SECRET WAY! How I Remove Crank Pulley bolt that Easy! Part 2 video on the description

  Рет қаралды 1,099,676

JasmineFatherGarage4k

JasmineFatherGarage4k

Күн бұрын

Пікірлер
@japdog9
@japdog9 3 жыл бұрын
i just used it on my LS auto and it worked perfect ,a big thumbs up ,. Thanks
@brianhaley4471
@brianhaley4471 Жыл бұрын
Thanks for making this video! I tried this using the old ac/power steering serpentine belt. It worked like magic. Once I got the loop to catch under the crank damper pulley it did not budge. It saved the day. Excellent.
@jfGarage4k
@jfGarage4k Жыл бұрын
Im glad this video help out. Please share around the video thanks
@peterbamford6081
@peterbamford6081 Жыл бұрын
Thanks man. This technique worked a treat. Those bolts are really tight but using the old belt I was able to lock the pulley and remove it.
@jfGarage4k
@jfGarage4k 10 ай бұрын
Im glad you like it. Thanks for watching
@grahambroadbent7175
@grahambroadbent7175 2 жыл бұрын
I tried impact drivers and big bars, all which did not work. I then tried this belt method, it then came off first time. Could not believe how easy it came off. Thanks for saving my day.
@jfGarage4k
@jfGarage4k 2 жыл бұрын
Awesome work champ. Im glad i can help Please share this video around
@jsun3117
@jsun3117 2 жыл бұрын
An inexpensive big corded Bauer Impact Wrench that you can get for $69 on a deal featuring 1050lbs of breakaway torque would take care of it first time around without having to belt to secure. Why on Earth would you use an impact driver for this job? At best that is suitable for moderate to small bolts.
@RGV2300
@RGV2300 2 жыл бұрын
@@jsun3117 almost 100 usd in my country for a corded impact wrench, that price is doable, altough the greater price.
@jsun3117
@jsun3117 2 жыл бұрын
@@RGV2300 Sometimes a decent branded long handled ratchet or breaker bar can cost even more than the corded impact wrench I described. The thing about an impact wrench is it uses centripetal force to extract the bolt without any reinforcements needed to secure the surrounding moving structure.
@jsun3117
@jsun3117 2 жыл бұрын
@@RGV2300 The best approach for this job is an impact wrench paired with a mass impact socket that transfers more efficient force from the wrench.
@diycaveman2166
@diycaveman2166 2 жыл бұрын
I do a similar thing with a ratchet strap around the balancer and hook to the frame. Works exactly the same except no risk of ruining your a/c or what ever pulley is closest
@diycaveman2166
@diycaveman2166 2 жыл бұрын
Ill make a video and post it when I do my next one
@viviajones6388
@viviajones6388 Жыл бұрын
I'm trying this 🙆🏼👍🏽 I've been trying to get my 2003 Chevy Impala balancer bolt to install a crank sensor 🙆🏼🤔🧐
@spinnox1
@spinnox1 Ай бұрын
I just used this trick while changing the timing belts, that bolt was a PAIN to remove, and thanks to this it finally came out. I know the video is 3 years old, but it's GOLD. Many thanks mate.
@jfGarage4k
@jfGarage4k Ай бұрын
Awesome this video gives the world a good vibe helping other people
@raulmartinez-sf2ii
@raulmartinez-sf2ii Жыл бұрын
Always happy to learn new ways. Thanks for sharing.
@tristandupre6294
@tristandupre6294 2 жыл бұрын
this technique is amazing! I was contemplating whether I should crank the motor, but that would require assembling quite a bit of stuff.
@robertarthurs328
@robertarthurs328 Жыл бұрын
A good battery connection
@Dolliehomee
@Dolliehomee Жыл бұрын
I crank the engine to loosen the bolt is that why now I'm getting a code n a battery low voltage n engine ecu melfuntion? I can still start n drive my 08 TLS but now theres that code n warning light!!! Any ideas to solve this.
@carlt6932
@carlt6932 2 жыл бұрын
I've been doing it this way for about 25 years. Just use an old belt. I always put a mark across the pulley with a paint marker incase the rubber bonding slips. It never has.
