The overkill command and oops command is the best hack i discovered from you... legendary ultimate time saver... keep it up kuya!!
@LlyanAustria5 жыл бұрын
I'm glad i could help!!:)
@parthepanr27145 жыл бұрын
Really it helped me
@lesteralmario35755 жыл бұрын
Mine is overkill and scroll wheel click hahaha
@czarinaiguico65515 жыл бұрын
What's the difference between J (join) command and overkill?
@roginoapacible15 жыл бұрын
@@czarinaiguico6551 it is a faster way of cleaning up duplicate and overlapping lines.. most of the time if working fast you dont care if lines are overlapping or duplicating and in the end of the day you gonna go back and clean it up.. but with overkill i just go select and area i want to clean up and overkill bam bam..
@darwintan67564 жыл бұрын
May I add some? 😊 Tlen: gives total length of lines (i usually use this in estimating) Ctrl Shift V: paste objects as a bloc Layiso: isolate a layer to avoid selecting unwanted objects ma: to copy or apply properties of an object to another object
@ringsingsheik90142 ай бұрын
Huwag mo na siyang bigyan ng idea. Di naman marunong yan.
@sigdetcdr5 жыл бұрын
Great balance of humor and education. Thank you! I use the -PAN command in a viewport all the time. In MODEL space I will have objects a set distance apart (foundation, floor plan, roof, etc) and then in PAPERSPACE in a viewport, I can use -PAN to move the model the same set distance so that all the objects appear in the same location from sheet to sheet and the scale remains the same. (Lock those viewports, people)
@LlyanAustria5 жыл бұрын
Thank you for these additional commands pal!! They help a lot!:)
@titoJClips3 жыл бұрын
00:27 1. tr + double space = unli trim / extend 02:39 2. ctrl shift c = special copy 04:57 3. select tool 07:17 4. lasso select tool 08:49 5. "saveall" Save all / "closeall" close all command 09:48 6. overkill command 11:27 7. oops command 13:30 8. scrool wheel click - instant pan command (hold and drag) / zoom to extents (double click) Late, but you're welcome. XD
@kenesufernandez12812 жыл бұрын
Thank you
@kenesufernandez12812 жыл бұрын
♥️
@DerTodesbote1 Жыл бұрын
thx man
@JinzExpatLife5 жыл бұрын
for the copy commands. add the control+shift+C 0,0,0. / control+V 0,0,0. this is very useful for transferring your layouts into another model space without altering your origin and position.
@LlyanAustria5 жыл бұрын
Thank you for the additional tips pal!!:) they help a lot!
@i.gkriesha23652 жыл бұрын
Grabe laking tulong nito.. Sanaall Love LOTS. 🥰
@ringsingsheik90142 ай бұрын
huwag nyo turuan yan. Di ba architect daw sya. Dapat alam nya yan. Bobo nya naman
@Ayushporwal0075 жыл бұрын
Select multiple line and press J + enter to convert the whole in polyline To join line perpendicular to each other use fillet command or press F + enter and than R + enter then set radius to 0... Boom! The lines will be joined at right angle without the need of any stretch or trim needed
@LlyanAustria5 жыл бұрын
Thank you for sharing these shortcuts pal!!:) It's very helpful!
@ho70265 жыл бұрын
you can bypass setting the radius. holding shift while filleting (or chamfering) will set the radius/ch distance to 0 and create a corner.
@levelrod5 жыл бұрын
Thank you! I’ve used autocad for 20 years and am ashamed to admit that I never knew I could extend while in the trim command by double space bar, nor did I know about tips 6 and 7! Thanks for not taking for granted that “everyone” knows this. I sure didn’t and have spent many years in offices full of engineers with all of us sharing tips with each other and no one ever mentioned “oops” nor “overkill”. Oh the hours I could’ve saved! Especially the overkill command!!! Thank you and looking forward to more! God bless!
@LlyanAustria5 жыл бұрын
I'm glad i could share these things pal!!:) Thank you for the encouragement!
@ho70265 жыл бұрын
need to be careful with overkill though, it can sometimes give you anomalies when polyline arcs are present , say circles made of 2 polyline arcs (i know, retarded but i genuinely received drawings like this multiple times) will actually become semicircles, some poly-arcs will change shape etc ...extremely useful but need to remain vigilant.
