How to AI Animate. AnimateDiff in ComfyUI Tutorial.

[@cosmiccarp5030]

Sweet, I literally just sat down to learn comfy and animatediff. Your timing is impeccable sir! Comfy UI is worth it everyone! I'm really liking it. Especially the screen shot workflows!

[@sebastiankamph]

It really is very convenient. For workflows like these, you don't even have to learn Comfy! 😊

[@cosmiccarp5030]

Yes, but with relaxing tutorials like yours, it is a pleasure to learn comfy! Cheers!@@sebastiankamph

[@Brenryz]

@@sebastiankamph but you said you would cover txt2video with local later in video and sections dont show that. im not watching a feature length movie just to skip over solutions for people who dont even own a computer ! you dont cover the process of setting up locally for txt2video nodes

[@SebAnt]

Thanks! I had no desire to try animations but got sucked into the rabbit hole and tried all 3 examples you taught. Your teaching is crystal clear 🙏🏼 I did stumble into some error messages that my path was too long, and I had to modify the registry to enable long pathnames. Last week I learned how to use Reactor to do face swap in A1111. If it’s possible to use that within ComfyUI for videos too, it would be awesome if you could do a tutorial on that .

[@sebastiankamph]

I'm happy you keep enjoying the videos, Sebastian! And I very much appreciate your support, it is a great help towards me creating these videos. There are face swappers for video, yes. I will for sure get a tutorial done on one of them soon. That's a great idea 😊🌟

[@SebAnt]

@@sebastiankamph I just saw a video where someone did face swap in SD using Reactor. Can this be done in ComfyUI? kzbin.info/www/bejne/bJW8kGSKm9-Nitksi=XusTReirIFc0nE8u

[@KINGLIFERISM]

Seond on that@@sebastiankamph But consider this idea (I am not good at comfyUi but have a grasp on a concept that I am not able to do myself) I was wonder since roop has a graphic limitation due to the model it uses why not do ip-adaptor + face in the workflow then face merge/blend into roop this way you get a higher resolution face and then that image goes into the video generation process.... let me know what you think.

[@myghail]

Idk how many times I heard u say "I prefer 2m karras" in the last couple of days. :D Not that I'm complaining! Thanks for the videos, they are incredible - first time I'm actually getting all this and I've tried many times.

[@sebastiankamph]

People want to know what I use :D Some just want the answers and not the whys or hows. Glad you're enjoying the content

[@myghail]

@@sebastiankamph I understand completely + in all honesty I woulda forgotten by now which ain't good considering 2m karras does work the best definitely

[@joonienyc]

bro , the best way to experiment with ur basic txt2vid and vid2vid ! thank u

[@sebastiankamph]

Glad you liked it!

[@KINGLIFERISM]

What you did that many do not... was you made errors and corrected them. That is a sign of a person that understands user experience. That is also a person of empathy. You sir... are a nice person.

[@sebastiankamph]

That's very kind of you, thank you very much! You're the real mvp 😊💫

[@choboruin]

First guide that actually let me generate something. Wasted 8 hours today using this and I just got a video after another 30 minutes and its just a puddle LOL. Appreciate the tutorial though! Great content.

[@Moonequin]

I'm glad you had some luck.

[@defy_norms]

My gosh, dude you got a subscriber!! You are amazing, keep it up. This helps small KZbin channels like us immensely

[@sebastiankamph]

Thanks for the sub! Happy to help :)

[@ElHongoVerde]

Friday and new video from Seb. Nothing could go wrong today!

[@sebastiankamph]

And it's even an extra long one to celebrate friday! 😊🌟

[@chipko]

This is fantastic.. well produced, well explained and so informative. Thank you.

[@sebastiankamph]

Glad you enjoyed it!

[@alpineuniverse]

Great tutorial! Thank you for doing this. Quick correction: I think you mean "convergent" instead of "divergent". We want our sampler to converge on an image, not diverge from it. Cheers!

[@sebastiankamph]

You're absolutely right, thank you!

[@clovernacknime6984]

7:00 I think you mean convergence. Divergence means that a sampler (function) never settles down to (approaches) a particular image (or other output), while convergence means it will.

[@sebastiankamph]

Right! I wonder what made my brain mix that up 😅

[@alpineuniverse]

Just commented the same thing and realized someone must have caught it too :)

[@IAmTheAntiArt]

My first T2V SDXL AnimateDiff with HotShotXL vid is rendering right now! This vid got me started with animate diff in comfy 6 days ago. Thanks!