@Mr7352
@Mr7352 2 жыл бұрын
I tried this method with the old pulley belt and it actually allowed me to use a breaker bar and finally get the bolt loose, what a relief.Thank you
@franknavarro1913
@franknavarro1913 2 жыл бұрын
Tank you what a good idea I did it, after trying every different method
@WATT698
@WATT698 3 жыл бұрын
This was spot on. Thanks man!! You're a lifesaver!!!!
@jfGarage4k
@jfGarage4k 3 жыл бұрын
Thanks im glad to help.. Please subscribe and share my video
@ayedhatyaygo983
@ayedhatyaygo983 Жыл бұрын
Finally a video without a freaking air tool being used thanks.
@jfGarage4k
@jfGarage4k Жыл бұрын
Glad you liked it!
@estebanjuarez8707
@estebanjuarez8707 3 жыл бұрын
I ll try this next time looks easy an fast
@dagamer667
@dagamer667 2 жыл бұрын
I did my 03 Impala 3.4L this morning. In my case, the balancer hub has three spokes vs solid design. I was able to put a thick flathead screwdriver against a spoke, and braced the handle against a spot on the lower control arm. Then the breaker bar made a short work of it.
@phillipmartin5732
@phillipmartin5732 8 ай бұрын
Totally worked!!! Used a breaker bar from above.
@edwingaupp7838
@edwingaupp7838 Жыл бұрын
Let they guy you learned this from is a genious. After fighting this after impact didnt work. I put pullys back on rigged the serp. Belt and it came off with breaker bar almost no effort. Thx.
@jacobuskai4594
@jacobuskai4594 2 жыл бұрын
Thanks, I tried it and it worked!
@Xpp.
@Xpp. 2 жыл бұрын
Great idea for when you dont have the right tools to hold the pulley ! Next time i find that situation i’ll give it a go !!
@Felipebustamante510
@Felipebustamante510 3 жыл бұрын
Good,is always good to check for good ideas,my question was answered.Gracias amigo.
@omarcarrilloromero8034
@omarcarrilloromero8034 2 жыл бұрын
I literally just did this and it worked! You just pulled a Geico and saved me a bunch of money in 15mina or less
@docjody8624
@docjody8624 Жыл бұрын
Brilliant! Thank you. Saved $xx or $xxx not having to buy an Impact Wrench. Watching your genius video AND getting the Crank Bolt off took less than 21-min. (TIP: Helped beforehand to apply PB-Blaster to bolt and its washer interface several iterations before attempting to break-free my 19-mm mongo guy.)
@RBZ06LT6
@RBZ06LT6 Жыл бұрын
You should still buy an impact wrench tho. 1000 lb ft busting torque.
@GUESSWHAT013
@GUESSWHAT013 3 жыл бұрын
Thank you so much man! I worked! I was worried about not getting it off with a impact, but your methode worked!
@jfGarage4k
@jfGarage4k 3 жыл бұрын
Thanks for the good feed back bro, im glad this help you out. Make sure to share and subscribe my channel, have a great day champ
@GUESSWHAT013
@GUESSWHAT013 3 жыл бұрын
@@jfGarage4k i subscribed right away! Keep the vids comming bro🤙🏼
@Shiva-ld6bw
@Shiva-ld6bw 2 жыл бұрын
That's a lot of force on the AC compressor. Be careful when doing this, expensive parts at risk!
@dannylinc6247
@dannylinc6247 2 жыл бұрын
It's on the free running pulley and pulley bearing. The ac clutch is not engaging the shaft plate. No harm done.
@manglermalachi
@manglermalachi 2 жыл бұрын
Thank you for sharing this valuable tip. Please continue!
@jfGarage4k
@jfGarage4k 2 жыл бұрын
Your welcome. Please share the videos and subscribe
@pedrotalavera3541
@pedrotalavera3541 2 жыл бұрын
Great idea. Thanks for sharing
@datwinz3927
@datwinz3927 2 жыл бұрын
If your engine don’t have a key way on the crank DONT flick Starter motor to take bolt off! Have done it before and the pistons hit the valves! Unless you have a NON interference engine DO NOT remove by starter motor and breaker bar you WILL do damage but that’s just my thoughts on it you guys can do what you like :)
@pedromanuelmadeiramartins6188
@pedromanuelmadeiramartins6188 Жыл бұрын
that is the question mark... we need to know if engine don't have a crank key!