@amv27723 жыл бұрын
I just scrolled through all of the comments, thanks for the helpful video and for everyone who posted new commands to add.
@Skybagel15 жыл бұрын
came here for extra knowledge on AutoCad. Subscribed cause i love his personality and jokes. great job bro!
@LlyanAustria5 жыл бұрын
Thank you for the support pal!!:)
@themonyodeville14865 жыл бұрын
trim and extend commands are interchangeable in function with the SHIFT button. thanks for the vid... this refreshed me with some of the commands and I learned the "overkill" command 😁
@LlyanAustria5 жыл бұрын
Glad you learned something pal!:)
@jasonmehringer49885 жыл бұрын
All good tips/tricks. Try align for scaling objects; ma match property; array command for repeated objects like stairs, hand rails or joists; divide; offset for wall thickness; right click "select similar"; poly edit multiple - select group of lines and convert to poly line then join them all; wipeout to make an invisible box to hide cut objects; and layer manager so you can stack your drawings and quickly change views to the layers you want on or off; the ultimate "laydel" will allow you to delete those impossible to get rid of layers be careful all objects on deleted layers will be erased; layoff to repeat selecting objects to turn off their layer; for polyline hover over node to add vertacy or remove vertacy, or convert line to arch. Play with those for a while. Then start to learn dynamic blocks. Please don't ever use line command, use poly line. Selecting will much easier
@LlyanAustria5 жыл бұрын
Thank you for these awesome commands!! They help a ton!:)
@acenatanaelespinosa89515 жыл бұрын
Punch line and Comedy skit, Always the best! Blessings Ark!
@LlyanAustria5 жыл бұрын
Thank you!!:)
@keishawashington47474 күн бұрын
love it all as a beginner!! I made notes and will use all of them. Thank you!
@TaenyKim235 жыл бұрын
Tbh I'm not an architecture student or anything who's related to that field. But of all the Filipino KZbinrs, your contents are the only videos that I actually finish 'till the end (literally) hahaha. It's very informative and super straight forward. You do not exaggerate on screen. Your voice is moderated and not pesky which makes everything feel comfortable and chill. I also like how every content that you produce has substance. You always make sure to introduce topics that people would be genuinely curious about and where people could actually learn and apply it to their lives. hahahaha Ahh. I'd also like to acknowledge the smooth editing in this video 😂. wala lang share ko lang, more power to you!!
@LlyanAustria5 жыл бұрын
Thank you for the awesome compliments pal!!:) It encourages me to make more videos!! I'm glad you appreciate my work, it means a lot!:)
@baconsledge5 жыл бұрын
Great sense of humor and good tips, Llyan!!
@LlyanAustria5 жыл бұрын
Thank you for the compliments pal!:)
@Fc9ers5 жыл бұрын
2:05. turn on edgemode. type "edgemode" command. type "1" this commands allows you to extend/trim to the nearest or chosen perpendicular line, even if its not right across like its shown in your screen. in your case the line would extend to the perpendicular line on the top left.
@LlyanAustria5 жыл бұрын
Wow great command pal!!:) Thank you!
@ElectricChaplain5 жыл бұрын
5:35 The green selection tool is called a Crossing selection (as in, it selects what it crosses), and the blue selection tool is the Window selection (as in, it has to be in the window to be selected). And you're not a selection master until you know about ssget, entsel and nentsel :)
@LlyanAustria5 жыл бұрын
Ohh what are these ancient super secret commands you are telling me haha!!:)
@jtnexus5 жыл бұрын
I'm learning AutoCAD as part of my course, so I thought I would know most if not all of these. Never knew about the overkill or oops command, so you learn something new everyday! Thanks Llyan, great vid!
@ixicnika5 жыл бұрын
I have that same mouse for AutoCAD; escape, delete and enter are my favorite quick commands. Thanks for the heads on overkill and oops!
@LlyanAustria5 жыл бұрын
You're welcome pal!! It's my favorite mouse so far!:)
@PrathamPincha3 жыл бұрын
can you pls share the brand and model numner of the mouse. thanks.
