SEAT HACK How to turn twin passenger seat into a single seat campervan conversion

SEAT HACK how to turn twin passenger seat into a single seat campervan conversion #vanlife
Cutting Passenger Seat in half Making A walk through Cab in my Mercedes Sprinter RV camper van.
My aim is to give you campervan conversion ideas on how to convert a van into a camper and to help inspire you to build your own tiny home on wheels
please consider subscribing to my channel I really do appreciate your support thank you.
To really help support my channel why no join my member's community and get to see my videos first and without adverts, Don't forget to turn on notifications by clicking the Bell thank you 👍🤓👍
/ @bigvansmallworld
My Amazon Store
Where you will find everything that I have used in my van builds. Plus more great van life essentials.
www.amazon.co.uk/shop/melsvan...
How to convert a van into a camper van
DIY camper van build
how to build a camper van
How to Self Build A Van
How To build off-grid camper van for van life
DIY camper van conversion
DIY camper build
DIY camper van
How to build a tiny home on wheels
Tiny Home share this video with a KZbinr friend:
How to convert a van into a camper van
how to build a camper van
How to Self Build A Van
How To build off-grid camper van for van life
DIY camper van conversion
DIY camper build
DIY camper van
How to build a tiny home on wheels
Tiny Home
#melsvanlife #melsvanworld #vanbuild #diycampervan #vanlife #vandwelling

[@BigVanSmallWorld]

Please give this video a thumbs up let youtube know you you found it useful Oh and don't forget to subscribe 👍😀🤘

[@Lou_Sylw_Bulgarian_Rescue_Dogs]

We also did this based on your experiment. We set off on our van tour of the UK & EU and couldn't bare the double front seat. So I took my grinder and saw to it and the other half sowed the side up and I must say its spot on. For anyone concerned about the MOT. The mechanic said it was spot on. No problem. Saved me like 500£ on a new seat. Ridiculously priced those things 🤣

[@BigVanSmallWorld]

That’s brilliant so glad it worked for you stay safe 👍🤓👍

[@alexrailton2067]

Thanks for the info regarding MOT, that's what I was wondering about while watching.. Just bought a Citroen Relay to convert and ideally wanted a walk through but not enough to spend £500 on a single seat, will be getting the angle grinder out instead.

[@Lou_Sylw_Bulgarian_Rescue_Dogs]

@@alexrailton2067 Yeah exactly. Crazy money. Passed 2 MOT's with no problems. If you aren't the best at sowing. Those seat covers work a treat too! 😅👍

[@alexrailton2067]

@@Lou_Sylw_Bulgarian_Rescue_Dogs Haha never done any sewing before so we'll have to see.. I'll keep the seat cover in mind as "Plan B" lol. Thanks again.

[@michaelw2104]

LOL, Mel your like the David Bellamy of the van world

[@BigVanSmallWorld]

Haha thank you 😂😂🤓👍

[@markwhitehead1658]

Brilliant 👍

[@spitfiretrading]

@@markwhitehead1658 How you going Mate? Niall here :)

[@markwhitehead1658]

@@spitfiretrading all good thanks mate still loving the Convoy ☺ Hope all good with you mate 👍

[@remlatzargonix1329]

That tip about the yellow plug was a good one.....I wouldn't have had a clue. Cheers!

[@BigVanSmallWorld]

You’re welcome thanks for your support 🤓👍

[@TheAndrew363]

Great job Mel , My mate is a MOT inspector and he said MOT Failure the middle seat belt will need to be removed because its a over the shoulder type on a seat without a back . no problem if it's removed.

[@BigVanSmallWorld]

Thank you for that really appreciate you taking the time to help 🤓👍

[@paulmackilligin1754]

Pair of scissors: SNIP! Seat belt gone.

[@strongandco]

I think you filmed a 'cracking' outro when you climbed through into the back without realising it :-) Brilliant video Mel. Too late now but hot melt glue is fantastic for fabric as long as its slightly porous to give it a key. I glue pinch buckles onto webbing straps rather than sewing them and as long as you glue small sections at a time and clamp them in place while its still hot it's immensely strong.