@baohoainguyen
@baohoainguyen Жыл бұрын
Thanks, that's good to know. I guess without a key, the pulley becomes loose and the crank turns without turning the pulley and timing belt/camshaft, causing the pistons to hit the valves.
@datwinz3927
@datwinz3927 Жыл бұрын
@@baohoainguyen yep all that is NEEDED is a flywheel locking tool that you can buy for £20 and save your engine and yourself all the stress and do it the right way 🙌🏼💪🏽
@martindelaconcha2300
@martindelaconcha2300 2 жыл бұрын
I did give it a try we did impact gun And work perfectly thank you for the tip great video
@leelyons3443
@leelyons3443 3 жыл бұрын
Simplicity ,I hope , going to try this method on my rattling ford transit ,it has 3 pulley bolts ! Cheers man from Uk
@jfGarage4k
@jfGarage4k 3 жыл бұрын
LOVE IT.. Good luck champ
@guillermonunez6114
@guillermonunez6114 Жыл бұрын
Best video ever came in clutch 💯
@madmaximus5498
@madmaximus5498 3 жыл бұрын
Thanks man, it's really helpfull for me
@miguelcarbajal2198
@miguelcarbajal2198 10 ай бұрын
Bro you’re smart. Nice trick 👍
@jfGarage4k
@jfGarage4k 10 ай бұрын
Thanks for the like
@jessielomibao9917
@jessielomibao9917 2 жыл бұрын
New subscriber here very helpful and informative thanks bro
@jfGarage4k
@jfGarage4k 2 жыл бұрын
Thank you for the support 🙏.. You can share this video around to help other people
@benjaminseaman8089
@benjaminseaman8089 2 жыл бұрын
THANK YOU!! I had to get creative. My belt was to short. I rapped the pulley then had to put a pipe through it and brace it below the engine and subframe.
@josearellano3268
@josearellano3268 2 жыл бұрын
😮 learn something new today. Removing Ford Fiesta balancer bolt. Worked nice.
@edgarvigil7170
@edgarvigil7170 3 жыл бұрын
thanks for this video. the best way to do it that i saw. 👏🏼👏🏼👏🏼
@jfGarage4k
@jfGarage4k 3 жыл бұрын
Hey your welcome im glad i can help.. Please share the video around 🙏 and subscribe thank you
@edwardr302
@edwardr302 3 жыл бұрын
Hey bro si funciona yo esta batallando con una 2008 Chrysler town and country 3.8 use la belt y le hise como dijistes pero todavia me quedava mucho banda y la segui lleve asta el alternador esta que esta media apretada y " BINGO" GRASIAS HERMANO. LO RECOMIENDO
@mr.hoonigan7978
@mr.hoonigan7978 11 ай бұрын
Great idea 👍 You help for me. Big like and thanks ;)
@jfGarage4k
@jfGarage4k 11 ай бұрын
Thanks for watching. Share & Subscribe
@Speed00007
@Speed00007 3 жыл бұрын
Not a bad trick. If I ever don't have my Milwaukee 2767 high torque gun with the Lisle 19mm socket I might try this. I'm not trying to be funny or cocky. I know that I am blessed to have access to powerful modern tools. I thank god everyday and thank you for posting this technique.
@ali.alduwal
@ali.alduwal 3 жыл бұрын
A very good method, thank you alot 👍
@jfGarage4k
@jfGarage4k 3 жыл бұрын
Your welcome bro. Make sure to share the videos around and subscribe 🙏🙏
@michaelalonzi8325
@michaelalonzi8325 2 жыл бұрын
I just did this and it worked!!!!!
