SECTION OF SOLID_CYLINDER_Problem 5

[@raziur9099]

I would strongly recommend youtube encouraging people like him for using this platform in a useful way! Cheers sir!

[@himanshushekhardas1730]

sir, you do a lot of hard work towards creation of these videos, i whole heartedly thank you for your help you provide to thousands of engineering students who are either weak in EG or have bad teachers or those who dont pay attention in class. please continue your good work, we are always with you

[@gabrielmmusi5663]

Imagine 3 years later this video solved my problems as a distance learning student without any drawing background. Learning meterial is way too limited. Tutor's don't respond in time whenever i need help.

[@durgaprasaddsvvp851]

I have never ever seen this much professional skills......... What a human being ur... Explaing every thing exceptionally

[@ManasPatnaikofficial]

Thanks for the compliment and my best wishes are witth u always.... Engineering Drawing | Engineering Graphics |: kzbin.info/aero/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS

[@pranityadav416]

i am doing diploma externally and these videos help me alot. Thanks man.

[@ManasPatnaikofficial]

Thanks for appreciating my work Pranit..... Do watch more videos on section of solids... All the best And do encourage and recommend this channel to your friends...

[@kandarpvyas4592]

Sir sometimes I think if u were not making videos I might have failed 😀 Thanks Sir really good work.

[@vathsalmehta3488]

This is true

[@g.kashish2005]

I swear to god this was the best among all the videos of engineering graphics videos on KZbin I've watched till now

[@divyanshsharma8239]

thnxx bro I have exam tomorrow and your videos are helping me a lot

[@jaswanthcrazy1569]

when ever i got a doubt i refer your channel you are doing great work sirji....

[@Riteesh_Kumar]

i'm doing B.tech from IIT Roorkee (1st yr.) and your videos helped me a lot. Thank u sir and keep uploading such videos

[@ManasPatnaikofficial]

Thanks Ritesh for appreciating my work.. All the best and do tell your friends about this channel so that all can benefit...

[@ashwaryakumarsinhanice4737]

Bhi iit me to waise bhi bahut acche teachers honge

[@SHASHIKUMAR-pp4hg]

😂😂sir ham bhi yahi dekh rhe hai,today Ed exam

[@ashwaryakumarsinhanice4737]

@@SHASHIKUMAR-pp4hg exam wale din bhi

[@ashwaryakumarsinhanice4737]

Aaj to mt dekho

[@jaywantpatil7103]

Hi sir ur videos help it out even after 5 Years I got out of marks 60 on 60 because of you🔥

[@shivrajautade5781]

Really Very Nice..

[@funmaster5853]

i am saurav gupta from nit jamshedpur. thank u so much sir.. your video helped me ...

[@ManasPatnaikofficial]

Thanks saurav for appreciating my work... Do encourage your friends also to subscribe and learn from this channel..... All the best in life....

[@Casio-e4p]

I think u r a big fan of rajnikanth.. U used to mention him a lot of times in ur videos..😂😂😂.. btw u r doing a great work.... And don't worry i will recommend this channel to my friends as well.. 😂😂

[@AmanSingh-fq8ti]

Sir your videos are very helpful.... Not only engineering drawing, Engineering mechanics tutorials are also awesome 🙏🙏🙏

[@20thwin]

very good teaching style.....proved to be helpful really!

[@alokp6661]

the best youtube channel for ED in india.

[@ritienmohan2504]

I am Ritien From BITS Pilani (1st year) Even after 4 year years in 2021 it helped me massively Thank You

[@saivishwanath2866]

U have decreased a lot of stress on us,by the way we hve exam today u teached us greater than our daffar sir,tq sir

[@mightywarriorgaming5816]

Sir without u we are nothing

[@shahidfirdous6230]

sir the problem is observing the true size of the given figures ..ok u hv shown in this question how to find that ...but how can we determine it in other questions

[@talkwithtinah8355]

I was about to go yo bed without completing my home work now you helped me thank you

[@harshavardan9076]

First time ever in youTube i got what I wanted. Thanks alot sir ❤😊

[@gabrielmmusi5663]

I been struggling so much. Your videos have really made this easy. Thank you

[@ManasPatnaikofficial]

All the best Gabriel

[@kotipallisrinivasaswamyk1-829]

What an explanation..superb broo.. I don't go to clg regularly now i seen ur drawing videos now iam confident about drawing exam

[@aayupatel28]

I m Aayu Patel from shankaracharya1 bhilai ..(cg) Thank you very much sir.. Your video helped me a lot.. Plse sir keep helping us by uploading such great videos.. Long live *manas* *sir*

[@TheKevin12343]

This video is above excellent. I like the quality work you put in on explaining all this. Liked it very much! You know what are you teaching and not like some teacher who just teach steps on how to solve problem.

