Secret Profile Pipe! WHY DO WELDERS NOT SPEAK ABOUT IT!

A very useful idea for every man! To the garage or workshop !!
Friends, my name is Sergey! I am the author of the channel HandiCrafts.
On this channel I present everything that I have done with my own hands.
Creative ideas, useful tips !
We turn simple things into unique ones! Subscribe, it will be interesting! #craft #wood #diy

[@handicrafts4029]

Here is a video about the turntable kzbin.info/www/bejne/a5u8emywnbaMrLc

[@Jeus-h3o]

I love it!!

[@tsugumorihoney2288]

главный вопрос: НАХУЯ? не ну если изъебнуться, то пожалуйста, в остальных случаях отрез под 45 и все

[@JatinderSingh-kk1xo]

🔔🔔 Bravo 🔔🔔 🎯 🙏 📣 📣

[@RJChannelCanada]

Which Wheel is this ?

[@ABeans07]

Link takes me to same video

[@joelarvizo]

I read a lot of negative comments here, but for some of us that are part time welders or fabricators, and do not have a full set of tools, only a manual grinder/cuter this is very illustrative. I will definetely build my own working table with this instructions...wish me luck

[@tristanallsop376]

I hope for you sake you do your research and learn how to do it correctly. Even with the limited tools available he did the job incorrectly.

[@the__dark_king]

This table is kind of gimmicky. I would never advise someone to build something like this. Better have a solid metal table. Then you add a hard rubber or thick plywood on top when needed. And you dont need the plywood or hard rubber to cover the whole table, just half will do. And basically it's only use is to dampen the sound.

[@АлександрСтепанов-к7ы]

@@the__dark_king Согласен, такой стол - излишество, но человек сделал для себя, для удобства.

[@the__dark_king]

@@АлександрСтепанов-к7ы Sorry. I didn't understand. Can you translate please?

[@ernestandrews7311]

I never knock anyone for showing a video that may help another individual. Thank all of you. So very much.

[@clarkeugene5727]

You are a true Gentleman! Honor & respect to you too.

[@constantinradulescu3842]

Domnule

[@Krishankumar-rq9ry]

@@clarkeugene5727 C

[@m.j.9627]

Sergey, you are doing some fine things here. Many of the little geometric tricks that you perform in this video are impressive, but not too cost effective for those of us who must work for a living.

[@general5104]

THANKS FOR POSTING One thing, though..., turn your voltage and wire speed down and you can run a continuous bead instead of tacks, so when you grind it smooth, you're not grinding all your strength away. I'm not trolling...just helping the fellow out. Adjust your power till your bead sounds like frying bacon. If it's too jumpy, cut your wire speed back a tad. You need a closer wire stick out, for thinner metal and if you have a thick metal and a thin metal, throw most if your heat onto the thicker metal and wash back onto your thinner. Use an elongated cursive e pattern as you move. When you get to the end of your run, double back on itself before you stop. That wat you wont blow a hole in your edge. You'll see a BIG difference.

[@bubba7531]

Thank you for taking the time to show others skills they are trying to learn on their own.

[@greaseman101]

Sometimes it not about if there are better/faster ways. It’s about the outcome. Having the knowledge how to do things different ways with the same outcome, make people like this guy very valuable. ...."in my humble opinion"

[@rafaelgonzales1892]

,, muy bien Bueno muchísimas gracias por mostrarnos tan linda experiencia que nos servirá mucho a nosotros

[@MarceloRSilva-lt3qe]

My friend, you are the best! Receive my thanks for your valuable teachings and a sincere hug from this humble apprentice, from Brazil.

[@CountRus]

Great video, Sergey. And yes, it is cost-effective. Difference is for those of us who were schooled in "Eastern" Europe, the technician is taught to perform numerous tasks. Welding, grinding, cutting, shaping... All of this is part of the curriculum. And of course, drawing and measuring.