[@Cu-gp4fy]

Dude your examples are 🔥🔥🔥

[@sebastiankamph]

Boom, thank you! 😊🌟

[@PushedToInsanity]

Great tutorial as usual. Appreciate all the examples you've give, by far my favorite KZbinr when it comes to AI art. Do you offer personalized lessons?

[@sebastiankamph]

Thank you, how very kind! Yes, I do. You can write to me in Discord. See link in channel or video description. 🥰

[@KDawg5000]

Very nice tutorial! Just a heads up to those who want to use SDXL models; you can use them, but you have to use the Hot Shot motion module, and set the resolution smaller.

[@kiksu1]

SDXL beta model for AnimateDiff was also released just today morning 👍🏻

[@KDawg5000]

@@kiksu1 Wow, nice. I'll have to check it out now. EDIT: I just tried it out in A1111, but not good results. Every frame is a completely separate image, unrelated to the previous frame. Hmmm. Well at least it tried instead of just crashing.

[@kiksu1]

@@KDawg5000 Oh yeah, sadly it doesn't do great yet. Tested that too but I'm not convinced yet. Hotshot worked much better.

[@sharpenednoodles]

Finally, an animation tutorial from the king

[@Mowgi]

Mate, you have great timing. I've just recently installed ComfyUI and started getting into animatediff, but I really haven't understood consistent animations, just the morphin stuff so far.

[@sebastiankamph]

Great to hear! Hope the video helped you, let me know how it goes 😊🌟

[@dustinjohnsenmedia1889]

Great video! Now I just figure out how to tack on an upscaler at the end

[@JarppaGuru]

upscale and save. i would not waste power without see result first LOL. there is no control how it will look its gods hands LOL i mean it do exact how its trained. your source and prompt is just match LOL LOL

[@stonewhite7777]

you're an awesome dude! congratulations 🎉👏

[@philippeheritier9364]

best tutorial, best result, you are the boss !

[@sebastiankamph]

Wow, thanks!

[@Shingo_707]

That thing about divergency with samplers was interesting, it would be nice to have a video reviewing all of them

[@EmilyNilsen]

I think I'm hooked on your pappa jokes.

[@sebastiankamph]

Lovely, aren't they? Everyone needs more dad jokes in their lives 😊💫

[@hleet]

It's very well explained ! Thank you

[@sebastiankamph]

Glad it was helpful! ☺️

[@vaderragex90]

Very nice tutorials, these are so great! Ich liebe es!

[@Enchanted.Explorations]

Thank you so much! Very cool stuff! (Y)

[@digidope]

Context window: That is the fps that the model is trained for and you should NOT change it with animateDiff. If you use other model than AnimateDiff like HotShot then HS is trained with 12fps and then you need to change that value.

[@EarthWalkerOne]

Not fps, but the number of frames that animatediff chunks together for temporal consistency. It is motion model dependent though, so increasing the value higher than what the motion model was trained for will give you worse results.

[@Inner-Reflections-AI]

Nice! Thanks for highlighting my workflows! I have learnt a lot from your videos!

[@sebastiankamph]

I'm happy to hear that! Comfy is probably where I've played the least so far, but for some tasks it feels like a necessity :) Keep up the good work. Maybe an img2video workflow next?

[@core-f]

Correct me if I am wrong, but I think the frames you use for prompt traveling are not the starting frames for the given prompt, except frame "0". It's the frame where the new prompt is completed. That's why you have a rather long winter in the default example, because it transitions from frame 50 to 75 into winter and then has an extra 25 frames for the winter prompt. For an even distribution you'd need the frames 0, 33, 66 and 100.

[@dejuak]

Hey really nice video i have watched it like 10 times on the last month. I have a question, is there a way to only animate the character but keeping the background static? Would be really awesome

[@Kontaktfilms]

Sebastian, I'm a fan of your work and tutorials - I followed along for the Video2Video workflow, all my nodes and models are there, I see my original frames and lineart renders in preview... then when I render the Queue the image under Video Combine is just black. I had the same problem with another workflow. Any idea what could be causing this? I'm on a Apple M1 Ultra. Thank you.

[@ShoreAllan]

Hello Sebastian, many greetings from Berlin and thank you for your work! What do I have to do to extend your workflow with a face swap from a photo - i.e. video-and-picture-to-video!

