Diy Metal Band Saw Using Bicycle Wheels

Support me on Patreon: www.patreon.co... Project no.82 Diy Homemade Bicycle band Saw
i build this project to have a aluminum cutter, using hacksaw to cut aluminum is kinda difficult and take some time. parts are some metal tubular, bicycle wheels and 1hp induction motor.
got a good result in the end, it cut through thick metals. im so glad that it work that way.
i hope you got an idea in to this project. thanks and godbless
LINKS THAT HAS BEEN USED IN THE VIDEO:
Cutting Band Saw Blade: sea.banggood.c...
DANIU-3rd-Anniversary-Sale : bit.ly/2LXlsFz
YOU CAN SUPPORT THIS CHANNEL BY BUYING THIS ITEMS.
Machifit MGN12H Linear Rail Block：bit.ly/2WFBoyn
Machifit MGN12 600mm Linear Rail Guide with MGN12H Block: bit.ly/2HT4WVP
Machifit MGN12 1000mm Linear Rail Guide with MGN12H Linear Sliding Guide Block: bit.ly/2FSsVSF
8mm Bore Diameter Pillow Block Ball Bearing: bit.ly/2OJeHX3
7pcs 12mm Shank CNC Lathe Turning Tool Holder Set: bit.ly/2K4VBMy
G1/4-19 13x2mm BSP 55 Degree Tap: bit.ly/2TSVnrB
Titanium Coated Deburring External Chamfer Tool: bit.ly/2OG5HCi
Pillow Block Bearing: bit.ly/2uE97MG
Push-pull type fast clamp: bit.ly/2FQ5k3N
2032mm x 13mm Saw Blade: bit.ly/2QRKYQb
Handheld Copper Pipe Tube Expander: bit.ly/2rWa6pW
SBR20-1200mm linear rail and SBR20UU Blocks: bit.ly/2RiKUIC
SBR16 1000mm Linear Rail and SBR16UU Bearing Blocks: bit.ly/2GIcniW
Drillpro Turning Tool Post Holder: bit.ly/2EUban5
SANOU K12-100 Lathe Chuck: bit.ly/2TextHc
Slide Bearing Block: bit.ly/2RhZe4d
Slide Bearing Block: bit.ly/2Q6K4tU
20Pcs Diamond Coated Core Drill Bit Set: goo.gl/mPZ4B6
Opening Locator: goo.gl/sQmMce
LIKE MY FACEBOOK PAGE / pinoydiybuilds
SUBSCRIBE TO MY CHANNEL / sekaustria
AND SUPPORT ME ON PATREON / sekaustria
Like Share Subscribe for a Weekly Videos #Diy-Projects #Homemade-Projects #DoITyourSELF-Videos #DIY-Channel

[@reva1490]

Thank you sir, my father spent half a day watching all of this on his small phone, redrawing every step of this video, with every single detail. He asked me to save this video for him, he doesn’t get what youtube is. He suffered from motorcycle accident 2 years ago and doesn’t feel his feet, but he spends most of his free time in his little garage and makes things for garden, cars and tools, despite walking with canes. You brought him inspiration and joy. Salute.

[@psary644]

Que linda história

[@ulysses_grant]

Hope he is fine brother. Very inspiring!

[@altasebteshome7001]

Thank you sir, can you tell me the motor types and Ph?

[@normanatkinson5055]

Probably the best DIY project I have seen on KZbin. The design and construction was excellent. Yes, there are alterations that could be made, but he achieved what he set out to build, and it works. Tradesman.

[@mohammedali808]

Very well done. Consider placing a guard at the front of the saw blade just above the guide bearings. This would prevent accidental touching OR should anyone stumble they will not get in contact with the moving blade.

[@merouanemegdad8041]

Your work is very good. You are a person full of charity.thank you

[@gorp27]

You have got to be the best home shop fabricator on KZbin. Keep up the good work.

[@surasaksrisuksawadikul6790]

จค

[@YoTu77]

really well done! Just one hint: you should better create a housing around your bandsaw for safety in case the band will break unexpectedly, then it's perfect!