[@alexsocolinsky9338]

Серый, ты красавчик. Так держать. Продвигай знания в массы. Профессионалы вымирают, если не делятся секретами. Скажи спасибо своим учителям. Тебе хороших работ. На балбесов , что ставят дизлайки не обращай внимание. Ущербные...им до тебя еще расти и расти, не уменьем так душой.

[@vicron1380]

Ну вот, теперь я точно знаю, что все эти способы были оказывается Секретом. А я то наивный думал, что их знают почти все кто работает с металлом. ;)) Стол, кстати прикольный. Только немного не доделанный. Сторона с металлическим листом понятно для чего, а на обратную сторону нужно лист толстой фанеры прикрутить. Что бы закрывала профиль внутреннего стола. Для столярных и прочих работ. Тогда стол можно считать годным.

[@johnnyguardadoguardado1256]

Gracias por compartir tu tiempo y tu conocimiento es de gran ayuda para nosotros los soldadores Saludos desde Nicaragua Johnny Guardado. Felicidades

[@alexandrneizvestnij1156]

Потому что, это более трудоёмкий способ получения неразъёмного соединения. Так можно сварить для себя. В производстве это экономически не выгодно.

[@ВикторАлфёров-щ5б]

Совершенно верно, можно себе четыре столба сделать с такими шишаками, а попробуй на заказ для забора, допустим, штук тридцать. За работу такую возливую денег захочешь, а выхлоп слабенький будет.

[@finzdrav8646]

Гууууд👍

[@garymucher9590]

Finally a video of useful ideas. So many make useless things and claim they are great ideas. Your video actually is a great idea video. Thumbs Up!

[@DigitalAgeInstitute]

Thanks a lot for your great welding video ! Very inspiring indeed. Thanks for sharing !!!

[@fabricioandres]

Una belleza de trabajo!!! 💖 Y en un video paso a paso y sin blablablá! Imágenes claras, precisas y concisas 💪🙄💖 Hermoso! Muchas gracias!! Like, suscrito y share por Dios!!

[@guillermobonilla8270]

Esto es a lo yo llamo un soldador detallista y con estilo profesional. Saludos desde Panamá 👍🇵🇦

[@stereofiction]

esto es una estupidez de una persona que no sabe lo que hace... nada mas... todo lo que hace NO es EFICIENTE y en cualquier empresa PROFESIONAL no le emplearian!

[@JohnDoe-gv9jv]

I'm not a welder. I use to cut the steel on the Radiack saw and I did the grinding to remove the weld slag for the welders. You do good work. Impressive. Quality work. I can tell you are a really good welder.= that takes pride in his work.

[@douglasbattjes3991]

Nice table Sergey, great job.

[@АнтонШведов-э9я]

верстак зачетный, решение со столешницей, благодарю за идею, привет из СИБИРИ

[@НиколайИванов-р7п3щ]

Полезные действия с профильной трубой и классный верстачок.

[@ДанилаМастерЛомастер]

верстачок забавный, спору нет, но честно, я не придумал, для чего бы мне понадобился стол с двойной поверхностью. как верстак для сварки - пойдет, лишь бы ровный был, а вот для дерева сомнительно, мне не нравится щель по периметру, в нее будет легко улетать мелкий инструмент и детали. плохо, что конструкция не предусматривает разборки. петли, возможно, придется обслужить. хотя бы элементарно горелую смазку после приваривания поменять

[@josealexandrbjomelara2232]

Mis respetos , un profecional, si que se aprwnde viendo personas que saben su oficio , felicidades y gracias ppr compartir su conocimiento. Exelente mesa de trabajo.

[@АзаматМ-к2к]

Молодец красавчик руки золотые ⚒🔧🔨⚒⛏👍✋

[@cesarmujica5265]

Fabricador y Soldador . Son personas altamente capacitados para dar un curso a distancia. La práctica hacé al espero. Ese es mi punto de visión. Felicitó a este joven que uso sus herramientas para darnos su conocimiento en herrería y más. atte César Rafael Venezuela

[@queroseryoutuber2366]

Muito boa ideia para uma bancada de trabalho! Está de parabéns!