[@NK-fl4ox]

Sir can you do a question where the true shape of section is given and we have to find the rest? Like a reverse procedure of these questions?

[@manivannanmuniraj6595]

Bro its really useful for me and It will be also useful others,keep doing this for future engineers & even I am also a be cse 1st yr student,I hve ex.ur vedio develops my imaginary power bro,thnx alot....all the bst

[@rahula2533]

Sir can you tell what software you used for representing 3d view in this video and by the way your videos are awesome

[@arun.k8260]

Solid works

[@mayurigawande5973]

Best channel for EG thanks a lot sir🤗

[@avantikaverma7822]

We architecture students in IIT ROORKEE rely on your videos for architectural graphics. Thanks...

[@ManasPatnaikofficial]

All the best. 1. Engineering Drawing (English) : kzbin.info/aero/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS 2. Engineering Drawing (Hindi) : kzbin.info/aero/PLIhUrsYr8yHx0C3ebAW-FQxTP8ig8-QxU 3. Engineering Mechanics: kzbin.info/aero/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS 4. Mechanics of Solids: kzbin.info/aero/PLIhUrsYr8yHzft7ygw5THZo4aDcsxEadP 5. Theory of Machines: kzbin.info/aero/PLIhUrsYr8yHx0aFXSQvT7nm6ivJSMKnAU 6. Machine Drawing: kzbin.info/aero/PLIhUrsYr8yHzwT06rv7u3tqdfmmKOCz1w 7. Engineering Services Examination_Engineering Drawing_Prelims: kzbin.info/aero/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU 8. Physics for Class 11: kzbin.info/aero/PLknJ2c9H1euEwtFJLUGZvkjG35OoVvemM 9. Manas Speaks Series: kzbin.info/aero/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0 10. Physics Channel Link: kzbin.info/door/_aqx41HWeOebfL6FqBYU6Q My AMAZON Store - For all you students. www.amazon.in/shop/manaspatnaik

[@samuelmanohar407]

Superb👌👌👌👌👌

[@suraj_naik_7]

Sir your hardwork make our work easy Thank you for others we pray for god to help you in your future 🤝 There r few people like u in this world 🌍 we thank you for being part of our life ❣️

[@suraj_naik_7]

Helping

[@darth_sidius5311]

Sir the rajnikant part was lit 😂😂😂

[@ankushroy511]

Sir can you tell me why we do section of solid what are their live example

[@ManasPatnaikofficial]

Hi ankush.... This video probably will answer your query.. kzbin.info/www/bejne/aoHcfJh8fM97hac

[@alishasultana6647]

Thank you so much sir. I was like crying when I wasn't able to solve this problem but thanks to you.

[@ManasPatnaikofficial]

Keep learning.... All the best

[@alone-ds9nq]

Good teaching sir

[@smadhavan1389]

Great work sir....sir is there any videos for perspective projection...I love it way of teaching

[@ManasPatnaikofficial]

Madhavan it will be uploaded today

[@annapurnanunna9140]

Sir.... your videos are really helpful and your explanation very clear and we able to understand these types questions and thanks for making these video ....I highly recommend your channel Sir.....once again thank you so much sir🙂

[@ManasPatnaikofficial]

Thank you so much for the motivation. My best wishes are with you all.

[@sarfarasnawaaz.u4169]

A cylinder of 40 mm diameter and height 60 mm is having its axis vertical. It is cut by a plane perpendicular to VP and inclined at 45o to HP and intersecting the axis 32 mm above the base. Draw its front view, sectional top view, and true shape of section

[@swedharajp9693]

Really good 🤗🤗

[@swamyamgoth7889]

Thank u sir by watching this video I get relief now because today is my exam

[@ManasPatnaikofficial]

I wish you good luck Swami and all the very best for your examination

[@Utkars11]

Awesome sir , your explaining method is great

[@_SamrudhiJulme]

Awesome video sir !! Helped a lot ! Thank you 😊

[@ManasPatnaikofficial]

Thanks Samrudhi And Do spread a word about this channel among your friends and classmates so that they can also benefit. All the best.........