@micahg1965 жыл бұрын
You can extend to a line that isn't there by changing trimmode and edgemode to 1. Also when copying you can press ctrl+shift+v and it will paste as a block. When it comes to the selection boxes, if you press shift you can deselect whatever you want. Save all and close all is dangerous if you are not paying attention. The command "oops" only brings back the last thing you deleted. It will not do more than that. Two other commands that people should know are "pspace" and "mspace" these commands are very useful when working with layouts with precise scales. Another command that is very useful for making layouts is "vpsync" and "chspace". Another great tip is right mouse button press and hold. If you want to deselect everything without hitting escape you can just hold right mouse button and they will deselect. In addition, if you have something selected you can can hold the right mouse button and drag somewhere for a quick copy, move, rotate.
@LlyanAustria5 жыл бұрын
Thank you for these additional commands pal!!:)
@spiralingspiral72 Жыл бұрын
the OOPS command is an ancient piece of archaeology from the 90s civilization of autocad users. basically it was there before the Undo Ctrl+Z command
@micahg196 Жыл бұрын
@@spiralingspiral72 yes but oops saves so much time and I use it all the time. It's better than ctrl+z
@ianrichards63523 жыл бұрын
Omg the oops command... How did i not know about that. Amazing. Also overkill is super helpful
@annawang55754 жыл бұрын
thank you so much, for a beginner like me, it's so helpful, good job!
@gateCodeKC Жыл бұрын
another pro tip: asign alias shortcuts. makes your life so much better and faster like I have 95% of all the commands that I usually use on the left most part of the keyboard. e.g. copy = 1, move = 2, layer on = 1+2, mirror = 2+1, etc. arch autocad draftsman for 12 years
@w.b.t.1272 жыл бұрын
Seen a lot of videos on autocad. You are by far the best I've seen and enjoyable. Keep it up. Thanks.
@INIRE955 жыл бұрын
Love the OVERKILL and OOPS command!! Thanks Llyan ✌
@LlyanAustria5 жыл бұрын
You're welcome!!:)
@Taima475 жыл бұрын
the amount of times I have pranked myself into using the circle command instead of the copy command.... especially after selecting different things... you are a godsend bless you
@LlyanAustria5 жыл бұрын
Yeah those commands are super confusing haha!:)
@Jasonthehammer5 жыл бұрын
I started using “extrim” to trim all lines crossing a cut plane And “Lineworkshrinkwrap” to create polylines around several object that are touching each other
@LlyanAustria5 жыл бұрын
Awesome additional commands pal!:) Thank you!
@tomcologner19434 жыл бұрын
Love your lame sense of humor 🤣🤣🤣 you're doing great job, keep it up. Cheers bro
@itsmekenmaa Жыл бұрын
overkill and oops command really life saver!! thank youu
@alexnelson85 жыл бұрын
Holy Cow! OVERKILL and OOPS are incredible life savers. Thank You!
@LlyanAustria5 жыл бұрын
Happy i could help!!!:)
@dedu984 жыл бұрын
THANKS! Overkill and Trim Space Space will be super useful!
@Ian-gu1fr5 жыл бұрын
Just an addition to the trim/extend command, I personally prefer hitting shift as it toggles between trim and extend. For example, do trim and while holding shift, it switches to extend and vice versa.
@LlyanAustria5 жыл бұрын
Thank you for the additional commands pal!! It helps a lot!:)
@fahe_ph5 жыл бұрын
Thanks Llyan. I loved "Oops command". That's amazing when i think about the time that i lost in certain projects ^^ That will be good if you do a part 2 of this video. Peace !!!
@LlyanAustria5 жыл бұрын
You're welcome pal!!:)
@greatpharoh03035 жыл бұрын
Llyan.....you made AutoCAd fun and practical! Your gonna love this one........shift and right click >>>> takes you to snaps ; ), but don't forget to select what you want to draw first, line rec, circle, etc.
@LlyanAustria5 жыл бұрын
That command was awesome pal!!:)
@johnjasson44704 жыл бұрын
Excellent video. I am self taught and this was a huge leap forward. Thanks.
@jolak.9853 Жыл бұрын
that was exactly what I needed , thank you so much
@danamante11603 жыл бұрын
Architect Llyan in the trim & extend commands I found it more easier to just click the trim or extend icons then right click and hit the line to be trimmed or extended.