[@BigVanSmallWorld]

Thanks really appreciate your suggestion I did thank about glue but didn’t want to risk it 🤓👍

[@whu58]

@@BigVanSmallWorld Thinking about it, you could have borrowed my canvas `stretcher pliers` (picture framing tool) if I had known.

[@michaelw2104]

Mel as far as MOT goes if its not there they can not fail it, nothing to inspect but the fact you left the middle seat belt there might be an issue . i was surprised while you had the seat apart you didn't take it out

[@BigVanSmallWorld]

That’s a great idea 👍🤓

[@linz_in_NZ]

@@BigVanSmallWorld Does your V5 say 2 or 3 seats? If it doesn't specify either then get rid of the seatbelt and hopefully that will keep them happy 🙂👍🚐

[@bobflyman]

When I suggested to the bloke in the camper workshop who fitted my windows that I'd do this to my Renault Trafic I fitted out he said it wouldn't pass an MoT. Obviously can be done!

[@BigVanSmallWorld]

I’ve had no problem with MOT

[@meeeeeebojo]

Nice job... No problem with mot with mine & its identical😎👍

[@BigVanSmallWorld]

Thank you good to know 🤓👍

[@bluesurfertodd]

wow love that idea, I wonder if that's legal here in Aussie. Love the light hearted humor. cheers mate.

[@BigVanSmallWorld]

Thank you I’m not sure if it’s allowed in Australia but in the uk we can do pretty much anything we want but I’d still rather be in Oz really starting to miss Queensland 👍🤓👍

[@dannyblueprint7078]

Mel : ‘I’m not a big fan of 240v’ Fast forward 3 years and I’ve just watched a video of Mel boiling his kettle on a induction hob and absolutely loving life 😆😆

[@BigVanSmallWorld]

Yeah I’m covered 😂👍

[@angelaviolet]

Brilliant video Mel, you're like the 'David Attenborough' of the Van world.

[@BigVanSmallWorld]

Wow thank you that’s a real complement 👍🤓

[@andrewgilbride7546]

Gwapple me gwape nuts!

[@estherstephens1858]

Mel, I have to admit I was worried about you cutting that seat but it looks AMAZING!!! I’m truly impressed. Job well done!!

[@BigVanSmallWorld]

Thank you 🤓👍

[@PhilPassmore]

Why not mount the 'push button' end of the seat belt onto the other side of the seat that's left (far left side), and do the seat belt up in the other direction. Then you could have the whole lot pivot too without any problems, and the seat belt left behind would actually have a use? Just a thought.

[@wanderingbox7971]

good stuff deffo good to leave the seat part less is more and it enables a good slide through

[@BigVanSmallWorld]

Thank you 😊

[@FreedomStrider]

Love your humour and sense of storytelling Mel - can;t wait to see the van build and your DIY approach - we removed our double seat to fit a double swivel and that yellow cable is a friggin' pain!!

[@BigVanSmallWorld]

Thank you that’s nice of you to say much appreciated yes that yellow plug can be a pain 😬👍🤓

[@fraserhardmetal7143]

Mel - you are gradually changing into Paul Whitehouse - remember the " aren't things great " sketches - funny and informative.

[@BigVanSmallWorld]

Lol I remember that 😂🤓👍

[@NomaddUK]

Brilliant

[@ResilienceQd]

I really liked that! I've been wondering what it would look like if you took half the seat off, and now I know. You're like a proper McGyver, Mel, and it's so much fun to watch your videos. Don't ever stop just being you on camera - you have that certain likeability factor and you're really good at talking people through the steps of each process. As for yellow screws, I'd never even heard of them so that was very good info too. Great stuf! 😊

[@BigVanSmallWorld]

Thank you that’s really nice of you I really do appreciate your encouragement 🤓👍

[@malimoo7279]

Oh I have been wanting to do this since I took the van on a few years ago! Now I know it can be done I just need to get the bottle to get it done. Thank you.