[@kaldentamang2671]

sir what about the mini drafter video???

[@allrounder7770]

Sir ji tusi bahut badhiya padhte ho🙏🙏🙏👍👍👍👌

[@ManasPatnaikofficial]

All the best. 1. Engineering Drawing (English) : kzbin.info/aero/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS 2. Engineering Drawing (Hindi) : kzbin.info/aero/PLIhUrsYr8yHx0C3ebAW-FQxTP8ig8-QxU 3. Engineering Mechanics: kzbin.info/aero/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS 4. Mechanics of Solids: kzbin.info/aero/PLIhUrsYr8yHzft7ygw5THZo4aDcsxEadP 5. Theory of Machines: kzbin.info/aero/PLIhUrsYr8yHx0aFXSQvT7nm6ivJSMKnAU 6. Machine Drawing: kzbin.info/aero/PLIhUrsYr8yHzwT06rv7u3tqdfmmKOCz1w 7. Engineering Services Examination_Engineering Drawing_Prelims: kzbin.info/aero/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU 8. Physics for Class 11: kzbin.info/aero/PLknJ2c9H1euEwtFJLUGZvkjG35OoVvemM 9. Manas Speaks Series: kzbin.info/aero/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0 10. Physics Channel Link: kzbin.info/door/_aqx41HWeOebfL6FqBYU6Q My AMAZON Store - For all you students. www.amazon.in/shop/manaspatnaik

[@affanfarooqui2356]

Amazing video sir . Truly a knowledge boosting video

[@JefinBabyDMME]

Thanks 4 urr helpfull videoss👌👌👌

[@funnyrajkumar3477]

Thank you so much sir.... Your video help me a lot ....please upload such kind of video..... You are really great sir...

[@ManasPatnaikofficial]

You are welcome Arabindra...... All he best.......more videos will be uploaded in future.

[@Nikhilkumar-ge4lb]

thank you sir .. your videos have helped me alot .. 🙂☺️

[@ManasPatnaikofficial]

Hi Nikhil.....Thanks for appreciating my work…and all the best for your examI am sure this channel is helping you learn…You can support my channel by donating and do watch this video: kzbin.info/www/bejne/jZfchnierc2dkLd8ave a nice day.

[@Nikhilkumar-ge4lb]

Manas Patnaik yes sir your videos have helped me alot.. thank you so much.

[@ramakrishnamedi5449]

🙏🙏 🥳🥳🎊 really great

[@vaibhavgupta7429]

great video sir , it really helps a lot

[@ManasPatnaikofficial]

Thanks vaibhav for appreciating my work... Do encourage your friends also to subscribe and learn from this channel..... All the best in life....

[@mahfooz29]

Thanks Alot For You're Brief Explanation...😇

[@just_trippn]

You are just amazing ❤️

[@ManasPatnaikofficial]

All the best. Subjectwise Playlist: 1. Engineering Drawing/Graphics (English): kzbin.info/www/bejne/jXiZeWWmfriIsLM 2. Engineering Drawing/Graphics (Hindi): kzbin.info/www/bejne/iXObZJaLlqacea8 3. Engineering Mechanics / Applied Mechanics: kzbin.info/www/bejne/kGW6f2WQbtSenNU 4. Mechanics of Solids / Strength of Materials / Mechanics of Materials: kzbin.info/www/bejne/eaCXip-Xq6ijm7M 5. Theory of Machines: kzbin.info/www/bejne/eaCXip-Xq6ijm7M 6. Machine Drawing: kzbin.info/www/bejne/n3emn3mLh556msU 7. Engineering Drawing for Engineering Services Prelims: kzbin.info/aero/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU 8. Physics for Class 11: kzbin.info/www/bejne/ZpfIm4h5bJ5_kLs 9. Manas Speaks Series: kzbin.info/aero/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0 10. Channel 2 Link: kzbin.info/door/_aqx41HWeOebfL6FqBYU6Q

[@subhadippal8049]

Thank you sir ...your videos help me so much ....

[@umertalha9637]

Thanks alot for all your efforts .

[@PrafulBhadane-u4j]

cylinder of diameter of base 40 mm and axis 55 mm long is resting on its base on H.P. It is cut by a section plane, perpendicular to V.P. and inclined at 45⁰ to H.P. The section plane is passing through the top end of an extreme generator of the cylinder. Draw its projections and development of the lateral surface of the cut cylinder. (for

[@salafishabnum2626]

It really helps a lot ....thanku sir

[@ManasPatnaikofficial]

Hi salafi.... Thanks for appreciating the content... All the best and do let your friends know about this channel so that they can also benefit....

