Seniors Wahl Clippers Not Cutting And Clippers pulling hair?? Service For Best Performance Ever

Seniors, Wahl Clippers Not Cutting And Clippers pulling hair? Service For Best Performance Ever, the poor performing hair clipper is no good to anyone. If you have a Wahl Senior that is pulling hair and just not performing, don’t rush to toss it. Instead, let me show you my Larry The Barber Man tips and tricks in order to get it running like a dream once more! In the tutorial video I will show how to adjust Wahl senior clippers for the best performance ever.
If you liked this tutorial, be sure to subscribe for more interviews, lessons, and other fantastic free barbering content. I’d also like to invite you to follow me on Instagram @larrythebarberman as well as check out my Facebook page at / larrythebarberman pages for other free barbering content. You can also email me at [e-mail].
=USEFUL BARBER LINKS
================================================
Barber’s Resource: / barbarvoo
www.barbarvoo.com
=================================================
/ larrythebarberman
/ larrythebarberman
www.larrythebarberman.com
=================================================
Email [e-mail]
=================================================
Barber Videos: www.barbers.tv
=================================================
www.larrythebarberman.com ( My Online Store )
=================================================
Barber Blogs: www.frequency60hz.com/blog
=================================================
Hair Clipper Converters: www.frequency60hz.com
[e-mail]
=================================================

[@Pepsi_Please]

Wow! 😱GREAT INSTRUCTION! 💖💖💖 I just found you by chance. I cant believe how much I learned from just this 1 great video. Thank you so much!👍🤗😊

[@cooleycityy_see_it_too_wis7786]

Definitely works. There are endless videos on how to adjust the tension on Andis clippers because access to the tension prong is right under the blade. But there aren’t any Wahl videos because you actually have to remove the housing to adjust the tension. So great video!!!

[@TheDgmccool]

This fixed my device's problem of not cutting hair. Although I'm not using a Wahl Senior, this solution worked. Thanks a lot.

[@ryanhill7318]

I always appreciate your videos Larry. Thanks! My original seniors are back to 100%

[@SuperSneakySteve]

Thanks so much for this. I spent a lot of money on replacement blades and was about to give up and buy a new clipper. So glad you made this video.

[@marwan-pv7no]

Before your video I was 6 month try to fix my wahel clipper finally you learn me the secret, you're great man, I will follow you all the time

[@larrythebarberman]

mar ram I am glad you found the answer 👍

[@artemisritchie9175]

THANK YOU! i was about to trash my personal set of clippers thinking that maybe they were just old but this saved them and they work like new again!

[@fivetengarage2867]

Thanks very much! I dropped my seniors and they were not performing well. After following your instructions they are like new. Awesome!

[@Dirty_Squirrell]

Well done, Larry! Loads of valuable help in this video.

[@ZakKohler]

Excellent, I too had exhausted all the preliminary checks in my problem was the tension! My problem happened after I cleaned them for the first time forever... It turns out all the built-up crud was helping keep the tension..

[@alperhuseyin8937]

Thanks for this informative video, you helped me tune a new clipper that didn't cut straight out of the box, all good now

[@lornacarlock5757]

Thank you so much! I was getting ready to buy another set of clippers. I have 5 different kinds, very expensive, and none of them worked! I had the blades removed and sharpened and that didnt work either. I am going to take them all apart and fix the tension! Thank you again.

[@TheTosferina]

Thank you very much for your excellent explanations. My wife wanted to get rid of the clippers but after your video we got a working machine again.

[@Labearski44]

Awesome video!!! Thank you Larry the barber man! Respect!

[@lanajacknichols8397]

put my clippers in the box and on the shelf of my closet bout 10 years ago after cleaning oiling and sharpening and they still were pulling hair and leaving patches of hair.i just watched your video and followed instructions and now my clippers work perfectly! thats whats up my friend thank you very much. my safety was never in any danger just to be clear on the whole unplug thing lololol

[@scottgarciamusic8677]

You my friend are a life saver. I cut my own hair and recently it’s been turning out prettt wonky. This fixed all my clippers problems. Thank you so much!

[@AugustusTitus]

Excellent, gonna fix it tomorrow! Thanks!

[@Drinkyoghurt]

My Wahl 5 star basically started tugging within the first month. I always adjusted the power screw, adjusted the blade gap and oiled it but it never really worked. I noticed that whenever I added some more length with the thumb lever it started working properly again, never knew it was because of the tension. This fixed my issues completely. I was literally at my wits end with this thing. Thanks!