@distruptivesuburbia2081
@distruptivesuburbia2081 Жыл бұрын
This video totally saved my ass. I ended up having to use the belt that came with the car but it did not appear to damage the belt. I was able to hook the exvess over the water neck. I suppose I could’ve laid a 2 x 4 across the top of the car and looped the excess over that but it worked just fine
@jfGarage4k
@jfGarage4k Жыл бұрын
Glad this video help you out
@anthonyramsumair4815
@anthonyramsumair4815 2 жыл бұрын
Brillant Idea, love it
@jacobs7281
@jacobs7281 11 ай бұрын
thanks for this belt tip video, while taking crank shaft pulley bolt from my 2012 ford escape v6, The shaft rotated reverse at least one full cycle since the belt was not tight , is there any timing issues will happen because of this?
@jfGarage4k
@jfGarage4k 10 ай бұрын
Make sure the pulley and belt are clean and dry, No oil, mud or dirt in it. After wrapping the belt around the pulley make sure its tight around no slack at all. Good luck
@RogerM88
@RogerM88 Жыл бұрын
Thanks! Helped me a lot.
@Ghostacc956
@Ghostacc956 2 жыл бұрын
Hmmm ok I’m going to try this when I get home, I will be back later to provide feed back thanks.
@Ghostacc956
@Ghostacc956 2 жыл бұрын
Unfortunately this method did not work for me. My cars serpentine belt is like 4ft long. I tried a few different times and couldn’t make it work. As a last resort I used the more popular not so safe method haha. I set a breaker bar through the frame and set it against the ground and cranked the car a few times and it came right off. Car is back running now. Thanks for this idea anyways. Maybe I’ll be able to use it on a different car.
@mikebeddingfield2144
@mikebeddingfield2144 Жыл бұрын
Get a strap wrench! It's a handy tool to add to your tool box! And a chain wrench is also nice to have when you need a bit more powerful hold
@nabeelgalal3238
@nabeelgalal3238 2 жыл бұрын
Thank you so much, saved my life
@jfGarage4k
@jfGarage4k 2 жыл бұрын
Your welcome im glad i can help
@annuarrashid3314
@annuarrashid3314 3 жыл бұрын
1 hour with impact gun...try this method take 10min and it really work...tqvm bro
@timothytomten9843
@timothytomten9843 2 жыл бұрын
weighted socket on the impact .5 seconds
@mantselarry7287
@mantselarry7287 10 ай бұрын
great video ❤❤❤,works %1000
@roberxl
@roberxl 11 ай бұрын
Great hack lm gona try it, need to take hb out to change the crank sensor
@azarahwagner2749
@azarahwagner2749 2 жыл бұрын
You need a pulley wrench to stop it from rotating or you risk damage !!! And your torque wrench is too small . Most crank pulley bolts are torqued very high like almost 200 lbs so a dinky wrench won’t work. Your crankshaft is leaking oil already which is a sign of damage to shaft and woodruff key and damage to your worn out timing chain and gears ⚙️ AND NEVER REUSE THE BOLT !!! You need a new one since it is a “ torque to yield “ one time use only . It’s under $10 .
@bluckq
@bluckq Жыл бұрын
Not all crankshaft pulley bolts are torque to yield bolts
@JOSEADIAZ-zo6zv
@JOSEADIAZ-zo6zv 3 жыл бұрын
The best trick i ever saw to remove this bolt. I used it and really work.
@jfGarage4k
@jfGarage4k 3 жыл бұрын
Awesome.. see it work really good
@johnmorris1764
@johnmorris1764 3 жыл бұрын
Great tip, thanks.
@roberts4208
@roberts4208 2 жыл бұрын
Ayyy thank you brudaaa ,godd blesss you saved me hehe 💪💪💪
@False_Death
@False_Death 2 жыл бұрын
That is genius! Thank you!
@rubenproost2552
@rubenproost2552 Жыл бұрын
Cool! I was nervous to bump the starter, as my car has a start button.