[@divyasreepalampalli3194]

A cylinder, 65 mm diameter and 90 mm long have its axis parallel to the H.P. and inclined at 30" to the V.P. It is cut by a vertical section plane in such a way that the true shape of the section is an ellipse having the major axis 75 mm long. Draw its sectional front view and true shape of the section.

[@rupalsaini1515]

sir u are doing great job . your video help us very much

[@Ajeetkumar-ph6ru]

Great man ...good work..

[@ashtamilakhe9864]

Keep uploading video sir.It helps us lot of.

[@ManasPatnaikofficial]

Hi Ashtami..... Keep learning and do let your friends know about this channel so that they can also benefit... All the best.....

[@namanaviator489]

Thank you manas for the videos of this but plz make some videos on development of curves

[@ManasPatnaikofficial]

Already made. Check out on my channel page

[@Diary_of_Debasreeta]

sir.. pleases make a video on section of sphere.. it will help us... thank you so much for everything.

[@--Srinivas]

Your classes very helpfull to me,thank you so much sir...

[@ManasPatnaikofficial]

Hi Srinivas..... Thanks for appreciating my work.... All the best in life... And do let your friends know about this channel so that they can also benefit....

[@--Srinivas]

Ok sir

[@--Srinivas]

Sir i am studying Diploma in ECE i completed my 1 st sem, your videos very helpfull to me undoubtedly i got above 50 out of 60 thank u sir

[@ramagrawal4064]

Also sir plzz make a video on how to use french curve perfectly

[@akhilvarma4034]

thank you very much sir.this video helped me alot

[@ManasPatnaikofficial]

Akhil.....Thanks for appreciating my work.... All the best in life And do recommend this channel to your friends and classmates so that they can also benefit... Cheers....

[@himanshuatri2689]

Sir , your videos are great and you are highly recommended here in nit delhi.

[@ayushdewangan3792]

Sir can you tell me the length of major and minor axis of this question

[@VIJAYKUMAR-ei3vq]

Dear sir make some video lecture for ese prelims ...

[@yaswanthkumarijju3504]

Superb you have give me a wonderful class sir 😍

[@ManasPatnaikofficial]

All the best. 1. Engineering Drawing (English) : kzbin.info/aero/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS 2. Engineering Drawing (Hindi) : kzbin.info/aero/PLIhUrsYr8yHx0C3ebAW-FQxTP8ig8-QxU 3. Engineering Mechanics: kzbin.info/aero/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS 4. Mechanics of Solids: kzbin.info/aero/PLIhUrsYr8yHzft7ygw5THZo4aDcsxEadP 5. Theory of Machines: kzbin.info/aero/PLIhUrsYr8yHx0aFXSQvT7nm6ivJSMKnAU 6. Machine Drawing: kzbin.info/aero/PLIhUrsYr8yHzwT06rv7u3tqdfmmKOCz1w 7. Engineering Services Examination_Engineering Drawing_Prelims: kzbin.info/aero/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU 8. Physics for Class 11: kzbin.info/aero/PLknJ2c9H1euEwtFJLUGZvkjG35OoVvemM 9. Manas Speaks Series: kzbin.info/aero/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0 10. Physics Channel Link: kzbin.info/door/_aqx41HWeOebfL6FqBYU6Q My AMAZON Store - For all you students. www.amazon.in/shop/manaspatnaik

[@anuragavusula3114]

thanks for your​ helpful videos

[@ManasPatnaikofficial]

Anurag....Thanks for appreciating my work.... All the best in life And do share and recommend this channel to your friends and classmates so that they can also benefit... Cheers....

[@ramagrawal4064]

Sir as it is a cylinder why u darken the middle line in front view ?? It will a smooth surface and have no sharp end ? Hope u will answer it

[@ankitanimbole8095]

Can you please solve this : vertical cylinder of base diameter 45mm and axis length 60mm is cut by a plane perpendicular to VP and inclined at 50 degrees to HP,is passing through the center point of the top face. Neatly draw the sectional top view,calculate the development length for circle and show the developmentof the lateral surface

[@AhmedAli-jl6jy]

Manas are you sure after section it's circle? I don't think so it's gotta be ellipse

[@aniruddhapatra6704]

What is the top view of an elliptical plane when it is perpendicular to the vertical plane and make an acute angle to the horizontal plane?????????