@jacintamaenares91555 жыл бұрын
Thanks! I was watching ur videos even though I'm not yet starting Architecture school
@annmetiam83333 жыл бұрын
Hi, it's my 2nd day mg-aral ng AutoCad, and im glad na nakita ko itong post mo. I thought ung overkill and oops is for title lang, but it works. Now, im excited to see all your vids. Hoping to learn more from you.
@FlauschWoelckchen5 жыл бұрын
I have my autocad final in less than a month. You saved me. :D
@LlyanAustria5 жыл бұрын
I'm happy i could help!:)
@golfhacker90514 жыл бұрын
Did you pass? Distinction 98.75%?
@Rk-ve7hb3 жыл бұрын
I didn't know about overkill, oops and the double click scroll to zoom out the entire drawing. Thanks for this knowledge💛
@YohanSeals2 жыл бұрын
Watching this para matuto ako kung paano ako gagawa ng elevation and structural plan ng akin fence and house extension.
@cloudezachary20273 жыл бұрын
Thank you Lods, seen this before and now rewatching it to help me with my C.A.D classes..
@aniketkalra96013 жыл бұрын
For the last double scroll command u can also click Z enter E enter to find ur lost project
@frankpalcone63924 жыл бұрын
Buti nalang nakita ko tong video mo sir idol Llyan. Laking tulong to sakin.
@ziggyo59095 жыл бұрын
I really loveeee your videos they’re very useful and at the same time very entertaining
@LlyanAustria5 жыл бұрын
Thank you for the encouraging comment!:)
@ijustfelldown4 жыл бұрын
Bruh I've been using AutoCAD for 3 years and doing actual engineering drawings for clients. I only knew the trim and scroll-pan commands out of all these. Really makes me sad thinking about all the important time I lost without knowing these shortcuts that no class has ever taught. Thanks a lot!
@Charlesssssss4 жыл бұрын
sorry, but doesn't engineering has autocad for their course also?
@ijustfelldown4 жыл бұрын
@@Charlesssssss It does but the syllabus also depends on the college. Mine didn't even have any computer related assignments - ever. We did all our drawings on papers and it's pretty obsolete these days. CAD was just introduced in a single 5 hour session. So me and my classmates had to learn it ourself.
@dhabstudio3 жыл бұрын
You are weird genius 🤣🤣..many many thanks for sharing tips
@ashwanipratapgautam63122 жыл бұрын
Hey bro I am using autocad as a designer for year but still unaware of some of these commands.... Thank you bro for these useful commands.... Specially Oops
@shawnwolfson67045 жыл бұрын
I use the Burst command once in a while. Also Using CP and WP after some commands like erase is useful
@LlyanAustria5 жыл бұрын
Thank you for these additional commands!!:)
@gayanperera224 жыл бұрын
Super useful commands.Thanks👍👍👍
@sushilsanthosh85935 жыл бұрын
Haha I have the same problem too with middle mouse button.. use it a lot in AutoCAD and SketchUp to the point that it doesn't click so had to reassign the middle mouse button function to the button near my thumb finger.. glad I had a 9 button mouse to customise my buttons for cases like this XD
@landewell68625 жыл бұрын
R A G I N G P O T A T O SAME. My previous mouse scroll got murdered. I had to buy a new one hahaha
@LlyanAustria5 жыл бұрын
Autocad should make a mouse that has a specific unbreakable scroll button!:)
@AbhishekSharma-ej2bw2 жыл бұрын
Good command i learned five new command from your video Thanks.keep posting new hacks of auto cad
@ryansolomon79225 жыл бұрын
Didn't learn anything new, but your video was awesome :) Would like to see more
@LlyanAustria5 жыл бұрын
Thank you pal!!:)
@itssomething58145 жыл бұрын
Been watching this video a few times before i actually start using autocad. Now that i've came back after learning autocad, dang.. I realized how mind blowing these tips are..
@LlyanAustria5 жыл бұрын
Haha thank you pal!:)
@itssomething58145 жыл бұрын
@@LlyanAustria no, thank you haha
@tia96895 жыл бұрын
Hey Llyan can you please do a video on how to avoid smudges while drafting
@LlyanAustria5 жыл бұрын
Good idea pal!:) Thank you!
