Secret Profile Pipe! WHY DO WELDERS NOT SPEAK ABOUT IT

[@charlessawallich1870]

Native drum music is a must when doing this type of work

[@aussiefarmer8741]

I thought I was watching "JUMANJI"

[@KuanyshbekKonysbekov]

😮😊

[@KuanyshbekKonysbekov]

😮😮

[@---....---USAMA---....---]

Top 3 mysterious in the world 1: Egyptian pyramids 2: Area51 3: KZbin recommended (edited) Hey Thanks for 2k likes i never expect this

[@Hlodowig1989]

4: Peoples thinking they are originals writing same shit than everybody.

[@edgarfgomez]

5: Why do welders not speak about it

[@Convolutedtubules]

@@edgarfgomez 6: Why did I click on this

[@daboy1621]

Hehehe...

[@GuuJiYA-a.k.a-TheCrafty]

LMAO so true x)

[@Tom-S1981]

I've been asking my welder about this for years, but he refuses to talk about it

[@ironwrx]

Golden Dawn Hierophant welders can’t talk. You should ask your weldor about it!!

[@Bix12]

my personal welder won't shut up about it

[@Bix12]

@@ironwrx mine's programmable w/droid voice feature

[@sudheerchauhan7267]

🤣🤣

[@nargarex2390]

"Why do I hear the *drum* music? "

[@the_db_gamer9970]

I've seen a lot of people talking about "the craftsmanship" and how "it looks like it would be stronger" but if you want to talk about craftsmanship and strength we should talk about how he just stacked tacks on tacks without cleaning them in between. More than likely The metal did not get hot enough for the weld to stick properly and there Will be plenty of slag inclusions that will open up when that thing is under any form of stress.

[@TheyForcedMyHandLE]

I'm not sure that he cares about the craftsmanship as long as he gets the 60M views.

[@juanfadez6489]

If he was using 6010 which it looked like he was then he’s fine it will penetrate

[@trevordavison2182]

That was my first thought when I saw that

[@alecksluciferis4188]

The famous full-tac-weld for when you have no idea how to weld. As-seen-on-youtube.

[@THETRUEKING12]

🥁 The drums are a reminder that we are stuck in the KZbin algorithm. There’s no escaping this matrix.🥁

[@matrixredpill]

There is no spoon.... well, not unless you fancy welding one together yourself.

[@elliotmason2911]

I like Baby Yoda videos, Marathon running tips and video rants about why Man Utd are so poor: why this came up I have no idea.

[@joemcg0241]

Whoa bro

[@SnakeEyesSOG]

We got sucked into a KZbin Jumanji and cannot escape until the video is complete lol

[@WaffleWaffles]

Best human comment

[@christianteddy]

the reason welders don’t speak of it, is simply because this isn’t pipe. this is square tube, taken from the natives

[@leehunter1246]

🤣

[@christianteddy]

Steven Hickman it’s square tube buddy

[@christianteddy]

Steven Hickman pipe: hollow cylinder. tube: any shape and size, hollowed.

[@venkyroman8505]

me: why this KZbin : its recommend my brain : go for it watch it fast

[@mattobrien2511]

Lmaooo Me : 5am cant sleep why not get started

[@AC-rx6fr]

same

[@CASH-TO-THE-MERE101]

Venky Roman 👀

[@keasone]

Venky Roman this!

[@blacklegacyassets]

Yes

[@trevordavison2182]

This music makes make feel like I should be doing a rain dance around him while he does this

[@SevenLovedFrench]

Music free of copyright, that's the choice.

[@umeshkumarsharma955]

😂😂😂

[@lore78]

I did it, but it didn't rain :(

[@Mantle777]

Lmao

[@PsyQoBoy]

@@SevenLovedFrench didn't realise sawing sounds was copyrighted was totally unnecessary to add rain dance music to it.

[@HisMajesty99]

This Corona quarantine has me literally watching anything KZbin recommends.....

[@hunteraclm3597]

Lol.....

[@hrantmuxdusyan3274]

@@hunteraclm3597 Хаз

[@sergioricardo5093]

@@hrantmuxdusyan3274 não oque vc disse mas tem haver com a quarentena kkkkk

[@E_se_Endrick_fosse_assim]

Sergio Ricardo bicho até BR tem aqui kkkkk

[@allanroberts7129]

Anything....?

[@briansilver6196]

30 years iv been doing welding and that's the first time iv seen that done ,excellent bit of work

[@300fans]

Well, as long as you ignore the awful welding, it does look alright.

[@makeitloose5315]

Exactly what I was thinking crazy panda 😂 why not just run a nice stringer

[@bluefalconssuck5881]

_"A grinder and paint makes him the welder he ain't"..._ but his geometry skills are on point.

[@ibidu1]

Considering it is thin metal, and hes stick welding, very difficult to stick weld thin unless you use small diameter rods. Those welds dont look bad, plus you dont no the application. Maybe these were handrails, and those are pretty strong for that purpose.

[@trollslandan]

But u didnt get the point of the video then.

[@bluefalconssuck5881]

1. I actually weld for a living. 2. I use this technique when called for. 3. The quote is in recognition of the nature of welding thin metal. 4. It's actually a COMPLIMENT to his skills. 5. Those that weld would recognize this. But please do go on... Reading comments from people whose experience in burning metal starts and ends with sticking knives in toasters & power outlets is funny as hell.