[@aliciagalindo3038]

A very very fine craftsman I know lopped 4 fingers of his hand when the bandsaw blade he was using broke. Pinky all the way angling up to the 1st digit of his index finger. The other 2 in that diagonal line. They reattached them, but he used to tell me when it was cold outside, if I ever lose cut my fingers off, toss them in the trash can, cause his hurt all the time. I think he was just complaining cause they hurt. I always thought I'd rather have 4 pain ridden fingers than no e at all. Crazy scar he's got too. I know another guy lost all fingers on both hands minus thumb and Pinky. Always Hawaii time for that man. That was in a winch on a dozer. His fingers were not savable. He gets by. Not on welfare. Drives a wrecker. Don't grab a winch cable too close to the drum, and ask the inexperienced guy on the machine to let line out. He might let the cable in on accident, and bring your fingers or more with it. Grab that thing as far away from that drum as possible. So you have more than plenty of time to drop that bitch before it can eat your hands. Machines have zero empathy, or conscious. They will eat you up, like you weren't even there, and just continue on with zero fucks given. They are awfully handy to have around, but don't expect an apology when you stick your head, or han in her mouth, and the bitch bites you, chews you up, and keeps on pushing. Company gal, she eats while working. Only stopping for some lube, or fuel. I know another girl that had a terrible incedent with one of those mechanical penis tools. It was bad. Caused major mental issues, broke up her marriage, kids got hearts broken, she only wants that machine now. It dont care how heavy she gets, it has a job to do, it damn fuckíng well does it with many fucks given

[@eosdelb]

You have more common sense and usable work knowledge than most people I know. And, that is one bad ass tool you built. I like those guides. Thanks for posting this video.

[@morgansword]

Check out Donn DIY, he has built some stuff with scrap metal that he cleans up to new condition and the builds trailers and brush hogs and his band saw mill is better than wood mizer's saw mill

[@alainhbt7056]

Certainly the best diy band saw on YT 👍

[@adamnurdin8224]

I hope my daughter won't missed her bike... Thanks for the idea

[@SekAustria]

Haha true.

[@TheRitchieLeeShow]

Yea I might steal me a bike tonight.

[@ibmsh]

Nise work But be careful welding galvanized verry dangers use fan when you welding Good luck

[@bounceurabdelaziz4973]

Great work thanks very much for your sharing, Greetings to you from Algeria 🇩🇿

[@lakisasuba]

A man uses his hand is a labourer, a man uses his hand and brain has a workmanship,but a man uses his hand ,Brain and heart is an artist..job well done sir..

[@viorsa8200]

Un proyecto impresionante,a falta de dos manos de pintura ,quedó como de fábrica y reciclando las ruedas,genial un saludo y un like desde Naron(Galicia)

[@mrxman55]

I bow to the young master and inventor!

[@amtiensinh8416]

Your videos are amazing, very detailed instructions for viewers, very helpful for all those who need to learn creativity

[@user-xh9ld9mb9c]

К сожалению не могу прочесть комментарии. За работу однозначно РЕСПЕКТ!!! Основательный подход, ювелирная работа, лёгкое, даже изящное владение инструментами. Просто красиво! Но есть технические вопросы. Почему так много сварки? При возможной поломке сварку придется резать. Может лучше было бы частично собрать узлы (или модули) на резьбах? Шкив на двигателе из чего сделан? Если это текстолит или углеволокно - тогда да, но очень похоже на дерево. Прижимные подшипники для ленты. Видел дважды такие пилы, тоже в сарае сделаны. Так вот под кулисами прижимных подшипников стоят короткие но достаточно мощные пружины. Станок работает гораздо тише и звук мягче. Это так мысли вслух. Но всё равно повторюсь За работу однозначно РЕСПЕКТ! 👍👏🤗

[@seditiousmonkeyart]

Love it. Innovative and resourceful. It is great when someone takes something that is no longer useful for its original design and gives life to something new.

[@PedroGomez-bd9ro]

Great video I personally liked th background sounds over music Thanks for sharing

[@sabrinasantana7809]

WOWWWWW Congratulations young man, you have great talent and skill, your video came to me here in Brazil. You shone in your step by step. God bless you.

[@barrylitchfield250]

Beautiful design, and build. Don't forget to do part two showing how you made and installed the blade guards. Thanks for sharing!

[@sidlung]

Muito bom, gostei muito dessa serra fita, farei uma pra mim baseada na sua, parabéns meu irmão, você é muito inteligente e caprichoso!

[@edwinleach4013]

Amazing work. Thanks for sharing your skills and craftsmanship.

[@truewellu7700]

the best DIY project I have seen on KZbin

[@brucemillar3015]

Amazing result. i'm surprised that no one thought to use bicycle wheels before; it's perfect.