[@amoyzegh]

Do you have the cordless one? Because mine it's like they repel hair. And when I use for example my 1 guard for a fade I must go multiple times to a point I have to push hard to the skin, left side is light than the right side... my blades are well aligned. But this issue about not taking off the hair is giving me poor results cause I have to dig into the hair to remove hair.. hope you can tell me something about it cause I haven't got any answer from barbers...

[@zact4289]

Great videos, clear & very informative. Thank you good sir 👍🏼

[@philatkinson2481]

Warning: you must disconnect the power supply before disassembling the clipper which was not done or explained on this video!!

[@larrythebarberman]

Phil Atkinson Thats why we have observant people like you commenting Phil - thank you for valuable input .

[@M0beast]

That's obvious only idiots work on electrical equipment whilst plugged in

[@Axeman369]

@@larrythebarberman hahahahahaa

[@brukshiels3673]

@@M0beast welcome to the internet.

[@Pure_KodiakWILD_Power]

Don't use clippers under water as well.

[@lloydbrown2207]

That was so helpful, thanks Larry

[@babasteve78]

U my friend just saved me money . Respect : )

[@yamilaherrera9827]

Wow bro thank you! Went through every step ,now I'm good

[@Antzzz_Manzzz]

Excellent clear presentation. Thank you 🙏🏼

[@anthonyvaldez6239]

Bro thank you for this video. I thought I had to throw away my wahl senior clipper but I did what u said in the video and all worked out so thank you so much sr.

[@charleslittle1409]

Thank you good Sir. My Wahl Clippers sounded like Ball bearings in a tin can. Now they sound like brand new

[@graham3282]

Absolutely brilliant Larry well done ! thank you from UK

[@konatadesuka]

Thank you very, very much for this video. My clippers were making a terrible noise after dropping them and no adjustment could make them work normally again. For me it was impossible to adjust properly the two torx screws on the side. I used a scale and put 2lb of pressure as instructed, as I'm not from the US or UK, we don't use imperial measures. After tightening the screws, turned the clippers on and they were back to normal.

[@MrDenjok]

You are awesome My designer wahl fell to the floor and I tried everything Taking it apart 3x Now I'm sure I got the fix

[@mikeeaton9822]

Thanks for the info 👍

[@binkhalifa2004]

Excellent video. First one I've seen discussing clipper tension!

[@Heorgath1]

Legend... You just saved me money and made me wiser and happier, because i repaired it myself

[@me6217]

Awesome! Thank you you fix my problem in 60 seconds. My blades were crooked

[@kiddo889]

wow thank you for the help can you show how to tune the wahl detailer thanx mate!

[@KONYIAC88]

Very helpfull thanks for sharing!

[@davinzkie.r]

thanks man..will do this

[@nnamdiezenagu4587]

THANK you for the information.

[@josephwhite8992]

Thank you! This officially solved my problem

[@steventrosiek2623]

Thank you very much for a great video. It is very informative. Saved replacement and expense.

[@Lt_mode]

This is helpful 🔥

[@lew832]

I learned something , Thank you.

[@alessandrolozano7464]

Thanks so much mate I was about to throw away my clippers but that did the job. Aless here all the way from Mexico thanks again

[@amoyzegh]

Do you have the cordless one? Because mine it's like they repel hair. And when I use for example my 1 guard for a fade I must go multiple times to a point I have to push hard to the skin, left side is light than the right side... my blades are well aligned. But this issue about not taking off the hair is giving me poor results cause I have to dig into the hair to remove hair.. hope you can tell me something about it cause I haven't got any answer from barbers...

[@andresizarra2312]

larry man thanks so much i was strugling a lot with my machine till you came to save me man. i folllowed the tutorial step by step and woah its working even better than when it was brand new i cant believe how happy it made me!. please keep the god content

[@amoyzegh]

Do you have the cordless one? Because mine it's like they repel hair. And when I use for example my 1 guard for a fade I must go multiple times to a point I have to push hard to the skin, left side is light than the right side... my blades are well aligned. But this issue about not taking off the hair is giving me poor results cause I have to dig into the hair to remove hair.. hope you can tell me something about it cause I haven't got any answer from barbers...

