SECTION OF SOLID_PENTAGONAL PYRAMID_Problem 8

[@naomibarretto6325]

I'm in my 2nd semester doing EG 2 and you are yet again, saving my doomed ass. Thank you so much sir!!! May God bless you alwayyyss

[@ayushsaxena7770]

plz write the actual question in description ,it becomes easier to see and understand.

[@pritishmehndiratta9]

thank you so much, sir. You are doing such a noble deed.... highly appreciable.

[@ManasPatnaikofficial]

Thanks Pritish for appreciating my work.Do encourage your friends also to subscribe and learn from this channel.....All the best in life.....

[@sumoprashar1433]

Sir thank you engineering drawing mujhe sanajh mai nhi aata tha but apse padhkr aa gya Thnq very much sir

[@lonekhursheed6075]

Should'nt its base edze perpendicular to vp at extreme right during top view?

[@sivakishorereddyseelam747]

sir its a very good explanation never seen ever

[@ManasPatnaikofficial]

Thanks siva for appreciating my work... Do encourage your friends also to subscribe and learn from this channel..... All the best in life....

[@sivakishorereddyseelam747]

sure sir

[@sivakishorereddyseelam747]

bcoz of your channel i did my eg and sem very well

[@chinmaysamant6553]

Sir kya sahi padhate ho aap..... Hamare sir ko bhi apka channel dekhna cahiye

[@NitishGupta04]

Sir in case of solids if the condition is given that the Pentagon is resting on corner in hp then we make corner on the right side 🤔 I think if this condition is given in planes then the corner will be placed on the left side, right side for solids

[@priyansusingh9589]

A hexagonal pyramid side of base 60 mm and length of the zis 140 mm is kept on the ground on its base. It is cut by an A.1.P inclined a 45 to the base and cutting the axis at 94 mm from the apex. Draw the ievelopment of the lateral surfaces of the pyramid.

[@logan_il]

You are my god bro really I passed the exam

[@ManasPatnaikofficial]

I wish u good luck Anil and a great future ahead.....All the best......Keep working hard and keep learning

[@logan_il]

I want mechanics sir

[@ManasPatnaikofficial]

Engineering Mechanics | Applied Mechanics: kzbin.info/aero/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS

[@spedups4]

A pentagonal pyramid of side of base 35 and axis 50 long, stands with its base on H.P such that, one of the base edges is perpendicular to V.P. A section plane parallel to V.P cuts the solid at a distance of 15 from the corner of the base which is nearer to the observer. Draw the top and sectional front views of the cut solid.

[@vishnuluckum9492]

Thank you so much sir I have doubt about that when I have seen your video I get clarity about that

[@vyacheslavkervezee8938]

Thanks a lot from CEG, Chennai

[@ManasPatnaikofficial]

Thanks for appreciating my work Vyacheslav... All the best man Reply ·

[@tastyhealthytreat5043]

sir plllz tell me how will be the solid in parallel and perpendicular condition

[@rahullaha3560]

Sir why we shouldn't take the edge of base in right side perpendicular to vp?

[@adityalochan7256]

Can we take the base edge which is perpendicular to vp to left or right or our wish plzzz reply quick I have exam tomorrow at 8:30

[@BTCIVRadhikaModi]

Sir woh section plane parallel kaise hua .. perpendicular hogya na agar jaise aapne draw kia

[@technologyhacks6474]

Sir it is written that we have to take 8 mm away from the axis does it mean that we can cut the top view from any side has taken 8 mm from the centre?

[@prafullatripathi8039]

sir I want to learn a section of pentagonal pyramid which is cut by mid point of axis and parallel to vp

[@ManasPatnaikofficial]

ya sure... Post the description of that problem

[@technologyhacks6474]

a pentagonal pyramid footed on base on HP and its base side is parallel to VP is cut by a section plane perpendicular to HP and inclined at 45 degree to VP? So please help me solve this and its explanation is great

[@tastyhealthytreat5043]

sir if pentagon is parallel to vp and perpendicular to hp how will be the pentagon

[@varunkaushik2732]

Is there engineering drawing in mechanical and civil syllabus?

[@jramanji2072]

hi sir your work is awesome

[@ManasPatnaikofficial]

Thanks Raman... All the best man.. And do encourage and recommend this channel to your friends...