[@letslearnsomething30]

Ayos yung idea mo sa puleya. thumbs up bro 👍👍👍

[@SekAustria]

ayaw nga ma welding e haha

[@letslearnsomething30]

hehe pareho nung ginawa ko na belt sander ayaw din ma welding yung puleya nung motor pundido kasi heehheeh😅

[@letslearnsomething30]

yung sa puleya na gawa sa kahoy ganda ng pag kkagawa mo bro

[@emigdiovasquez299]

Muy buena el trabajo tanto lo busque pero al fin lo tengo lo haré mi amigo gracias felicidades por compartir muchas gracias por tu trabajo .

[@tfk5240]

Its So Wonderful to build bandsaw very nice bro

[@wefixmbl377]

WOw.i.watching.everyday.I.like.so.much.

[@JoseLuis-ob8bn]

muy buena idea y bien echa la sierra , saludos desde ARGENTINA

[@tryingtomake9871]

Very very good work and useful

[@satriosatria9236]

Wow keren mas, disekitar kita juga byk bahan2 ya terima kasih idenya

[@sicarila]

wow great idea to use a bicycle disc as a saw wheel ... thanks for the idea i'm watching it from you

[@lawrenceogden8682]

great video great machine

[@SohailAhmad-by5wi]

Good job brother. You are genius young man..

[@shawnteixeira5068]

Brilliant...dont see why people dont appreciate it

[@johnwinkler2606]

Killer! I have been planning on making one myself and wondering if it would work. Now I know and I can begin.

[@SekAustria]

Nice

[@lonewolf2156]

Wow that thing came together well👍👌

[@pedro_bezerra]

gosto muito dos seus videos porque você não fica falando nem enrolando nem pedindo like. continue assim!

[@budhihantoro7549]

hi,,I m from indonesia,,im like this your project.👍👍👍

[@donstoddard4295]

i was so inspired by your project i built a metal cutting bandsaw and a wood cutting bandsaw i will have to post a video of them in the near future.

[@mohammedfairozsharieff6189]

Love it 👌👌👌👌👌 very very good Module low cost for new start up's it would have been better if you could provide dimensions Sir reallyvery impressed 👍❤

[@valterleao6795]

Parabéns, adorei ver seu trabalho, quanta habilidade e criatividade! Abraço aqui do Brasil

[@ricaroles]

Amazing. I like your work. I am from indonesia

[@KB_Joys]

Very nice good job

[@charlesteddy7578]

Naka2x bilib bro, Ang bata mupa ngunit dami mong alam. Kaya pala ng pinoy.. Mahilig din ako nyan, but ang layo ko sa idea at ingenuity mo. Applicable sa pinoy na low budget. Sana you sell your plans para maka gawa din ako.. Kaya ko nman gayahin yan base sa pinakita sa video pero mas madali kung my dimensions at itemize materials used. More power. Ikaw na idol ko next to Wendel Mathias.

[@SekAustria]

Haha salamat bro pero malayo na agwat ni wendel mathias.

[@rustygear9370]

It may be a good idea to fill those wheel grooves in the way to have a convex shape (with a bump pointing outside) and have a crown pulley rather than regular one to hold the blades. It will require some plastic material (such as two component epoxy, but it will need a lot). Use the motor power to turn them in a lathe like style. The U shaped groove will put unecessary stress on blade teeth and will dramatically decrease their lifespan, teeth may also eat into wheel through rubber and may make them hold the blade inconsistently, which will require frequent maintainance. Beside decreasing stress on the build, crown pulleys are self centering. Very inspiring work. Thank you for sharing.

[@wombleofwimbledon5442]

I'm still new to a good bit of this, but am pleased that your comment crossed my mind as well. I was holding a bike wheel in my hand and said "Hmmm. Go KZbin 'Bicycle Band Saw' and see what pops up." Was not disappointed. Makers on KZbin- Where the Comments are actually part of the Content. Cheers, and Excelsior!

[@bobboboff5326]

Good think! All sample and effective 👍👍👍.

[@user-re9zs4dx2q]

Very wonderful work and all respect

[@TheGbab]

Nice project. Just a note about welding galvanized steel. Grind away the zinc plating first if possible, and do not breathe the welding fumes as they are very toxic. A well ventilated area is good.

[@rea50]

He is wearing breathing mask

[@pikubird]

BHZ Motovlog that’s a dust mask not an aspirator

[@pcka12]

Leave the ends of the tubes soaking in vinegar for 48 hours or so because there is zinc inside the tubes as well as outside!

[@valveman12]

Looks to be working well. I hope you build some covers for safety.