[@francsharma7276]

great video i done at 3070ti 8gb laptop, 480p resolution, hope i can resize it, love u bro

[@felipealmeida5880]

It's cool, but the animations are not consistent, they are short and if you don't have a very good PC, it takes a long time to generate just a few seconds

[@skybeast2738]

True, although with controlnet animations can be quite consistent

[@dhanang]

AI is still at very initial stage. Considering what these programs can do like 1 year ago, this is a leap.

[@ThatGuyNamedBender]

I guarantee it takes less than it takes to render a 2 second clip in blender. Man script kiddies are too damn bitchy nowadays. Like bro you're already generating art with text, not time or skill deal with the limitations 🤣🤣🤣

[@Tedrer]

Hi. There is some changes, animatediff combine is deprecated. it is the same to use video combine node?

[@CrudelyMade]

do you have a document or video which summarizes the differences between the sampler like euler, karra, etc.. you mentioned some of the differences between the models in this video, and it was a great explanation. would love to see a 'breakdown' of the rest. :-)

[@sebastiankamph]

Yes, check my beginner's guides on Stable diffusion where I show a1111. I go through samplers there.

[@gorge.p96]

Hey Sebastian. Nice video. Have you planned to make an AnimateDiff video for A1111?

[@choboruin]

It took me 40 minutes with 3080 ryzen 5900 to generate a puddle of mud. What kind of PC are u using? seems ur rendering fast LOL..

[@Moonequin]

I'm glad I'm not the only one who feels like they wasted their time. Followed everything to a T and I'm STILL missing the input box. Going through ALL THIS BS for a 5 sec looping video? Uh no thanks. I've watched way too many videos on this topic. Comfy-my arse. I don't see a point in asking questions. I'll get no answers! Anyway, good luck to you.

[@ronnykhalil]

as always, love yo videos! thanks so much

[@sebastiankamph]

You are so welcome! Glad to have had you aboard for such a long time Ronny! 😊🌟

[@rebelgonebad]

Great tutorial, subbed!

[@PlayerGamesOtaku]

Hi, why didn't you show many nodes how to install them? I can't find: number of frames and many other nodes, I don't keep them and I can't find them

[@sebastiankamph]

Use the manager, see comfy install guide

[@sebook4421]

Hey, I have tried using this and it takes nearly 2 hours on my PC for a 7 second video with 24fps where i only take every second frame. I have a ryzen 5600x and a 3060ti, 32gb ram. Im not sure if i have some completely wrong setting as this seems to take forever compared to your timings.

[@themedleb]

24FPS x 7 seconds means that you generated 168 frames (images), and each image will take ~1.4 minutes to generate considering it took you 2 hours to finish (depending on the resolution and the model you're using), it seems reasonable, because for me sometimes images takes more than a minute to generate with highest resolution and a heavy model.

[@masoud.art.videos]

Great guide, thank you! first timer using comfyUI here, and one thing is strange to me is processing 10 frames for me takes 40 seconds but 100 frames almost an hour! I have a decent gpu(64gb), which makes me think something is not correctly set up. Any ideas?

[@weijiayao9118]

I like your online version demo, but can I use local checkpoint models, it seems there are only limited selections.

[@Caret-ws1wo]

Any plans to make a video like this for a1111?

[@MrRomanrin]

ok WHERE ARE THE WORKFLOWS PICTURES ?

[@generated.moment]

Am i the only one who does understand anything in this, but want to so bad!! where do we start, there's is lots of videos but we need a foundation, why there's no step by step guides?

[@EternalAI-v9b]

What about Image to video? You mentioned vid2vid and txt2vid

[@zzx2879]

hi i have a question, when i apply the control net, i get an error message as followed, would you recommend a fix? Thanks Expected all tensors to be on the same device, but found at least two devices, cpu and cuda:0! (when checking argument for argument mat1 in method wrapper_CUDA_addmm)

[@zzx2879]

im applying the same control net as you, just using a different checkpoint (photon v1)

[@A_G420]

I may give Think Diffusion a shot. Running a 6800 on Arch Linux for the basic txt2vid on your tutorial took 22 minutes to generate. No controlnet for Comfy on Think Diffusion kind of sucks

[@sebastiankamph]

Works well for me. What are you missing?

[@A_G420]

From looking at the site it appears that way. I'll do a free trial today & mess around with it. Thanks@@sebastiankamph

[@kaze5417]

How can I keep the background and everything else the same in my video? The background is animating too, but I only want the human to move.

[@diklashain]

Hey, I keep on getting the same error message: "Error occurred when executing KSampler: module 'comfy.sample' has no attribute 'prepare_mask'" It happens with all the workflows, and I can't find solutions in google... Could you please help me?