[@jramanji2072]

yes sir i told them about your videos and also share

[@AMANKUMAR-un6pg]

Sir ,can I take auxiliary reference for section of that question

[@sunilpatil8774]

in front of axis means xan we draw same section at the front view

[@ummallamamatha2642]

Best teaching

[@josjroy4237]

How to it's cuts at 60° to the hp.....and passing through highest point of the base.....please help me

[@sandeeprawat5690]

Sir can I get the answer of following question.. I will be helpful for you.. Q. An isoceless triangle has base 45 mm and altitude 60 mm.it is so placed that in its front view it is seen as an equilateral triangle of side 45 mm and having a side inclined at 40 degree to the hp..draw it's projections..?

[@p.k.maurya1383]

When axis of pentagonal pyramid or prism is inclined to HP and cut by a plane passing through top corner of base . How should we draw it....?

[@p.k.maurya1383]

Plane is horizontal

[@gsr3588]

Really thank you sir!!

[@lavanyagadey1047]

Thank u sir really great explanation

[@nandhinis8438]

finally understood!! thank u sir!

[@sayandutta8985]

very good.

[@pinapalaswethakiranbhushan9010]

i have doubts regarding the sectional side view for these diagrams : (

[@ojaseeduble9310]

Why isn’t the sectional side view made?

[@ak20mgamer]

Thanks sir❤

[@harshasai6660]

Is every darken and lighten line shown in vdo be drawn with Hb and 2h respectively

[@ManasPatnaikofficial]

Yups....

[@harshasai6660]

Manas Patnaik thank you sir..!

[@aqibnabi4681]

Thank You Sir

[@subhadeepdey5849]

How to draws its true shape?

[@ManasPatnaikofficial]

Ï_Âm _ÂvïRâj AViraj....its front view is infact its true shape.....

[@subhadeepdey5849]

+Manas Patnaik Thanks...

[@sandhyabhujel6206]

What if the plane is inclined at 45°

[@Ved_04]

Thank you very much sir

[@Ved_04]

We are ask to draw the true shape of section how to draw the true shape?

[@ManasPatnaikofficial]

True shape of section is visible in front view itself... Vedant i would suggest u to watch the video again....

[@sreelekhas6837]

Why can't we extend b'c' to o'd'

[@shivampanchal6366]

Sir Why It Cuts From Top View Why Not In Front View ?

[@ManasPatnaikofficial]

because its an auxillary vertical plane. And that showed in the solidworks animation also. Shivam do read the question....I am sure ur doubts will be cleared....

[@sowtheshv9904]

Wow

[@kusumnegi5303]

Thanks

[@ManasPatnaikofficial]