[@rajajoshi184]

Yiyyy7yyytioAp a

[@everythingnirvana2690]

Magnificent work, creativity at its best. Could you please make a list of your garage tools and equipments in the description?

[@dan-operator2396]

Наконец-то секрет профильной трубы раскрыт! Больше сварщики не смогут его скрывать!!! 😂😂😂

[@Пользователь-х2в]

Колёса к столу приварил. Когда эти хлипкие колёсики накроются, придётся срезать. И зачем там вообще колёса? Ловить сто безконечно.

[@armandoboensel593]

I'm just learning to weld, I think this is a perfect welding table. Thanks for the great idea. 👍

[@crstianarr5609]

Espectacular tu mesa de trabajo. Avía imaginado una así, también

[@ideafija]

la estoy haciendo y está quedando como de 100 kilos jaja

[@bossrogerofficial2571]

This video tutorials it helps my skill in welding more ticniques ,thanx for sharing

[@davidjanssens870]

Merci ! Beaucoup d'idées intéressantes pour un futur soudeur en herbe....

[@FQ20]

Wuiuui un fr

[@mehdirachidi3489]

kzbin.info/www/bejne/eXSVcmx3iMt4gLc

[@paulpouvreau1209]

ia ora na Sergey, excellent travail - professionnel jusqu'au bout des ongles.

[@linartecompmarcenaria2438]

Parabéns.. bom trabalho ! Congratulations.. good job !

[@AntonioPerez-wm6sh]

Los "Herreros, Carpinteros Metálicos" no debemos ser Egoístas, tenemos que enseñar nuestros "secretos" a quienes quieran aprender tanto como nosotros También aprendimos porque nos Enseñaron. Gracias, excelente Video, Salud y Bendiciones desde Venezuela...!

[@madetowin1612]

Смотрел бы и смотрел, никогда бы не подумал, что под музыку, без визга болгарки, так залипательно смотриться 🤣 очень классное видео. 👍👍👍Ну и полезное, да

[@varnavskynv]

Полезного около нуля, столько геморроя и потерянного времени. На бумаге или картоне делаешь шаблоны, выкройки и работаешь. Как говорил мой учитель: те кто не умеет варить, работают болгаркой.

[@alexandrmorozov8837]

@@varnavskynv когда твой учитель тебе это говорил, на весь завод было четыре болгарки, и те пневмат( не ори про зачистные машинки)

[@varnavskynv]

@@alexandrmorozov8837 это не отменяет того, что Сварка это не прихватить, прислать, а хороший, качественный, красивый шов, в зачистке не нуждается. Сам по себе искусство.

[@toufeekkhan4247]

@@alexandrmorozov8837 gfdryuffh😭😭😭gdjjjjvv

[@togodbetheglory9725]

Lots of welders people does it because they have to..but this guy is doing it because he loves it 👌

[@tanataotengahere5978]

Every Tradesmen got there OWN WAY OF FABRICATING WORK ETHICS - No-one is perfect-no, NO-ONE IS- AWESOME VIDEO - KIA ORA

[@roystonsixtus]

Awesome brother you are a true Steel Man a great skill thanks for sharing 👍👍👍👍🙏

[@fr3shfive990]

There are better ways of doing these by far. And I get a chuckle every time one of these roll across my feed. I can't help but think "A grinder and paint will make me the welder I ain't"

[@markusjohansson159]

They suck at welding.

[@MrAjjordan]

@@markusjohansson159 And evidently finishing.

[@GoodCreativeIdeaDmkt]

very good

[@nuclearexplosion5841]

Why tf did you cut 45s on the first one and not just put them together it would have been so much easier

[@NoTaboos]

Also would have kept uniform cross-section, not pinched.

[@ericharris893]

nuclear explosion you could cut the 45•s and then use them on the inside corner for superior strength. Otherwise I could bang em together quick like you said

[@Tuanconhat]

Cảm ơn bạn đã chia sẻ rất hay mình ủng hộ bạn

[@aldomsantos1972]

Boas dicas em diversos segmentos!