[@andresizarra2312]

@@amoyzegh no , i have the traditional one. Check out that your razor blades are very well oiled

[@matthewcain2880]

Perfect, ty for posting

[@MyJackel13]

Thank you I fixed my clippers & my timers today

[@amanak4985]

Thank you very much!!

[@smiley3012]

Very good video. Larry

[@mr.fredricklawngtawnghedav5094]

Excellent tips Mister

[@akiyalove5751]

Let's try if it is work your idea is very good I have a big challenge about this for long time but couldn't find out of the problem I pray your ideas work for me

[@khansk36]

Thanks for sharing

[@spiritawahili213]

excellent job my friend... very professional and covered every point. keep up the great work.

[@starz3893]

Great tutorial 😃😃😃

[@GalaxyWhimsy]

Thank you for taking the time to make such informative and useful videos for maintenance of the clippers! you've helped me so much! i appreciate you!

[@tetonjuggler1179]

SAVED THE DAY!

[@johnwalker8194]

Five and a half years later you were there when I need you most! I know how to fix things but these clippers have frustrated me so, that I seriously considered sending them to Wahl. I needed to apply 2lbs of pressure, pushing the armature down, but I was doing the opposite! Thank you, sir!

[@larrythebarberman]

Your welcome 👍

[@wael8061]

Larry I need you to modify my clippers for me !! 😭😭

[@82fatman]

Thank you mr barberman 🐐

[@JaredLil2000]

Huuuuuge life saver!! Could figure out what my issue was. Thank you! Also, uh, make sure to unplug before you crack the case open and start poking around. Here in the states it’s just 110, but over there 220 would fry the hair right off your...head...oh.

[@larrythebarberman]

JaredLil2000 Your welcome my friend - it should have been un -plugged , but I know what I am doing. Never the less you have to work with it live, to make the tension adjust anyways. Plus you are right working with 110v is nothing when you worked with the full force of 240v 😏

[@JaredLil2000]

Larry The Barberman oh, so it must be live/hot to adjust properly? If so, I reckon I need to do mine again

[@larrythebarberman]

JaredLil2000 live to get the tension, but not hot

[@andrewbentley1136]

Thanks!

[@Velaxity]

Hi, when setting the blades up I was told to set the right hand side a fraction higher than the left, as when the clipper is running it doesn't move in a perfectly straight line, because the armature is on a pivet.. When you do this and turn the clipper on and look at the blades, it appears to be a straight line. Is this true or is it an optical illusion? Thanks.

[@demodemo9698]

Hey Larry what is the name of that hand held blower? Thanks

[@_NEW3RA_]

My masters and BGR’s do that. Could this be the same solution even tho yours are seniors for my masters? The BGR’s are detachable blades. I oiled them and they still pull.

[@shannongay3102]

where do I get a mini vac like yours?

[@AnimeOfWisdom]

What do you think it would be on my cordless magic clips??

[@jbryzgaming2490]

Hi sir can you please do this with Moser 1400. Thank you

[@Belgason]

Thank you man !!! you save my clipper and my life to. I wanted to throw away my clipper. One love Pal

[@YG-uf7jv]

What kind of screws did you use to tighten it with? T20’s?

[@cabaelartemio1804]

Hllo sir,can i know how to make ziro gap a whall clipper 300 series. Pls. Sir!

[@JIKAUS]

Thanks Larry for your informative video. I learnt from you now how to adjust the clipper. Could you tell us in your next video what type of clipper oil we need to use and how much oil to put on clipper like one drop, two, three or what? Thanks.

[@chodaddy84]

Got a question.. my clippers get too hot to hold. Not the blades, any ideas what can be causing it?

[@ZuesRG]

Does this work with wahl Magic clips ?

[@jimkidwell4855]

Well done.

[@larrythebarberman]

Thank you!!

[@emirababur6073]

Thank you your videos helped me repair loudly my USA pet clipper

[@kzpylj7729]

My Remington buzzer has a very low buzz and pulls alot more than it cuts. I don't know what's wrong with it

[@4ksandknives]

Best video!

[@jasonw7243]

Great video, my seniors dont have the power screw on the side will this be located inside?

[@dude7124]

Have you found a solution?

[@jaw3895]

Very comprehensive, excellent explanation of the process and how clippers work! Thank you very much. +1 sub!!