[@july8xx]

@@ibidu1He was stitch welding, Effective but not pretty hence the extra grinding.

[@craigm5601]

He did a fine job thanks 👍

[@mvonsmallhausen3221]

Your secret is safe with me. Me and the other 60 million people who saw this.

[@senrukmuthunayake9961]

Of course.😂😂😂

[@gothips]

Me and the rest of the 60 million agree with you . :))

[@shadedstory]

😂

[@CattleCluj]

You know what they say. 60,970,409 people can keep a secret if 60,970,408 of them are dead. So let's get started. Who's first?

[@engineergaming4295]

Here at 205 lokes

[@michelauspimmelberger]

Here is why no welder talks about it or uses it: 1. too difficult to cut with simple machinery, so you need too much time for a joint 2.structural integrity, the reason both ends are cut to 45° if you want to reach 90° is that the forces are equally distributed throughout your workpiece 3. welding stress, since you weld on one side more than the other, the stress introduced due to the heat will deform your workpiece in an asymetrical way, which is what you dont want

[@lukasrockdriguez5230]

Michel aus Pimmelberger More like 1. So you click in the video

[@kws4e]

Dein Name erleuchtet meine Nacht. 😂

[@luisbravo9280]

Hello, your arguments are very valid although I have for me that if the structure does not demand extraordinary strength, a very good finish and view is achieved. Regards.

[@dredbud9272]

The piece may be decorative, so shut up

[@istolemoneyfromthegovernme7653]

ok

[@seansean3765]

Bunch of dudes worldwide laying in bed with no socks on just watching a random video of a pipe being welded. You’re one of them.

[@SteakBawse]

I have at 7am. It's 1.30am here and I don't know why tf am I watching this

[@sweetjohnny8211]

Ummm, actually sockless on the couch!

[@lokotroko1]

On my break at work

[@baweasel]

You got me :D

[@sirmartinclarke]

Wife nearly caught me

[@guser436]

I asked my uncle and he said "we have orders to complete ain't nobody got time for that" that's why welders don't speak about it 😂

[@anthonycope8637]

Yeah a 45 butt joint works just as well you would only use this if you wanted the rounded edge

[@GYPSY400]

I agree.. looks nice, but if your welding on the clock it's way quicker to weld at a 45 or 90 cut

[@campbellpaul]

If you are a production welder, this kind of thing separates your products from the rest...

[@cjrouse9508]

@@campbellpaul nah, time and efficiency matter more. Unless you are some artist, this joint is not needed.

[@guestuser3192]

Plasma cutter would speed up the process a fair bit

[@andhewonders]

Can't get over how your neighbour just kept drumming through all of that cutting work.

[@tiernan787]

This is the funniest thing i have ever read..

[@giantgungames8739]

:D and then he suddenly stops at ~4:40 and we are like: WAT?

[@jawshlitelife]

"WHY DO WELDERS NOT SPEAK ABOUT IT ?" entire video - doesn't talk

[@Inthenatureslap]

That's why they don't speak 😂

[@dubtube6691]

Clickbait

[@Inthenatureslap]

@@dubtube6691 whatever but it's interesting to watch

[@dubtube6691]

@@Inthenatureslaptrue

[@tusharkhakha6182]

🤣😂😂

[@schaschlik3455]

Man ich hasse es wen KZbin die Überschrift ins deutsche übersetzt dann denke ich immer das es ein deutsches Video ist.

[@nono-dy4sc]

Ja, ich dachte es wäre ein polnisches

[@CRAVTBOARD]

Und ich dachte, es wäre französisch. 😂Mal ehrlich, wo gab es denn hier einen Dialog? 🤣

[@hope5019]

Ich frage mich in wie vielen sprachen es übersetzt wird und anhand von welchen kritieren werden titel übersetzt 🤔

[@brianmora9050]

Jaja Mich tog aborne trabish ghastergh mAh!

[@youarenotlikeme6224]

Ich dachte deutsches video...und denn sehe ich kommentare aus aller welt...haha

[@redflags6583]

My dad, who's a welder, saw me watching this and made me swear to never talk about this again. You're treading dangerous waters, friend.

[@Ricardo242-y2l]

Hahahahha the best comment so far

[@spaghettigod1794]

Justin Umali really?

[@Jypsie415]

But... "WHY?!?!" LOL Seriously, though... is this really some weird secret or something? I mean, it's a cool mathematical trick and all, but any mathematician should be able to tell this "secret" and not need to know how to weld.

[@gichbuoy]

🤣🤣🤣🤣

[@y.z.6517]

@@Jypsie415 Yes, all engineers and scientists that are not completely incompetent can do that maths, but thinking and calculation will take hours.

[@zachariahdaugherty2787]

Grinder and paint makes you the welder you ain't.

[@ChargeNReact]

WRONG

[@wanderborn.]

so true

[@JackTalyorD]

If you need a ginder to make your welding look good your a grinder not a welder..... Me I'm a bird shit. Because when someone sees me weld they go What the fuck is that

[@krzkam7792]

.

[@ArkansasPilgrim]

Good welds don't have to be pretty, although that's a plus. My brother and dad were both good welders. I saw their work,and it put to the test. Their welds didn't look horrible, or messy, but they weren't pretty, either. I worked with them, and with another guy who made the most beautiful-looking clean welds that I've ever seen. They wouldn't hold $#!†. He made something for me, and one of the welds popped off when I tried to bend the piece a little to make an adjustment. Grinding the weld smooth is a good practice. The build up on the surface doesn't add any strength, anyways.