@troy78552
@troy78552 2 жыл бұрын
Thanks for the video , I have a important question ? How do you troubleshoot a crankshaft pulley that is not aligned with all pulleys on a 2014 Honda Civic ex 1.8
@jfGarage4k
@jfGarage4k 2 жыл бұрын
Take out the belt and wiggle the crank pulley, make sure no play around. Check the crankshaft bolt make sure its installed tight
@troy78552
@troy78552 2 жыл бұрын
@@jfGarage4k I did check belt off n its like back ⅛ or ¼" it needs to come forward ¼ or ⅛ " all pulleys alginate except crankshaft pulley n it's not loose or play its still
@honduh9348
@honduh9348 3 жыл бұрын
If your motor spins clockwise its a million times easier to just bump your starter with a breaker bar wedged up against something solid. Let the engine do the work for you. Lol
@dannylinc6247
@dannylinc6247 2 жыл бұрын
Sometimes even a 3foot breaker bar won't do anything but dent the car and I've seen a Mac tools socket get split. This idea isolated and held it firm. He just wrenched it loose. Thumbs up. There's much discussion about needing more expensive impact wrenches and heavier mass Snap-On sockets. With this method, you can solve it faster and cheaply. You just need a belt most people throw away. One mans junk is ...... It's not that tight on most engines, but once in a while you run across one that won't break loose. Some, like this one, you can't use the tried and true methods. This is a simple ingenious solution.
@inekic
@inekic 2 жыл бұрын
That's not easy with newer cars with a "start engine" button.
@dannylinc6247
@dannylinc6247 2 жыл бұрын
@@inekic also, transverse, That would put my long breaker up by the headlight area on many vehicles. I had a 20R in a pickup that tapping the key should break it free. It broke the socket. With a method similar to this I could likely have just wrenched it loose. I had the people come get the vehicle. I wasn't feeling that well after trying to help them.
@garybrown5500
@garybrown5500 2 жыл бұрын
Don’t try this unless you know the pulley is keyed or you will have a head full of bent valves! (Ford Z tec Renaults etc)
@peggywiggins6152
@peggywiggins6152 2 жыл бұрын
So you saying you're way is easier . I'm lost but learning
@madibakorobo625
@madibakorobo625 2 жыл бұрын
Just 2days ago used the belt to remove the bolt on the harmonic balancer. Good technique and thank you (PNG)
@BayLuv87
@BayLuv87 3 жыл бұрын
Thanks for sharing what you learned
@fiskfarm
@fiskfarm 2 жыл бұрын
A proper 1/2" impact wrench does this in about 1/2 second (battery or pneumatic). A 1/4" impact doesn't stand a chance and is a waste of time on a bolt that size. I guess judging which tool to use comes with experience. 👍😎👌
@lkytmryan
@lkytmryan 2 жыл бұрын
I tried a 1/2" electric impact wrench for several minutes on a Honda Accord and it didn't budge. I bent a 3/4" breaker bar like a pretzel on the same nut with an 8' iron pipe for leverage.
@fiskfarm
@fiskfarm 2 жыл бұрын
@@lkytmryan I haven't found a single electric that holds a candle to an air impact. Not sure why. So what finally worked? Btw I have a Dewalt and a Milwaukie electric. Great for lug nuts but never a crank bolt. Air👍
@lkytmryan
@lkytmryan 2 жыл бұрын
@@fiskfarm I gave up and took it to Honda and paid them $35 to use their air impact gun to break the nut for me. :)
@fiskfarm
@fiskfarm 2 жыл бұрын
@@lkytmryan btw my 1/2" pneumatic impact wouldn't touch the outer nut on my Cummins Ram front axle so I pu an HF 3/4" impact for around $70 and it worked in about 1/4 second. Can't beat a larger hammer and basically that's what is in an impact wrench. A little 1/4" like he was using is worthless on something like this.
@fiskfarm
@fiskfarm 2 жыл бұрын
@@lkytmryan good move. Getting all set up for air tools can get rather expensive if you don't need it as often as I do. I use it daily but my Sears compressor has been on line powered up for an amazing 45 years now. I replaced one reed valve 40+ years ago and changed the oil at least once and the motor bearings once🤣 They don't make them like anymore unfortunately.
@ImReelySuqi
@ImReelySuqi 7 ай бұрын
Been trying to pull my crank bolt for 2 days with my friends electric impact. It ain't working. Gonna give this a try tomorrow
@royderouin7510
@royderouin7510 2 жыл бұрын
Put a socket and breaker bar on a jack stand 90' to crank bolt , trun key quickly,...check results ..I've used this method many times it works if you set it up correctly
@oepolo6317
@oepolo6317 2 жыл бұрын
DANGER!!