[@BigVanSmallWorld]

You are absolutely welcome 👍

[@glynatmore1817]

It's all going wrong now mel. !! Lol Your such a funny man God bless you sir. Kind regards Glyn

[@BigVanSmallWorld]

Thank you 🙏

[@sarahthedreamcatcher8357]

You sew as well Mel omg what an excellent job it looks really nice and as you said great storage for your electrics you could put your diesel heater in there.Great idea to do that glad to see your making progress xxx

[@BigVanSmallWorld]

Hi ya I wouldn’t say my sewing is all that good els I wouldn’t have holes in my trousers lol good idea about the heater 🤓👍🍻

[@sarahthedreamcatcher8357]

@@BigVanSmallWorld well it looked good through the camera xxx

[@mikegreen7902]

Hi Mel. So happy you didn't cut off the wrong half! Lovely to follow your project.

[@BigVanSmallWorld]

Thank you now that would have been embarrassing lol 😂👍🤓

[@superspace4179]

I’m really enjoying this van build like all your other videos. Thanks Mel.

[@BigVanSmallWorld]

Thank you I appreciate your positive feedback really encouraging 🤓👍

[@linz_in_NZ]

Nice job Mel. I've still got the full box under my 1 & 1/2 seat , part of it is a toolbox with lift up lid between the seats, the rest is under the passenger seat and used to house all the Ambulance electrics. We wondered about putting the leisure battery in there, but it wasn't quite big enough for the battery we ended up with, but will get used for things that might get dirty, so we don't want in the other storage areas - like hook up cable, water fill pipe and levelling ramps etc.

[@BigVanSmallWorld]

Thanks Linz I have to say you gave me the encouragement to go ahead and do it and your rite the bass dose make a great storage box 👍🤓

[@alanmay1945]

Hi Mel, a particularly great video, because of doing this innovative and pioneering job, from your own original thought; no one else including me has had this idea. When you first told us about doing this I thought it was ridiculous, but how wrong I was, because what you've achieved here is a great solution and with not much difficulty either. I think it will be ok for the MOT, because I can't see why it should'nt be. Very well done Me, congratulations! from Alan, in Norwich.

[@BigVanSmallWorld]

Thank you that’s really appreciated makes all the hard work worthwhile 🤓👍

[@carold8308]

Thanks for this vid Mel. I've been thinking of doing this to my double seat but was a bit worried about the structure of the seat. Now you've shown me I'm all set to go once I've sorted my table. V many thanks :) :)

[@BigVanSmallWorld]

You are welcome please be careful 👍🤓

[@carold8308]

@@BigVanSmallWorld Don't worry, i will be :)

[@darren-cottageatelier8962]

Great stuff Mel, I was a little worried about how it would look, but you pulled it off, also thanks for the tip about the yellow plugs, I didn't know that, so I am happy that you strongly emphasised the issues of not disconnecting the battery. I am looking forward to seeing more on this conversion.. Greg Virgo will be looking over his shoulder :-)

[@BigVanSmallWorld]

Thank you and you’re absolutely welcome really appreciate your encouragement and support 🤓👍

[@markwhitehead1658]

Thanks Mel great video. It just shows what can be done if you put your mind to it. Nice one👍

[@BigVanSmallWorld]

Thank you 🤓👍

[@uncledodge9396]

Last Transit I worked on I fitted a pair of Ford Mondeo seats in it out of a crashed motor, cost was £120 for the pair but well worth it, far less hassle than the conversion you've done, I did have to change a few little bits on it but ended up with electrically adjustable and heated!

[@BigVanSmallWorld]

Sounds lush 👍

[@paulshideout9056]

Great job Mel it's something I wanted to do on my t6 but didn't have the balls for love it !!