@assaatarsyad71584 жыл бұрын
Command oops will help my project1👌 great tutorial. Thanks buddy
@annfraley-mylife Жыл бұрын
It seems to me that in the 80s, we used to choose 'trim' and then 'm' for multiple, for trimming more than one line.
@enlighteninghumor65265 жыл бұрын
Thank you very much for sharing your knowledge. It helps immensely.
@LlyanAustria5 жыл бұрын
You're welcome pal!!:) I'm glad i could help!
@reyacebes6924 жыл бұрын
Thank you, sir. Can you please make a cad tutorial for beginners ?
@zynabal-helfi23905 жыл бұрын
Llyan, please draw a floor plan and section on autocad as a tutorial! Your process and super saiyan hacks will shine. Happy New Year!
@LlyanAustria5 жыл бұрын
Thank you for the great suggestion!!:) I will add it to my video ideas to do list!:)
@gjlol_5 жыл бұрын
thanks for all these tips for us begginers. it'll help us to do our tasks more easier 👌
@LlyanAustria5 жыл бұрын
You're welcome pal!!:)
@erycahjulestacbobo85654 жыл бұрын
have you tried the oops command like u accidentally deleted a part of your project and then u saved it... u only notice the missing project next morning.... and the oops command was great hack
@cthuthu3335 жыл бұрын
Thank God for this video because there been SO many times I've had to poop and did not know how to save my drawings fast!
@haroldwilsoniii19805 жыл бұрын
Xline (xl space) command is super helpful to me. Also " 'cal" expression "mee" (middle of endpoint to endpoint) to find centers of geometrical shapes. Put a "-" in front of many commands and you get rid of dialogs for that command use. Example -array. Txtexp for text explode into lines (helpful in CNC drawing cases sometimes).
@LlyanAustria5 жыл бұрын
Thank you for the additional commands pal!! They help a lot!:)
@jasherbangha-on36985 жыл бұрын
Thank you talaga, Kuya. May AutoCAD (technical drafting) contest ako bukas. And these hacks super help.🤘🖒
@LlyanAustria5 жыл бұрын
You're welcome!!:) I'm glad i could help!
@jasherbangha-on36985 жыл бұрын
You wouldn't believe it but I ranked top 6 out of 16 participants. And I wanted to thank you, Kuya. 🤘
@ednakirkland17063 жыл бұрын
on the first one you can just select all lines and type trim. Now you can trim any intersecting lines you want.
@matth67625 жыл бұрын
I have been a pro cad designer for 11 years. This is the first time i have ever heard fo the OOPS command. I dont believe it. Im going to test it at work in the morning.
@LlyanAustria5 жыл бұрын
Alright pal!! Tell me when it works!:)
@matth67625 жыл бұрын
Amazing, it worked lol.
@ant7lop5 жыл бұрын
On your copy tip. Select what you need then left click and special copy, now you can copy to onther dwg :)
@LlyanAustria5 жыл бұрын
Thank you for these commands pal!:)
@raisanultonmoy46484 жыл бұрын
thank you brother, those are very useful commands. keep up the good work and waiting for the next episode...
@devinburden345 Жыл бұрын
Thank you for info, this video was hilarious!! 😂
@lenzedoro19434 жыл бұрын
...among those, only the green/blue selection is what i know,......thanks liyan.......
@airenbanlos68402 жыл бұрын
Thanks for the big help bro!
@sauravmuralidhar24294 жыл бұрын
So Helpful!
@davsportal13582 жыл бұрын
Ang galing nun sir...paano mu nadiscover ang mga un?sadya bang napindot mu lang ang mga technique na un?hehe
@sarahcantshake61435 жыл бұрын
No kidding, overkill and oops have saved my life on so many occasions. I'm glad you're actually showing these tips because you have no idea how much I had to peruse the internet two years back to find out that overkill even existed, because my project files started getting so heavy due to the unnecessary overlapping lines from all the exploded blocks I'd used. And pffft honestly autocad hacks actually can make you low-key popular in archi school no kidding people actually ask me stuff because I've helped rescue urban design projects for them
@sarahcantshake61435 жыл бұрын
Also a very happy new year to you mate! I hope this year's great for you and your channel grows to the levels it deserves!
@landewell68625 жыл бұрын
sarahcantshake Do you know any other hacks like overkill? I went wild by knowing this overkill command in this video. It would have made my previous plates easier.