@RAWRMotorsports
@RAWRMotorsports 2 жыл бұрын
I've put 1/2" drive ingersol air impact on them Honda balancers with no luck .. usually have to bust out the 3/4 breaker bar
@TU-TOF
@TU-TOF 2 жыл бұрын
thank you very much
@osaelbarrantes8060
@osaelbarrantes8060 2 жыл бұрын
If it does work, what a blessing. Greetings. from Tiquicia C.R centroamerica.. I gotta give it a shot...
@johng.3740
@johng.3740 Жыл бұрын
I too ran into the "infamous" super-hyper-tight crankshaft bolt on an Acura integra, never did get it off. Has anyone tried a Torque multipler? There are torque multipliers on the market that can output 4275 ft lbs.....truckers use them all the time to take off stuck lugnuts on tires, with little effort. Look up torque multipliers on KZbin and you'll find them boys remove high torque, over tightened, rusted up, stuck lugnuts with minimal effort.
@catcat9346
@catcat9346 2 жыл бұрын
Wow nice job 👍
@davidsnyder9379
@davidsnyder9379 2 жыл бұрын
That amazing
@allenraymond9157
@allenraymond9157 2 жыл бұрын
The even easier way is to use a breaker bar and wedge it to frame or something solid and tap starter but make sure coil packs are disconnected
@jfGarage4k
@jfGarage4k 2 жыл бұрын
But Doing this method On Hondas Engine is a No No No.
@garybrown5500
@garybrown5500 2 жыл бұрын
And the pulley is keyed to crankshaft!
@bluckq
@bluckq Жыл бұрын
A interference engine has a high chance of damage. The starter method only works on non interference engines
@gartheligon140
@gartheligon140 2 жыл бұрын
No more breaker bar from bolt to ground and click the starter. Your way is an easy way to loosen the bolt, and did you do the opposite with the belt to tighten the bolt?.
@BayLuv87
@BayLuv87 3 жыл бұрын
Learned something new..
@royderouin7510
@royderouin7510 2 жыл бұрын
A chain wrench works to but it has to have a long enough chain to go all the way around the pully ,..use old belt to protect pully groves
@garagegrump_6627
@garagegrump_6627 3 жыл бұрын
Smart man 🤠😜
@vikrammalviya7917
@vikrammalviya7917 7 ай бұрын
Sir engine rotation is clokwise or anticlockwise from front side of car
@slxwfox83_93
@slxwfox83_93 Жыл бұрын
Now how do I get it to stay tightened when putting a new bolt in .? I tried using my breaker bar to change my belt and the bolt just twisted over like nothing
@jfGarage4k
@jfGarage4k Жыл бұрын
Check the description below i add couple links how to Install a Crank bolt
@stevecarlson6462
@stevecarlson6462 2 жыл бұрын
What are you working on? Honda?
@jfGarage4k
@jfGarage4k 2 жыл бұрын
No not Honda, this video a Ford Escape
@vanhap
@vanhap Жыл бұрын
If you want maximum torque output from your impact gun, do not use an extension.
@daveramsay8115
@daveramsay8115 3 жыл бұрын
That’s crazy awesome Thank you!!
@nameless-og
@nameless-og 2 жыл бұрын
This is what I used to do long before youtube, lol... 2 points though... don't do this on cranks with a rubber isolater in the middle, sometimes it separates them, though that would make it close to replacement in my book, really... the other thing is DON'T use your ac pulley, use the closest idler pulley. No point in damaging the ac clutch or ps/water pump either.
@madibakorobo625
@madibakorobo625 2 жыл бұрын
Amazing technic just remove the pulley bolt from my nissan murano. Thankyou (PNG)
@jfGarage4k
@jfGarage4k 2 жыл бұрын
Its a Great Idea I love it . Please share & subscribe the channel to support this video
@ismailkoya66
@ismailkoya66 3 жыл бұрын
hey, sorry if this is a dumb question but how many pulleys are present on that side of the car? I have a Ford Figo and the crank pulley broke and it was making a noise when I was driving it so the mechanic removed the small fan belt and now I can drive the car but there's no power steering until I put new pulley. Is it the crank pulley?