[@BigVanSmallWorld]

Cheers 🍻 🤓👍

[@sunnydaze6974]

Well, I'm very impressed by the work Mel !! A huge thumbs up for that piece of work. Well done. :)

[@BigVanSmallWorld]

Thank you 🤓👍

[@ROUTEPLANNERPAUL]

Evening Mel,, that's a great idea on the seat ur vans coming on my friend 👍👍👍👍

[@BigVanSmallWorld]

Thank you 😊 😂👍

[@allengraham7016]

brilliant idea never seen that before people will catch on to that like me going to have to look at my t4 seat cheers Mel

[@BigVanSmallWorld]

Thank you and good luck with yours 🤓👍

[@codeblack3026]

VW double seats going to be sliced up now.Good vid.

[@BigVanSmallWorld]

Thank you and good luck with your project 👍🤓👍

[@gosomewherenew]

I know this is an old video but is found it super interesting! Cheers

[@davidgriffiths7696]

Good ideas

[@BigVanSmallWorld]

Thank you ☺️

[@HonkyHorton]

Excellent work Mel and it didn’t cost a penny, my kind of van build.....free 👍

[@BigVanSmallWorld]

Thank you 🤓👍

[@MELODYMUNRO]

Thanks for this, I have been pondering what to do about the seats.

[@BigVanSmallWorld]

You are absolutely welcome good luck with your build 👍😊👍

[@ashy1423]

Hi Mel, I’m Loving the videos and your get it done attitude 👍 Glad to hear it passed it’s MOT. Stay well and hope to see another video soon. Ash from 🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@BigVanSmallWorld]

Thank you I appreciate your support please feel free to share 👍🤓

[@mikewalker9238]

Get a drivers seat from a left hand drive van. One thing you need to do if you are going to use it all year is a bulk head that's at least 1.5" thick and full of insulation. An opening with a curtain during the day and a "PLUG" you can place in at night the same thickness aa the bulk head. The drivers area on s van gets very cold. The vans heater also is a wast of time if your trying to keep the van warm without a bulk head.

[@jrsuk1170]

Great idea Mel. I'm going to borrow this idea .....after I renew my mot 👍

[@BigVanSmallWorld]

Thank you good luck with your mot 🤓👍

[@carold8308]

Thanks Mel so much for this video. I have done similar to my van seats now, only i removed the outer passenger seat. One other difference is that i cut thru the metal with an electric hacksaw - no sparks at all, so I might advise others doing this to use one of these. I would add a pic here but i don't think its possible/I don't know how to. So thanks again for your video. Cheers and Happy New Year. ☺️

[@BigVanSmallWorld]

Hay carol that’s a great idea and probably a lot safer too good luck with your conversation 👍🤓👍

[@carold8308]

Yes well i don't have an angle grinder whereas i do have the electric saw - bought for getting small branches off trees, so it was luck in the form of using what i already had. I wasn't at all sure it would cut thru but it did - easily! Yipee.

[@nickjury5198]

Fantastic👍

[@BigVanSmallWorld]

Thank you 🤓👍

[@des2610]

Hey Mel, I have the same problem in my sprinter....This is a cheap and acceptable solution! I didn't think of this but I would prefer some nice comfy bucket seats but boy are they expensive!!!

[@BigVanSmallWorld]

Thanks for positive feedback I’m so pleased I did this as not only do I now have a way of getting into the living space I also keep the storage space under the seat it’s a win win 👍

[@Pugwash.]

You might want to change the number of seats on the V5 when you next send it, but don't worry too much. My van was registered new with 3 seats when it only had 2! I got that sorted this year. I have more of a crouch and crawl-through on my van.

[@BigVanSmallWorld]

Ooh 😮 I didn’t even think about that well done 👍 thank you 🤓👍

[@garrybeard2031]

Well MEL you did it.it looks great well done mate.👍🇬🇧🤘🍺

[@BigVanSmallWorld]

Thank you 🤓👍

[@Bishbashbosh67]

Nice vid Mel great cheap easy fix for getting into the back,Looks good great work

[@BigVanSmallWorld]

Thank you I’m glad you think so 🤓👍

[@barrysoutthere]

Top work Mel !