[@omniversling]

You know, if this guy can improve Square Tube like that, imagine what he could do for You Tube!

[@shirleyboy8859]

Hilarious :-))))) I got ya

[@pratapsravi]

Wonderful description of his workmanship

[@UberLummox]

He just bent KZbin's mind!

[@edjames1664]

KZbin is already bent ... to the left.

[@omniversling]

@@edjames1664 Yes, and Hitler was a Socialist too...so 'left' he went all the way around to the 'right'. YT is the new Goebels...(read 'Propaganda' by Edward Bernays?)

[@RedEyedLeviathan]

coulda warned me when you were about to weld bro. almost lost my eyes without my mask on!

[@chris17shooter]

Mojo Seriously man, lol, we should’ve been wearing our PPE while watching him

[@TungstenCarbideTempe]

He got me with a grinder

[@anthonycreed3023]

😅

[@mahmouddejavu9864]

هههههه مخفففف دمككككك

[@nopretribrapture2318]

@@chris17shooter yeah don't get arc eye agony from hell

[@TBaroon]

2 days 11 millions views welders are furious their secret has been exposed

[@lucabevilacqua1001]

Now 12169000! 😳

[@thegg5097]

This had nothing to do with welding. Actually got dumber watching it

[@MaryDKidd]

Stupid method, this is so time consuming and unproductive xD and what are the advantages of this? Nobody would know 🤷‍♀️

[@jerrydelacruz5119]

@@MaryDKidd I guess if you were making an arm rest on a chair or bumper guard it would be worth the extra time.

[@sobreaver]

13,544,125 views • Jan 18, 2020 Still, glad there's a greater appreciation for craft rather than mean memes.

[@reubenj.cogburn8546]

I have an irresistible urge to pierce my nose with a bone.

[@Adirtan]

i would rather weld it to my nose

[@mrbigbag]

I have the urge to drive a bamboo pipe through my lower lip.

[@Knuddel00]

😂😂😂

[@crazysarkon297]

Sulik? Is that you? :-)

[@davelangford2439]

Nobody cares.

[@MrSpeedyAce]

You win again KZbin. I clicked on this and watched it.

[@melkiy582]

Watch it again, after read my comment.

[@tonietoney5917]

This was refreshing after viewing several KZbins about septic tanks. I'm still not sure how I got here but am glad I did. It just goes to show that at 80, I still have a lot to learn. Uniqueness is appealing and though there are faster ways to do a right angle, this has a certain appeal. Thanks!

[@constructionsecrets6048]

copied from :- Cara bending besi hollow/kotak tanpa alat bending

[@roho4373]

@@constructionsecrets6048 that video is a hack job. This video is mastery at work. Huge difference in workmanship and clarity.

[@constructionsecrets6048]

sorry, but i disagree. Look at the rest of the comments. I think i will weld the same corner. I will give credit to where it came from. I will tell you in my vid why welders dont talk about it.

[@Unisoldat]

У нас говорят: "Век живи, век учись!" (We say: "Live for a hundred years, study for a hundred years!" )

[@TABIBI-OP]

Only idiots work that way, it's much longer than a 45 degree cut

[@mymistymountainhop]

I immediately called my welder friend and we indeed didn't speak about it.

[@heavensentmarshall1481]

😂😂😂😂

[@steveklick]

Lol.

[@dr.dickie1418]

Did you instead talk about that filing!! Oh my! Forward only.

[@jed-henrywitkowski6470]

Lol

[@steveklick]

@@dr.dickie1418 lol

[@hawk1093]

He must get paid by the hour.

[@niccadoodles]

I'm no welder but I wanted to laugh by the 1:33 mark.

[@joshua.merrill]

Union jobs, lol

[@DemnRaig80]

That's how most jobs work.

[@philgraves7814]

If I weld something for even just 2 mins I get paid for a full hour perks of being a non union mobile welder

[@hery8491]

Some like it, some don't But it always a good thing to share knowledge. Thank you for the video😃😃

[@glenn8773]

@Hery Your profile pic goes well with the audio track to this video

[@nyitun2139]

Yes,thats right

[@deejarvisful]

I'll have to remember this the next time I want to spend a whole day putting a right angle in a piece of box section. 😀

[@xbsickness]

I fell asleep, woke up had breakfast, pulled my dick and came back to KZbin and He was spray painting up a funny looking join 😀

[@bondovwvw]

I hope you get paid by the hour!

[@Rubbernecker]

@Dee Jarvis, no it only takes 4 minutes and 53 seconds.

[@gabrielpichardo1492]

I was waiting for the answer to the question the whole time

[@debunkthejunk1]

The boss called, he loves your work but we only billed this job 1hr. You're fired.

[@mrrodneyalong]

Because most welders are trying to make a living and the extra time it takes to do this, with no additional structural strength, is wasted. A stronger and better looking product can be made faster by using other, more standard techniques.

[@jasonfryer7002]

Looked like 12, or 14 guage...pretty sure it wasn't for anything beefy....make a good patio table though😛

[@Lmr6973]

@@thunderpop609 I'm interested in knowing myself. Maybe he will let us know where his video is so we can find out.