@sarahcantshake61435 жыл бұрын
@@landewell6862 the purge command is really helpful to get rid of layers that youre not using. regen command to regenerate curved surfaces that have somehow turned choppy and segmented. spline to make random irregular curves and organic shapes that polyline wouldnt let you make easily (helped a ton on my interior design project). knowing about lisp and how to install basic ones is super useful. ole image insertions are really useful if you're working on group projects or keep shifting your files around.
@LlyanAustria5 жыл бұрын
Happy new year pal!!:) Thank you for the encouragement!
@jhanebaby5 жыл бұрын
Wow! Thanks for this tips! some of it, i use in my work, watching your video i get some idea. Bless you. 🙂 Subscribed!
@LlyanAustria5 жыл бұрын
You're welcome and Thank you for subscribing!!
@vinylbugg35135 жыл бұрын
Can also copy inside of the Rotate command. Type RO for rotate, select objects you are wanting to copy, select base point, press spacebar, hit C (for copy) and will allow you to make a copy of the items to whatever rotated angle you wish, can even use a reference angle
@LlyanAustria5 жыл бұрын
You are a master of AutoCad shortcuts!! Thank you for these pal!:)
@neiljohnbascuguin30705 жыл бұрын
Very nice video sir. Keep it up 👍
@aidahrazali15125 жыл бұрын
WHAT THE HECK I LIVED TWO SEMESTERS WITHOUT THESE COMMANDS????? DO YOU KNOW HOW MUCH I NERDED IT OUT WATCHING THIS?????
@JasonK19925 жыл бұрын
I've been working 5 years without some of these commands lol
@jojoestrella86745 жыл бұрын
try ex then double space.... let's you extend any line to the next line... much like the tr double space heto pa... select any object then click rmb and drag to another position. you can move, copy or make a block of the selected objects
@LlyanAustria5 жыл бұрын
Awesome shortcuts pal!! Thank you for these!:)
@phillipgrande91475 жыл бұрын
LoL ithought that oops just a title for the command mindblown dude hahaha thanks very helpful for future designs!!!
@LlyanAustria5 жыл бұрын
You're welcome pal!! I'm glad i could help!!:)
@jirifanta4031 Жыл бұрын
This helped a lot thank you
@ant7lop5 жыл бұрын
Deleted, work deleted, work, Ok now you notice needs to go back. Select all your work and copy to clipboard. Now undo until where you want. Now paste and all your work is together :)
@vinylbugg35135 жыл бұрын
For the scroll wheel, can change that to use OSnaps, type in MBUTTONPAN. change it to 0 or 1 to shift between pan and OSNAPS
@LlyanAustria5 жыл бұрын
Thank you for this tip!!:)
@philnolan71935 жыл бұрын
The Quick Select is one of my favourites
@michaelrivera52564 жыл бұрын
Very helpful men. You really are a blessing. I'm a beginner and now I feel like a pro LOL.😅
@KanhaiyaKumar-vv2lv Жыл бұрын
It works! Thanks a lot.
@fkersh5 жыл бұрын
Incredible tips!
@Greedexile4 жыл бұрын
Laptrip, informative and enternaining video. Nice
@armanramezannejad40124 жыл бұрын
Thanks for your useful video, I think you can add "Trim+F(fence), LE (Leaders) as well.
@osamaazab58213 жыл бұрын
Wowwww, thank U for this tips , it's really great 👍❤❤
@klitipvlog50522 жыл бұрын
just found a tutorial as good as this, so want to study seriously again, thank you
@alexangela44065 жыл бұрын
You are so useful 😊😊😊 I love your channel!!!!!
@LlyanAustria5 жыл бұрын
Thank you for the kind compliments pal!!:)
@-pael20234 жыл бұрын
in addition to "special copy command" there is "special paste command" Ctrl + Shift + V will group your copied file into 1 :) this would be best for overlaying floor plans btw notice me senpai llyan HAHA
@triamberonilla24273 жыл бұрын
No joke with the Oops command! 😂
@albertvallecillo135 жыл бұрын
Tracking command:: TK allows one to move through workspace and use dimensions to draw discontinuous object - command L, draw the line+TK, dimension one wishes to move away from end point to next, enter and another line begins at the coordinate to where you want it to go.