[@whu58]

Great job Mel, the stitching looks pretty good mate, for MOT purposes, they might say that its "half a seat" with no back rest or seat belt in place = maybe just get rid of the padded seat base bit so it looks like a storage/housing box and not half a seat?

[@BigVanSmallWorld]

Cheers mate 🤓👍

[@jamiecallumsykes]

Get rid of the belt and I think your be fine as you said you have just moted her so your fine for a year

[@joyardley1742]

I love your presentations ....and now you have told. Us you have two cats 🐈 x😻

[@BigVanSmallWorld]

Thank you 🤓👍

[@donielle1531]

Love it

[@BigVanSmallWorld]

Thank you that’s very kind of you to say

[@frederickharron5217]

Looks surprisingly good, I thought it would've looked worse for some reason...! Another good one Mel...

[@BigVanSmallWorld]

Thank you I was really surprised how well it worked out to and relieved 🤓👍

[@spitNsawdust]

Great to see the van at the beginning 😊👍

[@BigVanSmallWorld]

Thank you buddy

[@susanwoods174]

We did this to our Renault master, your sewing is better than mine!! Well done. Why would anyone want to go outside to come back in again?? Love ur vids. Our plan is to get a swivel chair one day.

[@BigVanSmallWorld]

Well done 👍 pleased to know you managed to do the same but in a different van 🤓👍

[@CheckFred]

That was an EXCELLENT bit of advice about the Yellow Plugs - (Never knew that one :-) And your Sewing?? ............ 'Blanket-Stitch' every time ;-)

[@BigVanSmallWorld]

You are welcome thanks for watching 🤓👍

[@catvando3209]

Nice one Mel. One bit of advice about the grinder is don't over tighten it with the spanner otherwise you have difficulty getting it off again later. Look forward to the next video. Best wishes.

[@BigVanSmallWorld]

Thanks that’s sound advice 🤓👍

[@stevehughes6533]

I'm impressed with that. I thought you'd use a large hand saw and just put up with bits of foam hanging out

[@BigVanSmallWorld]

Thank you 🤓👍

[@woolleycodwanderers4833]

Good job 👍 it's better to be able to get into the back from the front , I climb through our escape hatch more than I ever expected I would 😁 ... ❤️👵🏼🐾🐾🤠

[@BigVanSmallWorld]

That’s funny I had the same experience with my transit that’s why I was determined to make this one a walkthrough 🤓👍

[@woolleycodwanderers4833]

Mel’s Van World 😉👍

[@bstfabricsltd687]

I enjoy watching your videos

[@pa_maj.MARTINI-van-MAN]

That yellow plug is useful to know about mate 👍 cracking job on the vid, pun intended lol 🤣

[@BigVanSmallWorld]

Thanks 🤓👍😂

[@bonza6128]

Brilliant what a great idea Mel and very entertaining

[@BigVanSmallWorld]

Thank you 👍🤓👍

[@nightwalker5278]

All things considered and that is one difficult project. You did a cracking job there. Great upload :)

[@BigVanSmallWorld]

Thank you 🤓👍

[@NomaddUK]

Teehee cracking 😂

[@SooperSkoots]

Mel that is a cracking idea mate i have the VW Crafter so guess what i'm doing soon, great videos keep it up......

[@BigVanSmallWorld]

Thank you and good luck just be careful 🤓👍

[@tambrath]

Well done Mel looks the part and useable for now . Will be back for more cracks I hope not lol

[@BigVanSmallWorld]

Cheers 🍻 👍🤓

[@christophermason1574]

Mel, looks mint, as regards to the mot, if there is no belt, it should not be classed as a seat, if you remove the seatbelt you will put the airbag light on, however I will email you the solution to turn this off for pence.