[@adamjordan8486]

E nak you could just get two seperate pieces of metal create the curve in one end and weld them together. Personally if you use a plasma cutter its alot easier not as clean though there is some slag left. A torch is about the worst way because it heats up the metal and changes its tensile strength. Another way would be to get a machine and just simply bend the tube which can be done even with something round. There is one secret that welders wont tell you how to create a 45° without damaging the material in any way shape or form but I'm not giving that one up easy lol. Go to google you cab find it there.

[@premix3663]

Pretty cool picture frame heh

[@wayneoneal7952]

I thought the end result looked pretty damn good! I'm no welder but he looked pretty professional to me. A well made video and 1000 dislikes? Bullshit by bullshiters

[@abba136]

Am I a welder? No. Do the various types of pipes fascinate me? No. Do I want to watch a 5 minute video of a guy cutting a pipe? Hell Yes. KZbin is inside of us.

[@puffco4202]

Yes, Watch a random 2 minute video recommended to you. enjot it. refresh KZbin and repeat!

[@abba136]

@@puffco4202 couldn’t have said it better!

[@ANMOL_DHIMAN.]

I am welder 😵👌😁

[@christianarman4555]

First rule of welding club; don’t talk about the secret profile pipe.

[@joannat.9097]

Honestly now everyone at work will be upset the secret is out😂

[@warcloudff]

Popo will be upset

[@jonnywhyte1848]

What is the secret

[@jasonmaxwell5824]

The secret is it’s box section not pipe 👍

[@Tigerchevelle77]

@@joannat.9097 🤣🤣🤣🤣

[@forrestcreek1598]

This welder was kept anonymous to protect his identity because this is such a huge secret. He may even be in the welders witness protection program..

[@PedramBastan]

Isn't that why they all wear masks? Keep blabbing and he/she will weld you into a secret bent tube. Gotta stay gender neutral. You never know what troll will get hurt feelers.

[@alexad7570]

you already said too much... be carefull they are watching you

[@forrestcreek1598]

Alex Ad 🤭🤫😬. Uh oh, I broke the golden rule. Never trust no one!

[@19bo84maryshore]

Since publishing of this groundbreaking video, the welding illuminati placed a bounty on his head.

[@chaosmonkey7037]

@@PedramBastan Basically the idea of the Mandalorians on the TV show was based on the real life of welders. I've heard they were going to call the show The Welderlorian but it was considered too close to the truth and nixed by the inner cabal.

[@orbeq]

Played this with my soundsystem, started to rain.

[@jonhenrywave9043]

I laughed so hard

[@EliteOpticsLighting]

Lol

[@theo.rivera]

LMAO🤣

[@englishearlgrey]

Ha ha ha 😂

[@ayktcylan]

hahahahaha

[@kilroy987]

I dunno, I never hear welders talk about anything. But hey, they must not.

[@pam6585]

My friend who is a welder only talks shit and when he isn't he is pretending to be gay.

[@I3lazedOne]

Lmao sounds about right

[@billgriffiths1685]

I knew a welder once, and all he spoke about was fishing.

[@damienkaletta7524]

@@billgriffiths1685 Probable because it take too bloody long to do this join vs say a 45 cut?

[@bhaveshchaudhari3863]

@@billgriffiths1685 )))))))

[@benclarkson4205]

I *LOVE* when these videos pop up in my algorithmically populated list... because I *KNOW* the comments are going to be 🔥!!

[@latenight3111]

The music making me want to dance around a fire like a primitive.

[@unarthodoxx]

😂😂😂😂😂😂😂😂😂

[@jasonlowinger7919]

🤣😂🤣

[@ytmaximusn1841]

I feel the same...

[@SourceShield]

I painted my face and started eating my dog.

[@ahmedza9303]

🤣

[@lucasodhiambo9584]

I'm just liking all the comments, even the ones written in ancient symbols that I don't understand.

[@ethanjones1521]

Pretty sure that's Russian your thinking of. Can't read it, but I can understand it when it's spoken. Freaking Cyrillic is some crazy stuff.

[@coreyzinke2967]

They're probably saying the same thing about you

[@dartwelder7295]

@@coreyzinke2967 nope. We don't. =)

[@ПетрСтраумал]

Lol, cyrillic is younger, than the latin alphabet :)

[@lucasodhiambo9584]

@@ПетрСтраумал Really!!? Nice to know, thanks.

[@tatodelgado2707]

Excelente, justo lo que necesito en estos momentos. Gracias por compartir tus conocimientos 👍👍👍🇻🇪🇻🇪🇻🇪🙏🙏🙏

[@mr.rabbit5642]

When your drawings are perfect but you turn out 1.5mm off: HAMMER TIME!

[@warrenthomas3168]

Hahahahahahaha

[@josipivankovic2170]

It's what my technical drawing and workshop professor used to call "centring" 😂

[@scream_follow]

YT recommendation: yes this jungle drum welding dude needs our ad money Me: ok

[@shrithanosmaharaj8679]

Hell yeah

[@tobytoxd]

YT: Me: using adblocker

[@pablootzoy9822]

Yes 🤣🤣

[@EarthboundApocalypse]

Me: Using YT Vanced for Android. :P

[@amaury_permer]

I'm premium user and this is worth it lmao I learned how to do something that I didn't even know that I wanted to know

[@abhishekshinde2411]

Another secret nobody talks about : how KZbin recommendations work

[@falloutpropguy]

Fucking right How for my KZbin searches are lego Star Wars the other half are cowboy gun videos wtf is secret welding

[@patrtickcyr9075]

Haha! That was literally one ove the worst welding jobs I've seen. Next time don't paint over it...you can actually see how bad it is through the paint.