[@yesmarku]

Awesome sir,

[@ManasPatnaikofficial]

Hi Kumar..... Thank u for the comment....... All the best and do let your friends know about this channel so that they can also benefit...

[@sachinj8655]

Great Job

[@awantikasingh1346]

amazing sir...thnks alot fr these videos...

[@ManasPatnaikofficial]

Keep learning Avantika and all the very best

[@awantikasingh1346]

Thnk u soo much sir...really its vry helpful...n yr efforts r really appreciable...😊😊

[@josepeixoto3384]

forget it, i have that problem to construct a stainless butterfly for a boat exhaust,at 45º,won't even think of doing it this way,too many points needed: i will section the pipe at 45º in a saw, then lay the cut end flat on the stainless sheet metal and draw it, then cut the oval butterfly.

[@muhammadareeb9439]

👍 GREAT SIR

[@ashishsinha7135]

Sir please if you can make videos on assembly drawing, it would be really helpful

[@rahulpanhalkar9756]

Thank you sir your video help me to solve kt in edg

[@bonifaceburito7664]

Hellow sir..this is good... Can you help me on how to draw various mechanisms?

[@KrishnaAjith27]

Can you please do a video on designing of machine parts

[@mecool9560]

Shot.thanks alot.the videos really help

[@ManasPatnaikofficial]

Hi Mr. Cool..... I am sure this channel is helping you learn... All the best.....And do let your friends know about this channel so that they can also benefit,....

[@CanaldoMiauOfficial]

Brvh that's amazing!

[@ManasPatnaikofficial]

thank u ....... 😀Do share this channel and its playlist with your friends. 1. Engineering Drawing Playlist: kzbin.info/aero/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS 2. Engineering Mechanics Playlist (OLD): kzbin.info/aero/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS 3. Engineering Mechanics Playlist (NEW 2023-2024): kzbin.info/aero/PLIhUrsYr8yHxeypEyVdWeGNxWHjNxU_JP 4. Mechanics of Solids Playlist: kzbin.info/aero/PLIhUrsYr8yHzft7ygw5THZo4aDcsxEadP 5. Theory of Machines / KOM / DOM Playlist: kzbin.info/aero/PLIhUrsYr8yHx0aFXSQvT7nm6ivJSMKnAU 6. AUTOCAD Playlist: kzbin.info/aero/PLIhUrsYr8yHyLArdiiSDLa0Fmz8YKIy7G 7. Machine Drawing Playlist: kzbin.info/aero/PLIhUrsYr8yHzwT06rv7u3tqdfmmKOCz1w Visit Main Channel Page(@manaspatnaikmech) for Playlists on specific topics. Second Channel for Hindi Audience: @btechplus Download the Manas Patnaik App for Premium content : bit.ly/3wMRxoc

[@hariharanm2906]

THANK YOU VERY MUCH SIR

[@sritechnovideos1767]

Supper sir your vedios are helping a lot

[@aniketjain3053]

Your videos are mind blowing but the one dimension you had done in between the figures, otherwise awesome 🇮🇳

[@technologyhacks6474]

Very helpful sir

[@kirin263]

You are great sir

[@Master123-k6h]

Sir if point 32 is below the top base so how the fig was made ?

[@DL91ERA0]

🔥🔥🔥🔥🔥

[@jayDarji395]

How to use french curve in drawing of curves quickly?

[@pranavmishra9120]

excellent work sir

[@ManasPatnaikofficial]

Thanks pranav

[@venkyrajan4550]

Thank u for ur perfect explanation sir.

[@sanchitadas9823]

I was following the steps very seriously until that Rajnikant part came...😂😂

[@ravalimogili2362]

Is it must to give the result shape a shading

[@biuhalchatterjee2775]

Sir how to join the points properly for the 2nd circle? I mean by a compass it's not possible.

[@ManasPatnaikofficial]

join via freehand or use a flexicurve

[@biuhalchatterjee2775]

Manas Patnaik thank you very much Sir

[@manalishele1508]

Ty....... Sir😊

[@ManasPatnaikofficial]

Hi Manali....Well Thanks for appreciating my work... All the best in life And if you wanna support my channel visit this link: manaspatnaik.in/?page_id=401 Small contributions can make a Big Difference