@jfGarage4k
@jfGarage4k 3 жыл бұрын
FORD FIGO is that a 1.6 Liter engine? Same as Ford Fiesta (American version)
@jayafooltv2838
@jayafooltv2838 3 жыл бұрын
it does work damn!! lol thanks a lot man
@jfGarage4k
@jfGarage4k 3 жыл бұрын
Thanks. Im glad i can help out, please share around the video
@michaelmascolino4962
@michaelmascolino4962 6 ай бұрын
Well that's all good job what do you do when a pool is still don't come off is Frozen on the crank what do you do in no
@nathancarlisle424
@nathancarlisle424 9 ай бұрын
Thanks it worked great
@jfGarage4k
@jfGarage4k 9 ай бұрын
You're welcome!
@abdelhamidaber9954
@abdelhamidaber9954 3 жыл бұрын
Bon boulot ! un grand merci pour vous , bonne continuation .
@mikimiki195
@mikimiki195 2 жыл бұрын
I Sean someone else on you tube doing this I will try this tomorrow **Update my comment** This worked like charm no issues thanks
@JamesSmith-jq2jc
@JamesSmith-jq2jc 2 жыл бұрын
Nice idea. This could come in handy when at a junk yard and your not bringing all your tools, or you've limited tools to begin with.
@SuperSonicMaster007
@SuperSonicMaster007 2 жыл бұрын
Why would you be taking crank bolts out at the junkyard ? Keep em on
@Sickiey
@Sickiey 2 жыл бұрын
Brilliant trick
@leodo2949
@leodo2949 2 жыл бұрын
they are easy way to do use 1' in impact the one they use for 18 wheel tire change
@fairfax_fran5109
@fairfax_fran5109 Жыл бұрын
Do the tensioner pulley counter clockwise too to losen ?
@wyattamante8299
@wyattamante8299 2 жыл бұрын
Good job.
@VictorLopez-yo8wn
@VictorLopez-yo8wn 3 жыл бұрын
thank you for your video
@jfGarage4k
@jfGarage4k 3 жыл бұрын
Your welcome Champ. Make sure to subscribe and share this video to other people that need help.
@synovium
@synovium 2 жыл бұрын
Will this method work on the honda accord crank bolt?
@jfGarage4k
@jfGarage4k 2 жыл бұрын
Check this video out kzbin.info/www/bejne/n2HcfoGGj7-qp7c
@Mr.wilson949
@Mr.wilson949 2 жыл бұрын
Very good!
@beerbed7551
@beerbed7551 3 жыл бұрын
Good job....
@dandiegidio7729
@dandiegidio7729 Жыл бұрын
I've had to do crank bolts on a few different cars and my crappy corded impact did it no problem.
@MyLifeThai371
@MyLifeThai371 2 жыл бұрын
What vehicle was this on?
@jfGarage4k
@jfGarage4k 2 жыл бұрын
This a ford escape
@frankensteing3534
@frankensteing3534 2 жыл бұрын
Mine is seized on the car tight I tried all of these what’s another way to remove the crank pulley ?
Im Surprised!  I Only Use Good-Old Belt Trick to Remove this Crank Bolt.
4:24
JasmineFatherGarage4k
Рет қаралды 46 М.
Elza love to eat chiken🍗⚡ #dog #pets
00:17
ElzaDog
Рет қаралды 14 МЛН
Easy Crankshaft Pulley Lock Torque/Removal
3:57
HowYouCanDoItToo
Рет қаралды 235 М.
Toyoya avanza | Teknik membuka bolt 🔩  pulley crankshaft.
4:51
How To: Remove Any LS Crank Pulley (In Under 5 Minutes!)
7:38
Coverman66
Рет қаралды 143 М.
Best Hack Ever! How to Remove Harmonic Balancer or Crank Pulley
6:30
BMW M47 / M57 Crankshaft Pulley Removal & Replacement
15:30
George Austers
Рет қаралды 168 М.