[@abhishekshinde2411]

@@falloutpropguy ikr 😂😂

[@Leemars123]

Let's build a rocket.

[@waraynonch.8972]

Gute idee, danke! Wünsche einen schönen Tag...🤗😇

[@jontisdall6248]

04.34..."Hey, the drums have stopped" "Yeah, it's quiet.....too quiet"

[@phillipkarnehm7712]

Oh no! Now comes bass solo.

[@orocs6]

4:35

[@1sm08]

I'm thinking Jon is a Gilligan's Island fan. Am I right, little buddy?

[@jontisdall6248]

@@1sm08 @1smo8, nope, heard of it never seen it. I was parodying the old time western/action movies where the heroes are surrounded by bad guys and there's a lull in the action.

[@1sm08]

@@jontisdall6248 I stand corrected.

[@aculele1225]

Я знаю почему сварщики не говорят об этом: потому что сварщики такой херней не страдают)

[@3518373]

Что вы понимаете в гребаном перфекционизме))))

[@АлександрБосюк-ш9ч]

100%

[@ПавелКолядов-п1ю]

Во-во

[@849568]

Вот и я о том же написал!

[@АлексейМонастырёв-ч4ъ]

@@849568 а я жене сказал ))

[@mr.e8432]

I’m guessing it’s a secret because it takes 20 times longer than cutting a 45.

[@williamtrempe9328]

Maybe you dont want a pointed corner

[@miguelsanchez6465]

Mr. E some applications require a round corner, this is for that, if you cut a 45’ you get a point, totally different... I will be using this on my cart frames from now on so it no longer has a sharp point which will make it slide off Competition easier when I pit manoeuvre them.

[@antoniocavric4322]

So you are saying that you can do 45cut in 14.64 seconds? Please make a video. I never seen a man that fast. I'd like to learn a trick or two

[@VoidplayLP]

@@antoniocavric4322 with cuts and speeding up the footage i sure could.

[@Mushele]

Also this method is much less accurate, imagine having like 3 metres frame with 2 degree errors and it is easy to make such errors with this method

[@chrisgossman4522]

If I used this joint I would never get anything done. Sincerely 30 year welding vet.

[@supremebohnenstange4102]

Maybe if you could somehow plasma cut it! But I don't see the benefit, the stability shouldnt be any different! Only for aesthetic reasons

[@ronchabale]

I done a few miles of welding in my 40 year career, agree 100%

[@red00eye]

Does a welding vet heal iron horses?

[@Core5]

It's purely for aesthetics.

[@chrisgossman4522]

@@Core5 if he was worried about aesthetics he would learn how to weld.

[@blacktemplar8346]

Die schönste "Runde Ecke" die ich gesehen habe. Hab ich allerdings schon in der Ausbildung vor 30 Jahren gemacht.

[@Seitenwerk]

Und warum hast du nun "darüber geschwiegen?" ^^

[@x2malandy]

?

[@GoldenboY-DE]

@@Seitenwerk Das ist wahrscheinlich so geheimes Schweißer Logen Ding. So Illuminati mäßig 😜

[@RypienGT]

I've no interest in metalworking, I'm just here for those sweet jungle beats.

[@Icanfigureitoutintime]

Hey man that was great. Thank you!

[@ChrisWhite.fishing]

The secret is to have word “secret” in the clickbait

[@NikosGardanis]

That's called copywriting

[@Otavio572]

É isso tlg

[@sandylengerich2304]

Thanks

[@Vinwelder]

@@NikosGardanis How do you figure???

[@danielsmith7935]

Well it's no secret now is it?!!

[@nickstar166]

Love how to keep the small used blades around for small cuts like this. Most people throw them away. 😄

[@pratikppm]

That's the music you play when you break the ancient welders' pact.

[@frankcastle8349]

😁😁😁

[@danielfronc4304]

He'll be hunted for the rest of his life. No place is safe, no one can be trusted. There are welders everywhere. Remember Jimmy Hoffa? Welded inside a 55 gallon drum filled only half way up with concrete and dumped in Hell's Gate. This fellow just stepped over the line.

[@pratikppm]

@@danielfronc4304 Now he has lead himself to a life where he can't even breath without looking over his shoulder.

[@joshm5156]

Great video but I felt like A little man was going to jump out hit me with a blow dart halfway through it

[@GraemeGunn]

A little man?

[@xvtf]

@@GraemeGunn yea smol person

[@marquisbois990]

Careful...that’s racist in 2021. Well, as long while racist is still trendy anyways....

[@xvtf]

@@marquisbois990 being short isnt a race

[@omniversling]

Came for the secret, stayed for the comments!😂😂

[@MrThenry1988]

Indeed.

[@PsyQoBoy]

They don't talk about it because like this video , silence is golden.

[@Song26664]

Now that he violated the confidentiality agreement, he's been excommunicado.

[@JesusCruz-my3ob]

I just resive the text massage

[@pedrobury6275]

Last seen in the saw section of his local Home Depot

[@ryanb1874]

Haha. Yeah. Sound like a true union board

[@ihaveaplan.ijustneedmoney.9777]

John Weld

[@Rick-Sanchez-C-137]

Tic toc Mr. Welder tic toc. ☠

[@chassa7266]

The music makes me feel like im slowly cooking in a giant pot why tribal elders play the bongos before they eat me.