[@davidmckee5659]

That's gonna suck when the blade breaks and whips you in the face or hands. Probably ought to think about a guard around those wheels. Pretty cool!

[@erik....]

Looks great, but I would use rubber sealed bearings for this.

[@belvabeneta6166]

Good job guyz,nice work..

[@manojnaidu8178]

One of the Awesome work, add coolent tank to it...

[@samdiamond1532]

With a basic tools you can do this. It is very smart man. Good Job!!!

[@djamelhamdia134]

I liked the project,but I loved the dog.

[@stephen271]

Bloody awesome 👏 work mate this is my kind of band saw👍

[@abderbhm6086]

Good and Best work thanks for scharing mr

[@jenniferadams8577]

Loud rock music after a 15 minute moderately quiet video is a shock to the ears. The build was fantastic tho.

[@SekAustria]

Sorry about that bro.

[@user-cc8ki6uj6h]

Парень молодец,настоящий кабардинец !

[@user-rz7rp1xy8m]

Уей сыбгъэдыхьэшхам )))

[@user-cc8ki6uj6h]

Нlытlэ адыгэлlкъэ нэгъасауэ!

[@user-rz7rp1xy8m]

Арам уей! Адыгэм къэмыгупсысын щы1э!

[@das1216]

Wow galing naman nyan!

[@SekAustria]

Apu mu

[@faaf42]

This is really beautiful. Hats off!

[@mohdhero8863]

The best handmade tool bro...👍👍👍

[@SekAustria]

Thanks

[@janetquiazon8634]

@@SekAustria sir pwede po magpagawa sa inyo ng belt sander,saan po location nyo para mapuntahan ko kayo pls.po

[@cevelioportillo5317]

Gracias genio por compartir tu idea el modelo la voy a usar para máquina de Carpintería.. mis respetos.. Saludos desde Paraguay

[@benaplokcampandgo]

wow galing talaga idol, nuon ko pa gusto magkaron nyan. dko alam pano gawin. hahaha. nakakabilib ka sek. if you still remember me fan moko nuon pa.

[@benaplokcampandgo]

na inspire ako sayo sek noun pa kaya nag vlog na rin ako pero mga simpleng gawain lang. hahahaha. daan ka naman sa bahay ko para makita mo idol. salamat.

[@SekAustria]

Haha sige bro kapag may time. Goodluck sa career mo bro godbless you

[@Skilllie]

Can only imagine what you can achieve with a metal lathe and milling machine........ kudos!

[@robertsantiago953]

That would take a few xtra years to learn . This guy i suspect he has an engineering degree and started working with metals since he was little kid .He beat me . I started it when i was in my teens

[@ngophuong4548]

Ты очень хороший. Очень умело. От идеи до реальности супер-квалифицированного мастерства. Я действительно люблю и очень уважаю тебя. Тем не менее: Спасибо за клип, чтобы увидеть, у вас есть милая собака!

[@ACreativeWorks]

It's good to see fellow Filipino doing some very good work. Great ideas Sir Sek, keep it up.

[@jorgevillalta4746]

Muy bien excelente amigo ingenioso felicidades bendiciones saludos desde el salvador

[@grahambird1570]

A Man that uses his head and does the stuff !

[@nurfilme]

Das da noch alle Finger dran sind🙈aber sehr gut gemacht👍

[@startidea1854]

The machine is very creative running well

[@Hellfire211961]

Excellent work 👍👍

[@adriantrain2037]

Great idea and great work. 1 suggestion, grind the Gal off be4 welding, especially on low amps. You welds will be considerably better (not that they are bad) and also your lungs will thank you, Gal is some bad voodoo. But keep up the great work and thanks for the inspiration.......

[@zackliwanagan4241]

bilib talaga ako sayo sek lagi ko sinusubaybayan mga vids mo keep up the good works!

[@ngophuong4548]

You are very good. Very skillful. From the idea to the reality of a super-skilled workmanship. I really like and really respect you.However: Thanks to the Clip to see you have a cute dog!

[@CookingGuy815]

Sek Austria Good Idea !!!

[@luizpaulopretti5219]

Se perguntar: Em qual escola você aprendeu fazer isso? Ele provavelmente vai responder: Nenhuma moço! Aprendi sozinho. Por conta de coisas como essa foi que passei a acreditar no que chamamos de Talento. Parabéns camarada!!!Você é uma inspiração para tentarmos descobrir os nossos. Tomara que eu descubra algum.