[@BigVanSmallWorld]

Cheers 🍻 🤓👍

[@travelingchalksworld5138]

Cracking idea, MOT shouldn’t be a problem. As it hasn’t a back so it’s not or in any way be construed as a travelling seat. Also if you are going to put your electrics in there you don’t want to be having to move them if you install a single seat 🚐☕️☕️👍🏴󠁧󠁢󠁥󠁮󠁧󠁿

[@BigVanSmallWorld]

Cheers mate if I do get a single seat I’ll still keep the bass 🤓👍

[@travelingchalksworld5138]

Mel’s Van World how you going to do that? Thinking about it all you will have to do is make a cover for the middle bit. But you won’t gain anything, you will still have to step over the base. Anyway good luck with your conversion🚐☕️☕️👍🏴󠁧󠁢󠁥󠁮󠁧󠁿

[@Dronerangerspro]

Great idea 💡 I think I may do that in my Promaster!

[@BigVanSmallWorld]

Thank you please be careful and good luck 🤓👍

[@jonnymac1505]

Plenty of cheap 12v TV's out there Mel, another fun video btw, thanks.

[@BigVanSmallWorld]

Thank you really appreciate your support 😂👍

[@darrenmeears4667]

Great job as regards the MoT take the seat out they carnt fail something that's not there 😆😅😂👀👍👌

[@BigVanSmallWorld]

Thank you that’s a brilliant idea 🤓👍

[@rucebaybruce6174]

It turned out really nice Mel!

[@BigVanSmallWorld]

Cheers 🍻 🤓👍

[@rph31015]

Looks so good 👍

[@BigVanSmallWorld]

Thank you 🤓👍

[@LukesVanLife]

Hi Mel, good job matey. Would never attempt to cut a twin seat down but you've managed to do it very well, it should do you very well till u find a single seat. :)

[@BigVanSmallWorld]

Cheers Luke I may just keep it for the novelty 😂🤓👍

[@oldskoowlpebblestravels]

Well done Mel makes life easier not having to get out and walk around

[@BigVanSmallWorld]

Gd Day mate where ya been omg so good hearing from you 🥳

[@oldskoowlpebblestravels]

@@BigVanSmallWorld Had some time away from the Tube had quite a bit around the house to sort out all done now

[@BigVanSmallWorld]

Brilliant 👍

[@michaelsintown9008]

Congratulations Mel you’ve been and done it ,that was very brave of you ,Was that you that put the dent in Greg Virgo’s van with your articulated lorry ??? All the best Mike...

[@BigVanSmallWorld]

Thank you and no wasn’t me I’m gutted for Greg glad he got away on time 🤓👍

[@E3CB]

Greetings from Italy! Wow, your subscribers nr have exploaded!! Awesome job!l :)

[@BigVanSmallWorld]

Thank you really appreciated 🤓👍

[@chrisneville7310]

Nice one Mel👍 cutting my seat out today. Hoping it goes as easy as yours

[@BigVanSmallWorld]

Good luck just take your time and disconnect your battery before the yellow wire 👍🤓👍

[@chrisneville7310]

@@BigVanSmallWorld Thanks Mel, will do👍

[@wkdnico]

Class as ever. Well done like it.

[@BigVanSmallWorld]

Thank you 👍🤓

[@bangonfishingadventures]

very simaler to my idea, Ive got a dual cab back seat one pcs 3 seat. Would like to make a 1 back seat only

[@BigVanSmallWorld]

Good luck 😉

[@cameronheads5188]

Considering this on my newly purchased Transit to allow for a walkthrough, one question is how was the process of changing it with the insurance etc ? Any hassle ?

[@David_11111]

Yellow plug information is great.

[@BigVanSmallWorld]

Thank you I almost didn’t mention it I’m glad I did now 👍🤓

[@davidellerby732]

Awsome Job mel, Great work :-)

[@BigVanSmallWorld]

Thank you 🤓👍

[@dieselbushcraft1299]

Mel I so love your presentation style, you’re a good laugh but in a nice way 👍. If the middle seatbelt is still there would that be the mot problem so without the seatbelt would that be a pass?