[@looper9264]

It sounds like the Jimmy Castor Band playing the Big Bertha/Troglodyte Song.

[@davidem.4689]

Jumanji

[@woopwoopboopboop47]

lol 😂😂😂😂

[@jpjoubert7128]

😂😂😂😂😂

[@jonboysgames1154]

I'm glad I wasn't the only one who thought the same.

[@eric4946]

Seems mostly like they don’t talk about it because anyone you tell laughs and cuts the tube at 45 degrees smacks them together and calls it a day.

[@dannyboy8330]

haha good one

[@dannyboy8330]

its for the click bait xd

[@alexwaln1053]

This old tony has a really good video too on how to do the same thing, just easier. It’s in his welding cart series. Cool idea what this video did, I don’t personally see a practical use though. It takes too long. Mostly because I’m impatient lol. Also, bend radius and K factor, remember to take that in to account if you ever do what’s in the video. The guy in this video clearly knows his geometry and metal bending, or he got lucky lol.

[@bonelesswhiskey2865]

Side note- Im glad i bought a Wire welder, more often then not i see people with stick welders trying to get their arc to start, i didnt want that trouble, that, and im not a fan of having to buy packs of rods. A reel of 0.36 is all i need, they arent that expensive either. Another plus, i havent gotten my wire stuck to random metal like ive seen happen with stick welders. All in all, great video, and to anyone wanting a welder, definitely do your homework on what you want to be welding, your budget for a welder, and other variables. I will say my lil Lincoln Electric FC90 is a great starter wire welder. Lincoln Electric also has starter welding kits, comes with: Chipping hammer, paint marker, magnet capable of making 90 degree angles, gloves, fire resistant sleeves, and of course, a helmet! I highly recommend it because you can plug it into standard house power, no need for big ol plugs. Have a great day, and happy holidays!

[@702Blunt]

Why I'm I watching this, I'm an electrician.

[@tubbsspnkbnk3113]

I’m be a Electrician too started my degree this year

[@philipashdown1958]

I never write comments...but I had to on this one. I'm an electrician saying the exact same thing! However, I make a lot of brackets up for our equipment and I will be using this the next time I build a bracket.

[@daboy1621]

Hehehe...

[@Gettinbentoffroad]

Right I build scaffolding this has nothing to do with my job but it’s nice to learn something new.

[@JBmusicart]

Drummer here

[@obi-wankenobi6307]

Fact: You didn’t search for this

[@alyah727]

Fr

[@TENNSUMITSUMA]

How, exactly, can you prove I didnt?

[@mrlebanon6055]

Fact: I don’t think any normal human can would search for it

[@Mike-my7uf]

Proven by the like button...

[@sunwolf87]

I really didn't LMFAOOOO

[@Batmanananana]

Damn those welders with their secrets. Always leaving us non-welders outside the loop.

[@nostalgio697]

Best comment, hahaha

[@shaneprestidge8097]

The reason he's showing you is because no real welder would use Rhs that thin. And wouldn't really have a use for this in most day to day fabrication.

[@kielovpyriel3752]

Imagine putting in this much work just for a 90 degree angle...

[@sadville13]

To then just weld it shut...

[@Funny_facts_usefull]

And it ist even closed inside Look 3:34

[@connorl7012]

@@Funny_facts_usefull Your a doughnut, its not closed their because it is not finished...

[@Funny_facts_usefull]

@@connorl7012 yea then why does the Video end withput Himmel cutting this one peace out

[@tyree9055]

It could be useful for certain applications, where you want that nice rounded outside corner instead of a sharp one. But it's definitely more labor-intensive for someone using hand tools too.

[@fredericduwe9920]

"a flapper and paint makes me the welder i ain't" fits nicely here

[@TheExplosiveGuy]

Lmao no kidding. I was cringing when he removed the slag.

[@DapperD942]

frederic duwe “if you’re not getting penetration with mig you need to see a doctor”

[@mattjohns3394]

The bigger the blob, the better the job.

[@ryanm3749]

You mean this weld has inclusions?!!

[@pizzadude6615]

If you have to grind it your a grinder not a welder. It's ok I'm both, depends on the material and position.

[@iggybeauchance7406]

wondered for years just how to do this, searched the world over, and here is the answer in Africa...

[@1ycx]

Bruh 🤣

[@ripleytalented7838]

@@iamromain No sense of humor? His comment was referring to the drums in the background 🙄

[@totaltotalmonkey]

I wondered for years just how the best drums would sound, searched the world over, and here is the answer in Pipeland...

[@iamromain]

@@ripleytalented7838 so many dumb people on internet that would claim this being dead serious, that i got fooled.

[@ThinkLascivious]

Lol... everyone is wondering how we got here watching a damn welding video in 2020. KZbin algorithm.

[@diegogonzalez3943]

Muy bueno y necesario felicitaciones 👍👍👍😜😜

[@nonceyneighbor3180]

Answer to the title: because it takes too long and there are drums playing all throughout the process.

[@kameronmurthy6811]

Andre Neil I’m literally crying

[@superwelder24]

Underrated 😂

[@deepsouthNZ]

to appease the welding gods

[@ernestonoir5796]

too long? it only took 4 minutes and about 30 seconds

[@SanketDube]

@@ernestonoir5796 he meant longer compared to how it's traditional done.

[@mp7091]

I've trouble opening a soda can but suddenly I want to dedicate my whole life to metal working.

[@SandyA7_LadyReaper]

LOL!! I was like, yep I can do that this weekend.

