Section view in Design Modeler | ANSYS design modeler tip and tricks

****************************************************************************
Procedure to install ANSYS 2024 R2 Professional version : • How to Install ANSYS 2...
Contact at [phone] for software link etc.
Procedure to install ANSYS 2024 R2 Student version: • Installing ANSYS 2024 ...
Download ANSYS student version from here :
www.ansys.com/....
****************************************************************************
My udemy courses on CFD:
NREL 5 MW Wind Turbine : CFD Analysis with Validation www.udemy.com/...
5 MW NREL Wind Turbine CAD modeling
www.udemy.com/...
CFD analysis of NASA Rotor 37 and performance prediction www.udemy.com/...
Journal Bearing CFD analysis and validation www.udemy.com/...
CFD analysis of backward facing step (BFS) and validation www.udemy.com/...
CFD analysis and validation of ONERA M6 in ANSYS Workbench www.udemy.com/...
Introduction to Fluent Aero package
www.udemy.com/...
CFD analysis of ONERA M6 wing - Part 3 CFD and validation www.udemy.com/...
CFD analysis of ONERA M6 wing - Part 2 Hexa Meshing www.udemy.com/...
CFD analysis of ONERA M6 wing - Part 1 Geometry modeling www.udemy.com/...
Master Heat Exchanger CFD analysis using ANSYS CFD www.udemy.com/...
Absolute Beginners Guide to CFD simulation in ANSYS www.udemy.com/...
CFD analysis of 2D H-Type Darrieus Turbine (VAWT)
www.udemy.com/...
CFD analysis of flow over vehicles including Formula One
www.udemy.com/...
CFD Analysis of NREL Phase VI wind turbine
www.udemy.com/...
ICEMCFD Master Class (Level 2)
www.udemy.com/...
ICEMCFD Master Class (Level 1)
www.udemy.com/...
ANSYS ICEMCFD Hexa Basic course (Part 2)
www.udemy.com/...
ANSYS ICEMCFD Hexa Basic course (Part 1)
www.udemy.com/...
ANSYS Spaceclaim Direct Modeler
www.udemy.com/...
CFD of External Aerodynamics and Turbomachinery www.udemy.com/...
ANSYS CFD for Turbulent Aerodynamics Flows
www.udemy.com/...
Mastering ANSYS CFD
www.udemy.com/...

[@shanmukhmullapudi1524]

Hello sir im having problem regarding mesh in a 2d model in ansys im not getting tool bar can you please help me out

[@azzilhem7079]

Can you do a video about CFX Post please To get graph of ( tangential velocity* versus dimensionless radial cordinate) And (Power number versus Reynolds number ) And hiw can i drwa the line of Z*= 0.5 (ps : the diametre of cylinder = 0.3m , and H=0.3m) Pls

[@CFD_Mechanic]

check my video on post processing in CFD Post