[@LaloHao]

What GPU were you using in local generation?

[@nicocro00]

very nice! what's your setup for the local install? What machine / GPUs are you using?

[@sebastiankamph]

Rtx 4090 currently. Previously RTX 3080.

[@임혜린-d7q]

what should I do if there's a message that some node types were not found

[@sebastiankamph]

Did you go into the manager and try installing missing custom nodes?

[@triangulummapping4516]

Im trying video2video, the background of the result is completely static, just the character is moving fine, is there a way to also give some movement and evolution to the background?

[@RenoRivsan]

Where do I add controlnet?

[@journeysinthedeep]

Awesome tutorial bro!! Only issue im running into is my video combine vhs output format is only allowing me to select from webp or gif. I cant choose h.264. Any ideas my guy??

[@hesamarmaghani791]

thanks man This was very helpful

[@mr-s23]

Can I change the setting to more than 4 seconds?

[@gamesofduster9817]

great video...however is is a shame you don't explain all the boxes and the line connection

[@SLAMINGKICKS]

what does this mean ? Motion module 'mm_sd_v15_v2.ckpt' is intended for SD1.5 models, but the provided model is type SDXL.

[@sebastiankamph]

There are two types of models (well more, but simplified). 1.5 and SDXL. Most stuff works best with 1.5 models. So you need to swap your SDXL model into an 1.5 one (the main model you have selected).

[@Eightysixstudios]

getting this error message when trying to follow: Error occurred when executing KSampler: Expected all tensors to be on the same device, but found at least two devices, cpu and cuda:0! (when checking argument for argument mat1 in method wrapper_CUDA_addmm)

[@dougiejones628]

Very cool, is there a way to use an image as a reference instead of a prompt? I have a CG animated image sequence for the input video. And I've enhanced one frame from that sequence and would love to apply the style of that frame to the entire video. Is that possible? Thanks!

[@sebastiankamph]

IPadapter or pix2pix

[@DarkPhantomchannel]

tried the workflow but i keep getting random images instead of consistent frames 😵 can anyone please help? the images are really random, like the're normal bunch of txt2img generations. the animatediff model's name appear in the node, so i think comfy can read it, but somehow it seems not acqtually executing it

[@user-pc7ef5sb6x]

I noticed a difference in quality between Auto1111 and Comfy Animatediff. Animations are less jittery in Auto1111. Not sure if it's something in the way Auto1111 processes the images.

[@sebastiankamph]

Interesting! I haven't done a comparison between the two. Let me know if you find out more about that.

[@art3112]

@@sebastiankamph I would be interested in a quality comparison between Comfy and A111 too.

[@Jdeadevil]

Why am i seemingly the only one wondering why you completely skipped over all the checkpoint/vae files you need and where to get them? This is why I hate AI tutorials, all the "wow bro this is the best tutorial ever" comments make me feel like I'm being gaslighted. What? How? I'm barely a minute and a half in and I'm already getting errors. No I can't 'just load the workflow and then start'. And now I'm getting 'Given groups=1, weight of size [512, 16, 3, 3], expected input[11, 4, 64, 64] to have 16 channels, but got 4 channels instead'

[@kietzi]

wanted to try the v2v in thinkdiffusion, but i have just errors there and dont know how to load uploaded img-seqences.. so i stay at rendering over night, to see some results at my own machine :P

[@samsilva7209]

when animatediff is completely black, what happened wrong? I'm on a m1 max 64

[@LianParma]

I've tried to run this and it just won't work. Even tried a new install of ComfyUI from scratch and even more errors pop up when it gets to the KSampler. Is it broken for someone else or it's just for me? :D

[@Clupea101]

Great stuff, easy learniing

[@sebastiankamph]

Glad you think so! 😊

[@erdbeerbus]

excellent, thank you. where can I get your basic vid2vid workflow, please ... which patreon mode is (if) needed? thx in advance :)

[@dragongaiden1992]

Friend, it is functional, but my result is nothing like my input video, it is completely different, it should be said that I am using checkpoint xl and model xl from animatediff, at night I hope to continue testing, thanks for the video, it takes me about 15 or 20 min to render 50 frames locally

[@mikerotchburns1622]

the lineart preprocessor is bugged or something, its getting hung up on that. updating the nodes does nothing. its not shown as a missing node. changing to open pose does nothing

[@Suketh]

try to "Enable win32 long paths" to 1 in your Registry Editor

[@FaisalAslam-e8q]

Hi, my ComfyUI has MPS backend out of memory when generating images. Any help?