[@braydenmiller8021]

Not sure why I’m watching this, I don’t even weld.

[@Mrfoobaer]

Not yet

[@adrianaxelsen9254]

Well... that was not welding either! That was pure bird shit!

[@fuse825]

Same

[@kingrodriguez5207]

@@adrianaxelsen9254 jajaja for real

[@robertqueberg4612]

Next week Mr. Axel son will post a demonstration of his prowess welding thin tube without blowing a hole in it.

[@tiny789]

why because in 45 years as a professional welder i have never done this

[@joshua.merrill]

Because it takes about 45 years to do a joint like this, when it takes 45 seconds to just bend one with a tube bender.

[@email16v]

Because two 45s give you your 90. Weld and be done with it. Carpenters do it all the time!

[@TanigaDanae]

@@email16v In this example even one 45° cut would do the job. The video is still funny to watch.

[@ChargeNReact]

I've been welding for 69 years. This is the proper way to do it

[@markgonsalves]

I think if we test, this joint must be stronger than the other ones. Just guessing.

[@David-ls4qp]

I know why welders don't use this secret trick. Because it takes so damn long

[@blakeholder1017]

I was thinking the same thing! Is it really the trick that is the secret or is how long that method takes the secret?

[@M7S4I5L8V2A]

I mean a torch or a plasma cutter would do it pretty quickly.

[@michaelszczys8316]

Most people even if making a square end fit don’t even cap the open end tube.

[@itsonlyacommentsnowflake3346]

If its a better job you shouldn't worry about how long it takes, I'll always pay a premium for better quality.

[@AAA-vk9vp]

Long....? took 5 minutes?.... Probably less

[@ddistrbd1]

wow, I've been in metal fabrication field for 35 years , there are many ways of making corner joints with round/square tubing, this is just one, there's nothing new , unusual or extra ordinary about it.

[@Zozo806]

but he gave away a part of the riddle of steal. He need to be punished.

[@haroldsanchez8235]

ddistrbd1 no f-/cling shit

[@leonaldobrum]

Ok. Whatever,. I will only point out that he used a very rudimentary and economical way of doing it. Exactly what the masses of tinkers out there need. Good job, IMHO.

[@raynman6466]

Many non welders would not know about this though

[@rthompson938]

Foreman: What the feck ya doing? Stop ruddy wasting time and use the Plasma torch and Mig welder.

[@fredsmith1970]

The first rule of Pipe Club is... you do not talk about Pipe Club.

[@TheGor54]

The second rule of Pipe Club is... you do NOT TALK about PIPE CLUB.

[@kbtube8125]

whats pipe club? DAMN IT!! sorry.

[@abhyuday911]

I’m disappointed in you as you violated it

[@mixter7x7]

damnit- i was an hour late

[@bsmbB]

Gay bar?

[@РафаэльКарапетян-ь8ж]

Спасибо за видио 👍👍👍👍👍👏

[@jsonslim]

I am a member of the sect of the welders, and you revealed our most precious secret! Now we are defeated! Nooooo!

[@Jakiita1]

But he didnt talk about it !

[@UnidadFamiliarCristiana]

Trust me brother, they will never know the other secret!

[@jessedugal6125]

@waptek0 what other movies have you been in besides 8mm 😂

[@Jmeon4eva]

NUUUUUUUUUUUUUUUU!

[@AlliedGamersYT]

I mean that weird was disgusting a high schooler in welding could do something way cleaner

[@stevenfrederick2729]

Forget the subpar welding, are we supposed to ignore the fact that he didn’t even weld the inside of the angle?

[@senseitbk]

I never welded in my life (except for wires) and this was also my thought - why he didn’t add some welds inside, but then i started thinking - would that make angle/construction stronger or weaker (if done incorrectly and material would be “overcooked”)?

[@KeepShreddin]

I thought that too!

[@MrDraXuz]

Well considering his weld didn't even penetrate on one side, but I digress. The reason is expansion. If you weld the inside of the tube, then you will no longer have a 90* bend.

[@rubenhernandez4394]

Music so intense I didn’t know I was also welding when this video ended.

[@yor1032]

Yess

[@FelixUmbra]

Because a "Box End L" Is MUCH MUCH MUCH more time and material efficient. This is the stuff that is for decorative only.

[@DSiren]

but what about the load capacity?

[@S4NSE]

"box end L" lmao

[@FelixUmbra]

@@S4NSE The fuck else are you supposed to call an "L" shape welded out of box section tubing? It's the end of the box section in the shape of an L.

[@nothere7198]

The first rule of Weld Club is: you do not talk about Weld Club. ...but actually I've seen several of this same video for a few years, so I guess people do "speak" about it ;-)

[@low225]

Hes allowed to share welders' secrets because according to his "welds" he's no welder!

[@rhysjones5473]

person merc he never even ran a proper bead. He just kept putting down tacks

[@UnimpressedGoose]

I love when people say they can weld but then they just throw down a million tacks🤦‍♂️

[@shepddg5366]

@Iow225 I said the same I ain’t see no dimes laid at all

[@hardestreign]

Exactly my thoughts. Also, it's called a plasma cutter dude, try one out.

[@eebonia12]

Exactly hahahaha

[@jackknighttheoriginal1956]

4:15 "Remember, kids! Grinder and paint will make you the welder you ain't!"