[@luismeza2347]

Amigo muchas felicidades, que bien todos sus trabajos, son de mucha motivación, un saludo desde Sincelejo Sucre en COLOMBIA

[@carlblaser3320]

Cutting out two triangles and bending it to fit would've been faster

[@jms_wttrs9228]

Not that I have the tools or the money to buy them - I do enjoy the videos. Thanks and keep them going.

[@Jport90]

Had to fast forward during the welding parts. I was unsure if I should wear a mask as well to protect my eyes.

[@forgiaro]

Complimenti bella idea del banco da lavoro 👏👏

[@gretahovland6729]

This video made me wish there was a playback speed higher than 2

[@MegaLancet]

Haha 🤣so I was right to make it 2x immediately

[@touhidmahmud]

Me too!

[@faheembaig4475]

Car bumper

[@EOTG_AK]

@@MegaLancet agreed, at least 2x improved the music...

[@naderwasfi9088]

Excellent he make it easy for people well done

[@timhayes3336]

one day this bloke might even learn how to weld lol

[@aussiefarquit125]

Rough aye

[@kylealgie9101]

Lol...

[@tomt9543]

I’m thinking that, where ever he’s from, you’re considered a welder as long as you use a claw hammer to do your metalwork.

[@benitogarcia2385]

Bonito Trabajo, gracias por compartir... Saludos desde la sierra norte de Veracruz, Mexico...

[@valdenormagalhaes9112]

Parabéns! Excelente profissional

[@Richard-nb4iv]

I like that work bench!

[@clarkeugene5727]

did it have locking wheels?

[@samuelbarrow5502]

Honestly at this point I’d just take some sheet metal and make 2 cuts and weld it. That’s if I ever needed to weld a cap at the end of square tubing.

[@MtnBadger]

Ya, but if you're making a finished, designer-type piece, good info to have. Besides, he's just showing aays to work with square tubing. Which is good. :)

[@Vasyl_Cherlinka]

It's a GREAT JOB, COMMANDER!!!

[@YoutubeSupportServices]

LMAO!... *DISCLAIMER: NO WELDERS WERE HARMED OR QUERIED IN THE MAKING OF THIS BAKED POTATO....

[@ВикторАлфёров-щ5б]

Отличный вертун получился! Надо себе подобный забацать.👍

[@Tahn0]

Ok. I'm a welder. I don't have much time, so I'm just gonna teach you how to weld this secr...

[@stevenjennings8347]

Awesome informational educational video experience Y'alls God Bless Ya 🙏

[@Mrjoelaguirre]

this is very useful idea, and we can use it in our everyday life. Good job!

[@hrvojewaldenstein4909]

Amazing idea!! Revolutionary cool!

[@andersonrodriguesdopilar7310]

Magnífico trabalho amigão!!!!

[@joevictor6815]

Excellent craftsmanship. 👍

[@general5104]

I THANK YOU for sharing this KEWL Work-Bench/Welding Table! I gotta make one-o-Dees! Give that man a C-Gar!!!

[@applejacks8160]

I feel like your comment is a secret code

[@nameofthegame9664]

Apple Jacks or a stroke

[@ocoteco9549]

Gracias amigo, Díos té bendiga,un saludo desde la ciudad de México

[@grajdanin_igrek]

Вот времена...... Обман, и главное креативно... Ещё в название надо было добавить DIY, и "жена увидела...." Печаль..... в настройках ставлю "никогда не предлагать видео с этого канала".

[@БиллКлептоман]

НУ НЕ НАРКОМАНИТ ЖЕ РЕБЕНОК И В РОТ ВСЯКУЮ ГАДОСТЬ НЕ ТАЩИТ УЖЕ ХОРОШО ЕСЛИ БЫ Я УМЕЛ Я БЫ ТОЖЕ ЕГО В БАН ВЕЧНЫЙ ЗАСУНУЛ

[@constantinradulescu3842]

What nu puteai sa scri in romana

[@shopofmasters4371]

Поддерживаю. А про какие настройки идёт речь?