[@havelicricket]

(pls help me) Error occurred when executing KSampler: 'NoneType' object has no attribute 'shape'

[@YazzCasillas]

Very nice tutorial, thanks! Is it already possible to start from an image?

[@bdwedgeofanimotion4106]

that was nice and need to absorb

[@tambe2182]

[Errno 2] No such file or directory getting this error, what to do ?

[@sohelnadaf3887]

It's work on CPU with i5 8250 and 20gb ram?

[@raizer8358]

can i still use the txt2vid workflows with 6 Gb of VRAM? will it crash or only run slower?

[@sebastiankamph]

Might break due to out of memory, but test it and see.

[@uncleben2019]

Where do I get woman.mp4 (or women in general?)

[@salmanmahmoodqazi1523]

Can I run this on 6 gb vram of nvidia 1060 gtx ? mine vid2vid gets stuck at ksampler for ages.... any solution ?

[@Kikoking-y9b]

If you know any solution tell me. I also have 1060

[@dkontey6421]

where is this video to video workflow?

[@vorpalspear5388]

Why do you have a Manager button on your ComfyUI, but I do not?

[@sebastiankamph]

You probably haven't installed the manager. If you've followed my How to install and use Comfy video, you will have the manager.

[@leegregory5617]

Can you do this starting with a still image, rather than a video?

[@EonsAway]

Hiya, How do you get the preview image in the KSampler?

[@sebastiankamph]

If you click manager and check top left, there's a preview dropdown there.

[@ElevateMeEM]

will this work on imac?

[@khanhtrong7761]

Between ComfyUI and SD1111 WebUI, which one gives better result?

[@sebastiankamph]

For animatediff, I find that there are more options with comfyui

[@ShawnTWhitney]

Great tutorial but I'm having an install problem with the ComfyUI Manager in Google Colab b/c there's a conflict between two component versions. Can anyone provide some insight into how to fix this?: "Detected that PyTorch and torchvision were compiled with different CUDA major versions. PyTorch has CUDA Version=12.1 and torchvision has CUDA Version=11.8. Please reinstall the torchvision that matches your PyTorch install."

[@ufukzayim6689]

Do you have same or similar tutorial also for A1111 please

[@AshChoudhary]

How can we add Lora in this?

[@Full_Zeb]

My comfy wont let me install any nodes

[@MatichekYoutube]

and for the final - we can do LCM insane speeds and AnimateDiff? Letsgooo?

[@sebastiankamph]

Yasss! 😁

[@MatichekYoutube]

@@sebastiankamph i can not imagine you would be able to do like 5min video in 10 min rendering time :)

[@MrRomanrin]

i am searching for a Img2Img + ANIMATION work flow

[@brandonlane]

Thank you! 😊

[@MikeJordanSanPascual]

anyone knows why my mac m1(sonoma) generates black images when using animatediff through comfyui?

[@marcus_ohreallyus]

Thanks for all of your great vids. Can you help with a technical problem that happens when I use AnimateDiff in A1111? I always run out of memory with a CUDA error halfway through every AnimateDiff generation, but I have a 4090 with 24GB vram. I've tried almost every bat file argument suggested on reddit, but the error still happens.

[@sebastiankamph]

Hey, glad you're liking the videos! What settings are you using? Mainly number of frames and resolution. Are you using xformers or sdp?

[@marcus_ohreallyus]

@@sebastiankamph I have xformers on. Just the default frames, I think its 16. And I don't do any upscale...resolution is 512 by 768. I don't think it truly is a memory error, because I know that people with much lower ram do this with no problems. When I look at VRAM usage on my GPU monitor, there's plenty of RAM during the generation. I thought maybe there was a setting you know about to make the error stop.

[@sebastiankamph]

@@marcus_ohreallyus that's weird. I would try it in Comfy and see if you get similar results there.

[@icchansan]

Looks amazing tuto but I'm getting mass errors with missing nodes, seems likes it manager get it from the repo but still getting errors with vhs videocombine

[@sebastiankamph]

All nodes in those workflows should be able to be installed with the manager. Let me know if they won't. If vhs videocombine gives you errors, try the regular videocombine. Just double click and type combine to see the ones you have available.

[@stereotyp9991]

servus! wo kommst du her?

[@juschu85]

7:09 I think converge is the word you're looking for.