[@ericbruhn359]

Nothing wrong with grinding turkey shit if the penetration is good lol

[@ericbruhn359]

@Dick Little it's an old hillbilly term, nothing too serious. Like if you forgot to turn your gas on you will be grinding turkey shit all afternoon.

[@CasperRc81]

Some prints call for it it’s not all showing your dimes. Stick welding thin material is prob a chore.

[@jackknighttheoriginal1956]

To all of you who missed the reference, I was quoting a video called "Shit welders say"

[@timmdittmer4654]

👍👍👍😂 you're so right!

[@元一田村-w7t]

日本語にて失礼いたします。過去、英国製の鉄製フレームのベットを購入しました。鉄を飴のように扱いその見事な構成。組み立て易さ分解のし易さに驚愕しました。鉄を日本に於いては木工のように行う貴方の技術、手練に感動しました。ありがとうございました。これからもご健勝を。

[@o_alekseym_a-s5862]

Какой из него сварщик. Даже не крикнул "глаза" а мы как идиоты на сварку без маски смотрим

[@Egish.E]

Алексей o_ALEKSEY [M_A-S] человек ты просто сделал мой день😂😂😂😂😂👍👍👍👍

[@ГригорийМолчанов-р5й]

Ахах))

[@Zakdwarff]

Я тоже подсознательно ждал этой фразы) ГЛАЗААААААА!!!

[@tigrosabertooth4757]

Здраааась! Мы начинаем начинать.

[@yuriibulanov2592]

Пххааа

[@akbuilder7626]

The drums got me so worked up I attacked a neighboring village and killed everyone.

[@kbtube8125]

I struck my wife, and rented sha-ka-zulu.

[@jwillard31]

LOL!!!!

[@armastat]

I suspect there will be a lot of pillagingas well as smoke and fires on the horizon tonight.

[@titanuranus]

I hope you didn't step in the boola boola.

[@bradleymorris8875]

AKBuilder762 I don’t laugh at many comments out loud. You got me. That was a good one.

[@TipOfAfrica0010]

Welder found dead after natives discovered his secret..

[@michaelm3691]

Native tribe later found extinct due to inferior welding techniques

[@tommyegoldstein1741]

460 likes 1 reply not including me

[@gabrielmercier794]

I feal like the reason why they dont do that technique is because it take like 30 time longuer then just cut 2 hss and weld it together and roll a plate to weld them

[@gabrielmercier794]

Btw im a welder xd

[@MsSchela]

@@gabrielmercier794 ,👎

[@martinpapp1707]

Super. Dobra myslienka.👌👐👏😀😁😊

[@Pepepollazo420]

Im using headphones and thought someone was welding outside, sound goes crazy, great video.

[@bretdouglas9407]

“Whatever you do out there boys, dont ever mention the profile pipe”.

[@LisaMontgomery79]

I mistakenly did once. Now I am in the witness protection program. Shhhhh....wait,,,,,, I'll be right back someone's at my door.

[@chadgoff4878]

What's a profile pipe? 😉

[@DeadpoolNJ]

First rule of profile pipe, is don't talk about profile pipe

[@chadgoff4878]

I'm surprised u-tube hasn't taken this video down.

[@daylinkakakaway7757]

Ahahaha

[@Nezorro]

Мне понравилась схема расчёта - циркуль - круг - полукруг - Геометрия пригодилась наконец то!

[@КириллМихайлов-у4ж]

Это не геометрия а трубометрия :-)

[@miguelarellano9937]

Yes

[@sagittarius2902]

@@miguelarellano9937 Хуес

[@jjukk1]

да не, тут не геометрия а метод тыка, иначе бы просто циркулем

[@vitaliyivanov8552]

Главное крестик по центру , если туда шуруп вкрутить такого можно нарисовать))

[@GraftingTactick]

Excellent idea 👍👍👌

[@GotVid]

Why is KZbin recommending me this just why

[@Billo-07]

$$$$$

[@kanallousam]

This is a good question

[@TheLastMuffin007]

I was watching videos of russian hardbass and then it told me to watch this. Lol

[@Thomate1375]

yeeah... 5min lost lifetime...

[@teetee8]

I also watched it in Japan now because it was recommended. But this video was interesting.

[@guillermojrboy3292]

I dont know why the algo recommended me this, but I'm not complaining .

[@kobiimpraim4838]

Lol ikr!

[@maxtrevor7638]

Это все хорошие способы, только на любителей. Никто особо не будет заморачиваться по этому поводу

[@bandera6213]

Согласен

[@АрсентийАртимович]

И перфекционистов !!! Я бы заморочился,но только для себя !!!

[@zritel1415]

👍 Молоток! Спасибо за идею!

[@bigbluebuttonman1137]

"Did you ever hear the tragedy of the secret profile pipe?" "No." "I thought not. It's not a story the welders would tell you."

[@Abhinandan_Bang]

I never searched for it. And you didn't too.

[@Tyranitar96DAanimator]

Truth

[@mercuryrreveal4871]

But for some reason it was satisfying to me and I watched it till the end lol

[@WantOxide]

But it has 18 mln views

[@theoneandonly342]

True what is this here? Wow a guy who is working....

[@alexcorl2247]

1: Excellent idea, brilliant. 2: A grinder and paint, makes me the welder I ain't.

[@Hoopty91]

There's two types of fabricators.. Welders, and Grinders! I fall under Grinders, but my welds are for me only..

[@keupondestroy911]

Merci beaucoup pour la vidéo