[@grajdanin_igrek]

@@shopofmasters4371 Когда ютуб предлагает видео, сбоку картинки жмакаем, вываливается меню, жмакаем никогда не рекомендовать с этого канала.

[@shopofmasters4371]

@@grajdanin_igrek благодарю, буду применять. А то алгоритмы - такие алгоритмы

[@maiklkf7142]

very beautiful video well done I recorded thanks

[@kingfaded4190]

First of all it takes to long. Second there way easier ways to it.

[@FranciscoGonzalez-ro7ht]

Well show your "easier ways" I wanna learn from the best.

[@MannPropertyServices]

Franco Glez he is right this is pretty useless if you ever welded

[@destroyer-fr4dz]

@@FranciscoGonzalez-ro7ht easier way? Take 2 bars, cut one at an angle, then weld. Done.

[@FranciscoGonzalez-ro7ht]

@@destroyer-fr4dz got it, thank you.

[@bob85099]

So where's your KZbin channel...??

[@henryecheverria239]

Gracias felicitaciones y siempre adelante

[@felixx2381]

That’s so much extra work lol

[@aliyavari6263]

It’s good for KZbin, I don’t think any welder do that even in lockdown when they have plenty of times 😁

[@turbowank16v]

Mmmmmmm it's tidy looking but.

[@fazer600full]

Excelente idea de la mesa!!! Genial.

[@ShabanSabra1]

Gooooooooooood

[@RajeshRajesh-sx5pe]

@@tehnikmesin ,çcccccccccççccc

[@albertodortahernandez8888]

Muy bien

[@ianhindley5173]

Crap

[@highclass3041]

Muey BIEN Shitte!

[@philipstiffler8731]

Good Job!!! Enjoyed the video!! Didn't have to put up with long-winded, meaningless talking, the guy just worked!! In process of building a welding table and just changed my plan to a turntable!!

[@joshschow5848]

I watch a few of this guys videos. Interesting. But I got say I think he need to get a new pair of gloves. 😂

[@iwilfix9407]

They look broke in just right to me lol

[@ЛехаПопов-и6ф]

Гениально! Постараюсь исполнить 👍

[@vinceburling4613]

good welders dont grind off welds

[@nexus5033]

depends on the job, some will have you grind it flush

[@christownsend2399]

This is true, but in my job all my welds have to be ground and polished flat, having said that I still endeavour to make all my runs as perfect as possible!

[@nexus5033]

@@christownsend2399 agreed, hurts grinding away some perfect times though

[@christownsend2399]

@exodia Totally agree mate 👍🏻

[@keithsage7258]

Great welders don't need to grind carbide welds ether..TIG welding on my bench too..

[@claudiooliveiraoficial]

Boa noite meu amigo Parabéns show de bola tmj 🙏

[@Ysgammerbr]

Eu: Hoje eu durmo cedo. KZbin: não, vc vai assistir como cortar barras de ferro.

[@douglaspaiva8841]

kkkk

[@123456789046650]

Svaka čast, ovo vredi zlata.

[@beginningoftheend7519]

The reason welders don’t speak about it or because it’s too complicated there’s easier ways of doin this

[@river_of_styx5565]

i mean, did you see how little penetration his welders get

[@damonalagich4524]

someone that doesn't use a cold cut off saw, isn't going to know much are they? :P

[@river_of_styx5565]

@@damonalagich4524 fair

[@SimonElenor]

Amen to that!

[@whereforartthou]

Yeah, Im a fabricator and have done alot of ornamental work over the years and this is wayyyyy to much work to get the same result. Time is money so doing all these cool pie cuts and bending and stuff to get a simple angle is pointless.

[@sasamihalik]

Great Music in those videos !!

[@salvadororona5087]

Can you do this with round pipes?

[@ericharris893]

Yes but you would need a mitre saw not an angle grinder. I mean an angle grinder can work but you wouldn’t be straight on you would have to square the angles and fill gaps

[@nameofthegame9664]

Why on earth would ever want to do this to any pipe?