"THE MANAS PATNAIK LIBRARY" Topic-wise Playlist of Engineering Drawing / Engineering Graphics in English 1. Orthographic Projection: kzbin.info/www/bejne/jXiZeWWmfriIsLM 2. Projection of Point: kzbin.info/www/bejne/nHyXmWidgpxmrZo 3. Projection of Line: OLD: kzbin.info/aero/PLIhUrsYr8yHz_FkG5tGWXaNbIxVcibQvV NEW: kzbin.info/www/bejne/pquoYXdjfs-rmpY 4. Projection of Plane: kzbin.info/aero/PLIhUrsYr8yHx7TVB51jN3HZVyW3R6RiBg 5. Projection of Solid: kzbin.info/aero/PLIhUrsYr8yHxARPzEFz1nXgt8j6xF_tEm 6. Section of Solid: kzbin.info/aero/PLIhUrsYr8yHwAbiCATZUbzd_CpF0EHF3v 7. Development of Surface: kzbin.info/aero/PLIhUrsYr8yHwdB96ft6c0Uwc4SDCLuG1v 8. Auxiliary Plane: kzbin.info/aero/PLIhUrsYr8yHxHWk2TCg1SrphF1vKpHXoB 9. Interpenetration of Solids: kzbin.info/aero/PLIhUrsYr8yHyTGceE1TGhCSxxfHyFpnNM 10. Isometric Drawings: kzbin.info/aero/PLIhUrsYr8yHxVky7bfrnbRcdXcHjT_K83 11. Conic Sections: kzbin.info/aero/PLIhUrsYr8yHx0TuqsY0FUZ7Z24BbKxJoQ 12. Cycloidal Curves: kzbin.info/aero/PLIhUrsYr8yHwwA8eBea78pJW1lw9XAv6z 13. Involute: kzbin.info/aero/PLIhUrsYr8yHzu8pqYvGwQoJKVpuS1Jusa 14. Plain Scale and Diagonal Scale: kzbin.info/aero/PLIhUrsYr8yHwTgo_zu_ELqOC1ypcp5Gr9 15. Complete Engineering Drawing in one single Playlist: kzbin.info/aero/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS Topic-wise Playlist of Engineering Drawing / Engineering Graphics in Hindi 1. Orthographic Projection in Hindi: kzbin.info/aero/PLIhUrsYr8yHy3chHVzYA4BMbY9DbhyYSY 2. Projection of Point in Hindi: kzbin.info/aero/PLIhUrsYr8yHwinNUxVA1NW0xxLRlDfINH 3. Projection of Line in Hindi: kzbin.info/aero/PLIhUrsYr8yHyvWb87YtG3A3jDEnChgzir 4. Projection of Plane in Hindi: kzbin.info/aero/PLIhUrsYr8yHxj9N5e1oZA0x_k5ZVssf3U 5. Projection of Solid in Hindi: kzbin.info/aero/PLIhUrsYr8yHylYPjrulRGm8DSPiimxP3P 6. Scales Hindi-Urdu: kzbin.info/aero/PLIhUrsYr8yHzJA426HjlEmiRqUkJTkozB 7. Section of Solids in Hindi: kzbin.info/aero/PLIhUrsYr8yHz2Sv6RNP9c5owe5Sic1IMC Topic-wise Playlist of Engineering Mechanics / Applied Mechanics / Fundamentals of Mechanical Engineering in English 1. Forces: kzbin.info/aero/PLIhUrsYr8yHzoyUutEK57JzWy1n-vxIS0 2. Friction: kzbin.info/aero/PLIhUrsYr8yHwY1TDraJpyYkU8Zug-kM4m 3. Shear Force and Bending Moment: kzbin.info/aero/PLIhUrsYr8yHy1lc0hEhbpEAGsGwNmUWt7 4. Trusses: kzbin.info/aero/PLIhUrsYr8yHwIXEt9cqjEsEO8l83xcIf7 5. Centroid and Centre of Gravity: kzbin.info/aero/PLIhUrsYr8yHzZ52dVA3wQ_0IQVl7CKL7p 6. Moment of Inertia: kzbin.info/aero/PLIhUrsYr8yHw8qWxAVOx-5Y2XfGPOmcDy 7. Dynamics: kzbin.info/aero/PLIhUrsYr8yHwOZxmY63A_lURu6c-jNk-z 8. Complete Engineering Mechanics / Applied Mechanics in one single Playlist: kzbin.info/aero/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS Complete Playlist of ENGINEERING SERVICES EXAMINATION: kzbin.info/www/bejne/mZKYeqqep6iBmLM Complete Playlist of Machine Drawing: kzbin.info/www/bejne/n3emn3mLh556msU Complete Playlist of Theory of Machines / Kinematics ofMachines / Dynamics of Machines: kzbin.info/www/bejne/eaCXip-Xq6ijm7M

[@pavithrasampath6811]

Thanks sir

[@dikshasoni2449]

Mast h

[@vsgroupvs3887]

Sir please paper nenu adna work maderudu edra ake sir

[@AbjSir]

skip it quick

[@wasimniyaz6146]

👌

[@101_satishasawale4]

💯🙏🏼🙏🏼🙏🏼

[@PrasannaLankadi-u2t]

Hlo sir

[@mandaprashanthbabu608]

U are telling fast, can u tell slowly because I can't understand your teaching

[@ManasPatnaikofficial]

KZbin player setting allows you to slow down speeds

[@ManasPatnaikofficial]

Engineering Drawing HINDI: kzbin.info/aero/PLIhUrsYr8yHx0C3ebAW-FQxTP8ig8-QxU Download the Manas Patnaik app now: bit.ly/3wMRxoc Engineering Graphics and Drawing (Enroll Now): on-app.in/app/oc/130288/cwcll Complete AutoCAD 2D and 3D (Enroll Now): on-app.in/app/oc/112626/cwcll