[@BigVanSmallWorld]

Thank you I’m not sure about the mot issues 🤓👍

[@urbanarkoverland]

Yeah diesel is Bob on. I put a double front in the rear of a t5. Had a seatbelt buckle but no belt. Vw had me cut it off. Two seats but because it had no belt or clasp it passed. 👍

[@donaldmarks8707]

Nice idea Mel well executed. :-)

[@BigVanSmallWorld]

Cheers 🍻 🤓👍

[@TheKinlock]

Very tidy job, always do a great job

[@BigVanSmallWorld]

Thank you 🤓👍

[@vincentsgardens870]

Mell wicked vid bangin idea that good finnish too ,need more videos sooner and whats happening wi engine ? side of things come on next video !!!!!!

[@BigVanSmallWorld]

John McGinnis cheers mate feel free to share it on Facebook ext really appreciate your positive feedback and support as for the engine light it’s still coming on now and then possibly EGR !!! I’m not working on the engine anymore as I need to concentrate on camper conversation and get it done asp 🤓👍

[@davidm9643]

Tip. cover material on seat when grinding/cutting sparks can easily melt into material

[@BigVanSmallWorld]

Good tip thanks 🤓👍

[@richardhollyoake2652]

Looking good mate keep up the good work

[@BigVanSmallWorld]

Thank you 🤓👍

[@toppertruthio]

looks good mate.Great idea

[@BigVanSmallWorld]

Thank you 🤓👍

[@UrbanVanlife]

dude thats a job well done , great job sir

[@BigVanSmallWorld]

Thank you 🤓👍

[@gromett]

I am a bit of a lazy bugger, I would have used heavy duty staples and bought some decent quality seat covers. Lovely job though.

[@briancollis9352]

Hi Mel, another great video and your skills / ingenuity have no bounds. You mentioned in passing that you now have an mot on the van, were there any issues? Lastly I am interested to know the external and external length of your van. Cheers. Brian

[@ad-van-ture]

interesting experiment, had often thought if it were possible and now I know, cheers🤘ATB Shane

[@BigVanSmallWorld]

Thank you glad you like it feel free to share on Facebook and any other media really appreciate your support 👍🤓

[@CoherentChimp]

Will you have to get the V5 changed to 2 seats instead of 3 Mel? You might have to send the DVLA photos of the new set up as well.

[@BigVanSmallWorld]

I really didn’t think about that thank you 🤓👍

[@NomaddUK]

That is probably how I will do my trafic too. Have you any thoughts on what you will do with the crack at 11:18? Maybe a curtain over it lol.

[@BigVanSmallWorld]

Hahah 😂😂sorry about that I have been on a diet it’s working 😂🤓👍

[@Andy-xq7dx]

Great video. Have just started to follow you. Do you know what it will take to get it through the mot now it has two seats. Many thanks mate.

[@BigVanSmallWorld]

Thank you and yes it’s past MOT no worries just had to tell the DVLA it’s a two seater that’s all

[@L4WNY..]

Have you done a video on how to replace a broken armrest?! 🙏😝

[@vanmccool9962]

First thought was nooo dont do it, but you made a good job of it fella.

[@BigVanSmallWorld]

Thank you glad you think so 🤓👍

[@pshearduk]

What a great KZbin’er 😎 awesome a new subscriber here 👍 atb

[@BigVanSmallWorld]

Thank you really appreciate your encouragement and support 👍🤓

[@TEK_UK]

Do you have an idea of how I can fit a seat cover over this? Would a single cover stretch over? Or would I have to cut down a double? Thanks for the video, done this in my sprinter luton and love it, need a nice cover now.

[@BigVanSmallWorld]

You would need to cut down a double 👍🤞👍

[@TEK_UK]

@@BigVanSmallWorld Thanks for the reply, keep up the good work :)

[@paulbain9262]

The David bellam of the van world 👍

[@BigVanSmallWorld]

That’s so funny thank you made all the work worthwhile 😂🤓👍

[@NomaddUK]

Well gwapple me gwapenuts