[@williamwinder3466]

@@ericharris893 They make a jig for cutting round stock properly so that their are no gaps

[@ayocosmosjupiter7952]

una mesa de trabajo expectacular !!!!! te felicito !!!

[@SamodelkiKG]

вот ты взял и все секреты наши людям раскрыл, как нам теперь зарабатывать на жизнь?)))

[@gorillius]

First thing , that table is awesome .

[@ykmeikle]

Man who does their layout with a paint pen

[@wolffirewalker9878]

A moron that doesn't know a damn thing about welding ..lmfao😂🤣😂

[@jakewesterfeld5960]

​@@wolffirewalker9878

[@ludgatecircus15]

Madness. You have 10 m views, including me. How many for people who actually weld or have even seen welding? This is due to the fact of quality filming and editing, as well as NOT having a commentary. Good. Quality. Images. That is all people need. Never put commentary over these. The music is perfect. WELL DONE! I am a lawyer in London and have never seen a welding machine in person, but I will know plenty of welding tricks in case I change jobs.

[@vikassm2383]

I'm a welder. Thought I'd learn something new today. Nothing here. Still looking. 😁🤣

[@JohnDoe-xu6ky]

Nice vid and music tho

[@MtnBadger]

So, maybe understand that not everyone watching this video is a fabricator/welder and ARE learning something? Don't like it, can't use it, move on. No need to slam the video. Even us old dogs can learn a thing or two, once in a while. I may not need a combo welding/wooden workbench to save space but.. I did get an idea for making a rotating grill/roaster on a "table" over a fire, old technique, new inspiration. It happens, one in a while. ;)

[@gronegroo9286]

Ça c'est du boulot ! Pro ça veux tout dire. Bravo

[@andreynotov3606]

Ни чего нового, бесполезный стол, ни понятно для каких целей перевертыш, если можно работать за сварочным крепким а не этой болтушкой, единственное удобно мусор сбрасывать

[@rusrus1088]

👍😂

[@Конченый-б4у]

Или с размаху себе бестолковку снести

[@ДулатбекБектуров-з4п]

@@Конченый-б4у неготивщики😛

[@josemina5957]

Buenas técnicas de trabajo los felicito

[@subsgob00m]

Yeah, i'd grind my welds too if they looked like that.

[@lordbelvoir2543]

Was thinking the pigeons had been around

[@MrTitch37]

yeah teflon weld it will stick to f all 🤣🤣

[@ML6103]

I really appreciate you're work my brother, and I don't mean to bring any negativity. But if you turn your amps down and your wire feed speed up, you won't have to constantly stitch weld with the mig. It should be one quick bead as you push away. Best of luck and thanks for making the video 🍻

[@ГенадийКочетов-о8д]

Большой секрет для маленькой такой компании, в которой только автор видео!

[@простокто-то-ш1ъ]

Вот уж точно. С руками у мужика, слов нет, всё более, чем в порядке, но секрет, блин... явно, из арсенала того самого неуловимого Джо из анекдота :(

[@PepperStone3]

As someone who knows nothing about welding, after reading the comments, I guess this guy isn't a welder? Whatever he is I though his craftsmanship was clean and maybe he would be too slow for a company but it looks like this is his own project. I say take all the time you can. I was impressed with the end result.

[@hoenndpn9200]

He isn’t a professional welder from the looks of it, he’s tacking onto the joint, and tacking onto that and then retacking onto that again and then grinding all of it off smooth. It’s purely to look aesthetic and most of these processes will usually have easier ways of doing it.

[@SegoMan]

Welders don't speak of a lot of things as people won't pay extra for them..

[@Trapezozo]

True

[@tomjones4145]

great video / thank you for sharing

[@hugosalcedo9664]

No vi el dobles donde se cortan barios ángulos Como el del fondo de video, al comenzar

[@antonilatino626]

No. Es dobles lo mismo pense es relleno con otra pieza cortada con simetría. Mal servicio es ay donde mejor me retiro