[@mrupholsteryman]

Thought of this several years back....and EVERYONE seemed to say it would be dangerous and cost more than just buying one with a warranty.... now... I don't have a welder....BUT.... now that I see that it IS possible.... I may just get around to doing it. Thanks for doing what others told me not to! 😊

[@ernestocesarpardo9937]

Hey! Eres un grande! Gracias desde Argentina!

[@eddietowers5595]

You, My Friend are a master craftsman in your own right. It's awesome. Another great video Wait, did you say bone?

[@thelyingscotsman7993]

Yeah I suppose knife makers would like this machine.

[@xeom4cho692]

Làm thêm cái cỡ bên trái chỗ cưa nữa ad.tuyệt

[@alexsandreribeirosilvaalbu5592]

Muito bacana adorei você e um gênio.

[@bobferranti5222]

interesting idea, might have to try it myself! By the way, if you grind or sand the plating from your pieces before you weld them, you will get better welds.

[@TheWielebny44]

Great idea

[@Russiancraft]

Да ладно, один раз пильнул без кожуха, подумаешь. Приделает потом, я уверен. Лично мне все видео понравилось. Идей куча. Руки не из жопы. Все делает чисто, точно и отлично. С меня лайк и подписка с колокольчиком.

[@user-sp1ke1xi8k]

Я абсолютно согласен! Парень молодец.

[@AlexPlanetEarth]

@@user-sp1ke1xi8kМужик рукастый а кохуж он слева приварил, приварит и спереди потом.

[@996Bi]

Такое 1е вижу 👍👍👍👍

[@ivangolota]

Я построил свой рабочий вариант такого станка для дерева на больших вело колесах, можно глянуть у меня на канале

[@user-xm4zt5qs3k]

Нужно шкив привода сделать с внутр.стороны,чтоб каждый раз,меняя пилу не снимать ремень.

[@joaodelima8292]

good job man i think will make one for my self

[@user-ll9my7vf8c]

Молодец классная идея это второй вариант пил заслуживающих внимания!!!

[@alexengine6513]

А какой первый вариант?

[@darthsept]

filipino ingenuity, got to love it!

[@dejayrezme8617]

Interesting approach! You could you double walled wheels and a front hub bicycle motor to build it even easier.

[@MarcioGaldino-rm6zc]

o cara simplesmente é gênio nota mil!! parabéns.

[@kramssuzie7861]

Thank you for sharing ideas..

[@yarrariver09]

great job. I think the belt and the saw will be pain in the ass every time when it comes to replace the saw. it should have had the way in and out each.

[@SekAustria]

I cannot just put the pulley ag the back because it will be unscrew itself from the hub. Not that a big problem i guest.

[@robertosanchezpaes6059]

@@SekAustria bom trabalho vc o projeto com as medidas por favor

[@user-kw5hv4yz2c]

МОЛОДЕЦ, КРУТО ВЫШЛО, РУКИ ПРАВИЛЬНО РАСТУТ...

[@user-mv3cs3ps9u]

88 9888 8 8 8 8 8 8 888 8 888888 9 8 8 8 8 8 98 8 8 88 8 8 8 98888 8 8 8 88898 8 8 8 9 8 8 988888988988 8 98 9 88 8 8 8 9 8 8 9 8 8 8 888 88 8 88888988.

[@artwood8290]

Не тока руки. Но и мозги из правильного места . Попробуй настроить что-б лента не слетала. Я когда сирманы мясников обслуживал то заебался их настраивать. Они туда голову замороженного хряка по утрам совали. И все шло как то грустно. А тут гляжу диски от велика - здоровское решение. Но пока не отваживаюсь повторить.

[@user-ij3lg3su5c]

Amazing I saved the video it will surely help me...😊😊😊😊

[@SekAustria]

Glad to hear that

[@bosal2559]

Hello 👋 very Good very Nice 👍 your Working thanks so much Goodbye my Lovely 😊 next Video 🌹❤️

[@MCsCreations]

Fantastic work, dude! Great idea!!! 😃

[@BS-fh9qp]

Ну да, чем не вариант?! Достаточно легкая конструкция колеса. Но наверно, резиновую часть нужно как-то доработать. Молодец!!!

[@georgesmillion3131]

Du super travail !!! Bravo ! Tolle Arbeit !!! Bravo ! Great work !!! Well done !

[@ondobelnas8523]

Maayo imo ginbuhat maka tabang sa mga negosyante sa kahoy ug puthaw sa pag trabaho nga dali kaayo salamat sa imo invention.