[@larrythebarberman]

Thank you very much, for your kind words, it is truly appreciated - some viewers find my videos too long - but i believe my tutorials will help you solve more than the problem you clicked on the video to solve - by understanding what you are doing and why you are doing it and what the effects of the action will achieve

[@kincamell2]

Much Gratitude,

[@jordanwalsh7323]

My magic clips just stop working when I’m cutting hair I’ve to switch them off and back on for the blades to start moving I oil them before and after each use and made sure there no hair in the clippers would adjusting the tension fix this if anyone else has had this problem could you please give me any advice because I really don’t want to throw my clippers out

[@wendybell9007]

Such a clear explanation thank you

[@1533ramsay]

Thank you. Best explaination I've seen. Actually I need this for my dogs whal clippers. I'm sure it all the same... Thx again

[@25447carepear]

What screwdriver are you using?

[@TrippDon]

I don’t work for wahl, i expect it to work I’m on arrival, I just bought this clipper. Probably going to return it.

[@cdubthebarber4956]

What hair dryer is that??

[@kajalilovely878]

How to find in original whall michine video send pls

[@thebluethunderbunny2324]

I went to a barber about 3 weeks ago and he gave me a fade that made my head really inflamed afterwards. He used a 1.5 guard, so he did get pretty close to the skin, but my biggest concern is that ever since I got that haircut, I've had huge patches of missing hair that aren't growing back. All the inflamed areas basically now have hair loss. Do you think it could be due to his clipper yanking out my hair instead of cutting?

[@larrythebarberman]

Sorry to hear that !!! Well even if you had your hair waxed you would see re-growth. By now I would not like to speculate but inflation and non hair growth is associated with Keloids - but sounds like you need to seek professional help and actual consultation

[@bulltivation7846]

My Wahl Legend clipper from the black Legend combo (I guess is the same as the red Legend) pulls hair only with 0.5 and 1.5 guards on it... All the rest of the guards or no guards is fine... Why is that?

[@larrythebarberman]

Do they both have a smooth or roughy finish and are the teeth un bent or distorted?

[@edwardyazzie1429]

We'll done

[@ranjithwijesingha114]

You are welcome at all

[@abrahamhernandez9939]

can you do this to your wahl balding clippers

[@pavelmoldoveanu1278]

you can do the same with any wahl with the same magnetic configuration

[@TheMoonchild1969]

WARNING: ALWAYS DISCONNECT WHEN SERVICING ELECTRICAL EQUIPMENT!!

[@AbXul]

Where is your corrugated rubber mat from please?

[@AbXul]

Where’s it from though?

[@clivepoulter9308]

My wahl legend straight out of the box pulls hair too. Will this technique work for it aswell?

[@Cdmasphuck]

Clive Poulter I was actually trying to do a bald fade with no comb straight out of the box and yes I oiled it and it was pulling my skin why might that be yes brand new too.

[@Youtune5]

Did you try this technique? My 5 star super taper has been pulling my hair from day one

[@amoyzegh]

@@Youtune5 When you say pulling do you pulling where it hurts your hair or pulling in the way it's not cutting at all?

[@imdunnheir3633]

Thats not a hot knife through butter. Thats like a plasma torch through already melted butter. Very nice work, ill try that on my seniors. Cheers

[@kyleakasmok3244]

Why is there no video for a remington clipper

[@luis_flexing322]

Well I randomly put it on maximum power and got scared. I thought I was gonna hurt my self lol

[@royalmaster203]

great instructions, what's the purpose of the lever on the side of the clipper?

[@mad3arber]

It will adjust the cutting blade from a zero to a half blade.

[@royalmaster203]

@@mad3arber thanks

[@Stel_FPL]

Hi great video man.....but after unscrewing the 3 screws I can't even get the cover off even with a little force.? Any suggestions please.😅

[@larrythebarberman]

wiggle it a little bit

[@Stel_FPL]

@@larrythebarberman I managed to get it off but there's no adjust possible inside on mine. Newer version maybe.

[@larrythebarberman]

@@Stel_FPL Could be!! similar was done to the t outliner - we are living in a throwaway world

[@Iaintsayinnothin..]

how did you get the cover off, mines super stuck especially around the middle

[@amoyzegh]

@@Stel_FPL Does it work on the wahl senior cordless?

[@osagieaisueni5178]

What is the air blower thing called?

[@AbXul]

Osagie Aisueni Metro Vac - Sidekick Blaster maybe?

[@gerardoreyes9074]

Absolutely useful. No, thank you sir

[@DapperDavo]

Loosen the armiture screws in a clockwise rotation