in the fact that your work brings so much happiness to hundreds of thousands of people. Well done!!

[@alanrogs3990]

Well said. I hope they see your message.

[@philvale5724]

Hi, 👋, I built a pair of transmission line now speaker cabinets about 40 years ago, and last year, I fitted 4 new sets of your speakers 🔊 , cannot remember the serial number at the moment, 8” subwoofer, and a pair of tweeters, i’ve purchased these from Soundimports from the Netherlands, I found this company very helpful, And very impressed with the sound quality, My cabinets are quite big, they stand about nearly 1-40 Mt in height, Approximately 14 foot line length, and they sound more amazing than what they had did before, Phil from the moulin France

[@danedewaard8215]

This is a high quality speaker manufacturer! Possibly the worlds best!!!!!

[@Ronnymikkonen2686]

They were the first serious speaker manufacturer and research laboratory. They have since beginning always been best.

[@Acoustic_Theory]

SEAS speaker components are in the top two or three brands of speaker components for sound quality and consistency. The engineers and the human operators care about what they are doing, and they know what type of results they are trying to achieve.

[@johnsonrumnong4248]

i love to hear a good sound quality

[@seaslyd]

I love SEAS speaker!

[@rixvspinner]

I own a pair of Scanspeak .15 L speakers which are basically Dynaco A35's on steroids. They have Seas/Scanspeak drivers. The Dynaco's or other speakers of that period always benefitted by using SEAS drivers. Then Mission used their tweeters in the Mission 770 which was one of the next level quality value speakers. I know since I worked at a stereo shop in Ontario that was the first to sell Mission products. You can spend less and get great quality which is what companies like SEAS facilitate. SEAS could produce very highend drivers used in speakers that cost 10's of thousands of dollars, but they don't. Hats off to SEAS.

[@ARGBlackCloud]

I Own a pair of Linkwitz Orion's , using the Seas Excell 7" Mg and Excell Tweeter , both those are excellent speaker drive units !! Love the crispness and clarity !!

[@m1dn1ghts3w3rr4tzzz]

I had SEAS tweeters in my home speakers back in the day. Man, this music sounds excellent on my $10 logitech computer speakers, I'm shocked! Missing the bass, lower midrange, but otherwise, wow!

[@simonvi3512]

Excellent acoustics. Especially the car "Lotus" series.

[@Hesbonful]

Very interesting, a simple 4 to 8 man factory... good👍

[@runner0075]

They do amazing speakers: quality and reliability

[@flashbacks7892]

I had at one time: Seas Lotus car audio loudspeaker components, never had to chance to install them as I had to sell all of my car audio stuff at that time as I had alot of car repairs, was going to build a complete SQ sound system, never came into fruition, Seas Was my dream system.

[@echahbinabil1980]

wooow very nice .i like these place . SEAS is good qualite speakers

[@Solus793]

World class.

[@EXCELLENCEACOUSTICS]

The best speakers ever.

[@bobbg9041]

Close but not the best. Its in the top 100

[@stallion63m35]

@@bobbg9041 Not in the top 10?

[@joeygonzo]

2:22 solder fume exhaust so the worker does not get cancer. Props.

[@johnsweda2999]

You make some of the best drivers in the world especially your cloth tweeters what I found there was a trick to make them even better ...

[@stallion63m35]

Like to share what that trick is?

[@dncviorel]

@@stallion63m35 "I shall not share!" :)))))

[@stallion63m35]

@@dncviorel Why not?😥

[@donalm7874]

Who is the music by.

[@michaelg9685]

Best for Jazz, Bossanova, vocal, saxophone, cello and violin.

[@jerrypartington3650]

That's like saying Sony TVs are best for news, current affairs and drama.

[@ManiVaas]

@@jerrypartington3650 Actually it's true, few speakers are good for few Genre, this might not be the case thought

[@rickylok6889]

family own factory?

[@300ZCorradoVR6Z]

I love Seas. I wish their low frequency transducers had higher mechanical Q tho.

[@user-hu4ez6ew2q]

Mr. Why you love Seas? Seas woofers made absolutely stupid people! All own history Seas made extremely low Qms drivers and used very little magnet system, cheapest basket.. Seas think 🤔 only about maximal profit, only about money 💵! Because made marketers, no engineers!

[@user-hu4ez6ew2q]

For good woofer need extremely high Qms 20-25, and extremely low Qts 0.1.

[@jharloe]

Aren’t their speakers in sonus faber?

[@mailsoundace]

Which city is your factory in Norway?

[@farmpro1234]

Hvordan lager dere indre oppheng? Og hva er de lagd av?

[@javymolina9876]

Muy buenas bocinas ,

[@zsoltd1004]

GLOVE?????

[@robertkiss7003]

Rei-ntroduce the Argon speakers! If the Dane’s can make the bespoken large midtone, i don’t see why SEAS can’t reintroduce it again.

[@Ronnymikkonen2686]

TV GV special.

[@frankh40yearsago.99]

Notices the difference between Chinese factory that make drivers.

[@AlienSexGod]

Yeah what differences? Higher quality materials.. white people and ?

[@Nightjar726]

@@AlienSexGod and no slave labor being exploited by the government. Yes we care about human beings

[@user-oxx787chexx]

to order speaker speaker paper according to my parameters 500 pieces

[@internationalmasterspeaker1879]

Wow idol ok

[@logotrikes]

Looking at the production methods of this mob, they don't seem too different from a Chinese speaker assembly plant I watched previously. Speakers are a mechanical device and the super important method of centering the voice coil appears to be the same in both cases. Basic materials used will be similar, glues the same, and provided that jigs and fixtures are accurate then I would expect a similar result from either. In other words the Chinese could easily emulate any of the famous brands, but don't have the cred. My Fostex speakers are now made in China, but I expect them to sound the same as a previous pair of Japanese Fostex I used to own...

[@PATISHAH]

there are a lot of work in engineering and realisation of this engineering... all work after, is also important... i wish seas would be cheaper, but all these workers must have good salary, because its Norway and these people do a good work on their places... and you can not just emulate this... its not a software... there is serious scientific work on the background... you only can steal their tehnologies...

[@ghostrecon3214]

Ever see Focals tour?

[@collins7676]

Основное ноу-хау производства - материалы. Остальное достаточно обыденно

[@pliedtka]

A friend of mine 'does' limited series Hi-End custom of drivers in China. You can get make top quality, but one has to be ready to pay for it, and it is hard to find manufacturing house that is able to build what you want, if it's something different than the norm. The Seas is just like other manufacturers.

[@antoniojoseandreomartinez9710]

🙋👍❤️👌👌

[@RedHell2884]

Hi I am looking for a twitter for AR speaker model is V218 bookshelf .. how? I live in Saudi Arabia. Thanks

[@nelsondog100]

Is AR a loudspeaker brand and v218 is the model?

[@RedHell2884]

@@nelsondog100 yes sir

[@RedHell2884]

Acoustic Research AR Speakers

[@forrestkam4826]

I love Seas , I Love Mountains, ILove Music, I Love All Kind Of Living Things , So Don't Eat Meat ! That's Call Great Love !

[@ManiVaas]

Love your name :-) Forrest

[@logotrikes]

The way speakers are made doesn't seem to vary much regardless of country of manufacture, which is why the stigma of Chinese-made speakers is largely unjustified in my view....

[@user-zn5zz5iu9n]

ㅇ+

[@AlienSexGod]

What guitar track is this ... just beautiful......